Related
hello everybody,
i was stupid enough too change a running system... after i succesfully upgraded ROM and extended ROM with molskis versions, and everything still worked, i really did something very stupid... i applied an old spb-backup, hoping that this way i wouldnt have to do all the settings and applications again.
however, after a reboot, the following was shown:
ipl 2,21,0001
spl 2,21,0001
gsm 02,25,11
os 2,26,10,2
but after that, nothing else but white screen.
when i now try to hardreset bei holding the two buttons (connections and voice dial) nothing changes. i also removed the battery, just to have tried this option
now my question: does anybody have an idea?
or: what will it cost, to let this being repaired by o2? (my provider)
thanks in advance
boot into bootloader.. flash new ROM..
do a search on how to..
thanks a lot!
and i thought i'd have to send it to them
mille grazie
well did you get it fixed ?
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
Hi,
I just flashed Pdavietv 65.
After 10 minutes of using it, I locked the phone using the WM lock.
When i wanted to unlock it, the screen doesn't respond anymore.
I did a hard reset, I can't type anything on the screen, screen doesn't feel my fingers....
Anyone has an Idea?
I try to flash stock rom right now...
Sorry for my bad english
darkblue68 said:
Hi,
I just flashed Pdavietv 65.
After 10 minutes of using it, I locked the phone using the WM lock.
When i wanted to unlock it, the screen doesn't respond anymore.
I did a hard reset, I can't type anything on the screen, screen doesn't feel my fingers....
Anyone has an Idea?
I try to flash stock rom right now...
Sorry for my bad english
Click to expand...
Click to collapse
Flash another rom from the tri-color screen.
I just flashed the frenck Stock Rom From HTC.
I can't access.
When i 've the screen 'tap the screen to align screen', Nothing happens when i Touch the screen.
Only vol UP and down and power off are working....
Any solution?
Thanks
I think your digitizer unit died..get one one ebay and replace it
try fresh a stock rom which includes SPL as well.
mcdull said:
try fresh a stock rom which includes SPL as well.
Click to expand...
Click to collapse
You have a link please?
darkblue68 said:
You have a link please?
Click to expand...
Click to collapse
Try Putting your Phone in BootLoader mode.
Flash it with HARD SPL1.56
Then Try Installin a Fresh firmware again, a Hard Reset n it will be fixed.
I did all of this...
Nothing, I think I must send it to HTC...
I think your HD died touchscreen . You need to bring the HTC Service Center for repairs. If you is bought on ebay then there will pay for about 200 USD
My Touch HD just died
R.I.P. !
Damn all was working nice.
I did nothing.... Only flashed all days another rom
And when i wanted to call a friend yesterday,the screen didn(t respond anymore....
Grrr, I will send it to HTC this week, and i will by a Topaz One...
Leo is too big for my pocket....
ancola66 said:
I think your HD died touchscreen . You need to bring the HTC Service Center for repairs. If you is bought on ebay then there will pay for about 200 USD
Click to expand...
Click to collapse
DIY for 30 USD..ebay the spare part.
Had one same condition and fixed flashing with an original rom. Radio+Rom and Align screen on startup/\
I was in same condition as yours ,When in typped align scren nothing but after flash and a hard reset everything getback
Me, nothing after flshing original Stock ROM and originalHSPL.
But solething is very strange.
When the backlight power off (the dimmer), it comes back when i hit the screen... But i can't align the screen, the screen doesn't recognise my touch.
Why the dim is working when i hit the screen ans my gesture are not recognised?
Thanks a lot
Greats from France
It looks like only the alignment of the screen is wrong. Why it does not get fixed when flashing original ROM is strange. But the fact that the screen response to touch (returning from dim) should mean that the digitizer is OK.
Yes I think the digitizer is OK.
But I don't know what the problem is.
I will try to reflash tomorrow a custom Rom without align to screen at first boot....
Thanks
try mtty to completely erase ur internal memory..
then flash stock rom..
Ok, a few simple queries to help solve your issue. I'm assuming you used USPL or HSPL before flashing rom? and correct version of HSPL? Can you still access bootloader? What is your SPL?
If you can access bootloader, all is not lost and your device is not bricked.
I'd recommend flashing original stock rom onto your device and starting from fresh. Stock roms can be found in the wiki here. Once you have restored stock rom and if you still want a cooked rom, follow thisguide.
Let me know the answer to the above queries and how you get on.
Hi,
I used the SPL by Olinex.
Now i revert back to the original SPL.
When i enter in booloader mode, I can see: SPL-1.54.0000
Is this ok?
Before flashing the origal SPL i flashed the original French Stock ROM.
What is MMTY ?
Thanks
darkblue68 said:
Hi,
I used the SPL by Olinex.
Now i revert back to the original SPL.
