Related
Hi I am getting 3 errors after Doing Reset
My system
HTC Wizard, TMO UK EXT rom
error :-
1) the file `sddaemon` cannont be opened. Either it is not signed with a truste certificate, ore one of its components cannot be found. if the problem persists try reinstalling or restoring this file.
2) the file `elatepushservice` cannont be opened. Either it is not signed with a truste certificate, ore one of its components cannot be found. if the problem persists try reinstalling or restoring this file.
3) Magicall the service did not start cotact [email protected] for help.
Anybody got any ideas on how to solve please
Manythanks
Gary
try reflashing WM6 again.
Had the same problem with wm5 with 2.24 rom if i reverted to tmouk rom all was sweet (i think it was 2.22 tmo) was wondering if anyone else on tmouk ueing there ext rom knew how to fix
go to settings > system panel... and look for startup manager and remove the sddeamon and whatever else.
daveywave said:
go to settings > system panel... and look for startup manager and remove the sddeamon and whatever else.
Click to expand...
Click to collapse
is that safe to do?
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Hi,
Try deleting the 'Internal Storage' folder using the file explorer and soft reset. 'Internal Storage 2' should be automatically renamed to 'Internal Storage'.
Hopefully this work for you.
DT
Did that. But still can not install any CABs...
Activesync mode
Check if your diamond is not connected as disk drive (normally when you connect it to your computer you have the choice to connect using activesync or disk drive). If you did connect using disk drive mode, you will not be able to install programs correctly. This is why it creates a 'internal storage 2' folder when installing programs.
I rearly use ActiveSync to install programs. I have them mostly as a CABs. So last advice does not fix the problem. Thank you though.
tarrytownfads said:
I have HTC Diamond for 10 days (Asian version , ROM 1.35.707.3 WWE). Set it up and successfully used on US T-Mobile until yesterday when I’'ve got an error message on the phone saying that the program I am trying to open can not be open because of the missing dll file. I had few different software which I use on day to day basis installed on the phone like Pocket Informant, SPB Traveler, Trip Tracker, Cootek TouchPal. After the error message I tried to open other programs, but whatever was installed on the internal storage of the phone gave me an error message.
Next I tried to reinstall those programs and got the message saying – “…the installation was unsuccessful…”. Next I decided to do the hard reset and reformat the internal storage. In the end of the process I'’ve got the message saying "Compare moviNAND error". It stays on screen until I hit the reset button.
After restart the device goes back to the factory settings. The internal storage is available, except I find "internal storage" and "internal storage2" folders. The CONTENTS folder which I had there originally is missing. I can copy files there, but when I attempt to install the software I am getting the following message: "Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate."
I know that a lot of you guys went through hard resets. Did anyone had this problem? Can any one help me to fix this?
Click to expand...
Click to collapse
this internal storage 2 is because of messaging (attachments of email messages that are appointed to be stored in internal storage). when u want account to store messages to the internal storage some times it doesnot work in order to get this worked just go to MESSAGING and MENU >>>> OPTIONS >>>> and here u see all accounts and just at left side u see storage and there uncheck the item that says When available use this storage card to store attachements and then RESTART and the problem should now be solved.
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
tarrytownfads said:
Mahmood, Thank you for your reply. Good point.
But my main problem is that I can not install any programs on my Diamond - neither to the Main Memory nor to the Internal Storage.
Any idea how to deal with the ..."Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate"... message?
Click to expand...
Click to collapse
FIRST install the sdkCERTF.cab see the attachment see if it works !!
which softwares are u installing again if u are installing them again maybe they were not deleted completely u can use taskmanager to terminate the process of that program and then reinstall. Use the Certf cab file and install it in your device may be this will help !!
Well, the whole point of my post is that it does not allow me to install ANY CAB file. I just tried it and copied both programs to the Diamond. After clicking on SDKCert.cab I've got the "Installation of SDKCerts.cab was unsuccessful" and with the TaskMgrv3.0 the message is "The file 'TaskMgr' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
What else could be done?
"digitally signed with a trusted certificate" issue
Guys, can anyone help here??? I can not believe that no one knows how to fix this...
If I were to flash my ROM to one of the newer ones from this forum, do you think it would fix the "digitally signed with a trusted certificate" issue?
Got the same issue with rom 1.37 :/
Any ideas since then ?
bringing this back to the top. I am trying to install an autorun that is designed to run from an SD card (not sure if this makes a difference or not) and when I do it says its not a trusted certificate and won't run. Have already installed the sdkcert.cab file and it states it installed correctly, but still the problem persists.
Fixed my install problem
I used Pocket Mechanic to fix registry issues and remove all trace of the program that first failed to install. All subsequent installs work fine.
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...