So, I've been trying to use my BT headset and a voice recorder but Diamonds seems to use only its internal microphone and not BT's one. Jabra BT 3030 (dogtag) is the device I'm using. There are wireless stereo and handsfree profiles in BT settings which are both checked.
Why I can't record my voice with Jabra? Is there a software way to make it use Jabra's microphone?
Apart from this everything else (calls and streaming music) works fine.
No ideas? Anybody? I sent the problem to Jabra/HTC support but didn't get nothing concrete as an answer.
I can't believe that bluetooth device's microphone can't be used for recording?
The same thing worked on Symbian Nokia device I used before...
The answer...
is VJVolubilis
http://www.vijay555.com/?Releases:VJVolubilis
I tried it to make it possible to talk with voiceclips in the live messenger, trough the headset, works perfectly. Axel
I am trying to get ALL audio to my BlueAnt Interphone unit. Calls work fine on their own, with no extra audio enabled. Audio will come through OK until I either receive and finish a call or use Voice Command, then it goes to the phone speaker. I have tried using BTMusic, BlueMusic and BTAudio and they are all good at putting audio to the headset but only BlueMusic returns the audio after the call, the others drop out after any other activity. Strangely BlueMusic will return the audio to the headset after a call, but it doesnt allow the call audio through to the headset, it can only be heard on the phone speaker. Searching the forum doesnt seem to show this problem, although several are close they dont provide a solution, though they did provide the info regarding the software choices. I have set the Bluetooth settings with Kaiser Tweak.
Currently running the HTC WM6.0.
Any thoughts or suggestions?
Cheers
I've got a bluetooth headset (Nokia BH-503) which works great for calls and music.
However, I tried using it with the Teamspeak app, and found out the voice is still being recorded from the phone mic itself.
To add on this, when I try to record (with the built in app) or use voice commands - It doesn't work (It doesn't record through the mic. It just doesn't work at all.)
Is there a way to use a BT headset as a mic outside of calls? It's obviously possible, since it works on calls, but what about everything else?
Throwing this out there because I don't know if this is a ROM issue or kernel function.
(Specs in sig)
When I use the BT in the car MY voice is transmitted to my audio system as if its playing back media. This is not what some would call "echo" in normal working BT setups. It's my actual voice being transmitted through my audio system. Far louder than the person on the other end. Of course that causes issues then with feedback into the car mike. My voice is amplified a lot louder than the callers.
Is there a setting on the phone or is this a ROM, Modem or kernel issue.
EDIT
FIXED In case anyone else has this issue. I have Call Recorder Pro and I neglected to check the "off when BT is being used" box. Apparently it disallows the voice to be muted over BT when its in the BG,
OOPS!
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
michaean said:
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
Click to expand...
Click to collapse
As far as your wired headset issue, it does not happen on my r1 or my sisters r1. Your phone may just be defective in some way. I have called people successfully using a headset
Having same issues and found that by doing a reboot or restart I can correct them. But it comes back later. Irritating!
I see this too often as well. Restarting the speaker doesn't help - I have to reboot the phone to get it working again. It's very annoying as the built-in speaker is so bad that I always want to use the Bluetooth speaker when I'm home.