Start Menu Problems - Tilt, TyTN II, MDA Vario III General

Morning All
I need Help my startmenu which used to work just fine but now every time you tap it the drop down list doubles up the recently used programs until the list scrolls off the screen and they are then just listed as icons with no program name,I don't really wish to do a hard reset and suggestions as how to remove them.
I think it started after I installed FTouchSL 2.5 which has now been uninstalled.

Also the "taskmanager drop down" from the top right hand side has gone walk about

Restored from backup not many progs to reload
Working now

commanderaj said:
Morning All
I need Help my startmenu which used to work just fine but now every time you tap it the drop down list doubles up the recently used programs until the list scrolls off the screen and they are then just listed as icons with no program name,I don't really wish to do a hard reset and suggestions as how to remove them.
I think it started after I installed FTouchSL 2.5 which has now been uninstalled.
Click to expand...
Click to collapse
Its because you didn't assign a program to all of your application button in the cube. This was discussed earlier, but would not be surprised if you couldn't locate it.
I am assuming you had SCLPC++ .51 installed correct? Once installed make sure you download the Cube Configurator 2.0 and assign every icon to a program. Save the init file and soft reset. Your problems with the cube will be gone!
Hope this helps.

Thanks will reinstall it soon and try again It may not have been installed correctly I certainly hadn't assigned the all the app buttons
Some of these threads are getting far too long to be of any use!
Is there a definitive guide to installing to SCLPC++, because I would love to have the cube working, it was the best feature of the Touch Dual

Related

Need Task Switcher for WM6

Hi all. I am on the hunt for a decent Task Switcher app that will work with WM6.
I used to use Wisbar Lite and loved it but it looks yuck on WM6 as it forces the older (WM5 Close Icon)
What I need is Something that I can launch with a button and will show all the running apps in a pop up window and allow me to switches between them by tapping on an application icon in said pop up window.
And it must not change or add anything to the start bar.
Any ideas?
Thanks
Jules
pBar
have you tried the pBar application that is around on the forums? it's freeware and was based on the old wisbar. seems to work well, but i don't think i am using a full wm6...just the beta ish...or wm5 heavily skinned wm6....
do a search and you're bound to find it...
ZaJules said:
Hi all. I am on the hunt for a decent Task Switcher app that will work with WM6.
I used to use Wisbar Lite and loved it but it looks yuck on WM6 as it forces the older (WM5 Close Icon)
What I need is Something that I can launch with a button and will show all the running apps in a pop up window and allow me to switches between them by tapping on an application icon in said pop up window.
And it must not change or add anything to the start bar.
Any ideas?
Thanks
Jules
Click to expand...
Click to collapse
I'm running a PDAviet WM6, it has this in it's ROM. Tap and hold upper-right corner.
I love it when I can answer my own questions
After searching and using a bunch off apps and not having any luck I just tried Small Menu and It works 100% in WM6.
Meets all my requirements
More news or problems as I find them
Jules
gspocket magic
best app that does all you want
Thanks for the replies.
Vilem. please can you elaborate on that?
I am using Davit ver 3 and have not seen this app.
Sandrobber. Thanks for the file, I have tried the app before but it doesn't match or look good on the stock WM6 start bar. am I missing a setting or something?
So far SmallmenuPlus is the winner for me.
Jules
I have to say, people I know that have been running Crossbow for a few months, have found SmallMenuPlus to be great.
On an unrelated note, I've run SmallMenu pretty much since I got my first WinMob phone, and can highly recommend it. It's not perfect, but it's very useful.
PocketMagic is also a very worth (free) contender.
I don't use Wisbar (resource usage....) so can't comment.
V
Does anyone know a way to exclude some applications (activesync and phone) from smallmenuplus task list?
Killing the phone process during a conversation or closing activesync during a pc sync can be really dangerous/disappointing.
No, I don't think you can, hence my "It's not perfect"
Try writing to the author, he's still active, although the app only seems to get minor updates these days.
V
I've been using Dinar HandySwitcher 2.5 from DinarSoft for a good while now. It has the decided advantage that you can also remove the application from memory, or all applications from memory, right from the main screen. Most times the only way to clear applications is through the start/settings/systems /memory route or a hard power down.
It's not free but it is cheap, easy and effective. Don't know if it runs on W6.
Trying it now.
Works fine in WM6.
Thanks
pocket magic
you can chenge the pictures of the start bar in pocket magis but it takes some enginutity and time. your have to edit the bitmap. Play aroung with it enough and I'm sure you can make it even look loke a vista button
http://homepage3.nifty.com/UK-taniyama/tools/GSPMagicPP.html
@ZaJules,
Which taskswitcher did you settle with in the end for WM6?
Hadn't seen this thread, thanks for bumping it up . So I'm trying SmallMenuPlus and this seems like a really nice (and fast) replacement for Wisbar Lite. The one thing I miss though is there is no soft reset in the menu. I like having that ability to do a soft reset via the menu due to the case I have doesn't have easy access to the reset hole on the side. Anyone know how to add this?
Also, does SmallMenuPlus not close apps when you press the X? Does it just put them in background? Can that be configured?
SKmenu
Skmenu is the one for me. Its not free(for the cascading menu part, which can be deactivated! ), but the taskbar switching works 100% with the demo. I have always used it, its very light, and its accessible 100% of the time= very quick(response speed is the issue i have with the rest of the apps mentioned). Although it doesnt come preconfigured setting it up takes less than a minute, and its easy enough for any level user.
The best solution for me. I also use an Alt-tab application mapped to a hardware button for easy access, like when driving etc...
about taskswicher
sry my poor english
Since 2004 and IPAQ6340 until today wizard/universal/hermes WM6 I have used HaaliTS TaskSwicher-2002.
Lives silently in upper left corner, shows additionally free battery and memory.
Dont needs install, copy exe, make shortcut, all )
Perfect for me and my friends (~25-30 units).
Have tested all here overmentioned progs, but find it best. Small footprint, etc.
regards
And what about this little tool??
http://forum.xda-developers.com/showthread.php?t=302643&highlight=alttab
BTW: I´m using ilauncher and you can put taskmanager to button. Works perfekt in every WM6
papamopps said:
And what about this little tool??
http://forum.xda-developers.com/showthread.php?t=302643&highlight=alttab
Click to expand...
Click to collapse
Exactly what I needed!

