Hi there. I picked up an important call whilst in the shower. Very little water fell on my Kaiser but I belive that this caused the screen to stop working. Or I have dropped it as well.
Now I tried the business card remove dust particle trick. Didn't work. So I disabled cube / Touchflo. Then I reinstalled my ROM. Basically, I can't align the screen... I tried using the Remote Screen Alignment tool as well.
What's weird is that when you leave the phone for a couple of seconds, the battery conservation feature kicks, and when I touch the screen, the screen powers back up. So I know the screen works but just not properly.
Do I have to replace my screen (or just the TOUCH component of it)? I'm not too good with hardware but can I take it apart and fix the problems?
EDIT: For those facing similar problems, use the trial version of SOTI Pocket Controller to work on your Kaiser remotely.
I'm sure someone knows what to do... please help.
I had the exact same issues you were having, I had to send it in finally so I hope it is warrantied.
jallenclark said:
I had the exact same issues you were having, I had to send it in finally so I hope it is warrantied.
Click to expand...
Click to collapse
nope, its out of warranty. I'm thinking of using pocketpctechs or some other similar service. Any suggestions?
I would just order a new screen and replace it yourself.
jallenclark said:
I would just order a new screen and replace it yourself.
Click to expand...
Click to collapse
Did they replace the entire screen or jus the TOUCH component? I heard that the TOUCH surface is way cheaper.
Also, I'm not too sure how to replace it myself.
when my tilt was in warranty they just gave a new device but on the call they said the screen was dead even though it displayed and had minimal responce.
I could be wrong but I don't think it would be easy (if even possible) to replace just the touch surface of the screen.
Hi All,
The screen recently stopped working on my X1, so I sent it off for repair via my insurance company.
The phone is now back, and has been repaired. However, the keyboard seems to "double tap" everything. So if I press an 'n' it appears on the screen as 'nn'. It does this with a range of different keys/numbers and is starting to get VERY frustrating.
Do you think it's likely I'm just holding down the button too long? Is there a setting I can change this?
Or is the phone likely to need to go off for repair AGAIN?
Thanks!
keyboard problem
Even my key board is having the same problem. though i have not sent it for any repair. i noticed it after upgrading to official rom R3A.infact the space bar does not seem to be working. i thought it must be because of some dust inside. Do you think there is any chance of software related issue in this?
I just sent my phone in for this issue. Theyll send you a replacement device. Be aware though that if you are sending it to the repair center in the states and have an x1i theyll send you an x1a instead. Im currently facing this problem and am going to be speaking to the corporate office tomorrow
hi every one
does some one have an explanation about this issue ???
i replaced the screen one week ago and i was working so fine untill yesterday it started to do this
http://www.youtube.com/watch?v=DoAF3Ry-CsM
I would want to know this solution too.
It is the second display I replace on this phone and after a week this happens!
Whoahhhhhh pip a happy pill and have a nice trip hahahaha,no for reall thats just sad my guess is that this screen is defect aswell
I tried the old screens that have broken digitizer but the lcd still works.
Both work fine and do not show the problem in the screen, one of them had this problem before and now works fine, until I open the camera app, and then it starts to appear a little the problem.
The other screen, the original, does not seem to do the problem even when I open the camera app...
So the problem must be these cheap lcd's I bought.
But if I buy another one the problem may appear again right?
Napalm_PT said:
I tried the old screens that have broken digitizer but the lcd still works.
Both work fine and do not show the problem in the screen, one of them had this problem before and now works fine, until I open the camera app, and then it starts to appear a little the problem.
The other screen, the original, does not seem to do the problem even when I open the camera app...
So the problem must be these cheap lcd's I bought.
But if I buy another one the problem may appear again right?
Click to expand...
Click to collapse
I'm really lost !!!! But i agree with you Napalm_PT
We must get original lcd screen
And how to know that it's original ???
My phone's screen just went black suddenly while i was using the phone last night. Nothing i do will wake the screen up, i tried rebooting by holding the power button, tried power+volume down also to boot into recovery .. no response. However the phone seems to be functioning as i can hear the screen lock sound. I think im stuck on the pin screen (the one to pass the boot-up-encryption). theres some vibration and feedback when i randomly press on the screen too.
The device is running Stock 6.0.1 , unrooted , stock kernel. Has this ever happened to anyone else ? could it be a software issue ?
I believe the LCD panel just went dead ..
Thanks!
Have you hooked it up to a computer and tried to see if it's recognised by ADB?
moses992 said:
My phone's screen just went black suddenly while i was using the phone last night. Nothing i do will wake the screen up, i tried rebooting by holding the power button, tried power+volume down also to boot into recovery .. no response. However the phone seems to be functioning as i can hear the screen lock sound. I think im stuck on the pin screen (the one to pass the boot-up-encryption). theres some vibration and feedback when i randomly press on the screen too.
