More Problems :( - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Ok here we go.
I sat and read guides for G4 wizards for 3 days. i then decided on a rom (AMP) and got the needed files to do my unit.
I decided to go for the HardSPL route as i thought i could try various roms without having to mess about between each one.
I tried flashing the AMP rom and it ran through fine, rebooted phone and i get WM5 again. So i try removing HardSPL and using SoftSPL. Removed it fine, tried softspl, same thing. Ran through the upgrade, got to 100%, rebooted phone, WM5 again.
So i change the rom, i try TNT rom, exactly the same.
I finally think its time to try the Locked CID method. I reflashed the phone using this method, and guess what, i get the WM6.1 rom, but its troublesome, doesnt always start up, after about 5 seconds it drops the provider operator logo and replaces it with No Sim. But i still have signal. My wireless lan wont connect (although i think thats something to do with WPA-PSK. I also notice on bootup that the IPL/SPL/GSM/OS version numbers come up in the top left of the screen but the GSM one not always showing, just a blank line.
I decided to reflash the standard O2 rom to the phone and go back to the start. Flashed the O2 rom fine and i am now back to WM5 but i think i broke something. Using WST i extracted this info.
Wizard Service Tool v4.2.2
10/04/08 22:52:56
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: xxxxxxxxxxxxxxxxxxxxxxxxxx ( I have edited this)
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.21
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.21.4.101
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4ea0afda - 9.99M (0x9fd800)
6ea9f13a - 43.24M (0x2b3e000)
afb25f96 - 50.95M (0x32f4000)
afb25f42 - 2.94M (0x2f0000)
6fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000000c2a02011723126f140306b7
Key Index: 80
All Done.
Decrypted stored sum: E40293D6505B6326
Decrypted calcd sum: 26132272818A7D5A
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
I just put HardSPL back onto the device just so i could try again, but i need to know how to fix this CID problem i have.
Can anyone help me through what i need to do?
Thanks in advance

You are unlucky that have a CID with index 80, which recovery CID block is not provided due to some sort of problems.
The recovery thread is at http://forum.xda-developers.com/showthread.php?t=307558 .
I think you should contact mestrini to get help on that.

The CID is not corrupted. It's a bug in the algorithm that can't calculate CID with key index 80. It's on my TO DO list. sorry
The problem must be something else.

i have left you a few messages one containing my CID block. But i did try flashing that once, dont know if it changed anything. The IMEI is good, phone was bought from new by myself.

