Related
I am familiar with flashing ROMs. After flashing NBD 8.0, I managed to drop the phone to the ground just as the device was resetting. The touchscreen is cracked. I now can't get past the align screen program. Though the crack is at the bottom right of the screen, I have problems with the pointer on the top right; after some futile clicks there, at the best align screen starts from the beginning.
Obviously any number of resets doesn't help as the align screen is the first thing to come up.
Is there anything that I can do? It is not trivial for me to get the touch screen fixed in the next 10 days.
Edit: For once, I found the solution outside this forum. The solution was to somehow to get activesync work, and then use it to remove the welcome shortcut in windows\startup. This made the align screen program (and may be something else too) not appear during the initial bootup. Touchscreen is pretty much dysfunctional now; but I at least have the phone working.
kernelguy
Another alteranitve
I found this some time ago, I never used it but you may want to give it a try.
kernelguy said:
I am familiar with flashing ROMs. After flashing NBD 8.0, I managed to drop the phone to the ground just as the device was resetting. The touchscreen is cracked. I now can't get past the align screen program. Though the crack is at the bottom right of the screen, I have problems with the pointer on the top right; after some futile clicks there, at the best align screen starts from the beginning.
Obviously any number of resets doesn't help as the align screen is the first thing to come up.
Is there anything that I can do? It is not trivial for me to get the touch screen fixed in the next 10 days.
Edit: For once, I found the solution outside this forum. The solution was to somehow to get activesync work, and then use it to remove the welcome shortcut in windows\startup. This made the align screen program (and may be something else too) not appear during the initial bootup. Touchscreen is pretty much dysfunctional now; but I at least have the phone working.
kernelguy
Click to expand...
Click to collapse
I have the same problem, and i have no idea to figure it out .... maybe it is only bug in NBD v8.0 for few devices .... so we could contact autor directly this version of ROM and ask him ... because i dont know ....
Skip Align Screen
I can confirm that the program works.
BUT the touch screen becomes unusable!!!!
Mine's broken so it won't make a diff.
My touchscreen had a crack only at the bottom. After skipping the 'align screen' during initial ROM load, I lived with a non-functional touch screen for a day or two. I then remembered the post from equinoxe that had registry settings for his phone. I took those settings and updated my registry. I now have a decent touch screen - at least the top 3/4 works fine.
The key and settings are:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
I could surmise that the screen is being treated as a square of 3900 x 3900 dots. 0,0 seems to be the top, right corner.
kernelguy
kernelguy said:
My touchscreen had a crack only at the bottom. After skipping the 'align screen' during initial ROM load, I lived with a non-functional touch screen for a day or two. I then remembered the post from equinoxe that had registry settings for his phone. I took those settings and updated my registry. I now have a decent touch screen - at least the top 3/4 works fine.
The key and settings are:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
I could surmise that the screen is being treated as a square of 3900 x 3900 dots. 0,0 seems to be the top, right corner.
kernelguy
Click to expand...
Click to collapse
I asked the same question awhile back and pretty much got no useful response. It's actually easy. All you have to do is to put a file in the root of your mini-sd card named welcome.not and the system will skip the alignment stuff (and presumably all that crap with moving the appt and stuff too).
mate .... im using your advice to remove the windows shortcut on windows/startup .. but i cannot proceed ... a warning appeared after my attempt to delete the file :
-----------------------------------------------------
Error Deleting File
Cannot delete file Welcome : Access is denied .
Make sure your mobile device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type .
-----------------------------------------------------
that is the exclamation .. is this because the file is a read only ?? how can i change the file permission ??
thx b 4 mate ...
dincth13 said:
mate .... im using your advice to remove the windows shortcut on windows/startup .. but i cannot proceed ... a warning appeared after my attempt to delete the file :
-----------------------------------------------------
Error Deleting File
Cannot delete file Welcome : Access is denied .
Make sure your mobile device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type .
-----------------------------------------------------
that is the exclamation .. is this because the file is a read only ?? how can i change the file permission ??
thx b 4 mate ...
Click to expand...
Click to collapse
Same problem with me, even with the welcome.exe, so that's not gooing to cut... my next attempt is the registry tweak, i'll create the reg file and put it to SD, every time the alignment is messed up, re run the reg and soft reset
Little update
I've been toying with my k-jam trying to find a solution, i'm writing this as the process is being done.