The device is running Stock 6.0.1 , unrooted , stock kernel. Has this ever happened to anyone else ? could it be a software issue ?
I believe the LCD panel just went dead ..
Thanks!
Click to expand...
Click to collapse
I had a nexus that had a faulty screen and randomly shut off or something half the screen will glitch out and one day it just stopped working but I could hear the lockscreen sounds. Your best bet would be to send it in for service maybe its a loose connecting or a hardware issue. When mine started acting up it was a loose connecting so if I hit the phone with my hand it would go back to normal and then it stopped working. Its a common issue if you do a google search many people have encountered this
That sounds to me like a return-under-warranty job. If you were in the UK you could quote the Sale of Goods Act, which specifies that an item must be of suitable quality and last a reasonable amount of time, but in my case when I returned my faulty N5 to Google after 18 months they were as good as gold, didn't quibble, simply replaced it with a refurbished one which appeared to me to be indistinguishable from brand new.
Since by definition your phone must be very close to its warranty period, depending on when you got it, I'd start with that. This is the link I used from the UK - maybe different if you're elsewhere, but you should find a link called "Get a call from a hardware specialist":
https://support.google.com/store/co...roid_help&cfnti=escalationflow.c2c&cft=5&rd=1
Didgeridoohan said:
Have you hooked it up to a computer and tried to see if it's recognised by ADB?
Click to expand...
Click to collapse
Havent done that yet. Only thing that would be good for is making sure its a hardware defect right ?
jazz995756 said:
I had a nexus that had a faulty screen and randomly shut off or something half the screen will glitch out and one day it just stopped working but I could hear the lockscreen sounds. Your best bet would be to send it in for service maybe its a loose connecting or a hardware issue. When mine started acting up it was a loose connecting so if I hit the phone with my hand it would go back to normal and then it stopped working. Its a common issue if you do a google search many people have encountered this
Click to expand...
Click to collapse
That makes sense. could be just a loose connector between the LCD panel and the MoBo ..
Problem is i live in Jordan and I got the phone from Dubai. Its still under warranty of the seller (Souq.com ; an online store .. kind of like Amazon of the middle east ), So i have to send my phone to Dubai to fix it. Now i could just go to a local phone repair shop and ask the guy to check the connectors, but im afraid that would void the warranty and not solve the problem ;( .
dahawthorne said:
That sounds to me like a return-under-warranty job. If you were in the UK you could quote the Sale of Goods Act, which specifies that an item must be of suitable quality and last a reasonable amount of time, but in my case when I returned my faulty N5 to Google after 18 months they were as good as gold, didn't quibble, simply replaced it with a refurbished one which appeared to me to be indistinguishable from brand new.
Since by definition your phone must be very close to its warranty period, depending on when you got it, I'd start with that. This is the link I used from the UK - maybe different if you're elsewhere, but you should find a link called "Get a call from a hardware specialist":
https://support.google.com/store/co...roid_help&cfnti=escalationflow.c2c&cft=5&rd=1
Click to expand...
Click to collapse
I submitted the form , although i live in Jordan which has no presence of Google whatsoever but what the heck !
thanks all for your suggestions.
Google is supposedly a global company...
Let us know how it goes, and good luck.
Well, if you figure out that it is just the screen, you can use this program for basic control with a lot of latency
http://forum.xda-developers.com/showthread.php?t=2786395
It's a little rough and confusing but, it's workable. If you need help setting it up feel free to shoot me a PM.
Whenever I try to use the rear camera the display turns black while only showing the HUD. The HUD works fine, but the camera doesn't work at all. Nothing is blocking it either.
When switching camera modes (to manual mode for example), an error pops up saying that the "camera is not available"
IMPORTANT NOTE: The front facing camera is working perfectly fine.
Things I tried to do (aside from shipping it for repair):
1. Android repair via the PC companion software
2. Internal reset
3. Safe mode
4. Clearing cache files for the built-in camera app
5. Installing an alternative camera app (the built-in one was disabled)
6. downgrade and upgrade
7.change camera for new one (tested)
I had same situation with regular Z3. Someone brings it to service where I'm working and my first think was camera fault but changing camera didn't fix it. Near camera connection You can see some small capacitors, we call it filters. It looks like capacitors but it's soldered not only on opposite sides but 2 points on both sides. In regular Z3 there was 5 elements like this to change and after that camera starts working. I don't remember how exactly it's made in Z3c but it's really possible that it's the same issue and same way to fix it.
One more thing, if You can check one one more camera to exclude camera itself cause most issues like this are caused by faulty camera. I had many phones (most Z1 and Z1c) with this issue and changing camera always was the solution.
