Related
warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
Click to expand...
Click to collapse
I would be very thankful if you could post a link or send me the ROM upgrade Utility needed
best regards
Bayardo
risidoro said:
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
phone_one said:
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
Click to expand...
Click to collapse
The modified RUU (ROM Update Utility) is attached.
For ModelID you can use both WIZARD or Prodigy (i used the former).
risidoro said:
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
sorry to hijack your thread,
just wanted to ask a short question.
if my info is as below:
US T-mobile MDA Vario
IPL 1.03
SPL 1.06
GSM 01.12.10
OS 1.3.13.5
ROM version: 1.3.13.5 ENU
ROM date: 9/29/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtROM: 1.3.13.116
OS 5.1.70(build 14406.1.1.1)
Click to expand...
Click to collapse
does this mean that its on a G3 chip and that i can use lokiwiz03a to CID unlock it and upload any 2.x ROM as i please? and downgrade the ROMs too?
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
I've just published a tutorial that can help those with a G4 or G3 (>= 2.21) CID-Locked device to install whichever 2.x ROM they like.
The tutorial is here:
http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
risidoro said:
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
Click to expand...
Click to collapse
thanks risidoro.
i'll give it a go later.
there wont be any issue downgrading the ROM later would there?
eg if i were to install:
RUU_Wizard_2211301_22113102_021911_DOP_ASIA_WWE_Ship.exe
Click to expand...
Click to collapse
and later back to
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe ?
Click to expand...
Click to collapse
oh, the bootloader (IPL/SPL) doesnt get upgraded either when i upgrade, would it?
oh thank for the help risidoro.
i saw your post after i uploaded mine.
read through your tutorial and i figured that both IPL / SPL will get updated
people like you makes this site great
thanks once again.
Just after I got my 8125 I upgraded the ROM to 2.25. I didn't unlock anything. Its running fine. Now I'm interested to try a different ROM. I understand I will need to CID unlock my device. Here is where I'm confused, if it is possible or not after upgrading to 2.25? Can I follow the steps to downgrade my ROM and unlock the CID?
I have searched and been reading alot but I'm still a bit confused, so please be gentle as I ask for some guidance. I have experience modifying Motorola phones, but am new to PocketPC. Any help is appreciated.
Good if you can provide info on how you upgraded your unit (e.g. with the providers official ROM or with the software and ROMS in this forum, etc)
And how you intended to down grade your ROM? You also mentioned the 'steps' to follow, of which steps are you refering to?
And, why do you want to have your phone CID unlocked? CID lock will not bug most people unless they are going for a ROM flashing. CID lock is different from `phone lock` or `SIM lock`.
Just incase you are wonder, what is CID, ... don't ask me. I have no idea at all Seriously.
I upgraded a stock 8125 (G3) to the Cingular 2.25 official ROM. I would like to install a summiter or mr. clean custom ROM. Searching through the messages here I'm unable to determine for certain if I'm able to CID unlock from 2.25 on my own (for free), but I get the impression I cannot. I just want to know for sure before attempting anything further.
I won't need step-by-step instruction...just need to know what my options are at this point.
Last nite I tried to install the summiter ROM without the bootloader. And the install went fine and completed 100% without error. But after the reboot I found the flash didn't hold, it was basically like a hard reset.
First download and install the Cingular 1.8 Rom
If that works fine then you should be able to CID unlock.
If not then try downloading and installing the "Button 1.05" Rom.
If either of these dowgrades worked for you, searck for LokiWiz (use ver 0.2 for CID unlock) and follwo the instructions.
Next if you want to SIM Unlock find LokWiz MSL 0.3 as it does a better SIM unlock than the older LokiWiz. Again follow the instructions.
Now you should be good..
Sorry if I wasn't clear, but its the downgrading I am concerned about. I'm not certain if it is possible to downgrade (including bootloader) from 2.25 without the device being CID unlocked..?
Stinkfist said:
Sorry if I wasn't clear, but its the downgrading I am concerned about. I'm not certain if it is possible to downgrade (including bootloader) from 2.25 without the device being CID unlocked..?
Click to expand...
Click to collapse
Having a G3 device you can downgrade.
You must downgrade to CID unlock unless you want to pay imei-check $40.00
kyphur said:
Having a G3 device you can downgrade.
Click to expand...
Click to collapse
Perfect...I will try it.
You must downgrade to CID unlock unless you want to pay imei-check $40.00
Click to expand...
Click to collapse
Yeah, that much I do understand. I definately want to avoid paying to unlock.
Thanks for your help! I'll let you know how it goes.
Success! SIM/CID unlocked.
IPL 2.24
SPL 2.24
GSM 02.25.11
OS 2.24.10.1
Thanks kyphur, for taking a moment to point a noob down the right path.
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
As written before, u need AKU 1 to CID unlock your phone..the only way to be sure is to unlock again. Use buttons rom.. downgrade to that... unlock the phone.. install the rom again so the IPL and SPL are the same..then you can switch to whatever rom you want. How ever, you havent shown what type of Wizard you have whether its a G3 or a G4..the above method is what i used for my G3 Wizard
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Bonusbartus said:
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
Click to expand...