Related

NBD Help

ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Navyaz05 said:
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Click to expand...
Click to collapse
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck
zabardast_1 said:
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck[/QUOTEA
Ok so I'm downloading NBD V9.2. Now after I flash back to 2.26, then flash the NBD V9.2, am i still going to have the Tmobile look? Just for some reason that really bugs me.
Click to expand...
Click to collapse
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Navyaz05 said:
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Click to expand...
Click to collapse
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Navyaz05 said:
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Click to expand...
Click to collapse
ok
ERROR [208] : FILE OPEN
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
as t-mobile 2.26 flashed and loaded good,than there's no problem with your bootloader,Ok,Now do this,remove your phone from the usb cable(disconnect it) and do a Hard reset of your phone by doing this :-
1. Press and hold the comm manager button and voice command button on the device together with one hand
2.Keep the two buttons pressed,and at the same time,with other hand,use the stylus to lightly press and hold the RESET button
the device will reboot and switch back on.
then delete active sync,reboot your PC,Run disk Clean wizard on Drive C:\ ,check all options in Disk Clean options,specially Temporary internet files and perform disk cleanup,after that delete all cookies in Internet options.
than download the latest version of Active sync ver 4.5 and install.
after this go into bootloader mode in your phone and connect to PC,but don't establish connection with Active sync,cancell the connection when it asks
when you connect witusb you'll see small usb showing at the bottom of bootloader screen (tri color screen) if it's there then open the rom file and try to flash,hope it'll be ok.
just post your present IPL/SPL...? it appears in red color when you switch on the phone and on the boot screen at the top.whatever the ipl/spl..? is there at the moment just post it,ok
I still believe the error 208 is due to some missing files,may be the NBD rom is getting some corruption
anyway you can also download official rom from the official site of your carrier ( the rom which came prinstalled when you bought the phone)
or download this rom and see if it flashes:-
http://forum.xda-developers.com/showthread.php?t=332544
Ipl/spl: 2.26
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Navyaz05 said:
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Click to expand...
Click to collapse
hmmm !
IPL/SPL 2.25 G3 AKU2 version,
ok,now tell me,when you flashed the original rom,was it successful,did it load up ? is your phone working normal with the original rom ?
I just feel as your phone is still not CID unlock,do one more thing,download this WST tool from the link below,install and run it,then post whatever report it generates,ok
http://forum.xda-developers.com/showthread.php?t=329170
Ah 1
so,when you flashed with T-mobile 2.26 you had ipl/spl 2.26,afterwards you flashed back with your original rom,is it cingular rom ? so ipl/spl 2.25 is registered. Both of these Roms T-mobile and original(cingular or ?) which you flashed are official roms.so only official roms are flashing and not the custom builds,hmm, so custom build rom can only be flashed if device is CID unlocked.
It means may be your device is still not CID unlocked ?
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Navyaz05 said:
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Click to expand...
Click to collapse
I do believe you that you did the cid unlock but lets be sure,on the wst tool there is a button with cid action written on it,hit it and tell me the report,ok
Reading CID block...
Calculating CID block sum...
CID checksum: 16A253F6
Decrypted stored sum: 4086926D7FFBD060
Decrypted calcd sum: 4086926D7FFBD060
Key index : 52 - Block index: 196
CIDkey: …øA‰òÏ5
CID IMEI: 356378003310489
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
go to this link,there is a attached file 'RUU MUN.zip' download it,then extract,there will be four files in it,ok now open the NBD 9.2 Rom compare there you will also similar named four files,now replace these files with the files downloaded in RUU MUN.zip,after replace run the new RomUpdateutility.lets see if works,ok
http://forum.xda-developers.com/showthread.php?t=334796
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Navyaz05 said:
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Click to expand...
Click to collapse
replace the files from MUNN with the one in NBD,
just a hunch may be bootloader of your phone not accepting romupdateutility of NBD,lets replace and see,it might do the trick.
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Navyaz05 said:
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Click to expand...
Click to collapse
YES YES YES !!!
You know it got be worried,how come every things fine,your phone is CID unlocked,you can flash T-mobile and official,than why not other custom roms,so I was convinced corrupted romupdatutility,
YUP ! go ahead fire up any wm6 now,I\ll suggest go for TNT excellent ro,see my sig using the same,anyway,i'm glade for you,take care.