So i installed and ran the remote remote screen alignment tool mentioned above (attached for simplicity) I only used the first option in the software (you'll see, you wouldn't need the other 2, unless you have working screen alignment)
At least, now I know that after a flash, the phone will work, the screen iffy but... we're in!
I'm trying the registry tweak now, looking for a registry editor for PPC.
OK. PHM RegEdit will do for now, installing
I'm using the regedit because i'm not sure what's the RegistryEditorVersion for WM6, hopefully PHM will lock the settings in
I've manually changed the calibrationdata numbers with great difficulty, soft reset and now the screen is beyond effed up... tapping start goes to calendar..
tapping calendar opens contacts...
Ok just for the sake of curiosity, checked regedit again to find another set of calibration numbers, re-entered the numbers from the post above. This time the numbers remained. No soft reset, just shut down the wizard and turned it back on.. i've regained much of the touch but now i believe it's the digitizer to blame.... will open up the wizard and keep u posted.
So as far as my experiences go for this, software-wise, definitely a success with the calib data given. hardware-wise to be determined..
HTH
Edit: can't attach the remote tool so here's the link
http://www.codefactory.es/descargas/family_1/product_3/MSP_RemoteAlignment.zip
Thank you !!!
thank you so much, it worked with no problem...
hehe
maybe i have a solution too
i had a broken screen too but still could enter my device by using SOTI
http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
after a while the battery drained and when i reconnected it it did a hard reset
i got stuck at the align screen too
but soti already installed on my device even it didnt setup yet
soti has this task manager and i fooled around with closing some threads, i dont know wich ones exactly
anyway i could pass the align screen that way
i have lg ks20 how to skip align screan
the welcome.not function works perfectley...
a blank note pad file saved as "welcome.not" change save as type from text document to all files, then i put it in the root of the sd card and the internel momory...
to sum up:
to skip the align screen:
create a blank file with notepad and rename it to welcome.not
place it into root folder of the internal memory of your phone and soft reset
worked like a charm on touch pro
kernelguy said:
My touchscreen had a crack only at the bottom. After skipping the 'align screen' during initial ROM load, I lived with a non-functional touch screen for a day or two. I then remembered the post from equinoxe that had registry settings for his phone. I took those settings and updated my registry. I now have a decent touch screen - at least the top 3/4 works fine.
The key and settings are:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
I could surmise that the screen is being treated as a square of 3900 x 3900 dots. 0,0 seems to be the top, right corner.
kernelguy
Click to expand...
Click to collapse
i have a problem with my wing i have a little crack... at the bottom. i skipped the screen part i red your message with the stats but i dont know how to put them onto my phone i know how to back them up but i dont know how to put the new one on.!!! please please i need help!!!!
having same problem on my titan, can someone tell how to place file and where? I know it is root but like windows folder or ? tried using ceRegEditor and could not drag the .not into the root dir there probably not the right root anyway but I am...sigh anyway I used the tool it is great and is here not here here but follow this linky http://forum.xda-developers.com/showthread.php?t=355010
Calibration data
I tried the registry value but, no success.
Could someone provide Screen calibration data from properly aligned Wizard.
it can be found here
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData" =
Thanks
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1903,1948 3181,636 3187,3240 607,3242 592,648"
A little extra info on my Cingular 8125 device with Mfrazzz's Windows Mobile 6.0 ROM.
My original problem was no touch functionality in the top 1/5 of the screen.
I did a system hard reset and was stuck in the Align loop.
I used Windows 7 Mobile Device center to access the device.
I used the SD card welcome.not to bypass the Align, but the xy of the touch point was WAY off, perhaps 20% of screen.
I tried to edit the registry using the reg editor installed in the ROM but could not navigate well enough using the D-pad keys and hardware keyboard.
I installed CeRegEditor on my Win7x64 machine, connected using W7MDC and then connected with CeRegEditor. I edited the coordinates
I installed CeRegEditor and updated the key
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
The alignment was still way off and the Screen Alignment app would still get stuck.
Then I changed the MaxError key value from 16 to 4000.
