Hello,
I have a very annoying problem. When I start my phone and have to enter my pin-code, a pop-up comes right up saying he's trying to connect to 3G. That pop-up blocks my screen, so I can't enter a number. As soon as I click ignore, the pop-up comes again, so on, so on...
When I finally manage to get the phone to start up, the pop-up is gone. But as soon as is loses network, it starts popping up. When I hit ignore, it pops up again and again.
It's very annoying, so isn't there an option to manually connect to 3G, so that as soon as the phone is on, I can connect to 3G, so that I don't need 3 minutes to enter my pin-code...
thanks very much, this would save me a lot of time and stress
if you dont use 3G you can turn it off in the comms menu
livefastdiefun87 said:
if you dont use 3G you can turn it off in the comms menu
Click to expand...
Click to collapse
I know, but I do use it, I just want to activate it manually, so I don't get the pop-up....
Hi - this is my first post. If the popup message that's appearing is the one I think it is, then you can turn it off - without losing 3G access - by doing the following:
Select <Start> then <Settings> then the <Sounds & Notifications> icon..
Click on the <Notifications> tab then choose <Connection Established> from the <Event> picklist - you should see that the <Display message on screen> selection is ticked.... then untick this and <OK> then no more annoying popups.
for your first post, that is a great one thanks mate
EDIT: doens't work I need the same thing for "establishing connnection" or something, because then it pops-up, and that I can't find in the event list... but thanks anyway!
nobody else has an idea????
Related
There seems to be a problem with the Kaiser. After finishing a phone call on the Kaiser the backlight goes off and stays off and I cannot access the Start menu. I can access all other functions but backlight stays off and one still cant get into the Start menu from anywhere on the screen. I have to press the power off button quickly once and then wait a second, press it again to be able to access the start button or the light to come on. This is definitely a bug in the tytn II and I hope HTC is doing something about this.
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
sudo009 said:
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
Click to expand...
Click to collapse
I noticed this as well...
pretty crazy.
Hmm I haven't that problem. Danish HTC TyTN II
Do you folks have the password set? I have heard that that can cause this problem. Try to turn off password checking.
Hi @ All, any news about that problem?
I have a solution
I had the same problems and after installing all the ROM's and still have the same problems, I found out that the problem is not in the ROM it is in the 3G network, disable the 3G network and set it to GSM and all the problems will disappear.
This was nothing to do with 3g.
It was a pre-programmed fast sleep setting that was flawed. Download Kaiser Tweak and turn off all the sleep during call options.
Difference in memory in use
I have problem with my TyTN II, I don´t know why, but when I control the state of the memory in use, it seems to be 112 MB in use and 19,4 MB free. But when I control every item (Applicationdata, Confimgr, ProgramFiles etc., even including hidden files) and calculate total then it seems to be only 45 MB in use. Can anyone explain this
thanks
Hey guys, only got the tytn 2 a few days ago..and its all new to me...got a few questions..
1. When im in a call, the screen always turns off, or goes to standby, only way to get it active again is to press the power button on the side once...is there a way to stop it doing this so i only need to tap the screen to get it again?
2. I transfered my contacts using the SIM...but in contacts it only shows the mobile number, where as on my old N73 it showed the mob/house number etc all under the 1 name....for some of them it shows it under Sim Manager, but for others no. Is there a way to get it to have all the numbers under 1 name, and when i click a contact to call, it asks me which of the numbers to call, or at least lets me pick first?
3. What is the best browser to use? IE doesnt seem very good.
4. What is a soft and hard reset, and how do you do them?
5. Every time i turn the phone on, it brings up a message from network wizard saying my network is not know or something...how can i get rid of it?
Thanks
aldolino said:
Hey guys, only got the tytn 2 a few days ago..and its all new to me...got a few questions..
1. When im in a call, the screen always turns off, or goes to standby, only way to get it active again is to press the power button on the side once...is there a way to stop it doing this so i only need to tap the screen to get it again?
2. I transfered my contacts using the SIM...but in contacts it only shows the mobile number, where as on my old N73 it showed the mob/house number etc all under the 1 name....for some of them it shows it under Sim Manager, but for others no. Is there a way to get it to have all the numbers under 1 name, and when i click a contact to call, it asks me which of the numbers to call, or at least lets me pick first?
3. What is the best browser to use? IE doesnt seem very good.
4. What is a soft and hard reset, and how do you do them?
5. Every time i turn the phone on, it brings up a message from network wizard saying my network is not know or something...how can i get rid of it?