Which ROM for Tmobile MDA

Hello,
i have just got a MDA with some homebrew rom and would like to update it. Which one is recommended for it? I would like WM6 but am happy with WM5 too. I was reading now for a few hours but i cant really find an answer. I would rather not make one myself.
Is there some ROM which can be easily installed? The MDA shows htc as startscreen if this matters in any way. Thanks
You may want to read the guides about how to unlock first (stickies at the top) and check and confirm with the WST tool whether your MDA is already ready for flashing ..
The installation process is more related to the variant you own (G3 or G4) rather than the different, cooked ROM you may want to flash ... you find the most popular WM6 in the corresponding sub-forum...
Good luck!
after various Roms on my wizard I'm definitely happy with the one that's running ride now on my brick.....it's WM5 but with style.....
Huckleberry88 said:
You may want to read the guides about how to unlock first (stickies at the top) and check and confirm with the WST tool whether your MDA is already ready for flashing ..
The installation process is more related to the variant you own (G3 or G4) rather than the different, cooked ROM you may want to flash ... you find the most popular WM6 in the corresponding sub-forum...
Good luck!
Click to expand...
Click to collapse
Done that as you say above. What is the best, rather than the most popular WM6? Looking for speed, options and reliability. Thanks for your help above.
asctony said:
Done that as you say above. What is the best, rather than the most popular WM6? Looking for speed, options and reliability. Thanks for your help above.
Click to expand...
Click to collapse
All new wm6 roms are excellent as regards to speed,performance and stability,you cannot single out any one to be the best. It all depends upon your preferences and choice.every user here has his own opinion,likes and dislikes,the best way is to run a couple of them and check which suites you the best,At the moment TNT Professional + HTC Home,NBD 9.2 are the hottest and most favourits and considered to be very stable and super speed
I have an MDA that's unlocked and I'm running TNT 5.0 1437 touch+flo modified with 10mb page pool, the scrolling gets away from me time to time but i have fat thumbs it's fast and reliable. I'd reccomend it or any TNT 5.0rom especially.
G3 or G4 processor?
I personally run a stripped version of the WWE AKU 3.3 Tmobile Croatia ROM, with the stock Cingular extended ROM, and it works fantastic. I can send you the nk.nbf of the ROM only if you have a G4. You can then flash with shelltool or use olipro's hard SPL. (read the stickies)
If you have a G3, I'd unlock it, and then I'd flash the stock Tmobile AKU 3.3 nk.nbf to get the updated 3.08 ipl/spl. You can then flash the extended ROM from the US AKU 2.3 ROM, and you'll have a stock AKU 3.3 that has all of the connections, ringtones and screens already configured.
I'm not much on custom ROM's anymore as I use my device so much now that I can't afford to be without it. Plus, I don't have the time to cook like I used to
Thanks for the replys. I have downloaded the wst and here the information they showed
Wizard Service Tool v4.2
10/10/07 08:32:31
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI:
=> Bootloaders:
IPL: 2.26 (G3 device)
SPL: 2.26 (G3 device)
Built on Jun 7 2006 at 19:18:46
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9d4352 - 9.99M (0x9fd800)
4ea9713a - 48.23M (0x303c000)
2fb22f92 - 50.95M (0x32f4000)
8fb22f3e - 2.94M (0x2f0000)
4fb22fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000007c7002071d08020803020618
Key Index: 0
All Done.
I have no idea where to look wether the device is unlocked or not but i asume it is since the firmware on it is not the stock firmware either. Could someone PLEASE give me a link to a ROM i can use on it. Preferably WM6. Thanks again
dosada said:
Thanks for the replys. I have downloaded the wst and here the information they showed
Wizard Service Tool v4.2
10/10/07 08:32:31
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI:
=> Bootloaders:
IPL: 2.26 (G3 device)
SPL: 2.26 (G3 device)
Built on Jun 7 2006 at 19:18:46
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8e9d4352 - 9.99M (0x9fd800)
4ea9713a - 48.23M (0x303c000)
2fb22f92 - 50.95M (0x32f4000)
8fb22f3e - 2.94M (0x2f0000)
4fb22fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000007c7002071d08020803020618
Key Index: 0
All Done.
I have no idea where to look wether the device is unlocked or not but i asume it is since the firmware on it is not the stock firmware either. Could someone PLEASE give me a link to a ROM i can use on it. Preferably WM6. Thanks again
Click to expand...
Click to collapse
Hmmmm!
=> Bootloaders:
IPL: 2.26 (G3 device)
SPL: 2.26 (G3 device)
Built on Jun 7 2006 at 19:18:46
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
From this report it seems as it is already unlocked as the person from whom you have got the phone was a custom rom Faria OS: 5.1.xxx (Build 15671FARIA.3.5),well custom roms can only be flashed to a unlocked device.to be more confirmed do this:
In WST tool there's a 'CID Action' button,press it and click than whatever report it gives post it here,it'll let you if your device is locked or unlocked,but I believe it's cid unlocked,good luck
That is what i get from WST as CID
Reading CID block...
Calculating CID block sum...
CID checksum: 14C1B98F
Decrypted stored sum: E8FED00F9DC0FB39
Decrypted calcd sum: E8FED00F9DC0FB39
Key index : 0 - Block index: 231
CIDkey: MODULESN
CID IMEI:
CID: 11111111 (SuperCID)
Any particular WM6 rom recommended? I am happy to read the threads but the problem is that by the time i have read half of everything changes because of newer version and other issues....
So you are CID unlocked (SuperCID) ..
Have a look into the WM6 sub-forum for the ROMs mentioned above:
TNT
NBD
to mention 2 of them ... see also on many signature of the members here ...
dosada said:
That is what i get from WST as CID
Reading CID block...
Calculating CID block sum...
CID checksum: 14C1B98F
Decrypted stored sum: E8FED00F9DC0FB39
Decrypted calcd sum: E8FED00F9DC0FB39
Key index : 0 - Block index: 231
CIDkey: MODULESN
CID IMEI:
CID: 11111111 (SuperCID)
Any particular WM6 rom recommended? I am happy to read the threads but the problem is that by the time i have read half of everything changes because of newer version and other issues....
Click to expand...
Click to collapse
Congrats !!!
YUP ! sure it is CID unlocked already (superCID)Your one of the lucky guy,who do not require to go through the process of unlocking,
But I'll recommend first download T-Mobile 2.26 and flash so you have asolid base without any extended rom corruption and choose a custom build rom ,there are so many but the most favorite at present are TNT Professional + HTC Home and NBD 9.2,check out the links :-
http://forum.xda-developers.com/showthread.php?t=332544
http://forum.xda-developers.com/showthread.php?t=325284
Good luck and happy flashing