Registry and Spb Pocket Plus

Hi Guys,
I've a problem with Spb Pocket Plus and with the default settings of my TyTN II.
I'll try to explain, because my ROM is in italian and I don't know how to translate them in english.
So, these are the facts:
I've installed the Trial version of Spb Pocket Plus 4.0.1 and I've checked the option to override the default X close button as you can see in pc_capture1.jpg.
Then I deselected it and reenabled from Settings - Buttons the two default items as you can see in pc_capture2.jpg.
But as I can try on my device, after a soft-reset, I can't see in the upper right of the screen the item that can let me choose to see and eventually close the applications running on the device pc_capture3.jpg
Now my question is: what is the registry key that I have to (re)set so I can reenable that functionality overriding that ugly settings from Spb Pocket Plus (that I've deinstalled but without success in resetting the item I need)?
Yes, I know it's difficoult to understand that pictures that are in italian, but if someone can help me, I'll be glad with him/her.
Bye,
ghale.
I know this dosen't really help because you seem to be talking a different avenue than I did... but I had to totally uninstall to get the HTC X back. There is a CAB for the HTC task manager that you might install and see if it over rides the SPB settings...?
Sorry.
If you have both Pocket Plus and the HTC Close Button app running at the same time, your results aren't likely to be good. Either disable the Close Button in Settings, or shut down PP's close button in it's settings, and then soft reset. If that doesn't work, remove Pocket Plus (your settings should be preserved) and reinstall.
Done.
I've the same problem.
Thanks, btw.
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Simply means that the problem was NON solved.
So I've reinstalled Spb and I'm trying to use the Spb method to close the application, instead of the HTC one.
I've tried also to install the HTC Task Manager, from 1.51 to 2.00, overwriting the ROM files, too, but without success.
I've tried a lot of time, but no solution.
If someone has other info, please let us know.
Bye,
ghale.
PerfAlbion said:
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Click to expand...
Click to collapse
Go to settings - system - task manager - button and make sure both boxes there are unchecked. I run Pocket Plus (3.2 upgraded recently to 4.0) without an issue. If that doesn't resolve the problem, it may be something else you're running.
You might try posting your question(s) on the SPB forums. Mods there are most responsive to issues, especially with newly released versions of their software.
http://www.spbclub.com/forum/

