how to Install wm6 on htc himalaya - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

hi everyone
anyone give me a link how to install wm6 on htc himalaya step by step
or any one guide me how to install????????????

i think this is ur first post..when u download a ROM..u will get all the instructions with it..if u get stuck some where just PM me or ask me here

my radio ver is 1.14.00
first i unlock phone and how tools usage? after unlock dowload rom and upgrade?

no need to unlock or any thing...if u want to extend your storage then u use the tool but if u dnt want to then just upgrade...

go here for instructions on unlocking and increasing
http://forum.xda-developers.com/showthread.php?t=332215

ok i read about unlock but guide say its method only 1.05.xx radio version
how i unlock my radio verison is 1.14.00
and extend space unlock is requierd for windows mobile 6?
or just download rom and just uparade bootloader method no cid no simunlock
???????????????

which device are u using...there is no CID unlock for Himalaya Devices...

hi i choose Syed Ather's WM6 ROM for HIMA basic vesrion
no need extend space just download extaxct and goto bootloader mode and upgrade????????????????becasue i dont want extend space

i would prefer WM 6.1 ... as its the latest ..

deadtorightx said:
hi i choose Syed Ather's WM6 ROM for HIMA basic vesrion
no need extend space just download extaxct and goto bootloader mode and upgrade????????????????becasue i dont want extend space
Click to expand...
Click to collapse
did you finally unlock your sim/radio from your provider? you can read the tutorial in this link: http://forum.xda-developers.com/showthread.php?t=223853
you don't need to upgrade your radio in flashing new roms!
unless after flashing new rom, you can't make a normal phone call..

Related

SOLUTION FOUND -CID/sim UNLOCKING FOR WIZARD WITH AKU2 ROMS.

warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^

need help on CID unlock

imate k-jam
rom versio: 1.5.4.2
WM5
how can i upgrade it to WM6?
i need to unlock the CID, but how?
please help me.. thanks!
Read the two Stickys at the top of the forum page!!!!
Or -- READ THE WIKI!!!!!
i done it. but still, i doesn't unlock the CID.
i can't install a new rom version (it install it fine but looks the same as WM5)
do you really want to unlock?
whats your purpose? to upgrade to newer OS?
you can use shelltool to upgrade without unlocking..

help!!! need english leanguage for my imate k-jam

sorry if i ask vry stupid question because I'm new and can someone help me
i need a new soft or ROM vich can make my device ENGLISH and not rusian.
only what i need is to change a lenguage. i need ENGLISH language
plz plz plz heeelp!!!!
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
starkwong said:
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
Click to expand...
Click to collapse
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
You DID NOT CID unlock your device.
siemensfun1 said:
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
Click to expand...
Click to collapse
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
zabardast_1 said:
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
Click to expand...
Click to collapse
ok thanks!!! i'll try to upgrade my device tonight.
thanks all who try to help me.
sorry about my English.
i,ll try to update but language is still russian an ROM is still same.
I download thes file: RUU_NoID.exe, then i download an oficial ROM, then i replace the original ROM's RUU with RUU_NoID. operation begin, but after and of this nothing change.
ha can i change language for English? can anyone help me an give me a links of this files vich i can use???
my IPL/SPL is 2.16 and i think it is G3???
plz today i must do this i need help!!!
XDA-developers plz help me!!!
Well,I'll suggest you go for the second option,unlock your phone and upgrade to any latest wm6 custom build Roms.Once you get your phone unlocked,it stays unlocked and gives you the opportunity to keep on upgrading to the latest Roms and features.Read the stickies on unlocking and upgrading and do it correctly,I'm sure you'll have much more benefits and enjoyment.
Cheers !
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
siemensfun1 said:
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
Click to expand...
Click to collapse
ok,grrrrrr8,if you have managed to downgrade to ipl/spl 1.xx,its time to SIM/CID unlock the phone,read the 'definitive guide for unlocking by Dr.Puttingham and download the lokiwiz-2b tool and do the method exactly as stated in the guide to Sim/CID unlock your phone,after successful unlock upgrade to ipl/spl 2.xx by downloading and flashing T-mobile 2.26 to the phone,only then you can upgrade to any latest wm6 rom,as its required to have CID unlocked phone and ipl/spl 2.xx for upgrade to wm6.
Good luck
& 1 question again.
if i uogarde my device with T-mobile ROM 2.26 and want to upgrade again to WM6 i must unlock CID again??? or i can upgrade ROM without it???

Before Unlocking and Flashing...