Bingo! After a reboot the next alignment was accurate and I can now use the touch screen normally.
I believe the screen calibration error was outside the maximum causing the Align loop.
Post if you find this useful.
Good luck!
HiTach said:
A little extra info on my Cingular 8125 device with Mfrazzz's Windows Mobile 6.0 ROM.
My original problem was no touch functionality in the top 1/5 of the screen.
I did a system hard reset and was stuck in the Align loop.
I used Windows 7 Mobile Device center to access the device.
I used the SD card welcome.not to bypass the Align, but the xy of the touch point was WAY off, perhaps 20% of screen.
I tried to edit the registry using the reg editor installed in the ROM but could not navigate well enough using the D-pad keys and hardware keyboard.
I installed CeRegEditor on my Win7x64 machine, connected using W7MDC and then connected with CeRegEditor. I edited the coordinates
I installed CeRegEditor and updated the key
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="1922,1957 3330,639 3317,3276 600,3230 609,677 "
The alignment was still way off and the Screen Alignment app would still get stuck.
Then I changed the MaxError key value from 16 to 4000.
Bingo! After a reboot the next alignment was accurate and I can now use the touch screen normally.
I believe the screen calibration error was outside the maximum causing the Align loop.
Post if you find this useful.
Good luck!
Click to expand...
Click to collapse
WITH REFRENC TO IMATE ULTIMATE 9502
1 i have made the registry and then posted in the root dir of hardware..
2 i installed the remote screen alignment then pressed skip...
it said "no screen allignment information can be found for your device.the screen allignment will be done mannually . the screen allignment will be done manually" would u like to skip the welcome screen anyway ?
3 now wat i gotta do ?
[/FONT]
please any one help me !
Hi,
I'm using Treo 750v for few months now, but I'm really surprised to found out that it's screen resolution have been changed! What I meant is that the screen didn't show text & pictures lines correctly anymore, for an instance: if I save a file from Word Mobile, the Save & Cancel buttons are way below from the bottom of the screen; making them not visible. And there is no scroll down panel so I can't take a look at them...
This not only affected that but also the whole system & applications! So this must the Windows Mobile 6 screen resolution registry had been changed by something. Unfortunately I never checked this every time I installed a new applications or games, so I wouldn't know which have caused the problem.
I've tried to change the settings in Windows Mobile settings option, but no success to bring it back to original again.
Anyone else have experienced the same problem too?
Is there somekind of registry tweak to correct the screen resolution in Windows Mobile 6?
Thanks in advance, I really hope someone can give an answer since this problem is causing me a real frustration because I had to hard-reset many times of my Treo 750v.
Maybe create a backup and give your Treo a hard reset. Should solve the problem. After this install your apps one by one.
When I've flashed my device I always install a few apps then I soft reset. I repeat this until I've installed all my apps. Works better for me when it comes to speed and stability of the device.
mccune,
I did backup my Treo 750v prior the hard-reset action, but when I restore it back using Spb Backup v1.6.3; the screen resolution stays the same! Seems the whole WinMob 6 registry system has been changed permanently...
I also took the steps you mentioned: soft-reset everytime I installed a new apps or games. And I've found out what has been causing the WinMob 6 screen resolution to changed: LingvoSoft's products!!!
Back then I installed LingvoSoft Talking Dictionary 2008 & Talking Phrasebook 2008, and when I contacted their support team respond is as follow: "We acknowledge the compability and stability issue with Windows Mobile platform, specially the language keyboard, we're working on the issues right now."
So I do hope this could become a good warning for those who wish to install LingvoSoft's products into their Treo 750...
But I haven't found another better ways to get back the original screen resolution, the only way is to hard-reset my Treo 750v again and again.
Thanks!
I didn't read your whole post (just too much ), but sounds like your going to have to bite the bullet and do a hard reset and perform manual install (forgo the backup restore) of your apps
tmknight,
i did that... that's the only thing i can do to bring my treo 750v back to it's original settings.
yer good to go then
start installing your apps one at a time to determine the culprit...
Does anybody know a program, or how to edit the start menu bar so that it goes down to the bottom of the screen instead of staying at the top? (Like a PC)
(P.S I don't think WisBar does it, and even if it does, it screwed my TyTN II up bad. Plz don't suggest it...)