When i enter in booloader mode, I can see: SPL-1.54.0000
Is this ok?
Before flashing the origal SPL i flashed the original French Stock ROM.
What is MMTY ?
Thanks
Click to expand...
Click to collapse
Solution should be found here including MTTY info & instructions. Same method for HD
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Are you sure the hspl update was successful? What spl version is currently showing on your device?
yes hspl was successful
manbir said:
yes hspl was successful
Click to expand...
Click to collapse
What spl is showing?
manbir said:
hi,
i got oner htc hd i hard spl it and the upgrade it to windows 6.5 all was working fine but it hangs a lot the i flashed it with windows 6.1 rom then the problem came was that all is working fine but i am unable to turn phone on to acess network on phone then i updated it ti the same rom i firstly used the problem was same then i update its radio then also problem was not solved then i update it other 6.5 rom but the problem is same phone doesnt turn on so that i cant acess network plz help me its very urgent for me
Click to expand...
Click to collapse
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Matthes42 said:
Perhaps you could give a bit more information about your issue. Interesting would be:
do you get the window to enter your pin?
and do you get any error message?
Click to expand...
Click to collapse
i dont get any error and it is also not asking for any pin
its hspl is 1.56 olinex
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
ClydeB1 said:
Ok, so you have the right spl, so that is not the problem. To understand you, you say that you can not activate the phone? Does the phone stay in flight mode? If you go to Settings (Manila tab)\Wireless Controls and turn the Phone slider on, does it turn itself off again?
You can try to run the setup again. Go to Start\Settings (All Settings)\Connections\Connection Setup and make sure your Country and Operator are correct and press Ok to setup.
Click to expand...
Click to collapse
am unable to turn the phone on rest all settings of country operator also ok
Is your device perhaps not SIM locked? What rom did you have originally? Have you tried to reflash to that original version and see if the problem is resolved.
When you first flashed to the 6.5 rom did the phone work then? I know you say you had lots of freezes, but before that did the phone work on the 6.5 rom?
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
miniterror said:
sounds to me like a providerlocked phone
as he stated in his first post that he also flashed back 6.1
Click to expand...
Click to collapse
manbir said:
yes i flashed back to 6.1 but phone is not provide locked its phone is not turning on and i have cheked that all sims were working fine
Click to expand...
Click to collapse
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
ClydeB1 said:
Thanks I saw that you did try a 6.1 rom, but I was asking if you tried the initial original 6.1 rom. You may have tried another 6.1 rom but not the original rom that was on the phone before you started flashing.
To my other questions then, did the phone initially work when you first flashed to the 6.5 rom? If after all of this and it was initially working on the 6.5 rom, you may have a hardware problem and may need to flash back to the original rom and take it back to HTC for a service.
Click to expand...
Click to collapse
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
manbir said:
yes the phone was working fine when i firstly flashed to 6.5 rom and its not hardware how can i know which was original rom now at this condition???
Click to expand...
Click to collapse
You can try going to the HTC website for your county and look to see if there is a rom upgrade available. If so you can enter your Serial Number to see if you can access it for download. Alternatively you can look for a stock rom here Try and find a friend near you with the HD and check their version.
Same problem here .....my wifi cant connect to anything..when im tryin to turn it on nothings happen and cant acces to web browsing..nothing works...i have flahed 4 roms till now and all the rom had the same problem...i ve flashed miris rom NRG rom Dutty rom and maryone....i dont know what to do....till before a week worked like a charm...but now it is still dead....
If your wi-fi was working and then on the same rom has suddenly stopped working that probably sounds like a hardware issue. You may need to flash back to rom and return the device for a service.
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
edangel said:
are you serious??cause in my country i leave in greece salonica..and the htc center is in athens and must send the device there and they told me to wait about one month or two to get it back....no way...!!!!but it is very strange...when i had miris rom it worked like a charm..after trying to flash a new rom to nrg then wifi stopped workin...tryed to flash another rom like duttys and maryone and still the same....why am i so unlucky???is there any solution???maybe is that any problem with rom?or misiing some file?
anyway thanks for reply....have a nice and a happy new year...god bless you!!
pm...sorry for my english...
Click to expand...
Click to collapse
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
ClydeB1 said:
You can always try going back to the miri rom you were using, or to the original rom that was on the phone. If wi-fi still does not work then it sounds like it is a hardware issue and there is no other way around it that I can see but to take it in for a service, unless you think you can replace the part yourself. Is there no cell phone repair services in your location, although you may need to pay to have it repaired then as it will not be under HTC warranty then if you are prepared to take that chance. Sometimes these parts just break, it doesn't happen all the time, but hey even multi-million $ F1 cars break down.
Click to expand...