Good luck.
Same Here. Need help too.
Sent from my D5803 using XDA Free mobile app
I have three cameras and two z3c, I interchange camera and phone and always the same result
At this moment I don't have any Z3c to disassembly (except mu own but under warranty) to check where those capacitors are but if You could take a picture of camera connector on motherboard and near area I can mark which one should change.
@Chamelleon
Main camera not working
I have the same issue with my Z3 compact. The issue started happening on the 11th month of my one year warranty, I sent it for repair (14 business days y + shipping time back and forth). It came back with the same issue. Sent it back right away. After another three weeks without my phone, I got it back. Guess what? EXACT SAME ISSUE!
I called their support line explaining what happened, the guy told me that there is nothing they can do about it since my warranty expired. Of course they didn't have in consideration that I sent my phone before it expired and it took about seven weeks back and forth. There wasn't any sort of damage on my phone, was never dropped or damaged in any way, I never submerged it even if in theory, that would be ok. The report said "it has reviewed the functioning of the unit, unfortunately the defect is in the PCB so it is not able to undergo repairs to it."
The guy on the phone told me what he thought the report meant. It means there is damage on the main board(not caused by me) and the one year warranty manufacturer warranty department won't repair it. Maybe, if I had bought the 2 year "extended" warranty, they could do something about it. I asked if the issue is that my one year warranty was expired or if it is something that they just don't fix unless you get the "extended" warranty. He couldn't answer me and the only thing he said was "is there anything else I can help you with?"
From what I understood, there are two completely different departments, the one year manufacturer warranty that only cover some things. Not even sure what, because if it's broken screen, water damage or any physical abuse, they won't fix it. If it's a problem with the main board or PCB, they won't fix it either. It is a mystery to me what gets fixed in that department. The other department is the 2 year extended warranty. I'm not sure what they are willing to fix there, but from what they guy on the phone told me, it's more than the one year regular warranty.
Long story short, after two trips to FedEx, at least 8 hours total on phone calls, more than 7 weeks without my phone, I ended where I started. Sorry Sony, never again. Worst customer support I have ever experienced.
At this photo I can see only 4 of this capacitors and marked it, maybe it should be four or one I missed cause quality. Anyway regular Z3 has 5 like this and after changing all 5 camera start working again. You can desolder it from most Sony phones, I used capacitors from MK16 (Xperia Pro). So find some Sony board with capacitors like this and ask someone with good hot air solder station (if You don't have one) to change it.
Any news to this problem? I bought used Z3C with black rear camera problem because it was cheap. (Yes, the front facing camera is working perfectly fine). So far I have only tried software fixes and obviously they didn't help. I ordered new camera module from ebay and I'm now waiting for it. Has anyone tried soldering new capacitors if the new camera module doesn't help?
EDIT: Here is another thead with same problem: http://forum.xda-developers.com/z3-compact/help/rear-camera-hardware-detected-black-t3231509
As I said I've done it only in regular Z3 but If You gonna try give me some info is this solution is also working in Z3c case.
Chamelleon said:
As I said I've done it only in regular Z3 but If You gonna try give me some info is this solution is also working in Z3c case.
Click to expand...
Click to collapse
I'm still waiting for new camera module. If the new module is not working I will try soldering new capacitors. I will keep you up to date here .
Any news??
Completely forgot to post this, hope it help someone. I made the same thing with black camera on my Z3c. After I broke audio port in my Z3c and had to send it to warranty I took my gf phone, Z3c also. I restored my TWRP backup to her phone and all except camera was working. Camera was completely black but only main, front was OK. After that I was afraid that it's another hardware problem like Yours but after reflashing to stock problem gone. I repeated it few times to check if I'm right and I was. After flashing backup from another phone even without TA and Kernel backup there is a problem with camera.
So I was wrong saying it's only hardware problem. If anyone still has this issue and didn't reflashed his phone check it first.
@Chamelleon yes it's somehow a software problem (if we could say that ). For me i did fix it.
I did a Nandroid backup for my black Z3 compact (camera works properly) an restored it on my new White Z3 compact (also camera woks fine). after restoring the white z3c rear camera shows black screen, the front one is good.
=> i did a format factory reset : didn't work.
=> flashed a TFT file : didn't work.
=> flashed a D5803_23.4.A.1.232_Customized FR.ftf : IT WORKS !
and then i remembered that my phone was from "SFR" , a french network provider.
i hope this helps also
Edit: too new account, would be nice if a mod unlocks the posting of the direct image links and fixes the links - I think they are useful as this is a common problem and i already invested hours translating russian and documenting my research nobody else should have to do it
for me it was a hardware problem after dropping it.. I even changed the camera module.
