"The file 'x' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found."
Pretty much any app I run which is installed on "internal storage" gives me that message. The phone was working fine till a couple of hours ago? Just tried running apps I normally run (Total Commander, GAlarm...) and started getting that message!?
I've also tried to run some cabs but I keep getting "installation unsucessful".
Any help - don't tell me I have to hard reset!?
Really need your help guys ... starting to "despair" ... anyone!?
Related
I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Hi,
Try deleting the 'Internal Storage' folder using the file explorer and soft reset. 'Internal Storage 2' should be automatically renamed to 'Internal Storage'.
Hopefully this work for you.
DT
Did that. But still can not install any CABs...
Activesync mode
Check if your diamond is not connected as disk drive (normally when you connect it to your computer you have the choice to connect using activesync or disk drive). If you did connect using disk drive mode, you will not be able to install programs correctly. This is why it creates a 'internal storage 2' folder when installing programs.
I rearly use ActiveSync to install programs. I have them mostly as a CABs. So last advice does not fix the problem. Thank you though.
tarrytownfads said:
I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Click to expand...
Click to collapse
this internal storage 2 is because of messaging (attachments of email messages that are appointed to be stored in internal storage). when u want account to store messages to the internal storage some times it doesnot work in order to get this worked just go to MESSAGING and MENU >>>> OPTIONS >>>> and here u see all accounts and just at left side u see storage and there uncheck the item that says When available use this storage card to store attachements and then RESTART and the problem should now be solved.
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
tarrytownfads said:
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
Click to expand...
Click to collapse
FIRST install the sdkCERTF.cab see the attachment see if it works !!
which softwares are u installing again if u are installing them again maybe they were not deleted completely u can use taskmanager to terminate the process of that program and then reinstall. Use the Certf cab file and install it in your device may be this will help !!
Well, the whole point of my post is that it does not allow me to install ANY CAB file. I just tried it and copied both programs to the Diamond. After clicking on SDKCert.cab I've got the "Installation of SDKCerts.cab was unsuccessful" and with the TaskMgrv3.0 the message is "The file 'TaskMgr' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
What else could be done?
"digitally signed with a trusted certificate" issue
Guys, can anyone help here??? I can not believe that no one knows how to fix this...
If I were to flash my ROM to one of the newer ones from this forum, do you think it would fix the "digitally signed with a trusted certificate" issue?
Got the same issue with rom 1.37 :/
Any ideas since then ?
bringing this back to the top. I am trying to install an autorun that is designed to run from an SD card (not sure if this makes a difference or not) and when I do it says its not a trusted certificate and won't run. Have already installed the sdkcert.cab file and it states it installed correctly, but still the problem persists.
Fixed my install problem
I used Pocket Mechanic to fix registry issues and remove all trace of the program that first failed to install. All subsequent installs work fine.
i keep getting the following error message when I try to run an application
"The file 'xx' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
every time i do a soft reset all my installed programs get like this, and i have to reinstall them for them to work. This only happens to the applications i've installed on my own, not the ones that come with the phone.
if there is anyone out there who has a solution, please let me know.
A few months ago, I installed the CUBE. I uninstalled it a while back. Ever since then when I do a hard/soft reset, when the phone comes back online I get the following error:
"The file 'FTtouchFlo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Also, when I go to Start --> Programs...I have 3 SCLPF folders, each with Cube Settings Icon inside. There is a SCLPF settings folder as well. I can't delete them, can't find them in a search (on the phone or through active sync). The cube and TouchFlo are not in my "remove programs" settings either.
Can someone give me a clue? I want to get rid of these folders and the annoying pop up error i have been receiving upon start-up. Thanx in advance for your help!
I've got the same Problem, dosen't anyone know how we can delete this Problem?
At first Sorry for my bad english
you most likely have an entry in your startup folder for FTouchFlo:
Check here:
C:\Windows\Startup\
Hello Every Body.
After a bad Manipulation, QuickGPS doenst want start.
she said me: "the file QuickGPS" cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
Anybody can post a Cab of gpsrapid for my touch pro please?
Because all of gpsrapid i found on the internet has the same problem.
PLEASE....
Try making a new shortcut to quick gps-you may have messed up the original one. Or, check if you've over-written any rom files related to quick gps with something that has the same name but a different function.
I try to execute them directly on the windows folder but not successfuly
I install tp2x rom...
i ask to the developer so
thanks
This is the error message in english
"the file QuickGPS" cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
You get that error when you have a bad shortcut or when there are missing (or over-written) modules. If it happened right after the flash, then there's a problem with the rom.
No
after a flash, quickgps is ok.
but after the flash, i made a update of quickgps with a cab found on xda...
i restart, and i execute directly /windows/quickgps.exe
and my phone said the error message
Well, it's pretty obvious that you over-wrotr the stock modules with new ones that don't work. Remove them w/ sk tools or total commander, or just do a hard reset and start over. Why would you want a new quick gps, anyway?
i made that because i have a problem with gps since the start...
Hi I've run Haret.exe to install gingerbread (latest install for topaz) I got it all in the bundle that was just released. I ran Haret once and Android ran just fine for a while, I tried running google maps and then it froze. I restarted the phone but Haret wont start again.
the message that shows up is"
the file 'haret' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
I re-copied the file from my laptop but it still doesn't work....
sorry I'm a bit of a noob when it comes to this stuff
Haret Doesn't Run....
OKay, so here's some more information on my situation.
I have an HTC Warhawk (technically Topaz i believe) from AT&T running WinMo 6.5
I've run Haret after extracting the bundle below to my sd card
Gingerbread Bundle (2.3.3 with Camera)
(I can't post outside links Sorry its in TheJokah's post found here:
http://forum.xda-developers.com/showthread.php?t=509493&page=603
Haret Ran and installed android successfully and after running google maps (not sure if that is actually related) it froze so I took out my battery to reset it.
I then tried to start Haret again and it won't run and gives the aforementioned message.
I've read other posts around the web including ones on PCC and tried soft Reseting it by pressing the small button under my stylus holder...
it still doesn't run and gives the same message.
plz help!
okay now i tried hard reseting and it ran again! sorry for the trouble..I fixed it myself.
how u fix it