Hi guys, I am trying to return my X1 to the stockSPL for warranty reasons - Whenever you slide open the keyboard, the screen cuts out
I am following the instructions to (what i think is) the letter, but I keep getting error 260.
I plug the phone in, make sure activesync connection is active, run hardspl, replace ruu_signed wth the stock spl, and continue as normal - hardspl says it is going to install 0.72 stock spl. so i continue, and i get the prompt on the phone to run the program, the phone reboots,and after about a minute i get error 260 on from hardspl, and the phone still says loading... in blue text on a gray background.
Any ideas?
thanks!
Mods, please lock and/or delete - I tried the process on XP instead of Windows 7 64bit, and it worked fine.
Hi!
I have exactly the same problem, even if I use Windows XP.
Any ideas?
Edit: My fault, forgot to remove the *.nbh from the SD-Card :|
will close the thread on OP request as the issue(s) is(are) solved
DK
Related
Hello!
Please I need help, i want to send my Xperia back for warranty reasons, but i can not manage to get the Stock Spl back on my Phone.
I have done the same as in the Video turturals from BioVolt
(here:
HTML:
http://forum.xda-developers.com/showthread.php?t=497511
)
I am using My Brothers Laptop, which runs on Windows Vista, because I have a Macbook.
So when I do the Steps on the HardSPL programm and finally there comes the Process bar on the Screen of the Laptop. then my X1 turns off and there comes the green-red-....-Screen, which is normal according to the video turtural. Then the phone goes to grey/white screen and says Loading....
Finally the HardSPL programm pops up an error Page where it says that it cannot connect to the PDA Phone. The Phone keeps showing the loading screen and never stops. So i removed the Battery.
I have the tmobile R1 DE ROM currently on it Because it was the Stock Rom.
Please can anybody tell me What is the Problem and how to Solve it?
Is it maybe because I am trying it with Vista and not with XP?
If yes can anybody tell me how to do it with Vista??
Thanks
lernst_07 said:
Hello!
Please I need help, i want to send my Xperia back for warranty reasons, but i can not manage to get the Stock Spl back on my Phone.
I have done the same as in the Video turturals from BioVolt
(here:
HTML:
http://forum.xda-developers.com/showthread.php?t=497511
)
I am using My Brothers Laptop, which runs on Windows Vista, because I have a Macbook.
So when I do the Steps on the HardSPL programm and finally there comes the Process bar on the Screen of the Laptop. then my X1 turns off and there comes the green-red-....-Screen, which is normal according to the video turtural. Then the phone goes to grey/white screen and says Loading....
Finally the HardSPL programm pops up an error Page where it says that it cannot connect to the PDA Phone. The Phone keeps showing the loading screen and never stops. So i removed the Battery.
I have the tmobile R1 DE ROM currently on it Because it was the Stock Rom.
Please can anybody tell me What is the Problem and how to Solve it?
Is it maybe because I am trying it with Vista and not with XP?
If yes can anybody tell me how to do it with Vista??
Thanks
Click to expand...
Click to collapse
vista is not % 100 compatible with x1.so i ll recommend you to use xp.you ll be allright.because i did in xp without problem.in the vista or mac you can install wmware and you can get virtual xp if you want.you can google for more info about wmware.good luck mate.
I've done it with vista ok:
Tips: Disconnect from internet (Shut down wifi/lan)
Turn of Windows firewall/standalone firewall
Turn off anti-virus software
remove SD card
Try to remove hard spl again
Once finished re-enable all firewall/virus stuff before you go back on the internet
Hey everyone,
recently the screen of my HTC Diamond died. I have since reflashed to the original ROM and am currently attempting to reflash to the original SPL. However, when I load the RUU with the correct .NBH I want to flash to, the progress bar stays at 0%. After this, it gives me an error 202 meaning the USB cannot connect to the phone. However, ActiveSync is connected, and MyMobiler is trying to find my phone all the time, yet not finding it. Any help?
