touchscreen problem when keyboard is out - Tilt, TyTN II, MDA Vario III General

Hi all,
Just wondering if anyone else has had a similar problem. And if they have any solutions to it.
Touchscreen works fine when the keyboard is shut but open the keyboard and the touchscreen doesnt work.
I actually had a problem where all the buttons etc stopped responding about a week ago, reset(hard) the phone and all back to normal except for this problem.
Thank god for exchange server. Downloaded all the emails/contacts/etc in about 5 mins.
Thanks

a liitle more info would b nic ..
cocked or stock rom...
installed a diff. touch keyboard?
etc.

don't know why u would wana use touch keybrd when the reg keyboard is out .. but a little bit more info about device would b nice e.g
cooked or stock rom
installation of new touch keyboard etc.

well it was doing it on a stock vodafone uk rom after the reset. So decided to try a cooked rom a day or so later. Wow soo much better with the new rom, but still the touchscreen not working when the keyboard is out.
so just to make things clear.
i. phone keypad, buttons & touchscreen not responding after 5 mins after bootup.
ii. hard reset. phone back to normal with stock vodafone rom
iii. knowtice touchscreen not working when keyboard out. decided to try newer roms. using L26 WM6.1 PROV4 (3.51.502.0 WWE) Multimedia

its not a touchscreen keyboard, its hitting the buttons on the screen, eg windows icon top left, or the send after typing a txt msg with the hardware keyboard.

Related

[HELP]Need Soft-Keyboard cab-file

Hi,
I have a big problem...
I tried to install this keyboard from TD2 I think:
http://forum.xda-developers.com/showthread.php?t=485179
Everything were fine but since I wanted to use my hardware keyboard there were so many bugs: instead of point ["."] it makes a delete and some more bugs.
But they doesn't matter, cause I think that I want the original keyboard back =)
So, I uninstalled it but then the shock.
Everytime I want to use my softkeyboard it shows me a message that there was a mistake with "device.exe" and it pops up every time until I make a soft reset...but my hardware keyboard worked then ^^.
So I need the .cab grom the original TP keyboard to install it again.
Thanks
Greetings
Chris
Btw: I have the Germany TP, so I need a german softkeyboard ^^
Please help me.
Someone must have a the original Touch Pro soft keyboard CAB-File...
I heard that you have to hard reset. I had to resort to that.
Yeah,
I did a hard reset a few houres ago :\
This sucks...
@everyone with HTC Touch Pro from Germany, do not install this app...only if you don't want to use your hard keyboard again
PS: It could also be that this error is just on my device...^^

Keyboard error, always reverts to symbols

I have a Hong Kong purchased Xperia. I have flashed my HTC phones over the years 100’s of times. I always perform a hard reset after. I now have very frustrating problem. I was using Jacks medium 3 for a while, then Touch-IT v10 - Build 21051.1.6.4.
The problem arose when the Keyboard would always revert to symbols when using touch keyboard. I would then change it back to keyboard function. As soon as I touch the keyboard with my fingers it automatically changes to symbols. If I change it to keyboard and tap the screen it I can write a message, but as soon as I slide out the keyboard or touch any keyboard keys it goes back to symbols entry. I hard reset it again, same problem. I then installed Jack 3.4 full, same problem now on 3 ROMS, please advise.
Rom version Jack V3.x WWE
ROM date 03/04/09
Radio version 1.14.25.25
Protocol version 52.65.25.34U
ExtPkg version Fail_Pkg_OpenPackageB
Can someone PLEASE reply?
I am desperate, please help...
update to your latest available Stock ROM http://forum.xda-developers.com/showthread.php?t=475482 and Check the Issue.....
Sounds like a hw issue.
Any case your [Sym] button is broken (permanently pressed) ?
Maby, it would be a good idea to restore stock ROM/SPL and send it to SE for repair.

Screen mis-aligns mid application

Hi,
I seem to have developed a bit of a problem with HTC Diamond screen alignment...
I align the screen fine, it works for hours, days, minutes so various times of use.
I then use messaging, internet, Space Trader (my fave game) and all of a sudden, the stylus taps start to move off target. If I try to scroll up using the scroll bars, I end up highlighting text or tapping the wrong buttons.
I realign again and its fine...
Stock ROM at 1.93 recently upgraded from 1.37 as I thought the ROM update might fix but no...
Any ideas?
Rich
many have faced the problem but solution as of yet.
some say the prob is with the digitizer n needs to be replaced while if its a software prob then i guess the rom has missed biotouch.exe file i guess..
problem is with display, for some strange reason it start not responding, i have to change display in repair centre, for same reason...
Try first with mtty tool to format rom, and upgrade to 2.03 version stock rom, and see wha will happen, if continue, better send phone in repair centre, if it's in warranty...
Sometimes problem is with hardware like my with display, sometimes is problem software... It's randomly...

touch screen does not work at all

Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.
What you need to do is fully charge the phone, run a backup usin PPM or sprite then do a soft reset and leave it for a day, if that doesnt workt hen run a hard reset and it will fix it, been through that problem too a couple times and it ends up workin fine
Thank you
Thanks a lot. but please tell me when you say to leave it for a day i should leave it with baterry in or out. Or do you mean to do the soft reset and leave it for a day to the screen where it sais to tap the screen. And by a day you mean 24h?Thanks again anyway
Ok.But where can i find a new lcd? And how much is it one?
I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
i flash the ori rom n change lcd n ribbon but still cant do the alignment on touch screen n get into the menu try the board n put it in another p4550 still cant touch screen,is it board problem ?
i have the same problem
i think its a hard problem i try everything but nothing
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
I had prob woth touch screen and non functional front camera. Restored function by replacing flex cable. This flex cable has the buttons for the keypad as well as supporting the front camera. When I examined the flex cable, the portion that moves in and out when sliding the keyboard appears to be slightly damaged on right and left sides. The damaged portion does contain very thin circuits.
Not sure why this was posted in Accessories but I'll move it to General for you.

Help with on-screen keyboard

I recently installed sense 2.1 on my TP and for about a day or two,the on-sceen keyboard is stuck in the MF Compact way...When I go to settings and I select the Full Qwerty keyboard, is stays the same.F**k it...
Do I have to perform a hard reset ? Cause if this is the case, I won't do it,cause reinstalling everything all over again takes time...
Ultrasone said:
I recently installed sense 2.1 on my TP and for about a day or two,the on-sceen keyboard is stuck in the MF Compact way...When I go to settings and I select the Full Qwerty keyboard, is stays the same.F**k it...
Do I have to perform a hard reset ? Cause if this is the case, I won't do it,cause reinstalling everything all over again takes time...
Click to expand...
Click to collapse
When you see the keyboard icon in an app on the lower center part of the screen, click on it and hold. Eventually a keyboard picker will show up.
Drove me up the wall too. Seems to change it at random.
Thx ... i know about the keyboard picker.in my case it wouldn't pop-out. Stupid ...I noticed yesterday that it is showing the full qwerty keyboard...seems to have a mind of its own
Hey I too have the same problem on my HTC
The changes are not saved.

Categories

Resources