Click to collapse
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
edangel said:
SO...FOR MANY HOURS TO FIND SOMETHING I MADE IT...THE SOLUTION IS UNDER START SETTINGS CONNECTION ADVANCED NETWORK AND THEN I JUST ENABLE FROM HSDPA/HSUPA TO ONLY HSDPA AND NOW ITS WORKING...
AS I THOUGHT THIS SETTINGS DEPENDS OF WHAT MODEM ROUTER YOU HAVE...JUST WORKING FINE NOW.....
SO EVEN MULTI MILLION F1 CAN BE FIXED UP......if you are rich and got the money...hahahaha
SO THANKS ANYWAY!!!!!!!!I AM GLAD FOR TRYING TO HELP ME.....
Click to expand...
Click to collapse
Hey, I'm glad you got it sorted. I'll remember to add that additional check to my little arsenal of things for troubleshooting. Thanks for the feedback.
Hi
just after installing windows live messenger italian (0410 on the .cab) i got some annoying keyboard problems.
When i press g it make gv
when i press . it make m.
and so other.
i tried to configure my registry back to my code (italian -> 0410 hex) in every way. no way to reset it.
I also used shap's advanced config and selected it to italian. no improvement. i tried some cab fix(at&tilt kayb fix, italian keyboard fix), same either. i'm going mad.
any suggestion?
trying to revert to stock rom, but unsuccesful :-(
gtazok said:
trying to revert to stock rom, but unsuccesful :-(
Click to expand...
Click to collapse
Do you mean after flashing the rom the keyboard is still screwed up, or do you mean flashing the rom was unsuccessful?
Did you try uninstalling live 1st?
stuntdouble said:
Do you mean after flashing the rom the keyboard is still screwed up, or do you mean flashing the rom was unsuccessful?
Did you try uninstalling live 1st?
Click to expand...
Click to collapse
i tryied everything:
first uninstall live messenger: no improvement
second, edit the registry, making all the thing i found in the forum: no improvement
third, revert to other 6.5 rom : no improvement
4: revert to 6.1 wwe rom: no improvement
5: revert to 6.1 stock italian rom: no improvement
i'm just going mad: the registry, when i hard reset, or install a BRAND NEW ROM do not delete itself? goin mad.
it's about 10 hours i try to configure what's the problem. I really goin mad because all the things are configured well...
Just for update: there is the situation on my keyb
qwertyuiop works well
asdf also
g make "gv"
hjkl works well
canc work but insert after the canc a return
caps lock works and stay capped on led (on/off)
z works
x works but also do "ok"
c works
v make "gv"
b make "b and space"
n works
m make "m and ."
pgup and return works
fn make "; and shut off the status led"
the windows symbol also do that
ok make "x and ok"
tab make c
space make "b and space"
. make "m."
the arrows works
It's unusable, i hope someone will suggest something!
Well as you have changed roms several times, it's going to be a hardware problem.
If its the physical slide out keyboard then it sounds like something is causing improper keypresses, maybe caused by water damage or some other liquid, so try opening up the device and cleaning the keyboard out thoroughly.
the phone is brand new, just 3 days of life... never got water or something else.
It's still covered by warranty, but i will prefer if is possible to do something via software...sure if is an hw problem no way..
i will revert to stock rom (is a v1615 vodafone) but i lack information on stock radio rom (italian version) :-(
keyboard fix
i noticed in your original post that you mentioned doing the AT&T Tilt keyboard fix .... are you really using a Tilt, or a "Kaiser"? There is a different fix for the "Kaiser" keyboard.
(I just flashed this weekend and incorrectly applied the Kaiser Keyboard fix and wondered why my Tilt keyboard was still typing the wrong values)
bbaydiver said:
i noticed in your original post that you mentioned doing the AT&T Tilt keyboard fix .... are you really using a Tilt, or a "Kaiser"? There is a different fix for the "Kaiser" keyboard.
(I just flashed this weekend and incorrectly applied the Kaiser Keyboard fix and wondered why my Tilt keyboard was still typing the wrong values)
Click to expand...
Click to collapse
i tryied all 2...no gain.. thanks however for interesting
gtazok said:
the phone is brand new, just 3 days of life... never got water or something else.
It's still covered by warranty, but i will prefer if is possible to do something via software...sure if is an hw problem no way..
i will revert to stock rom (is a v1615 vodafone) but i lack information on stock radio rom (italian version) :-(
Click to expand...