Did some reseach, russian sites have some input:
Layout1: directupload.net/file/d/4472/9andayji_jpg.htm
Layout2: directupload.net/file/d/4472/vzvgbqqo_jpg.htm
It was loose, but when i tried to push it down with a hot metal to "solder" it, at some point it jumped away and was lost because it is so tiny!
Missing part: directupload.net/file/d/4472/qmut35qt_jpg.htm
The russian site suggest this soldering of bridges, however its not clear to me if they mean one of this electronic pieces (4pins each) or also the lower one.
Russian: directupload.net/file/d/4472/ag43kmda_jpg.htm
The question is now how these (likely) filters (because so close to the camera have to be bridges, it seemed to have worked for some russians:
Pins: directupload.net/file/d/4472/k86j53hr_png.htm
Not sure if there are 4 indipendend pins or if for those small footprints of electronic devices they use only the edges and then they have the same signal.
I was not able to see any text written on those two things, however i didnt have any magnifying glass.
basmok said:
Edit: too new account, would be nice if a mod unlocks the posting of the direct image links and fixes the links - I think they are useful as this is a common problem and i already invested hours translating russian and documenting my research nobody else should have to do it
for me it was a hardware problem after dropping it.. I even changed the camera module.
Did some reseach, russian sites have some input:
Layout1: directupload.net/file/d/4472/9andayji_jpg.htm
Layout2: directupload.net/file/d/4472/vzvgbqqo_jpg.htm
It was loose, but when i tried to push it down with a hot metal to "solder" it, at some point it jumped away and was lost because it is so tiny!
Missing part: directupload.net/file/d/4472/qmut35qt_jpg.htm
The russian site suggest this soldering of bridges, however its not clear to me if they mean one of this electronic pieces (4pins each) or also the lower one.
Russian: directupload.net/file/d/4472/ag43kmda_jpg.htm
The question is now how these (likely) filters (because so close to the camera have to be bridges, it seemed to have worked for some russians:
Pins: directupload.net/file/d/4472/k86j53hr_png.htm
Not sure if there are 4 indipendend pins or if for those small footprints of electronic devices they use only the edges and then they have the same signal.
I was not able to see any text written on those two things, however i didnt have any magnifying glass.
Click to expand...
Click to collapse
So I changed my camera because I thought it was a hardware failure (tried every other method before: going back to stock, wiping camera files etc.) and it STILL is black. Did you have any success with your camera?
mrfrantastic said:
So I changed my camera because I thought it was a hardware failure (tried every other method before: going back to stock, wiping camera files etc.) and it STILL is black. Did you have any success with your camera?
Click to expand...
Click to collapse
Try flashing stock ROM based on your country as i mentioned up.
mrfrantastic said:
So I changed my camera because I thought it was a hardware failure (tried every other method before: going back to stock, wiping camera files etc.) and it STILL is black. Did you have any success with your camera?
Click to expand...
Click to collapse
Me not (also changed the HW cam), the guys on the russian site yes (even with other similar sony).
Just check if there is something loose, maybe you are lucky and its a software problem *fingers crossed*. To me it happend exactly after dropping (and changing the screen which went without problems) so I was quite sure its HW based.
basmok said:
Me not (also changed the HW cam), the guys on the russian site yes (even with other similar sony).
Just check if there is something loose, maybe you are lucky and its a software problem *fingers crossed*. To me it happend exactly after dropping (and changing the screen which went without problems) so I was quite sure its HW based.
Click to expand...
Click to collapse
Hi basmok,
First off thanks for the research and for the pictures!
I have a similar story, phone was dropped, rear camera won't work, tried different ROMs without any luck then took phone apart and saw that one of the four tiny capacitors
just fell off and now it's MIA...
The last pic from your post (directupload.net/file/d/4472/k86j53hr_png.htm) which I assume shows the soldering of the bridge doesn't seem to work...
Do you still have that pic?
Also did you make any progress on the camera fix or gave up?
Thanks,
Ati
AtiGala said:
Hi basmok,
Do you still have that pic?
Also did you make any progress on the camera fix or gave up?
Thanks,
Ati
Click to expand...
Click to collapse
You were lucky, they were already in the recycle bin and deleted on the camera. Best I could do picturewise, i dont have a macro lens. Here we go, added all to imgurl so hopefully they survive longer: http://imgur.com/a/Of1DY
And no, didnt make any progress as i dont know what component they are. Normally all components have lasered some code but not sure if its just too tiny for my eyes or if they dont have it. I was a bit unlucky as i didnt have a soldering tool, so i tried it by pushing the pin down with a paperclip which i headed with a lighter --- well it jumped away and was not the best approach