Click to collapse
1. Thank-you for posting in a new thread and not in a ROM release thread.
2. Do you have a G3 or G4 (what is your IPL/SPL?)
2a. If you have a G3 read the Sticky post The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards.
2b. If you have a G4 log onto the IMEI pay site (links all over the place) and pay to get your phone unlocked.
3. IF you have a G3 rom you must downgrade to CID unlock. It isn't possible to CID unlock from AKU2 or higher (read the sticky, it tells you what you need to do)
4. The best thing to do if you are unsure is to just repeat the unlock procedure. It won't hurt a thing if you are already unlocked, but will unlock you if you are locked.
5. Don't do anything flash related until you know for sure, beyond a doubt which version of Wizard you have (G3 or G4) If you have a G4 and use G3 procedures you WILL most likely ruin your device.
6. You won't get this error if you follow the steps in the correct order from the upgrade guide.
7. Good Luck
Bonusbartus said:
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Click to expand...
Click to collapse
With your G3 just follow the steps, in order, from the sticky and you should be able to end with whatever ROM you choose. Some of the steps may not make sense but, they are necessary and prevent common issues if followed correctly.
Well, I do have a G3 so I can follow the tutorial,
ipl and spl are 2.18,
only question left, CAN I downgrade to the wwe rom in the tutorial? that's what I wanna know, because I now have a nld rom, can I flash to the wwe rom in the tutorial without CID-unlocking?
well I think I just try
thanx
oh btw, any recommendations on which rom to flash to after unlocking? and I saw something about radio only roms and page-pools what would u recommend there?
sorry if i ask vry stupid question because I'm new and can someone help me
i need a new soft or ROM vich can make my device ENGLISH and not rusian.
only what i need is to change a lenguage. i need ENGLISH language
plz plz plz heeelp!!!!
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
starkwong said:
Just check your device if it is G3 or G4, then either Unlock or HardSPL/SoftSPL your device and flash one of the Wizard English WM5/WM6 ROMs available.
Click to expand...
Click to collapse
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
You DID NOT CID unlock your device.
siemensfun1 said:
plz I'm new andi dont know how to know my device is G3 or G4 and i download official `ROM 2.16 WWE but when i begin update hi wrote that
"INVALID VENDOR ID"
plz help!!!
ok i think my deice is G3 bucause when i sturt up my device ISP/SPL is 2.16. is this G3???
Click to expand...
Click to collapse
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
zabardast_1 said:
If you have downloaded official Rom from it's website and still can't upgrade then use the 'ROMUpdateUtility_Wizard_NoID' replace it with the ruu in the official rom,you can get this from the below link.:-
http://forum.xda-developers.com/showthread.php?t=291215
or as starkwong has suggested,you can CID unlock the phone and upgrade to any latest custom build wm6 english roms.To unlock read and correctly follow the method as explained in the stickies for unlocking and upgrading in the 'wizard upgrading forum'.
cheers
Click to expand...
Click to collapse
ok thanks!!! i'll try to upgrade my device tonight.
thanks all who try to help me.
sorry about my English.
i,ll try to update but language is still russian an ROM is still same.
I download thes file: RUU_NoID.exe, then i download an oficial ROM, then i replace the original ROM's RUU with RUU_NoID. operation begin, but after and of this nothing change.
ha can i change language for English? can anyone help me an give me a links of this files vich i can use???
my IPL/SPL is 2.16 and i think it is G3???
plz today i must do this i need help!!!
XDA-developers plz help me!!!
Well,I'll suggest you go for the second option,unlock your phone and upgrade to any latest wm6 custom build Roms.Once you get your phone unlocked,it stays unlocked and gives you the opportunity to keep on upgrading to the latest Roms and features.Read the stickies on unlocking and upgrading and do it correctly,I'm sure you'll have much more benefits and enjoyment.
Cheers !
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
siemensfun1 said:
zabardast_1, thank,s I downgrade my device to 1.01 but SPL is still 2.16, but i dont done lokiwiz2b
I have 1 question, if i downgrade SPL to 1.01 and both IPL/SPL will be 1.05
then can i upgrade my device with an oficial rom 2.16 WWE???
plz answer my anyone i dont know what to do
so now i done everything now my SPL/IPL is 1.01.
and can now i upgrad my device with WM6 or WM5???
thanks all !!! it's graet forum. thanks XDA-develelopers and all who write this programs. all you are best friends
Click to expand...
Click to collapse
ok,grrrrrr8,if you have managed to downgrade to ipl/spl 1.xx,its time to SIM/CID unlock the phone,read the 'definitive guide for unlocking by Dr.Puttingham and download the lokiwiz-2b tool and do the method exactly as stated in the guide to Sim/CID unlock your phone,after successful unlock upgrade to ipl/spl 2.xx by downloading and flashing T-mobile 2.26 to the phone,only then you can upgrade to any latest wm6 rom,as its required to have CID unlocked phone and ipl/spl 2.xx for upgrade to wm6.
Good luck
& 1 question again.
if i uogarde my device with T-mobile ROM 2.26 and want to upgrade again to WM6 i must unlock CID again??? or i can upgrade ROM without it???