2 most recent programs in start menu are duplicating

This is kind of bizarre...every time I click on my start menu, the number of items shown as the recently run programs just duplicate themselves! For example, if I have two items there, the next time I click on my start menu I will have 4, and then 6, 8,10,12, etc...
Aside from that, once the list goes over 10, the start menu turns white and I can only see the icons without the text labels of what they are.
Anyone else run into this or know how to fix it?
Yes, had the same thing. Backed up my PIM data, then HR'ed and it was the last I saw of the double-then-white start menu.
But it was EXTREMELY annoying, damn right.
Ah, one more thing: you mislabeled the issue but described it accurately: it's always two latest entries that get doubled, until the whole goes out of bounds and turns white...
Fixed part of the title
I HR'd a couple times and continued to have the same problem after re-installing various software...so I tried being more deliberate on installing the software and testing things out after each install (if for some reason having a certain program in the list was causing the problem). So far things are good.
i had the problem when i was using the Cube on my phone. I changed from the original 3 sided cube to the Sclpc++ cube and no longer have the problem. So if you are using one of the cubes, that may possibly be the problem.
I thought about using another, but ended up going with sclpc++ from the get-go. There's a -slight- possibility that the problem could have been from accidentally trying to run multiple instances of efrost's touchflo software. But that's just a theory...and from what it sounds like, the problem occurs in different instances that aren't visibly linked.
you might be on to something as I've just realized that the whole thing started soon after my changing ROMs to Schaps' 4.31 AND installing a cube with its own FtouchFlo config... right now, I'm using an older cube (Vista-style by poorlyduck), but have deactivated Schaps' TouchFlo. And haven't run into the white menu since.
Then again, it may be just an unfortunate combination of installed soft and/or customizations...
I'm not so sure that it is the cube though...I ran into this problem when I first received my tilt and was isntalling software on the stock image. After removing and the SR'ing the device followed by the software re-install, the problem went away...granted it only happened once. Regardless of when it happens, it seems thusfar to correct itself after re-installing/removing software so it's hard to say exactly what's causing it.
This happens to me at least once every two weeks. I have found that it occurs when program shortcuts get moved down to the bottom box on the start menu and are then grouped in with the "Programs" and "Settings" folders. If you go into "settings" then click "menus" and change a few check marks around it should reset, however there will still be a shortcut or two on the bottom box. Another thing to try is to go into the windows folder then the start menu folder and just play around in there until it goes away...maybe delete the shortcuts in question and then recopy them back if they disappear from the start menu. Uninstalling and reinstalling the offending programs works as well, it's just a little more hassle in my eyes. My two noob cents.
-Louis
Try checking this out here...I'll be trying this out being as this has been a suggested solution to the problem.
dtjunkie07 said:
Another thing to try is to go into the windows folder then the start menu folder and just play around in there until it goes away...maybe delete the shortcuts in question and then recopy them back if they disappear from the start menu.
-Louis
Click to expand...
Click to collapse
Thanks dude that worked..!! I just cut/pasted the shortcuts to another folder and then pasted them back when it was working fine...
Oh and for me the problem occurred after installing touchflo and sclpc++
-dnash

Uninstalled SPB, taks menu is now gone...

Hi everybody.
Hopefully you all can help me out. I recently installed SPB pocket plus thinking I needed that for their Insight, but I now understand I don't. I went ahead and un-installed the pocket plus before i installed insight, and now the task option in the top right corner is gone on my Today screen. So I can't close programs individually or see whats running. Any ideas? Really don't want to restore a backup as I haven't done one since January. Thanks for any help! -Jeff
Punker1234 said:
Hi everybody.
Hopefully you all can help me out. I recently installed SPB pocket plus thinking I needed that for their Insight, but I now understand I don't. I went ahead and un-installed the pocket plus before i installed insight, and now the task option in the top right corner is gone on my Today screen. So I can't close programs individually or see whats running. Any ideas? Really don't want to restore a backup as I haven't done one since January. Thanks for any help! -Jeff
Click to expand...
Click to collapse
May have a solution for you but it may not be what you are looking for.
Here is quickmenu. Quickmenu basically sets your device similar to a PC's start menu. Once you install this cab you will find it under start>programs. After you click on the application you will notice a new start menu.
Possible solution: Start>click on quickmenu>option>X-button of screen:Long-press to close, short to minimize.
After you have this set up correcting, simply click start to view your open programs. Fairly simple I have been using this application since I received my Tilt and I wouldn't have it any other way.
Hope you enjoy it.
I installed a barebones ROM and found I really liked that task manager in the top right corner....
Do a search on this site for Task_Manager_2_0_30487_2.CAB, it is exactly what you are looking for AND has a couple of other features too.
The difference between this and Quickmenu is that this one doesn't have all the other stuff (although I use quickmenu)....
Hope this helps,
MBN
yea, I'm sort of looking just to get the original one back, I'm not sure what I should do. I guess if I don't have a solution I'll be forced to run a backup I did on sprite. Was hoping this was a common problem but i guess not
I had the same problem when I tried the demo out. After a little research on SPB's forums, it turns out that it is a known problem during uninstallation.
Unfortunately I don't have an answer for you on how to fix it. I was so PO'd that I went and hard reset the phone. I hope that SPB fixes the issue and I'd like to see how support is for WM6.1
Punker1234 said:
yea, I'm sort of looking just to get the original one back, I'm not sure what I should do. I guess if I don't have a solution I'll be forced to run a backup I did on sprite. Was hoping this was a common problem but i guess not
Click to expand...
Click to collapse
I'm tellin' ya, try the one I referenced above, it has just the corner app but where the original has a couple of options above the list of open apps, this offers three little buttons: Close All Open Apps|Settings|Memory %.
This takes up the same real estate the other one uses... give it a try, you won't be disappointed.
MBN
MustBNuts said:
I'm tellin' ya, try the one I referenced above, it has just the corner app but where the original has a couple of options above the list of open apps, this offers three little buttons: Close All Open Apps|Settings|Memory %.
This takes up the same real estate the other one uses... give it a try, you won't be disappointed.
MBN
Click to expand...
Click to collapse
I actually tried it, and I love. The only thing I don't understand is the functionally, all I can figure out as of right now that it shows memory usage,thats it. Anyway, thanks for the heads up! -Jeff
On Kaiser You can restore the today quick menu (in the upper corner): in the system settings find "X Button" icon - tap on it and there will be an option to turn it on/off. If its suddenly disappeared that can be becouse of something (e.g. 3rd application) turned it off. Thats happend in my case with SPB Pocket Plus on wm6.