Thanks
Click to expand...
Click to collapse
I have one answer to all your questions buddy! And the answer is: SEARCH
Seriously, your questions have all been asked and answered several times before. A simple search of the forum will yield answers. You'll also find lots of other good information about your phone.
Try reading the manual that came with your phone. It will answer all of your questions.
Why are people so lazy?
aldolino said:
Hey guys, only got the tytn 2 a few days ago..and its all new to me...got a few questions..
1. When im in a call, the screen always turns off, or goes to standby, only way to get it active again is to press the power button on the side once...is there a way to stop it doing this so i only need to tap the screen to get it again?
2. I transfered my contacts using the SIM...but in contacts it only shows the mobile number, where as on my old N73 it showed the mob/house number etc all under the 1 name....for some of them it shows it under Sim Manager, but for others no. Is there a way to get it to have all the numbers under 1 name, and when i click a contact to call, it asks me which of the numbers to call, or at least lets me pick first?
3. What is the best browser to use? IE doesnt seem very good.
4. What is a soft and hard reset, and how do you do them?
5. Every time i turn the phone on, it brings up a message from network wizard saying my network is not know or something...how can i get rid of it?
Thanks
Click to expand...
Click to collapse
hi aldolino,
1. there is a tweak or registry hack to disable the screen goes to sleep and off, you can find it in TWEAKS thread
2. you might want to synch from your N73 to your outlook on your computer before synchronizing it back to your TYTN II
3. not so sure about the best, but i know IE ain't good enough, hence i use Opera browser 8.65 which does the job well enough
4. soft reset is you when you poke your stylus under a little hole beneath your screen, manual says so, whilst hard reset you can do it via setting
5. you can actually disable auto network configuration, start-setting-connections-connection setup
Hi,
perhaps there's a very simple answer to my question. After booting my DIAMOND, there's the original dialpad for a very short time. I couldn't enter the pin. Then it shows "network unreachable". Ok, without Pin, it's ok. But why i can't enter my pin after booting?
CU, dc7os
im not sure if the problem i have is related, but about 50% of the time when i reboot the phone it goes to windows home screen without asking for a PIN.
It does not load TF3D its just a plane black today screen with calander at the bottom.
If i go comm manager and turn off then on "phone" or "airplane mode" this forces the device to ask for the PIN
after successful PIN entry the phone works as normal!!! bizzare
This has happened with every ROM i have tried so i can only assume its a problem with my device or the 3rd party software i introduce to it after i flash the ROM.
rumpleforeskin said:
im not sure if the problem i have is related, but about 50% of the time when i reboot the phone it goes to windows home screen without asking for a PIN.
It does not load TF3D its just a plane black today screen with calander at the bottom.
If i go comm manager and turn off then on "phone" or "airplane mode" this forces the device to ask for the PIN
after successful PIN entry the phone works as normal!!! bizzare
This has happened with every ROM i have tried so i can only assume its a problem with my device or the 3rd party software i introduce to it after i flash the ROM.
Click to expand...
Click to collapse
I have this too. But I just press the "Phone call" hardware button and then the screen where you can enter the PIN appears.
ZuinigeRijder said:
I have this too. But I just press the "Phone call" hardware button and then the screen where you can enter the PIN appears.
Click to expand...
Click to collapse
Ok, that works, but my question is: why it shows the screen "Enter pin" and i can't entering it?
CU, dc7os
Giuys
Now this is weird and I tried turning off phone and on again but to no avail. I updated to the latest firmware (over the air) for my Xperia Z and I noticed some weird behaviour ... 1 Google + is now crashing 2 Some times upon pressing the power button the backlight of the display comes on but the mobile does not and I would have to turn it off again and back on to get it on. And now the latest surprise is ..... I CANNOT go past my lock screen . I am inserting the correct pin ,,,, the one I usually use and now I am desperate because I DONT want to lose the data that's in it. I know I can re-flash the mobile and resolve the issue but I have some photos which I really wish to keep as they have emotional value. So I want to avoid the route of doing a hard reset yet.
Thing is after I inserted the pincode and its saying its wrong for a number of times ... I expected the forgot password button to turn up on the lock screen but it is not ... Could anyone kindly explain to m e how to get this forgot password to come up on my numeric lock screen ? Everything is stock and the phone has wifi and 3g set to off ....
Please help !! I don't want to lose what's in my mobile.
