Restore backup after rom updated - Tilt, TyTN II, MDA Vario III General

Hi,
first at all... THANKS TO EVERYONE!!! ... I've reading everything during a few days, because I didn't receive correctly the calls... I finally I got to update the rom; now I have to check if I've chosen the right one.
The question is: I made a backup of everything when it was wm 6.0, can I restore it after upgrading, knowing it is a different rom, and the wm version is the 6.1????
Thanks again!!!

No,
Don't do it, you'll have to hard reset because there are too many differences between the Roms (even when changing between WM6 Roms).

I would only restore when going back to the original ROM that I backed up.

thanks guys!
it is great to find people who have fronted already the same problems
then I'll just try to create a few direct accesses to the programs I installed in the sd.
Thanks

Related

How to..make a full bckup on new ROM without problems

Hi guys.. I keep reading your beautiful forum everyday, learning some...
As TheLastOne says, one must do a fresh install after a new ROM upgrading, avoiding the backup to overwrite some file of the old Rom.
My question is... is there a way to restore programs anddevice settings (like buttons config,rings,passwords,network settings etc) withouth making conflicts? I was thinking about a backup software that only saves custom elements.. do anybody know a way to do it? Thanks a lot. :?:
PS I read the post from Happygoat about CABs...is very tricky for me...I hope ther is a easyer solution!!!
There are two programs out there that make decent backups...
1. Sprite Software
2. SunnySoft Backup Manager
Both can be customized to only backup personal data, such as phone number database, etc.
To backup settings, the only way is to make your own cab.
What you do not want to do, is to backup everything, including the registry, and restore it after a ROM upgrade...!
These backups are nice to have if your ROMs stay the same...but if you upgrade/change ROMs, and restore such a backup, your PDA could become unstable. This has to do with the fact that the ROM update uses its resources and registry different, and writes programmes differently.
Hope that clears up things for you.
Thank for clear and fast reply @ HappyGoat..
So I will wait for a definitive "guide" from you about registry and settings CAB saving and try out the softwares u mencioned..by the way those sw save and restore also programs relative registration passwords?
I have made a full backup file on my storage card of my registry with PMH, now I think to do the follow:
1) backup all programs and data with Sprite software on sd card
2) upgrade to new rom and hard reset the device
3) reinstall PMH and restore registry
4) reinstall Sprite and restore programs and data
5) ... it will be ok ? I hope so because I really don't understand how to follow step 2 from HappyGoat guide
Thanks for pacience.. (TheLastOne...can you give an opinion..?)
Vicer,
Check this below link from Sprite Software for your Sprite backup.
http://spritesoftware.crmdesk.com/answer.aspx?id=66&back=browse.aspx#p24
I can confirm that you can successfully backup after a ROM upgrade and you wont lose any new ROM functionality after restore. I have tried this with various ROM upgrade and it works. Follow the instructions and every thing will be fine. However one thing you should note that when you restore from the old rom and if the program get stuck at one point, then dont feel afraid just soft reset and restore again. Remember that if your restore is finished with out any warnings it means that it is restored perfectly.
I hope this helps and if you need any information then please let me know.
Hemant.
Thanks a lot Hemant..I will try soon!!!
Thanks Hemant, I've been looking for this answer for a long time!
Backing up the rom because of garanty. How to?
My question is: how to backup the entire rom, when we got the device for the first time?
Cause, if the device gets with a problem, and went to the "doctor", the garanty is made (at least where i live), by the original rom.
Someone can help me out?
Re: Backing up the rom because of garanty. How to?
pena_leve said:
My question is: how to backup the entire rom, when we got the device for the first time?
Cause, if the device gets with a problem, and went to the "doctor", the garanty is made (at least where i live), by the original rom.
Someone can help me out?
Click to expand...
Click to collapse
Anyone?
Re: Backing up the rom because of garanty. How to?
tambeng said:
pena_leve said:
My question is: how to backup the entire rom, when we got the device for the first time?
Cause, if the device gets with a problem, and went to the "doctor", the garanty is made (at least where i live), by the original rom.
Someone can help me out?
Click to expand...
Click to collapse
Anyone?
Click to expand...
Click to collapse
Unfortunately I had many problems after the restore with Sprite...I reinstalled all from scratch and now is all ok (unless I downgraded radio to 1.10 that is more stable in my opinion) Ref your question... I'm not an expert but I read the wiki everyday...and:
1) follow the getdevicedata procedure to know your original SHIP rom.
2) find on the xda ftp site the one that mactch exactely with your data
3) you dont need more to dump your Rom!! anyway on the forum you can search for "dump rom on sd card" to find the answer to your original question. Hope this helped..byez

upgading without reinstalling everything?