My RUU always gets stuck at 99% and i get an error message! Please Help!!!

hi guys, i own an i-mate K-JAM G3 Unlocked(pre-unlocked) version...
the pre-installed ROM version was the Official K-JAM_WWE_216901_216901_020710_ship ROM
when i tried to update it to TNE and XM6r5 version, RUU got stuck at 99% and i got the same error message for both the ROM versions:
when i tried to update K-JAM's ROM version to WM5r5 ROM, it gave me the following error message:
i always get problems updating any xda cooked ROMS, so i have to update it to the Old Official ROM version again...
please help guys!!!
thanks in advance!
bump!
anyone?
You may want to check if your Wizard is really unlocked:
http://forum.xda-developers.com/showthread.php?t=329170
cheer up..
use Sspl which will temporarily paste n spl..and u can upgrade!! thanks to Poff....
hi guys, i got this with the Wizard Service Tool:
Device Info:
Wizard Service Tool v4.2.1
06/01/08 13:53:54
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: ***************
=> Bootloaders:
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Built on Feb 6 2006 at 18:58:49
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.16
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.16.9.101
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
2fb7d5ea - 976.50M (0x3d07fc00)
ee9dd002 - 9.99M (0x9fd800)
cea9c13a - 48.23M (0x303c000)
cfb23f92 - 50.95M (0x32f4000)
8fb23f3e - 2.94M (0x2f0000)
6fb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000843901012808056e13010616
Key Index: 2
All Done.
CID Actions:
Reading CID block...
Calculating CID block sum...
CID checksum: 8F32A7A9
Decrypted stored sum: A2442F842B740342
Decrypted calcd sum: A2442F842B740342
Key index : 2 - Block index: 206
CIDkey: 2B__ßO©Ö
CID IMEI: ***************
CID: WIZCDL01
Phone is CID LOCKED!
When i tried to Unlock CID, it gave me this:
SPL version is 2.16.0000
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
how should i downgrade SPL?
Just follow the stickies on the top of the forum to CID unlock your G3 wizard.
Good luck!
use shelltool..
i also always got this problem, and my phone was cid unlocked..
i tried shelltool and it worked..
tshizzle said:
use shelltool..
i also always got this problem, and my phone was cid unlocked..
i tried shelltool and it worked..
Click to expand...
Click to collapse
But his phone isn't so don't advise Shelltool; it's not a good practice because Shelltool doesn't display progression and if cable is unplugged early it can leave a corrupted ROM.
@Evil Eye
Double posting isn't a good policy. Restrict yourself to one thread, please.
itold u to use Softspl..just try that ur problem will be solved...go on xda wiki..u will get it there...
malhaar said:
itold u to use Softspl..just try that ur problem will be solved...go on xda wiki..u will get it there...
Click to expand...
Click to collapse
Another unadvised advise
SSPL and HardSPL are for G4 devices only. I made the checking routine and if he tries to use it will pop-up a warning.
Use Dr. Puttingham's guide to downgrade and unlock and it will be fine.
thanks for the advise guys, i am currently following the doc's thread and downloading the button ROM
sorry!! i skipped g3...
Hi, I have the same problem you described earlier. Would it be possible for you to assist me resolve this?
Thanks bro.
kobenao said:
Hi, I have the same problem you described earlier. Would it be possible for you to assist me resolve this?
Thanks bro.
Click to expand...
Click to collapse
First always provide vital data of your phone before asking any help,it determines the DOC chip of your device,therefore post IPL/SPL of the phone.
Your phone is CID Locked,now if it's a G3 version then follow the unlocking guide by Dr.Puttingham,but if it's G4,follow the method described in 'SoftSPL or HardSPL' in G4 forum.
Cheers !
zabardast_1 said:
First always provide vital data of your phone before asking any help,it determines the DOC chip of your device,therefore post IPL/SPL of the phone.
Your phone is CID Locked,now if it's a G3 version then follow the unlocking guide by Dr.Puttingham,but if it's G4,follow the method described in 'SoftSPL or HardSPL' in G4 forum.
Cheers !
Click to expand...
Click to collapse
i second that
I had the same problem with my device. Solution = install Wizard Love Rom, then install Cert_SPCS.cab and EnableRapi.cab on your mobile. Flash with something.