TouchFLO 3D on Xperia

Hi guys.
I'm new to the Windows Mobile world and only got my Xperia X1 a couple of weeks back. I want to get the TouchFLO 3D interface on there.
However, I want to use CABs which allow me to switch to the TF3D interface and back out again to Xperia, rather than using a cooked rom.
I've looked around and at first it seemed fairly simple, but then the installation wouldn't work because the file didn't have certification security (or something like that).
I've seen articles saying you have to install older versions first, and almost all seem to point to cooked roms.
Does anybody know of a way to install the TF3D interface from a CAB file, and be able to switch in and out of it, like you can do with Spb Mobile Shell 3.0.1?
I have Spb Mobile Shell 3.0.1 and Spb Weather installed, but I really want the TF3D interface... the weather animations on it are absolutely amazing!
Any help will be very much appreciated. Thanks for your time.
Regards
Sonny
If you check out the stickies in this section, one of them is all about programs, panels and tweaks.
http://forum.xda-developers.com/showthread.php?t=441439
Going through it, there is a specific one about installing TF3D as a cab and then running it as a panel.
Wow! Thanks Zenith.
Just managed to install Touch-IT_Blackstone_Manila.cab and then TF3DPanelInstaller.CAB.
Works a charm. Exactly what I was after.
I'm now going to install Touch-IT_Blackstone_Manila_HD_FULL.cab and see how the applications work.
Thanks again for guiding me in the right direction, very much appreciated.
Regards
Sonny
give him the real deal....go to rom section..
Issues With Right Selection Button
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Sorted Button Issue
Hmm, after checking the button settings again, it turns out the Right Selection button was set to Today. Removed the selection... sorted.
sonnysoul said:
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Click to expand...
Click to collapse
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
himuraken said:
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
Click to expand...
Click to collapse
So this is to enable the right button to be assigned? Hmm.... kind of remember having that problem but somehow it was solved. Think with B2 of Daran's cab.
ManilaToday.dll Fixed The Issue!
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
sonnysoul said:
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
Click to expand...
Click to collapse
glad it work for you. i forgot to mention that credit goes to the person that provided this in the touch itJe v7 thread. not sure who it was so please forgive me.
Hi, it is my first post in a long time. Now I'm Xperia user.
I tried to download the today.dll but the link is gone. Additionally, my manila is not working: for some unexplained reason the program keeps trying to enter but did not succeed. It starts and then restart without opening.
Can somebody help me? I'm not inclined to try a Rom with manila for in that case I lose the "Ç" key and the letter recognition.
I use the Brazilian Sony Rom version from April 23, 2009.
Thanks, in advance!
Manila not working on Brazilian Xperia
Hi, this is my first post in a very long time. I tried to install this on my Xperia but got 2 errors:
1 - the right hard key problem and the file Today.dll is no more available at the said link
2 - the manila tries to start but does not enter. It keeps restarting but to no avail!
Please, some help is in order! I use brazilian Sony Rom and a cooked Rom is not na option since I would loose the hard "Ç" key and the on screen letter recognizer.
Also, I could not put the "Transcriber" to work.
Thanks
KMur

Categories

Resources