Click to collapse
A brand new kaiser?? Do they even still make this phone? You sure it's of the kaiser family? What is your phone?
it's new because it's a return of an rma.
every piece is "new", but ,what a shame, the keyb must not.
i was wondering how to reinstall the stock spl and lock the cid... i can also buy a new keyboard, but i will lose warranty...
however, yesterday, i messed around with settings, and in some manner, restored all the keyb functionality...but i not get all the special characters like umlaut chars..so i continue to mess around and the keyb stop working...so i thinked on a sw problem, but i can't figure how to repair it...
gtazok said:
it's new because it's a return of an rma.
every piece is "new", but ,what a shame, the keyb must not.
i was wondering how to reinstall the stock spl and lock the cid... i can also buy a new keyboard, but i will lose warranty...
however, yesterday, i messed around with settings, and in some manner, restored all the keyb functionality...but i not get all the special characters like umlaut chars..so i continue to mess around and the keyb stop working...so i thinked on a sw problem, but i can't figure how to repair it...
Click to expand...
Click to collapse
In my opinion you should go back to your stock rom, leaving your phone "as is" and go for the warranty. Since the problem can be the keyboard hardware.
Messing with it and not knowing what are you doing could end up with a "no" warranty coverage and a useless phone for the momment causing you first ;a headache and second; a couple of $$ for getting a new keyboard. If you send it and you get warranty coverage you can end up with a new kaiser, tilt or whatever phone you have and no headache at all for spending a lot of hours messing with the registry
Cheers and good luck
gmaniac2008 said:
In my opinion you should go back to your stock rom, leaving your phone "as is" and go for the warranty. Since the problem can be the keyboard hardware.
Messing with it and not knowing what are you doing could end up with a "no" warranty coverage and a useless phone for the momment causing you first ;a headache and second; a couple of $$ for getting a new keyboard. If you send it and you get warranty coverage you can end up with a new kaiser, tilt or whatever phone you have and no headache at all for spending a lot of hours messing with the registry
Cheers and good luck
Click to expand...
Click to collapse
thanks, but i installed spl and cid unlocked it...i cannot know if i can get warranty..i reinstalled stock wm6 rom(i think it was shipped with it) but reinstalling standard spl and locking cid is an hard matter for me i think...
do you think the warranty will cover it?
gtazok said:
thanks, but i installed spl and cid unlocked it...i cannot know if i can get warranty..i reinstalled stock wm6 rom(i think it was shipped with it) but reinstalling standard spl and locking cid is an hard matter for me i think...
do you think the warranty will cover it?
Click to expand...
Click to collapse
If you want to be sure you get your warranty then yes you want to revert to stock ROM and SPL
Reverting back to the AT&T or HTC ROM and SPL for Warranty or return
stylez said:
If you want to be sure you get your warranty then yes you want to revert to stock ROM and SPL
Reverting back to the AT&T or HTC ROM and SPL for Warranty or return
Click to expand...
Click to collapse
i followed the guide, but i cannot figure how to get the 01_spl.nb file
do you think the assistance will overlook it? i reinstalled wm6 stock rom (mid 2007)...
gtazok said:
it's new because it's a return of an rma.
every piece is "new", but ,what a shame, the keyb must not.
i was wondering how to reinstall the stock spl and lock the cid... i can also buy a new keyboard, but i will lose warranty...
however, yesterday, i messed around with settings, and in some manner, restored all the keyb functionality...but i not get all the special characters like umlaut chars..so i continue to mess around and the keyb stop working...so i thinked on a sw problem, but i can't figure how to repair it...
Click to expand...
Click to collapse
If it's a replacement phone then most likely it will be a refurbished device, and not actually "new", that you have there. Perhaps it was sent back for the exact same reasons you are stating now. It might be worthwhile getting in contact with the supplier and finding out what was wrong with it in the first place.
stuntdouble said:
If it's a replacement phone then most likely it will be a refurbished device, and not actually "new", that you have there. Perhaps it was sent back for the exact same reasons you are stating now. It might be worthwhile getting in contact with the supplier and finding out what was wrong with it in the first place.
Click to expand...
Click to collapse
the phone is another phone at all: the imei number is different from the number on the box... ;-) it was completely exchanged, maybe with other refurbished pieces but it's "new"
however, i cannot figure how i can relock the cid..any advice?
gtazok said:
i followed the guide, but i cannot figure how to get the 01_spl.nb file
do you think the assistance will overlook it? i reinstalled wm6 stock rom (mid 2007)...
Click to expand...
Click to collapse
Did you followed these steps? There are clear as water....
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
6. You should now have several .nb files in that directory, the one we're interested in is the 01_SPL.nb.
7. Now you have to create an NBH file with just the SPL, to do that download htcrt (HTC Rom Tool).
gmaniac2008 said:
Did you followed these steps? There are clear as water....
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
6. You should now have several .nb files in that directory, the one we're interested in is the 01_SPL.nb.
7. Now you have to create an NBH file with just the SPL, to do that download htcrt (HTC Rom Tool).
Click to expand...
Click to collapse
i cannot get 01_spl.nb, only 00_OS.nb
:-(
so i can't continue...