I did everything rite but unable to unlock my K-jam (G3)

My k-jam info
Wizard Service Tool v4.2.2
23/03/09 10:50:42
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: XXXXXXXXXXXXXXX
=> Bootloaders:
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Built on Feb 6 2006 at 18:58:49
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.16
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.16.9.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4e9dd002 - 9.99M (0x9fd800)
2ea9c13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
4fb23f3e - 2.94M (0x2f0000)
4fb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000eb030102083b0671010a054b
Key Index: 80
All Done.
I did everything (twice) as like mention in tutorials, everything goes smooth n perfect, First i used Button Rom to downgrade the IPL to 1.xx then copy the enablerapi file to wizard n install it, Then successfully do the unlock n CID unlock by using lokiwiz, everytime wizard restart by itself, no error, then to downgrade the SPL i rerun the Button Rom but SPL ddin't change to 1.xx.
(i read somewhere on this forum tht it's not necessary to downgrade SPL, if it's not downgrading then it's ok) then i upgrade the back to IPL 2.xx n use the original rom downloaded from imateclub's ftp.
After doing all this, my wizard is (i think) still locked as i run WST to check and got this error.
Decrypted stored sum: 8609B537F7B08439
Decrypted calcd sum: 2CD7F50D1EDBF2B2
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
Then i try Xds Minis Launch rom n repeat the whole procedure but end result is same.
Can somebody please tell me what I'm doing wrong or what I'm missing...
Thanks for your time n patience of reading this.
Sorry for my English, I know it's bad.
.....................................
Update:
I tried again with Button Rom went to whole procedure n this time successfully unlock the wizard n flash it with T-mobile rom...
Then upgrade to SNN Diamond rom Wm6.1 successfully....everything went rite, wizard boot n done the customization then reboot n freeze on splash screen.....
1st i thought i kill my innocent wizard then i got this hope that by going in boot loader screen n re-flashing it back to wm5.0 may save it n tried n it's work, my wizard is alive n breathing again...
Any Idea what n where i did wrong....?
i had ur same problem , and here goes the solution , they neglect to mention one step for a mysterious reason u need to restart the phone after installing rapi and then cid unlock it . the problem is that lockiwize returns unlocking successfulness wether it did or did not unlock ur phone which keeps u dazzled
cheers
freezing on splash screen is comman , it indicats o.s corruption or start up corrupted files , also processor overload , some of the roms use omap overclocking in order to run wm 6 faster which on old and tired processors can cause a freeze on load, any way u can always retry the upgrade , maybe it was just one time glitch

