ActiveSync Problem - Tilt, TyTN II, MDA Vario III General

Hi there.
Bit of a weird problem with my TyTn II and PC. I have synced my TyTn II previously with my Laptop and it works all perfectly fine (still syncing perfectly). However when I try to sync it with my PC (which I haven't done before) the ActiveSync logo just keep spinning round until it says something along the lines of a connection cannot be established. I have tried the Troubleshooting tool that ActiveSync provides but it doesn't discover any problems. Any help with this issue would be much appreciated.
Thanks a lot and keep up the great work! Used this forum for two of my mobiles and love the material you all produce.

Untick USB to PC, that should do it for you.
Start > Settings > Connections > USB to PC.

Related

Can sync via USB but not via Bluetooth

Am setting up my Tytn II with a new Toshiba Satellite Pro U300 laptop. I have no problem with syncing via USB but cannot get Windows Mobile Device Center to see the device via Bluetooth.
Half the problem may be the Toshiba Bluetooth software, which takes over the standard MS bluetooth software, although I managed to use the Tytn to share an internet connection without much fuss.
On the handset, when I pair it with the PC it sets up a COM port (COM9) and Wireless Stereo support - should it have another option under Partnership settings or something?
On the PC it sets up a dial up networking connection and a Network Access (PAN) connction, both of which seem to work fine. I can browse the Bluetooth shared folder on the phone or PC without problem, so what am I missing with regards to syncing???
Any ideas would be appreciated, but please document it clearly as I am sure I am missing something obvious.
Thanks in advance
Martin B
Try this, step by step, it worked for me perfectly!
http://forum.xda-developers.com/showthread.php?t=340954

Card Export II stopped working

Hi all,
Earlier today I tried to connect my Kaiser to my PC as a storage device, using Card Export II v3.06 registered version (and eventually tried v3.07)
But for some reason it has stopped working (always worked perfectly before), despite
several installs and uninstalls
soft resets (in general and in between (un)installing)
changing battery recharging over USB settings
changing Advanced Networking over USB settings
Installing WM5torage v1.8 did not solve my problem. (Kaiser popped up on computer but did not display any data)
Here's what I get when using Card Export:
I press 'connect' in Card Export II and connect USB afterwards
I hear XP recognizing a new device (device is known and installed before on the PC - makes characteristic sound)
After 1 sec XP makes the 'device disconnected' sound.
Card Export automatically switches back to 'Connect' without displaying any errors
Activesync connects without any issues to my PC
Any ideas? thx anyway...
yeah. I have an idea.
did You pay for this great prog?
I've read somewhere, that it tends to act this way if it's cracked.
so... do as I did. pay for it. always support developers of apps You are using. I have a sce II 3.07 and didn't have any problems with it ever. it just simply works.
br
bro

