I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Hi,
Try deleting the 'Internal Storage' folder using the file explorer and soft reset. 'Internal Storage 2' should be automatically renamed to 'Internal Storage'.
Hopefully this work for you.
DT
Did that. But still can not install any CABs...
Activesync mode
Check if your diamond is not connected as disk drive (normally when you connect it to your computer you have the choice to connect using activesync or disk drive). If you did connect using disk drive mode, you will not be able to install programs correctly. This is why it creates a 'internal storage 2' folder when installing programs.
I rearly use ActiveSync to install programs. I have them mostly as a CABs. So last advice does not fix the problem. Thank you though.
tarrytownfads said:
I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Click to expand...
Click to collapse
this internal storage 2 is because of messaging (attachments of email messages that are appointed to be stored in internal storage). when u want account to store messages to the internal storage some times it doesnot work in order to get this worked just go to MESSAGING and MENU >>>> OPTIONS >>>> and here u see all accounts and just at left side u see storage and there uncheck the item that says When available use this storage card to store attachements and then RESTART and the problem should now be solved.
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
tarrytownfads said:
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
Click to expand...
Click to collapse
FIRST install the sdkCERTF.cab see the attachment see if it works !!
which softwares are u installing again if u are installing them again maybe they were not deleted completely u can use taskmanager to terminate the process of that program and then reinstall. Use the Certf cab file and install it in your device may be this will help !!
Well, the whole point of my post is that it does not allow me to install ANY CAB file. I just tried it and copied both programs to the Diamond. After clicking on SDKCert.cab I've got the "Installation of SDKCerts.cab was unsuccessful" and with the TaskMgrv3.0 the message is "The file 'TaskMgr' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
What else could be done?
"digitally signed with a trusted certificate" issue
Guys, can anyone help here??? I can not believe that no one knows how to fix this...
If I were to flash my ROM to one of the newer ones from this forum, do you think it would fix the "digitally signed with a trusted certificate" issue?
Got the same issue with rom 1.37 :/
Any ideas since then ?
bringing this back to the top. I am trying to install an autorun that is designed to run from an SD card (not sure if this makes a difference or not) and when I do it says its not a trusted certificate and won't run. Have already installed the sdkcert.cab file and it states it installed correctly, but still the problem persists.
Fixed my install problem
I used Pocket Mechanic to fix registry issues and remove all trace of the program that first failed to install. All subsequent installs work fine.
Hi,
I tried to install garmin but i receive this error;
Error: Assert failed at gfx_buf.cpp : 152 in Garmin Mobile XT with error 0.
Does someone know a solution for this problem?
Plug ur htc to PC then install Garmin xt from PC. Hope this help
I've gotten weird errors like that and it seemed to be related to having it set to GPS Intermediate Driver instead of COM4.
For me, I was able to quickly go through the menus and change it to COM4, then it wouldn't crash.
jeffreybr said:
Hi,
I tried to install garmin but i receive this error;
Error: Assert failed at gfx_buf.cpp : 152 in Garmin Mobile XT with error 0.
Does someone know a solution for this problem?
Click to expand...
Click to collapse
Delete any text message on your phone and see if that fixes it. I know it sounds totally unrelated, but this sounds like the error I used to get, and the solution was to delete your text messages.
I was getting errors with Garmin XT after I used the GPS tweak cab that is going around that addresses the GPS "lag". I changed/deleted the keys in the registry that the cab changed/added back to the factory default and I have no crashes/errors.
Sorry to resurrect this old thread but I'm having the same problem - I haven't installed any GPS fixer utilities and deleting my text messages is something that I'd rather avoid. Any other ideas? I can't even get into the application to change anything before it crashes.
Which version of Garmin did u install? And from which site?
Or just try to re-install the appliaction
"The file 'x' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found."
Pretty much any app I run which is installed on "internal storage" gives me that message. The phone was working fine till a couple of hours ago? Just tried running apps I normally run (Total Commander, GAlarm...) and started getting that message!?
I've also tried to run some cabs but I keep getting "installation unsucessful".
Any help - don't tell me I have to hard reset!?
Really need your help guys ... starting to "despair" ... anyone!?
A few months ago, I installed the CUBE. I uninstalled it a while back. Ever since then when I do a hard/soft reset, when the phone comes back online I get the following error:
"The file 'FTtouchFlo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Also, when I go to Start --> Programs...I have 3 SCLPF folders, each with Cube Settings Icon inside. There is a SCLPF settings folder as well. I can't delete them, can't find them in a search (on the phone or through active sync). The cube and TouchFlo are not in my "remove programs" settings either.
Can someone give me a clue? I want to get rid of these folders and the annoying pop up error i have been receiving upon start-up. Thanx in advance for your help!
I've got the same Problem, dosen't anyone know how we can delete this Problem?
At first Sorry for my bad english
you most likely have an entry in your startup folder for FTouchFlo:
Check here:
C:\Windows\Startup\
hi guys,
thought i would clean up my system by reinstalling windows this wkend...
been using windows7 + jerpelea with no issues thus far...
but after format/clean install i'm getting an error when building my rom under jerpelea's x1 kitchen
happens after BuildOS / and looking at the batch file its caused by G'reloc
any ideas?? as i need to get this working again
(i did play with bios settings on my motherboard but even when changing them back and reinstalling same error msg)
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
Relocating Modules, please wait...
The application has failed to start because its side-by-side configuration is in
correct. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
ERROR! (errorlevel: 14001)
Press any key to continue . . .
ryousuke said:
hi guys,
thought i would clean up my system by reinstalling windows this wkend...
been using windows7 + jerpelea with no issues thus far...
but after format/clean install i'm getting an error when building my rom under jerpelea's x1 kitchen
happens after BuildOS / and looking at the batch file its caused by G'reloc
any ideas?? as i need to get this working again
(i did play with bios settings on my motherboard but even when changing them back and reinstalling same error msg)
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
Relocating Modules, please wait...
The application has failed to start because its side-by-side configuration is in
correct. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
ERROR! (errorlevel: 14001)
Press any key to continue . . .
Click to expand...
Click to collapse
Did you try to download the kitchen again ? and tryed it with new downloads maybe something got wrong with your tools.
i never had this issue
Yeah i downloaded it again as i thought there was an issue when i copied files to and from my backup drive (maybe the hidden files didnt get copied)...
same issue...