Database Develop

Big Problem?

I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.

Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.

Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)

That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.

Im not a expert but is vista the problem??

Most likely.

Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated

mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.

thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie

mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....

Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??

Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try

diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!

hard spl 1.30 flash problem

Hi,
i have a problem, everytime i try to flash, i get a question on my phone"do you want to allow unrecognized programms to...." if i press yes the tri-color display appears, but the programm on my Laptop doesnt progress (stand at 0%)and there isnt any progressbar on the trinity , i can just see the tri-color display, after about 30 sec i get a notification on my laptop that the connection is lost?!
what do i wrong or what can i do bether ?

Run the app your running twice.
First time it triggers the tri-color screen and failes.
Next time it patches the device.

should i run it again when im allready in the tri coulor screen ?
i habe tried im think but than it cant even connect to my trinity ?
could vista be a problem ?
what about this cid unlock thing ? is this nececcary for a vpa compact gps ?

Hi,
i solved the Problem, so i just can report that all these Programs like, rom update, radio update ... dont work with vista (on my laptop )
but i took my other laptop with win xp and everything worked fine, know i have the Lalle win 6.1 rom an my trinity everything works fine
the trinityguides faq is the best thing i know !

please help downgrade wizard g3 wm6.1 tnt romto wm5

i have searched for a long time and cant find any answers i have a tmobile mda ive tried running the tmobile rom and it didnt work gave me an error any advice please help me i wan wm5 again

Download Official T_mobile wm5 Rom from this link,bet the phone in Bootloaders (RGB screen) and flash to recover back to its default status,then read carefully this guide fron the below mentioned link and do the unlocking and upgrading.
T_Mobile Rom:-
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
Unlocking Guide :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

thats the prob when i do iit it takes me to the rgb screen and the comp says error any info for that

Exactly what error it displays,it must with an error No. and some explanation about it,can you recall it correctly.Does it display Communication error ?

pmed error 260 communication

Ok,I hope you are doing all this on a WinXP machine,if its a vista,it won't work,WinXP is recommended.Now,before start to flash,close/disable any Anti virus and firewall running on the pc,and also try to close as many applications running on the desktop or background through Task manager,don't surf the net during flash or do any Office work.
Close/disable Activesync,coz its not needed while flashing,end the process 'WCESCOMM.EXE' in the Task Manager,delete any Partnership with Activesync.
To check the connectivity problem,get the phone into Bootloaders (RGB) and hook up the phone with pc via usb cable and watch small usb appear at the bottom of the Bootloader screen,if its there,its establishing connectivity,than its good to go and run the flash,but if its not there,then its a connection problem.It may be the usb cable or mini usb port of the phone is faulty,check this out and do the needful.
Many communications errors are also due to dead or discharged battery,it doesn't have enough juice to complete the flash,hence,results in comm error,always start to flash with a fully charged battery.

le problem was the laptop i used a different one and its almost done i got another ? if i changed the radio am i gonna have to get the original tmobile radio too or does it change with the downgrade

Original ROMS
lorijuan1024 said:
le problem was the laptop i used a different one and its almost done i got another ? if i changed the radio am i gonna have to get the original tmobile radio too or does it change with the downgrade
Click to expand...
Click to collapse
The Original ROMS got his Radio ROM included. in fact... Stck ROMS got...
IPL and SPL
Extended ROM
Operative System
Radio Version

Can this be done if I have Vista?
I know someone mentioned installing a rom won't work with Vista, but I was hoping maybe it was just a personal preference. I have two pcs that both run Vista and Linux. My problem is, the wm6 rom (faria crossbow) doesn't work by default and I have a cracked screen so when I try to set it up I can do every step except setting the proxy port #s because when I highlight one there's no way to tap on it, and pressing or holding the select button (the button in the middle of the 4 way joypad) doesn't allow you to edit the values or pop up a context menu. I was hoping to get my $5.99 internet or at least my email and mms working but I got layed off and the holidays are coming so I prob won't have the extra (I know its not much, but I have no job) $30 to buy a new screen until sometime in the new year.

Why not downgrade to the Button ROM, and then upgrade to WM5 afterward?
Chuck

Diamond stoods at bootloader screen

After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.

betacheer said:
After I get out my diamond from my pc and than turned off it cannot start, it stoods on screen when it shows me version of my radio and ROM. I know that I have to do hard-reset but i dont want to, because i were so dumb that I dont backed up my mdata and programs which Ihave installed in Memory. Is there any chance to turn it on without the hard-reset???
Thx in advance.
Click to expand...
Click to collapse
do you mean bootloader (Tri-Coloured Sceen) Or the splash screen (Black Screen with touch diamond on it)?
I suggest you do a hard reset, and check this thread on how to easly back up ur programs, settings and manila config for future use using SASHIMI
http://forum.xda-developers.com/showthread.php?t=538513

Stuck in Bootloader screen
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth

KenOslo said:
Whlie trying to upgrade the ROM on my Touch Diamond something happend so i got an error and the upgrade stopped. Now i cant continue the upgrade becouse my pc wont recognize the phone when i connect it with the usb-cabel. When i try to run the upgrade again i just get an error saying that there is something wrong with the connection.
I have tried hard reset but nothing works.
Hope someone can help me with this problem.
Thanks
/Kenneth
Click to expand...
Click to collapse
i think I am in same situation. phone is bricked :/

I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things

Dom1n8tr1x said:
I dont think your phone is bricked, put your phone into bootloaded mode, connect phone to pc and flash the nbh file using CustomRUU. That should fix things
Click to expand...
Click to collapse
each bootloader i have tried using the different hard spl version gets as far as the progress bar but fails at 0% with 262 connection error. tried about 6 different hard spl, signed unsigned olinex, customRUU. each of them all fail at 0% of progress bar.
will try it again today.
sorry betacheer for the hijack, but hope this helps you out in some way too.

Having issues returning to StockSPL

Hi guys, I am trying to return my X1 to the stockSPL for warranty reasons - Whenever you slide open the keyboard, the screen cuts out
I am following the instructions to (what i think is) the letter, but I keep getting error 260.
I plug the phone in, make sure activesync connection is active, run hardspl, replace ruu_signed wth the stock spl, and continue as normal - hardspl says it is going to install 0.72 stock spl. so i continue, and i get the prompt on the phone to run the program, the phone reboots,and after about a minute i get error 260 on from hardspl, and the phone still says loading... in blue text on a gray background.
Any ideas?
thanks!

Mods, please lock and/or delete - I tried the process on XP instead of Windows 7 64bit, and it worked fine.

Hi!
I have exactly the same problem, even if I use Windows XP.
Any ideas?
Edit: My fault, forgot to remove the *.nbh from the SD-Card :|

will close the thread on OP request as the issue(s) is(are) solved
DK