Ok, so I have been reading through the forum and the wikis. I think I am more or less now ready to unlock and flash my phone with the latest rom. Just a few questions before just to make sure I got it all right before I do anything and completely kill the phone. The PDA I have is from an Orange UK contract.
WM 6 CE OS 5.2.1620 (Build 18125.0.4.2)
Operator Version 24.181.1.612
Rom Version 1.81.61.2 WWE
Radio Version: 1.27.14.32
Protocol Version: 22.45.88.07H
So step 1) Install HardSPL (kaiser-HardSPLv1.zip, is the latest version right?)
Step 2) Run Kaiser SIM/CID Unlocker & Changer (latest version is 2)
Step 3) Install the new Rom (3.03.405.0 (Radio 1.64.06.04) updated original WWE)
Step 4) Do a Hardreset
So if I follow this process, with the help of the wikis it will unlock my phone and allow me to install the latest rom? Could you also tell me if I am running a correct version of Windows because I read somewhere I have to downgrade to version 6.0. Secondly, is the rom I have chosen above the correct one for my PDA? Thank you, all help appreciated. Sorry for being such n00b.
http://forum.xda-developers.com/showthread.php?p=1790046#post1790043
basically just follow post 3...once u do it once right u will do it more often and get used to it...the first time i had to read over the steps a few times just to familiarize myself with it..now its just download the rom and flash away...
in case u do flash more...u dont need to hardspl each time...once is good for life
thanks for that link. I read through it before my post. So do I just need to run HardSPL once and then flash the new rom. Or do I also require to run the SIM/CID unlocker changer as well?
see post #2 in the link bapssystupr3m3 posted
k thanks, the way I have understood is that HARDSPL will do a CID unlock (not a sim, if I am not mistaken) and I will just have to use the SIM unlocker to sim free the device. Then off to flashing the rom with the version I described above.
its a bit more complicated with an orange phone mate. You have to SIM unlock it first to flash with a different radio and if you flash to WM6.1 you need a compatible radio...
sim unlocking is not that complicated and I managed it with the details on this forum, there is a bit thread about it somewhere...
Got my orange kaiser in the afternoon, by early evening I had unlocked, flashed, new radio and was happy.
The actual process of flashing a new ROM is pretty simple when you have done it once.
right, having a read through this "Guide on how to unlock an Orange TYTN II by UKBATMAN" (http://forum.xda-developers.com/showthread.php?t=357592&highlight=orange) It says "use OliPro's SIM/CID Unlocker or Jockyw2001's SIM Unlocker". I have already downloaded OliPro's latest version so I am assuming I can just run this application and it will sim/cid unlock my phone?
I used this http://forum.xda-developers.com/showthread.php?t=361039

t-mobile mda problem

i have t-mobile mda that stuck in first screen , i tried to format it but it show me format failed
any solution
Format failed?
Does you got more info men?
About what you have tryed to upgrade, ipl spl info rom radio etc etc
have you try to reflash it with an original ROM... again...
have you remember if it is cid sim unlocked?
I recommend you to get a batt charger cause it will die without charging.
u need more info
customer give me it stucking in splash screen that all
when i enter to bootloader it show me : ipl 1.01; spl 3.08
Download 'Button's Rom 1.05' and try to flash it in Bootloaders and get it load up to Working OS,after that download 'WST_4.2.2' tool and CID unlock the phone.
After CID unlock you can flash any latest custom build wm6 rom.
You can try to download and flash the official stock rom,but as it has SPL 3.08,it won;t flash and give error.So try to flash Button's Rom a couple of times,hope it'll work.
zabardast_1 said:
Download 'Button's Rom 1.05' and try to flash it in Bootloaders and get it load up to Working OS,after that download 'WST_4.2.2' tool and CID unlock the phone.
After CID unlock you can flash any latest custom build wm6 rom.
You can try to download and flash the official stock rom,but as it has SPL 3.08,it won;t flash and give error.So try to flash Button's Rom a couple of times,hope it'll work.
Click to expand...
Click to collapse
where i can get 'WST_4.2.2' tool
hbstun said:
where i can get 'WST_4.2.2' tool
Click to expand...
Click to collapse
yeh... everywhere is only name 'WST_4.2.2' bud insn´t link to download
(Is this programe for G3 chips, too???)
zabardast_1 said:
Download 'Button's Rom 1.05' and try to flash it in Bootloaders and get it load up to Working OS,after that download 'WST_4.2.2' tool and CID unlock the phone.
After CID unlock you can flash any latest custom build wm6 rom.
You can try to download and flash the official stock rom,but as it has SPL 3.08,it won;t flash and give error.So try to flash Button's Rom a couple of times,hope it'll work.
Click to expand...
Click to collapse
and how to use wst because phone can be detected only in boot mode
Xpended time to search..........
45 seconds!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
My men!!!! can you just take a little time? and go to tab SEARCH!!!
this is the link, the utility is attached on first post.
http://forum.xda-developers.com/showthread.php?t=329170
Feeding who no wants to search and expend a little time and has a problem!
But you're welcome this is our job right here.
So first let your phone with a functional ROM then use WST 4... if the program dont works on activesync just put it on bootloader mode holding camera button then rest... wait for the RGB screen and then release the camera button.
Sorry for that.
hOHOHOHOOHOOO
unlock from imei-check.co.uk -> flash from SD card
and now it is OK........ but only pay 20 pounds .......... but better that has got a brick
i don´t know about another free way
Yep
BongomanCZ said:
hOHOHOHOOHOOO
unlock from imei-check.co.uk -> flash from SD card
and now it is OK........ but only pay 20 pounds .......... but better that has got a brick
i don´t know about another free way
Click to expand...
Click to collapse
You're right... everybodys got a free choice.

Categories

Resources