Kind Regards
Al
Alcatrazx said:
Giuys
Now this is weird and I tried turning off phone and on again but to no avail. I updated to the latest firmware (over the air) for my Xperia Z and I noticed some weird behaviour ... 1 Google + is now crashing 2 Some times upon pressing the power button the backlight of the display comes on but the mobile does not and I would have to turn it off again and back on to get it on. And now the latest surprise is ..... I CANNOT go past my lock screen . I am inserting the correct pin ,,,, the one I usually use and now I am desperate because I DONT want to lose the data that's in it. I know I can re-flash the mobile and resolve the issue but I have some photos which I really wish to keep as they have emotional value. So I want to avoid the route of doing a hard reset yet.
Thing is after I inserted the pincode and its saying its wrong for a number of times ... I expected the forgot password button to turn up on the lock screen but it is not ... Could anyone kindly explain to m e how to get this forgot password to come up on my numeric lock screen ? Everything is stock and the phone has wifi and 3g set to off ....
Please help !! I don't want to lose what's in my mobile.
Kind Regards
Al
Click to expand...
Click to collapse
Are you able to tap on "emergency call" on the lockscreen? If yes, go ahead and tap it. It should open up the dialpad then type in *#*#7378423#*#* . It should open up the service menu. At the service menu, navigate to "service tests" ---> "NFC" and let the test run. Once the test compleates, go ahead and tap the "home" button. You should see you homescreen.
Hope it helps
Regards.
xsyber2000 said:
Are you able to tap on "emergency call" on the lockscreen? If yes, go ahead and tap it. It should open up the dialpad then type in *#*#7378423#*#* . It should open up the service menu. At the service menu, navigate to "service tests" ---> "NFC" and let the test run. Once the test compleates, go ahead and tap the "home" button. You should see you homescreen.
Hope it helps
Regards.
Click to expand...
Click to collapse
Tried to test it for myself without having problems with my pin lockscreen. But this doesn't work. A window pops up and tells me that this is not an emergency number.
Sent from my Xperia Z using XDA Premium 4 mobile app.
Dreiundachzig said:
Tried to test it for myself without having problems with my pin lockscreen. But this doesn't work. A window pops up and tells me that this is not an emergency number.
Sent from my Xperia Z using XDA Premium 4 mobile app.
Click to expand...
Click to collapse
If that fails as well, i think its better to contact Sony Customer Service and check if they could help but to be honest with you, high chances are there that they will advice you to perform a hard reset. Sorry dude :/
Hey guys,
I have a Note 8 running on Android 9 for 4 years and I have been using the phone just fine until this morning when I woke up and noticed the phone having nothing on the main screen but a message (in native language, temporary translated as "Phone is booting/starting..."). I thought it was my child messing something up so I left it alone and 2 hours later it still displayed the same message. When I clicked on the Bixbly button, it said that the function was unable in Emergency mode. I also tried restarting, force restarting and restarting in Download mode, but nothing works. The volume button, navigation bar are still working properly; I can still access settings via navigation bar, and I can answer phone calls though I could not make phone calls with it.
Any suggestions on fixing this issue?
sakibaraki said:
Hey guys,
I have a Note 8 running on Android 9 for 4 years and I have been using the phone just fine until this morning when I woke up and noticed the phone having nothing on the main screen but a message (in native language, temporary translated as "Phone is booting/starting..."). I thought it was my child messing something up so I left it alone and 2 hours later it still displayed the same message. When I clicked on the Bixbly button, it said that the function was unable in Emergency mode. I also tried restarting, force restarting and restarting in Download mode, but nothing works. The volume button, navigation bar are still working properly; I can still access settings via navigation bar, and I can answer phone calls though I could not make phone calls with it.
Any suggestions on fixing this issue?
Click to expand...
Click to collapse
From sammobile - To turn off the Emergency mode, just tap on the overflow menu (the three-dot icon) in the top right corner and tap on the relevant option. You can also manage your emergency contacts by tapping the Manage emergency contacts option in the overflow menu.
ultramag69 said:
From sammobile - To turn off the Emergency mode, just tap on the overflow menu (the three-dot icon) in the top right corner and tap on the relevant option. You can also manage your emergency contacts by tapping the Manage emergency contacts option in the overflow menu.
Click to expand...
Click to collapse
Hey ultramaq69,
Thanks for your response. Though the suggestion sounds very general, I found out how to turn it off via power option menu, and it is now working properly again, thanks!