Well, i think Wisbar Advance Desktop is the only way (correct me if i'm wrong). With WAD you can build your own desktop from scratch.
Yeah, but WAD only works on the Today Screen... i want the start menu bar (top bar) to stay at the bottom in other programs too.
Thanks anyway
I am looking for the same thing. I used Wisbar to customize the Start menu to look like WinXP. I need to get the whole bar with the Start button on the bottom of the screen and can't discover how....
May i suggest a Windows CE 2.11 Palm-Size PC in that case....
(you'll have to put up with a non-connected device with 69Mhz and 8Megs RAM in that case... )
Moaske said:
May i suggest a Windows CE 2.11 Palm-Size PC in that case....
(you'll have to put up with a non-connected device with 69Mhz and 8Megs RAM in that case... )
Click to expand...
Click to collapse
or buy a MS Smartphone. :-\
Moaske said:
May i suggest a Windows CE 2.11 Palm-Size PC in that case....
(you'll have to put up with a non-connected device with 69Mhz and 8Megs RAM in that case... )
Click to expand...
Click to collapse
Sorry mate, we're only looking for applications for WM5 and WM6 Professional that can move the start menu to the bottom.
Also, i saw a bootloader, called "Harret" (i think) and it moves the taskbar to the bottom. I dunno how they did that, but i'm sure other people here want to know how. Any other ideas? I'd love to have my phone actually looking like a WINDOWS mobile phone.
your right about haret pulling down the start menu to the bottom. i also want to know how they have done that
#Bump#
Could any kind of Registry Tweak do it?
BUMP..
i'm also interested in this aswell. any ideas, anyone?
Me too.. even after almost a week of searching I still can't find this capability
masChmagic said:
Me too.. even after almost a week of searching I still can't find this capability
Click to expand...
Click to collapse
That is probably because the OP posted this question almost two years ago with no luck,because it is not possible.
Hi guys.
I'm new to the Windows Mobile world and only got my Xperia X1 a couple of weeks back. I want to get the TouchFLO 3D interface on there.
However, I want to use CABs which allow me to switch to the TF3D interface and back out again to Xperia, rather than using a cooked rom.
I've looked around and at first it seemed fairly simple, but then the installation wouldn't work because the file didn't have certification security (or something like that).
I've seen articles saying you have to install older versions first, and almost all seem to point to cooked roms.
Does anybody know of a way to install the TF3D interface from a CAB file, and be able to switch in and out of it, like you can do with Spb Mobile Shell 3.0.1?
I have Spb Mobile Shell 3.0.1 and Spb Weather installed, but I really want the TF3D interface... the weather animations on it are absolutely amazing!
Any help will be very much appreciated. Thanks for your time.
Regards
Sonny
If you check out the stickies in this section, one of them is all about programs, panels and tweaks.
http://forum.xda-developers.com/showthread.php?t=441439
Going through it, there is a specific one about installing TF3D as a cab and then running it as a panel.
Wow! Thanks Zenith.
Just managed to install Touch-IT_Blackstone_Manila.cab and then TF3DPanelInstaller.CAB.
Works a charm. Exactly what I was after.
I'm now going to install Touch-IT_Blackstone_Manila_HD_FULL.cab and see how the applications work.
Thanks again for guiding me in the right direction, very much appreciated.
Regards
Sonny
give him the real deal....go to rom section..
Issues With Right Selection Button
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Sorted Button Issue
Hmm, after checking the button settings again, it turns out the Right Selection button was set to Today. Removed the selection... sorted.
sonnysoul said:
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Click to expand...
Click to collapse
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
himuraken said:
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
Click to expand...
Click to collapse
So this is to enable the right button to be assigned? Hmm.... kind of remember having that problem but somehow it was solved. Think with B2 of Daran's cab.
ManilaToday.dll Fixed The Issue!
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
sonnysoul said:
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
Click to expand...
Click to collapse
glad it work for you. i forgot to mention that credit goes to the person that provided this in the touch itJe v7 thread. not sure who it was so please forgive me.
Hi, it is my first post in a long time. Now I'm Xperia user.
