Related
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
Hi, I´m from Spain . Thanks for read this thread
I have a problem with my HTC Diamond. It was working very good with a cooking rom but after upgrade with the new original version from HTC don´t work GPRS connection.
I tested first with hard reset and second ,changing differents radios and spl in the way to found an answer for my problem but I didn´t found it.
I was checking the connection data from Orange calling him and calling HTC support directly. I thinked that it was wrong but I saw all was correct.
I created the connection manually first but it didn't work. After it, I erased all the connection, then I did a hard-reset and finally I created a new connection with automatically HTC Connection setup chosing Spain-Orange, but it did´t work either.
I was looking for this problem in the forum and I tested to flash again the mobile with the update 2.03 rom and after it made a hard-spl and write another radio without success.
I tryed too with Wifi Profiles cab like I read in another thread without success either.
I have not installed any program like "nodata" to cut the gprs connection.
I get always the same pop-up. "..... can't connect... unkown reason....."
Please Is there any way to fix it???.
Thanks in advanced
I had exactly the same problem immediately after upgrading to the 2.03 rom, it made me crazy I tried everything, I even thought having disabled gprs with no-data the day before the upgrade screwed something up but in the end I called my provider (Telia-Sweden) and they re-activated the gprs data account and it's been working fine since then
Very weird but I'm glad I made the call.
Thanks owziee for your quickly answer, . I was speaking with Orange to re-activated the data service and they did it. Before it I went to an Orange distribuitor shop to upgrade my sim-card for if it could be an incompatibilty between the phone with the card
New sim-card. New re-activated service and it still not working.
HTC told me that it could be by a corrupted data in the WM and they think it can be fixed flashing again the phone to update it in a service center.
I was thinking about it and sincerelly I have a dude for if I have used the correct spl and radio flashing the phone.
I made hard-spl sometimes. I used differents files but always unsigned spl.
At this moment I am trying "1.93 signed" without success.
The file I use to update the phone is:
_HTC Touch Diamond_MRII_RUU_Diamond_HTC_SPA_2.03.412.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
Please, What could be the way to fix it??
Thanks in advanced for your answer..
WondiW
I still thinking about my steps....
Uhmmm, could it be by the method used for unlock it???
I remember that I unlock it but I press to write CID to 00000 too.
Is there any method to calculate the CID to write again for it is the problem???
I don´t know what I must to do. I have tested some minutos ago the htc rom 1.93 version without success.
Thanks again
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
gotta be weird issue??? ATT tilt (ROM BRR-ATT-2.5_100208)
3 nights ago my Tilt went crazy... right, suddenly the dialer started to show "cde" where it shows the dialed numbers, than all the keypad just stopped working, actually only the navigation button and the power, only those 2 work but the rest they just dont work at all, and also i noticed if i use the virtual keypad on the screen, if i wanna delete something i just cant, and also the voice recording goes on after turning on my tilt, i did soft reset, hard reset, flashed with couples original ATT ROM ship, reflashed with original Kaiser WWE ROM and nothing, tried other few ROMs and nothing, nada fix it... any1 out there plsss that could help....
i was wondering if i instal back WM 6.0 or 5. than go back o 6.1, i mean if its possible or not and if that could help or not, i am going crazy ‘cause i need my phone back...
help plss, thanks a lot..
couldnt find any link...
a link in here where i can read info about how to reflash it to ATT ROM for warranty and else, anybody plsss...
thanks...
artie.ale said:
a link in here where i can read info about how to reflash it to ATT ROM for warranty and else, anybody plsss...
thanks...
Click to expand...
Click to collapse
Updated: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return
Hi guys,
I have a weird problem.
As of recently two days ago, my tilt won't take any flashes anymore. I believe with was caused by an action of mine which I tried flashing android from SD to NAND.
Here are the symptoms:
1) After a failed attempt at loading the Android Kernel, I installed the stock HTC ROM (Kaiser_HTC_ASIA_HK_WWE_3.34.721.2)
2) The stock rom flash worked, but any subsequent flash do not work
3) When trying to flash (either from Active Sync or SD Card) it gets stuck at 0%
Current state is as follows:
1) Phone boots up normally with stock rom
2) I can get into Bootloader mode no problem
3) When trying to flash it doesn't work
I have tried several steps in order to recover.
1) Tried to flash Stock rom again (Faillure)
2) Tried to flash HardSPL again (Faillure)
3) Tried MTTY 1.42 (Don't know if Success or Faillure) - I have attached the screenshot below
I have been successful in flashing multiple custom ROMs before, but idiot me wanted to try the android and now I messed my phone up. I guess it's true what they say: "If it ain't broke, don't fix it!"
Anyways...
So it seems to me, the connection is getting done but nothing wants to be pushed.
Here are my credentials:
PC:
XP Service Pack 2
Phone:
ROM Version: 3.34.721.2WWE
ROM Date: 09/30/08
Radio Version: 1.70.19.09
Protocol Version: 25.83.40.02H
HardSPL 3.34
So my question is, do you guys know how to get my Kaiser working again?
Do you recommend in attempting Android on Kaiser again or leave it be?
Any help is greatly appreciated in clarifying this out.
Dave.
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
tsiftis21 said:
Sorry for some reason I cannot post link to images. Does anyone know how to do this as well?
Click to expand...
Click to collapse
You can just dont put http or wrap it in code and it's due to limitation on accounts to prohibit spam untill you reach a ceratain ammount of posts.
Screenshots
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
tsiftis21 said:
Thank you for the tip!
Code:
[IMG]http://a.imageshack.us/img806/7494/clipboard01ytn.jpg[/IMG]
[IMG]http://a.imageshack.us/img412/3866/clipboard02ml.jpg[/IMG]
[IMG]http://a.imageshack.us/img192/6405/clipboard03bx.jpg[/IMG]
[IMG]http://a.imageshack.us/img809/4079/clipboard04r.jpg[/IMG]
[IMG]http://a.imageshack.us/img835/3858/clipboard05nr.jpg[/IMG]
Click to expand...
Click to collapse
remember to take out your sim and sd card while flashing.
Mr. Clown said:
remember to take out your sim and sd card while flashing.
Click to expand...
Click to collapse
I had tried without the sd card, but I had forgotten to take out the sim card.
I tried without the SIM card and the same result is present. Won't go past 0%.
Any other ideas?
Does any one have any ideas how I can get my tilt up and running again? Any help would be greatly appreciated.
Thank you
I get the same issue...
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
tstaddon said:
Word for word, the same as this.
Operator 24.328.1.610
ROM Version 3.28.61.0 WWE
Date 05/02/08
Radio 1.55.16.25
Protocol 25.83.40.02
I've tried several PCs, ActiveSync doesn't work at all, Windows Mobile Device does.
SPL 3-27 is on the phone but I've tried running the others without success. I get up to 17% on any ROM if using JumpSPL1.93-KAIS.exe but that's about it.
This is a work phone which is on the Orange UK network (corporate contract), it's playing silly beggars (not ringing when someone phones, but helpfully telling me I've had a missed call).
According to Orange the only thing they'll do is swap it like for like... but I'm 99% certain the problem is down to the ANCIENT firmware on the phone and Orange have confirmed they've got no plans to update it.
Click to expand...
Click to collapse
I had this on my tp.
My usb was dying out, i ended up switching my tp with the one of my brother cuz my brother got a galaxy S.
Try if active sync works properly and keeps connected for 15 mins or more.
My connection kept getting lost untill eventually no pc would be able to reconize my phone.