Xperia Sync with Mac

Hi,
Just got my xperia today, but I'm still new to Windows Mobile. I want to transfer media files to my phone from my mac, is there any software that can let me do this relatively easily like by drag and drop? My mac doesn't seem to even recognize the x1. Also, I have a 8gb microsd card already inserted into the phone, but it doesn't seem to recognize the memory at all. Any help would be great, thanks.
I don't have a mac, so can't help much, but there's one thing I can think of. you might have tried it already, but...
Did you try going into Start > Settings > Connections > USB to PC and setting this to "disk drive"? I would have thought that this makes the phone act just like a USB drive, so there wouldn't be a problem as long as the Mac can see standard USB sticks.
Active Sync certainly won't work, it being Microsoft Active Sync, but maybe as a USB "Drive" it might...
Hi ... You must use Missing Sync ... you can use it via USB or bluetooth ...
Bye.
The Missing Sync seems the most popular with Mac users - apparently really good:
http://www.markspace.com/products/windowsmobile/mac/windows-mobile-sync-software.html
I just use the Disk Drive option in USBtoPC.exe ...
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Sync wth Mac
Hi Guys,
I am using a WM5.0 Dopod 838 Pro but looking to change to experia soon. I used eltima syncmate to sync my Dopod to my Mac. The freeware works great and IMHO, it is more stable than Missing Sync.
Cheers
aFo3262 said:
Hey guys, thanks for the quick responses and help so far. The disk to drive has an issue because it needs a memory card to be inserted, and mine isn't being recognized for some reason. Oddly enough, whenever I unplug it from the miniUSB, the memory card suddenly becomes available. I downloaded the Missing Sync but I may have gotten a weird version or something(4.0 something) that was talking about a patch.
Feel really stupid about this. Is there any easy way to just drag and drop music and videos onto this phone?
Click to expand...
Click to collapse
What ROM are you running?
I will check the rom version in a second, but I remember that it was dated for the 29th of August. I got the x1 to mount as a disk drive, but I was confused about where to drag my media files for the media panel to recognize the stuff in my storage card. Not only that, but dragging and dropping was incredibly slow and I was only able to get 5-6 songs on to my phone before the lag became unbearable.
hey guys thanks for the help in the missing sync. New problem now lol. I transfered my music and vids to my memory card and the media panel read it fine. But my touchFLO3d manila HD can't seem to detect any media from the card at all. Is there any way to change this?
I got my Xperia on Friday and have spent the last 2 1/2 days trying to sync it with my Mac using Missing Sync. I was using MS V4.0.3 and then after upgrading to V4.0.4 and a hard reset (I think) things stopped working. The MS activity log said it couldn't connect to the sync client on the X1 (I also couldn't sync my old Dell Axim X51v either). I tried uninstalling and re-installing multiple times but still no success. After 2 days, I binned MS thinking it was the problem and purchased Eltima's SyncMate. Again same result, couldn't connect with the sync server.
After much googling if found the following post (http://forums.markspace.com/viewtopic.php?f=5&t=5349) in Mark Spaces forums of all places. Copied and pasted the commands into Terminal restarted and everything is fine. Good old Apple.
Hi,
Using SyncMate right now with my new X1.
I'm using the free version, so far contact syncing is ok with the only problem being certain number fields in Mac's Addressbook not showing up in the phone. But this is pretty common problem among all Mac <-> WM syncing. Just need to play around with the info fields in Mac Addressbook.
Right now the problem is the internet sharing to the phone is not working (sharing Mac's LAN connection to the phone). I know this used to work when I was using the same copy of SyncMate with a WM 5.1 Palm Tero I had borrowed. So far SyncMate doesn't seem to show the dialogue box that it discovered a internet connection and is sharing it with the phone.
Of course the Mac has working internet connection.. I'm using it now...
Any help and advice on this issue or any other Mac <-> WM tips are welcome!
As was said above, I use syncmate on my wifes. I used to use missing sync but it didn't always seem to recognise teh phone and had limited features. So I use Syncmate now. Have also tried pocketmac whcih was similar. Both softwares allow you to sync files, contacts, calander, install softwares adn will also mount the phoen as a hardisc on your mac without stopping eth phone from still being able to access it (if you put it into usb disc mode the phone no longer has access to teh memory card untill you disconnect). They can also connect wireless, usb or bluetooth.
I'd try either of the above instead of missing sync. Missing sync just didn't do the job well enough if you ask me.
As for the internet conenction issue, mine just works......have you checked teh connection settings in teh actual phone?
Hi
I tried using the free version of Syncmate with my Xperia, it doesnt recognize my phone. I am using the latest R2 ROM version. Any help ???
thanks!
internet
can please somebody help me, i have a mac and se x1 and i cant connect on internet from my mac via x1 i tried everything over usb, bt, internet sharing, sync mate , nothing works please help.
p.s. sorry about my English
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
2. On the X1 start Internet Sharing - PC CONNECTION should be set to BLUETOOTH PAN and NETWORK CONNECTION to whatever your ISP requires - SELECT CONNECT down in the task bar (bottom left) - should now say CONNECTED.
3. On your Mac open the BT Preference Panel from System Preferences or the clicking on the BT status icon in the menu bar (top right of screen). Click on your Xperia device (to select it) in the left-hand side-bar. Its status should be displayed in the right-hand panel (paired - yes; connected - no). Click on the task button (the one with the cogged wheel next to the minus button, bottom left-hand corner of the BT preference panel and select CONNECT TO NETWORK - status should change to connected.
4. To disconnect - select disconnect in the task bar of Internet Sharing on the phone or disconnect from network in the Mac's BT preference panel.
The process has to be done in this order. If you don't connect to the internet with the phone first, the process fails.
nonno said:
This has been posted in this forum before but here it is again … I've never successfully used my X1 as a broadband modem via USB (it has something to do with ActiveSync, I think however, I use my X1 as a modem all the time using BT).
For a BT connection:
1. Pair your X1 and Mac (using the OS X BT preference panel)
...
Click to expand...
Click to collapse
What OSX version do you use to build up the PAN between Mac and Xperia?
Seems not to be OSX 10.4 because it has no
task button (the one with the cogged wheel next to the minus button, bottom left-...
Click to expand...
Click to collapse
Sync Xperia with mac
Hi everyone, new to the forum so bear with me. I've recently acquired the software "The Missing Sync" to be allowed to edit and fix up my phone through my mac. When I plug in my phone, the computer only recognizes it as a mass storage device and the program will not detect it. Do I need to update the firmware on the phone to up to date with the most current version of The Missing Sync? Any help would be greatly appreciated.
Regards

ActiveSync Problem [USB can't connect]