I tried to download the today.dll but the link is gone. Additionally, my manila is not working: for some unexplained reason the program keeps trying to enter but did not succeed. It starts and then restart without opening.
Can somebody help me? I'm not inclined to try a Rom with manila for in that case I lose the "Ç" key and the letter recognition.
I use the Brazilian Sony Rom version from April 23, 2009.
Thanks, in advance!
Manila not working on Brazilian Xperia
Hi, this is my first post in a very long time. I tried to install this on my Xperia but got 2 errors:
1 - the right hard key problem and the file Today.dll is no more available at the said link
2 - the manila tries to start but does not enter. It keeps restarting but to no avail!
Please, some help is in order! I use brazilian Sony Rom and a cooked Rom is not na option since I would loose the hard "Ç" key and the on screen letter recognizer.
Also, I could not put the "Transcriber" to work.
Thanks
KMur
Well basically ive just got my new HTC diamond today and was looking at installing a few apps, programs and themes ect.
But after spending 2 hours browsing the forum im just getting more and more confused by the minute about what you actually have to do
Can anyone link me or tell me how i go about getting programs themes and app's on to my diamond?? im mainly wanting to change the home screen (customize it)
Help Much Appreciated.
Jack
Right after further searching i found i need "TouchFlo 3D" i downloaded this and put it in the program files folder then go to install it on my phone and nothing happens, asif i dont even click it .. please can someone help!!
Jack,
Ur diamond out of the box already has TF3D, go to start>settings>today and choose on the second tab ('items') TF3D, click the X in the upper right corner and then your homescreen will change to the one with the nice flip clock on it.
But why don't u start with the manual that came with your diamond?
Get to know the device a little more, use it for awhile and then decide what you want to change to let it better suit your needs.
For tons of information and good applications you're absolutely in the right place here, though it can be a bit overwhelming at first, but you'll figure it out i'm sure (cuz i did to and i'm not a whizkid whatsoever..lol...)
Have fun with your diamond, it's a great device with lotsa possibilities
Nirak said:
Jack,
Ur diamond out of the box already has TF3D, go to start>settings>today and choose on the second tab ('items') TF3D, click the X in the upper right corner and then your homescreen will change to the one with the nice flip clock on it.
But why don't u start with the manual that came with your diamond?
Get to know the device a little more, use it for awhile and then decide what you want to change to let it better suit your needs.
For tons of information and good applications you're absolutely in the right place here, though it can be a bit overwhelming at first, but you'll figure it out i'm sure (cuz i did to and i'm not a whizkid whatsoever..lol...)
Have fun with your diamond, it's a great device with lotsa possibilities
Click to expand...
Click to collapse
Well its not actually out of the box i meant new as in ive just got it
Got it off my dad as hes just upgraded, anyways after searching even more i decided to have a little play.
i followed this guide :
forum.xda-developers.com/showthread.php?t=416211
And used this rom :
forum.xda-developers.com/showthread.php?t=607860
But im getting numerous problems, at first it worked spot on with no problems then after about an hour i went to see if i had a message and it had froze .. now it just keeps turning itself on and off all the time and basically hard resetting itself as every time it turns off i have to do the stylus alignment and date ect.
What am i doing wrong?!
You're doing nothing wrong, but you skipped a step that's crucial when flashing a Diamond:
http://forum.xda-developers.com/showthread.php?t=540290&highlight=mtty
If you perform mtty before you flash a new rom it will most probably solve all the weird errors such as you describe.
Hi, i tryed that but i dont have windows 7 just XP so its not compatable
sure it is compatible, it's even easier to use with XP cuz you don't have to change the drivers.
Be sure to read the first post of the thread carefully, lol, look at the big sentence in red:
NOTE: WORKS WITHOUT DRIVER INSTALL ON XP
Your right its working perfect now, but the tom only came with one keyboard option, and its not "qwerty" can i get an add on or something so i can get the other option's on my device (qwerty, compact,phone keypad)
Thanks for all your help Nirak
Just tryed two other ROM's and there both the same it shows in the screen shots that you can change between the different ones but i keep getting the same keyboard layout no matter what ROM i use, like it wont let me change it to qwerty or phone keypad
Could someone please help me, as its getting quite frustrating now.
Thanks Jack