Hi all,
I'm semi-noob on this--I've unlocked, upgraded my dopod 838(wizard) to one of the qtek9100 roms a few months ago and now I see the new official AKU2 roms!
I did my best to stay away, but now that I know it exists, I must upgrade! However, after having to reinstall everything and do all my tweaks when I did my last upgrade, I've been researching like mad to find an alternative to redoing everything.
Is there a way to backup my files, settings, tweaks, etc and then do the rom upgrade and restore those files/settings/programs so I don't have to dig through all my stuff to get my phone back to the way I like it?
Sorry for a dumb question! Just wanted to know for SURE before I hit the button =)

Backup existing ROM-Help needed

Hello,
Is there any proven method to backup the existing rom to a form of files like the Updated ROM (nk.nbf,RUU,etc.)?
I would like to preserve my original wm5 ROM since it contains Payed application i can't re-register.
After backing up-it will be WM6
Thanks
Roy
im looking for the same thing too
because i want to try out other roms but i have alot of stuff on my current phone
i know theres a utility that will backup to the minisd card and your able to back it up later
no luck yet
im still searching the forum and google though
No, for most backup applications, you can't restore a WM5 software backup to WM6 device, otherwise weird incompatibility will be happened (such as crashing Contacts)
Yes ! very true,there wud be a incompatibility issue,however if you backup your wm5 rom on a Sdcard,that is also only possible if you have a CID unlocked device,then in time of any emergency,you can reflash it back to your phone,through Sdcard method to restore it back in working condition,but all you applications or programs in wm5 cannot be restored back to wm6 OS.
Cheers
Thanks for you help,
my thoughts were to keep the original ROM for selling this device..
Roy
http://forum.xda-developers.com/showthread.php?t=276963
This is the way to make a copy of your current ROM of the Wizard to a SD card.
As stated above this does NOT include any application or data you add yourself to your Wizard but only those apps that comes along with the ROM in the first place.
This should be just fine to have a backup of your current WM5 but does not help to "preserve" any paid applications you installed yourself neither your contacts etc.
Good luck!
..............

Sprite backup restoring question

Recently I had to hard reset my phone.. so I thought since I'm hard resetting anyways, why not try a new ROM..
So I installed the new ROM and Blackberry connect doesn't seem to work.. so I had a sprite backup when I had my old ROM.. but now I have a different ROM.. will it be okay if I restored my backup with my old ROM? or is that a bad idea?
sorry this was posted in another section and no one seems to be replying.. maybe I posted in the wrong section? I don't know.. but I didn't get any response and I need urgent help.. because I don't know how many important emails I'm missing now..
DVS_WiNdz said:
Recently I had to hard reset my phone.. so I thought since I'm hard resetting anyways, why not try a new ROM..
So I installed the new ROM and Blackberry connect doesn't seem to work.. so I had a sprite backup when I had my old ROM.. but now I have a different ROM.. will it be okay if I restored my backup with my old ROM? or is that a bad idea?
sorry this was posted in another section and no one seems to be replying.. maybe I posted in the wrong section? I don't know.. but I didn't get any response and I need urgent help.. because I don't know how many important emails I'm missing now..
Click to expand...
Click to collapse
Never restore a full backup from one rom to another. Only restore a full backup to the same rom (and same version even). The reason for this is your full backup will put the registry entries from the old rom onto the new one. Well most likely that won't match up (ie: WM6 entries in places are different than WM6.1 entries. And fixes made in a Dutty's rom aren't the same as in Confused Stu's or someone elses since each are different etc).
Okay, thanks a lot! that was a fast response.

Change rom and restore backup

I've searched at the forum but couldn't find a good answerd for my question.
I got a Vodafone NL X1 it's currently on the Vodafone R2 release but i want to change it to the generic release(hate the vodafone crap). So my question is do I need hard spl to flash another official rom to my X1. I know that you need hard spl to flash a cooked rom but is flashing another official rom the same case?
And another question, i've read on websites that spb backup can restore a backup after a rom update. Does anyone have experience with that and is there a big change that i will have problems with that? And if I use this when I flash the generic rom instead of the vodafone one to my phone does it also restore all vodafone crap?
Hope someone can help me
thanks in advanced,
killer8nl said:
So my question is do I need hard spl to flash another official rom to my X1. I know that you need hard spl to flash a cooked rom but is flashing another official rom the same case?
And another question, i've read on websites that spb backup can restore a backup after a rom update. Does anyone have experience with that and is there a big change that i will have problems with that? And if I use this when I flash the generic rom instead of the vodafone one to my phone does it also restore all vodafone crap?
thanks in advanced,
Click to expand...
Click to collapse
My 2c worth:
a) official ROM's have SPL in them, so you don't need hardSPL to flash these
b) regarding "restore after ROM change", in reverse order:
if you restore a full backup from your existing installation after a ROM change, it will obviously restore all that is currently there - including the Vodaphone fluff
both Spb and Sprite offer "full restore after ROM change" options - however, registry changes from one ROM to the next make this risky. Most cooks will advise against it
Oke thank you for the answerd, will do a fresh install then after the rom update
SPB restore can let you choose what to restore, the necessary things will be contacts, sms, email and documents, you can skip the programs, registry and other non personal things, but like this you will need to reinstall all programs and configure them from scratch
killer8nl said:
Oke thank you for the answerd, will do a fresh install then after the rom update
Click to expand...
Click to collapse
Yes, that's the technically correct way.
After you've upgraded the ROM and re-installed all your apps, (say) weekly Spb or Sprite backups for a full restore are obviously viable. I've been doing this for about 5 years now - saved my bacon more than once.
Still, I agree that re-installing all the apps after a ROM upgrade is a real pain in the butt. People who change ROM's constantly must have another day phone on the side
I tried to update the generic NL R2A rom from my vodafone NL R2A phone but it doesn't work. It keep saying "No image file!".
I also got another question. Is it really necessairy to format my ms before flashing. Because I only got the hancock ms and it said not to be working again when I format the ms. Thats why I didn't format the ms yet and only tried without formatting.
I have read almost all tutorials but all said I must use the hard-spl but other forums posts said I don't need when using a official rom. Anyone can help me a bit further please?
Regards,

Categories

Resources