My wizard os not working!!!!help me plz

I'VE GOT QTEK 9100 G4 DEVICE. I SUCCESSFULY UPGRADED IT TO WM 6.1 RUU MUN(PROVIDED BY XDA DEVELEPORS)USING HARD SPL. IT WAS WORKING PERFECT. COUPLE OF DAYS AGO I TRIED TO CHANGED IT'S SPALSH SCREEN. BUT UNFORTUNATELY, AFTER REBOOT THE BOOT SPLASH STUCK ON GREEN SCREEN SHOWING IPL.2.21 SPL 2.21 OILP, AFTER 10 MINUTES IT SHOWS WINDOWS SCREEN AND AFTER SOME TIME IT BEGENS TO INSTALL WINDOWS BUT IT IS LIKE HANGING SITUATION . I HAVE TRIED LOT OF METHODS IN RGB MODE( WST/SHELLTOOLS/ HARDSPL/MTTY) TO BRING IT BACK TO NORMAL, BUT NOT. NOW IT IS NOT TURNING ON....EVEN A SINGLE LIGHT DOES'NT BLINK. HOW EVER WHEN I PULL OUT THE BATTERY THE LCD FLASHES WHITE LIGHT FOR MICRO SECOND. I AM IN GREAT PAIN FOR MY QTEK 9100. I CONSIDOR IT AS DEAD!!!!
PLZ HELP ME.... I AM LIVING HERE IN DUBAI, THERE IS NO SUCH SERVICE CENTRE TO PROVIDE ME SOLUTION....I WILL BE GRATE FUL IF SOME ONE HELP ME BRING MY QTEK 9100 TO NORMAL.
BEFORE UPGRADING IT'S CONFIGARATIONS WAS THAT:
Wizard Service Tool v4.2.2
19/03/09 10:10:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384004295703
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
afb7d5ea - 1.87G (0x77e60200)
4e9e43ba - 9.99M (0x9fd800)
2ea9d13a - 43.24M (0x2b3e000)
8fb25f96 - 50.95M (0x32f4000)
afb25f42 - 2.94M (0x2f0000)
cfb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000003d2f0205171916cc14040617
Key Index: 0
CID:
Reading CID from file...
Calculating CID block sum...
CID checksum: AFC9749C
Decrypted stored sum: 2C8A2F04DE52357D
Decrypted calcd sum: 2C8A2F04DE52357D
Key index : 0 - Block index: 101
CIDkey: MODULESN
CID IMEI: 356384004295703
CID: WIZQTKF9
First, net etiquette. All caps is like yelling. It's rude and annoying.
Second, your phone. Some questions first:
Did you back up your PIM?
Do you have your PIM data backed up on a miniSD?
Can you live without your data, if you didn't back up your PIM?
If the answers to #1 and #2 are "Yes," you're in luck. Just do a hard reset, and then load the programs you like back to your phone, and restore your PIM data from your miniSD card. If the answers were no for the first two, and the answer to the third one is "Yes," then do the hard reset anyways.
There's only a few likely culprits here:
Your phone's memory is full because you don't clear out temp files and/or loaded too many programs/media.
Your extended ROM is corrupted from the recent flash to 6.1
You just installed something that the OS didn't like (and I mean it REALLY didn't like it...)
The phone's at its end of life.
Do this: Turn the phone off, take the battery out, and do a long ten-count before putting everything back together. DO NOT TURN IT ON. Put it on a wall charger and leave it until you get a green light. If it never turns green, you probably also have a dead (as in totally dead) battery, and may need to do the jump-start (search for it), or buy a new battery.
After you have a green light, boot into bootloader mode, and try to flash the same ROM again. Report back.

Categories

Resources