hey guys im new to this, i use the jumpspl to get the tri-color screen and usb, i unplug and plug in, when i run the RUU program, the error 240 pops out. can anyone tell me wat exactly i need to do. im using xp w/ sp2. thanks
if you have a firewall running: disable and try again.
if this does not help or is not the case: try again as admin-user
if this does not help: copy the files to a different dir and try again.
if this does not help: ask again
I've read some AV software such as McAfee, also cause problems, try disabling that also if the above does not work.
Dave
Related
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
i have been looking around the wiki and i have found no solution to this. My activesync does not work and i have been installing all my applications and programs by using my memory card. I read that in order to install hardspl u need to use activesync. Is there a way to get around this by using a cab file from the memory card?
Do you mean ativsync on your phone or on your PC. If PC what OS are you using. Need a bit more info to help
im runin on xp but im not tryin to fix my activesync. ive been tryin to get it runnin for the past two months trying every possible solution. but now im just wonderin if its possible to instal hardspl by using the card
fraid its not. What actually happens when you try and connect activsync. You are using version 4.5 yeah? It could be something as simple as an unchecked option but I need as much info as you can give me on the problem buddy. Go for gold and spam if you need to
u can contact pof but as far as my knowledge goes that can't be done.
um whenever i try to install activesync it just stops at 99 percent and it says that there was an error and activesync could not be installed. ive tried the installer from the website and not from the cd too. it was the latest version and everything. it just gives me the same error.
Hello!
Please I need help, i want to send my Xperia back for warranty reasons, but i can not manage to get the Stock Spl back on my Phone.
I have done the same as in the Video turturals from BioVolt
(here:
HTML:
http://forum.xda-developers.com/showthread.php?t=497511
)
I am using My Brothers Laptop, which runs on Windows Vista, because I have a Macbook.
So when I do the Steps on the HardSPL programm and finally there comes the Process bar on the Screen of the Laptop. then my X1 turns off and there comes the green-red-....-Screen, which is normal according to the video turtural. Then the phone goes to grey/white screen and says Loading....
Finally the HardSPL programm pops up an error Page where it says that it cannot connect to the PDA Phone. The Phone keeps showing the loading screen and never stops. So i removed the Battery.
I have the tmobile R1 DE ROM currently on it Because it was the Stock Rom.
Please can anybody tell me What is the Problem and how to Solve it?
Is it maybe because I am trying it with Vista and not with XP?
If yes can anybody tell me how to do it with Vista??
Thanks
lernst_07 said:
Hello!
Please I need help, i want to send my Xperia back for warranty reasons, but i can not manage to get the Stock Spl back on my Phone.
I have done the same as in the Video turturals from BioVolt
(here:
HTML:
http://forum.xda-developers.com/showthread.php?t=497511
)
I am using My Brothers Laptop, which runs on Windows Vista, because I have a Macbook.
So when I do the Steps on the HardSPL programm and finally there comes the Process bar on the Screen of the Laptop. then my X1 turns off and there comes the green-red-....-Screen, which is normal according to the video turtural. Then the phone goes to grey/white screen and says Loading....
Finally the HardSPL programm pops up an error Page where it says that it cannot connect to the PDA Phone. The Phone keeps showing the loading screen and never stops. So i removed the Battery.
I have the tmobile R1 DE ROM currently on it Because it was the Stock Rom.
Please can anybody tell me What is the Problem and how to Solve it?
Is it maybe because I am trying it with Vista and not with XP?
If yes can anybody tell me how to do it with Vista??
Thanks
Click to expand...
Click to collapse
vista is not % 100 compatible with x1.so i ll recommend you to use xp.you ll be allright.because i did in xp without problem.in the vista or mac you can install wmware and you can get virtual xp if you want.you can google for more info about wmware.good luck mate.
I've done it with vista ok:
Tips: Disconnect from internet (Shut down wifi/lan)
Turn of Windows firewall/standalone firewall
Turn off anti-virus software
remove SD card
Try to remove hard spl again
Once finished re-enable all firewall/virus stuff before you go back on the internet
Hi guys, I am trying to return my X1 to the stockSPL for warranty reasons - Whenever you slide open the keyboard, the screen cuts out
I am following the instructions to (what i think is) the letter, but I keep getting error 260.
I plug the phone in, make sure activesync connection is active, run hardspl, replace ruu_signed wth the stock spl, and continue as normal - hardspl says it is going to install 0.72 stock spl. so i continue, and i get the prompt on the phone to run the program, the phone reboots,and after about a minute i get error 260 on from hardspl, and the phone still says loading... in blue text on a gray background.
Any ideas?
thanks!
Mods, please lock and/or delete - I tried the process on XP instead of Windows 7 64bit, and it worked fine.
Hi!
I have exactly the same problem, even if I use Windows XP.
Any ideas?
Edit: My fault, forgot to remove the *.nbh from the SD-Card :|
will close the thread on OP request as the issue(s) is(are) solved
DK