Doh the tag lifts. Please delete
Have you tried putting the SSPL-Manual.exe file in \Windows\Startup of your device so it will be launched at startup? Maybe this will set up the device in mode that RUU accepts.
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Read the dummies guide http://forum.xda-developers.com/showthread.php?t=505377
Post anything further in that thread, no need to create new threads.
haqx said:
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Click to expand...
Click to collapse
connect ur phone in active sync mode with ur pc.
then run the HSPL olines wrapper.
ull enter a tricoloured screen which will say 1.56.OLINEX.
disconnect and reconnect ur USB cable.
Run the EXE in the downloaded ROM.
ull be ready with the new rom..
this is assuming u have Win XP. for other OS u need to dnload drivers from the thread mentioned in the above post.
Generally speaking if you are experiencing discolourization it is because your SPL is incorrect.
Check your SPL in bootloader. Then follow this guide. Any future queries regarding flashing should be posted in that thread and myself or others will help you. If no one responds PM me and I'll respond next time I'm online.
Thread closed
Ta
Rick
I have been trying for almost 2 days straight to flash a new HardSPL then ROM to my Touch Diamond. I have done everything I can possibly think of but nothing works. I think the problem may be that I am using VMWare Fusion (on a MacBook Pro) running Windows 7. I can establish a connection with WMDevice Center perfectly fine, the RUU puts my Diamond into BootLoader and it says USB in the white area. However, after this step the status bar shows up on the computer for about a minute then I get error 26x (260, 266, 264....) cannot connect to device. I don't know how to work around this. I would just boot from the Internal Storage but I need to be able to flash a HardSPL before I can do this. I somehow was able to flash a new SoftSPL (I'm running SPL-0.64.000 right now). If anyone has any ideas about what I can do please let me know. I've searched the forum, done hard resets, tried JumpSPL v1, tried to boot a ROM from Internal (can't without updated HSPL), everything. I'm out of ideas.....
Im having the same problem i almost slammed mines. At first the activesync use to come out now it doesnt even do that some choose what to open with box comes out. This phone does things random i have no idea why. Everytime it connects i press the update to install the new windows 6.5 on it and the the sound of it disconnecting shows up then it sounds again and then the screen says usb and then on my computer it says theres no htc connected so i wait to see and i get a error after 3minutes of waiting then i got to reset. Its getting me real frustraded.
Dear all,
i am having problem with fist time flash.
Thats what i do:
usb sync the device with vista (wmdc upadated)
run on pc Rhodium-HardSPL_V2_00R3 in automatic mode - nothing happen
run on pc Rhodium-HardSPL_V2_00R3 in manual mode - the device restarts and after three color screen (bootmode) goes to grey screen with with bar and stop at 0% same on the pc after a while on pc i got error 262.
I have tried all the suggestion exsplaned on Hard spl forums
but i am still stuck on it.
Please can you help me
On boot screen i see Rhod10032M spl-0.87.0000
Thanks in advance
same here...
I'm having the same issue. Trying to change the HSPL, get to that gray screen and it sits on 0%, nothing happens. I have an HTC tilt 2 with At&t
Also, not having any luck with the SSPL Manual instal on the device. I copy it over to the device, attempt to run it and the whole thing freezes.
same here, conencted, synced, and tried running the hspl file, get an error, d/led enablerapinew.cab, cant install it, winrar opens it up. havent tried manual mode yet, and i dont plan on it much yet.
Looks like you are having problems.....I would hard Reset it, then go here, http://rhodium.htc-unlocks.com/
Takes you step by step and if you get into a jam, he will help you out.
http://forum.xda-developers.com/showpost.php?p=5084595&postcount=1132
This has been the bible to flashing hardspl. Be sure to follow all the steps provided.
Which roms, radios are currently installed on the devices? Some additional info on the devices might be useful to aide in troubleshooting.
If all else fails do as Pumpiron has suggested.
Please post in the existing thread instead of creating a new one.
Dave