Dear all,
sorry if this is repost.
i found it quite trouble for me, as my TYTN II suddenly stop syncing with my notebook.
it shown Microsoft ActiveSync can't recognize any port plug to TYTN ii, even if it can't sync with notebook active sync, but the phone still able to charge via USB port, anyone experience this before?
fortunately my Tytn II still able to sync via Bluetooth connection, but NOT via USB port.
Some recommended action that i've run so far:
1. uninstall & re-install microsoft activesync 4.5
2. change usb port
3. change with different notebook with activesync 4.5
4. hard reset my device
5. flash to another ROM via USB
6. etc
after doing all the thing, but the problem still there, only able to sync via Bluetooth connection.
hope anyone could give me a clue here.
thx & rgds,
What OS are you running on your notebook ?
Activsync for Windows XP and earlier
Windows Mobile Device Center for Vista, Wimdows 7
I am using Windows XP SP3 and using Microsoft Active Sync 4.5.0 build 5096
I also have tried into Windows Vista Home premium,
and couple hours ago I've tried to sync my friend O2 and it was successfull syncing with his device, and then I re-tried to sync with mine, but no hope
any clue really appreciate that
Try going to the "USB to PC" settings on your phone (probably under Settings>Connections) and unchecking "Enable faster data synchronization."
hmm, I've tried that before and still no luck,
do you think any possible hardware failure
It's possible that you have a hardware failure. However, that seems unlikely if you can flash using USB and it can connect to those other systems. Two other trivial things to try:
1) Try a different cable
2) Is "Allow USB Connections" checked in File>Connections Settings in ActiveSync? (I'm not trying to insult your intelligence, just covering the bases)
WonkotheSane said:
1) Try a different cable
2) Is "Allow USB Connections" checked in File>Connections Settings in ActiveSync? (I'm not trying to insult your intelligence, just covering the bases)
Click to expand...
Click to collapse
it's okay... i am looking for clue not for arguing
anyway, i've done that
1) already try 3 different cable, the last one i tried is with two devices my tytn ii and my friend O2
2) already done that too, been trying uncheck/check "Allow USB connection" in Microsoft Activesync in my Ms XP SP3 notebook.
btw flashing via SD card is applicable because it's not related with USB port right
regards,
I'm having a very similar problem. I have 2 Kaisers, one factory AT&T ROM WinMobile 6.1 and the other running a cracked 6.5 ROM.
Two computers, one Laptop running Windows 7 Ultimate x64 and a desktop running XP w/SP3 32 bit.
About a month ago all phones stopped syncing to all computers. I just get a "Unrecognized USB device" error on both computers using either phone.
Does Anyone know if MS released a USB driver update that may be causing this? I have tried every possible phone setting listed on the web, uninstalled activesync on XP and nothing seems to work. It really feels like a Windows USB issue to me. Just my gut feeling.
Doug
I have one more stab in the dark. Plug in your phone, open the device manager on your computer. There should be a device category called "Windows CE USB Devices." Expand that category, right click on the device in that category and uninstall it. Unplug your phone and plug it in again. This should reinstall the device driver. I'm guessing that the original drive got corrupted somehow.
WonkotheSane said:
It's possible that you have a hardware failure. However, that seems unlikely if you can flash using USB and it can connect to those other systems. Two other trivial things to try:
1) Try a different cable
2) Is "Allow USB Connections" checked in File>Connections Settings in ActiveSync? (I'm not trying to insult your intelligence, just covering the bases)
Click to expand...
Click to collapse
I had a similar problem as the original poster, and it turned out to indeed be a hardware problem. The SD-card reader was faulty, and ActiveSync would not recognize the phone while an SD-card was plugged in (Nor would WM5Torage work). Removing and reinstalling drivers did not work either. The SD-card was fine, when tested in a PC reader and my Touch HD, so I figured it had to be the kaiser.
I fixed this *today* by replacing the PCB in the display part of the kaiser. Part costs about $40 (Search for item ID 380187854526 on eBay to see which part)
The disassembly/assembly instructions required are in the service manual, available at a dozen places online.
Hope this helps! (Couldn't post links )

Bluetooth

Hi,
I just bought a Bluetooth dongle for my PC. (Trust Ultra Small Bluetooth 2.1 Usb Adapter 25 M)
The main reasons for buying this was so I could sync without using one of my very spare USB ports.
Another big reason was that I really want to try SideShow.
So, I hooked the thing up, installed it. Works like a charm for most services (files etc). It just doesn't work for two things: ActiveSync (on the phone)/Windows Device Center (on my PC) and Windows SideShow. Yay.
Could you please help me out?
To summarize:
PC with Vista Home Premium,
Trust Ultra Small Bluetooth 2.1 Usb Adapter 25 M,
HTC S730.
Not working for ActiveSync nor SideShow.
x5x_tim
PS: I installed something called "X86-PC Drivers.cab" I found in some thread. That's supposed to be the drivers for the SideShow service on the PC. (I think I installed them, I did not get an error from Rundll32...)
EDIT: what might be of use: I can't get the devices to pair if I use the PC to initiate that. The PC does not find the phone untill I pair them using to phone to initiate.
I don't know about SideShow but I managed once to ActiveSync my Wings through Bluetooth. Just be sure to remove any security restricition on your Bluetooth settings on your device. Like Secure Connection etc... Also, setup a serial port when you connect with your PC and then, at PC ActiveSync settings, at connection settings -> Allow Connections To One Of The Following (Com 4 or whatever). And then, at ActiveSync on your mobile, connect through Bluetooth. Try it and come again if it doesn't work.
Yes! Thank you. It's syncing as I type. That COM4 did the trick!
In the same way, you can have Internet on your mobile through Bluetooth's activesync connection. It is helpful if you don't have wifi on your mobile.

Categories

Resources