When I try accesing a webpage on my tilt, it looks like its loading, then it shows 0kb at the bottom, and just displays a blank page. The wierd thing is that it works in any other program (skyfire, operamini, seven(email)), and it works when I am connected to wifi, I've tried flashing two different roms, including the original AT&T. I have 2-3 bars on 3g coverege, but it does it everywhere.
It started like a month ago, and a soft reset would ussually fix the problem..(now it doesnt)
I would really appreciate any feedback...
Have you tried to disable the PIE proxy either with the cab file or the registry?
PsyOpWarlord said:
Have you tried to disable the PIE proxy either with the cab file or the registry?
Click to expand...
Click to collapse
It was the proxy... I when I flashed back to the original rom, and removed the proxy in "proxy manager" it started working, so I just copied the cab file to use on dutty's... and its working great.
thanks..
kind of off-topic, but I have a att spash creen now even in the dutty rom, i had "smart mobility" before, how can I change that?
You can start here for information on the splash screen:
http://forum.xda-developers.com/showthread.php?t=338779&highlight=splash+screen
http://forum.xda-developers.com/showthread.php?t=336174
http://wm5.mobi/wall/anim.html
driving me nuts too!!!
pcharouz said:
When I try accesing a webpage on my tilt, it looks like its loading, then it shows 0kb at the bottom, and just displays a blank page. The wierd thing is that it works in any other program (skyfire, operamini, seven(email)), and it works when I am connected to wifi, I've tried flashing two different roms, including the original AT&T. I have 2-3 bars on 3g coverege, but it does it everywhere.
It started like a month ago, and a soft reset would ussually fix the problem..(now it doesnt)
I would really appreciate any feedback...
Click to expand...
Click to collapse
I am dealing with the same problem. My GF and I both have Tilts. Hers runs 6.0 ATT newest ROM and I run Dutty 6.1 with the new PIE.
Anyway, I have found that if you go into your GPRS settings and edit your proxy settings (you don't actually need to change anything) and hit next till you're done. It will then say something about needing to reconnect or something when you're done.
After that, PIE will work without a reboot or anything. It seems to happen every few days for her and less for me. Definitely has something to do with AT&T's proxy and it's maddening. AT&T has not been helpful either...
at least it's a work around.
Try completely removing the proxy, also, I think me calling ATT and having them remove the internet package, and put it back on had something to do with it...
Related
Hey guys.
ive made a simple patch for the blue angel running windows mobile 5 where we got the error connection loss after loading any more than 200kb.
The patch I have made sorts this problem and one page for example that I now know that loads and didnt used to is Ebay, and buzzdev.
Simply insert this into the registry of the blueangel,, only for Windows Mobile 5.0.
U MUST let the registry flush before reseting the device. To do this press the power button to turn device off, wait 15 secs, turn back on and then soft reset.
Cheers.
s1nn0n
I have updated this, still seemed to throw up the error with v1.0, v1.1 seems fine 100% of the time.
OK, I feel like a bloody moron and a total newbie here! I have tried importing the regfile with PHM Registry Editor, but I can't seem to do it. Could you please tell me what you use?
1.1b is now up.
cache has been increased.
ill make a cab later to make it easier. this works fine for me now even over some pages tht still didnt quite seem to load fully in 1.1
Great, thanks! Maybe I can install it as well then... I was actually wondering why eBay wouldn't load while I was looking for some stuff in bed last night, but this explains it. Does this help on the pitiful speed of loading the pages as well? I don't think eBay and IMDB were that slow to load on the WM2003SE I used before. Or were they?
speed doesnt seem to bad to be honest. id say its equally comparable to 2003se.
ill get tht cab made up now.
ok here it is,
the cab as promised.
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Hmm... weird... first time I installed WM5: I had nooooooooo problmes using PIE with WiFi and "big" sites. Now, on my 2nd try with WM5 I have those problems.
I'll try the patch later and write down what's going on.
Heres another patch which is slightly updated, v1.2. It has the following changes:
1. Makes pages load faster having more connections per server.
2. The timeout time has been increased so that the page will load for longer and wait for the page to fully load before displaying the connection lost error.
3. Cache of ssl pages has been disabled.
Mastiff said:
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Click to expand...
Click to collapse
Mastiff: Please use the latest version and tell me how u get on...
I don't have that problem
I use the first patched version how about you?
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
s1nn0n said:
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
Click to expand...
Click to collapse
That's the crazy thing: first time I installed WM5 on my PH20B1 BA, I had no problems with eBay and other much bigger sites... then I went back because of the performance to WM2003SE, had there the phone problem and several others, so I switched again to WM5 and NOW I have those problems with the PIE... First time I had the v1 WM5 and now the "v3" - that's the only difference. However, I'll try out that patch.
Mastiff said:
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
Click to expand...
Click to collapse
Just loaded ebay.com with the craddle connection and didn't have any problem.. I used WiFi with other sites and never saw that problem... Tomorrow i can try loading it at a wifi connection
OK, I just tested. eBay works with the cradle, but not with WiFi.
I tested it over wifi and works fine.
No patch applied (only the 1st patched rom version)
I still can't see the buttons.. I guess we need the Hima's IE Registry
I have those problems w/ PIE since i have the patch 3 version from WM5, with the very first version i had no problems concering PIE and Wifi...
I'm starting to think that the problem is WiFi itself, not just surfing via WiFi: http://forum.xda-developers.com/viewtopic.php?t=29904
i new to this whole pocket pc thing, and i found this site and started upgrading my t-mobile mda. first i upgraded the rom to the k-jam upgrade and everything worked fine. then i started messing with the registry with registry wizard. that was fine also. but as soon as i hit the edge icon tweak, i can no longer connect to gprs. i get a msg saying
"Cannot connect. make sure your phone is turned on, or tap settings to check your connection settings. "
can anyone help me. i didnt alter the settings from when it was working so im unsure of what the problem is. any help is greatly appreciated
sounds like ou ahve been doing a fair amount of tweaking. Even in the registry. Are you sure it was the Edge icon tweak that did it as my Cingular 8125 is running 2.16.9.1WWE and I have made that change and mine works fine. My wonder is if one of the previous changes didn't take affect until a reload or a new program load, and that is what actually caused the problem. I loaded some cingular cabs yesterday and it broke activesync.
ethorn said:
sounds like ou ahve been doing a fair amount of tweaking. Even in the registry. Are you sure it was the Edge icon tweak that did it as my Cingular 8125 is running 2.16.9.1WWE and I have made that change and mine works fine. My wonder is if one of the previous changes didn't take affect until a reload or a new program load, and that is what actually caused the problem. I loaded some cingular cabs yesterday and it broke activesync.
Click to expand...
Click to collapse
yah i know. but even after i restored my original registry settings i still cannot connect. when i try to connect, the window that shows gprs is trying to connect flashes 2x then it reads the msg i posted. any ideas
none here... I hope someone else can help, or you can hard reset and try to do the changes slowly soft reset a couple of times after each change until you figure out which one cased it. Each change including installed programs.
Sorry
mine does the same thing and I have been able to get it to connect without reset. Tap your signal bar on screen and turn on flight mode than turn off it will reset connections. It happens after every sync or charge for me and once we are able to unlock the cid and install the cing ext rom it might go away.
i actually just got rid of the program and it works now
ok peeps i upgraded my BA with this rom.
Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek
everything went without a hitch except i cant use internet explorer it opens but as soon as i try to navigate to a page even just google it shuts down.
any suggestions as to what is wrong? i tryed the search funtion and couldnt find what i was looking for
Have you correctly configured teh gprs or wifi settings?
have you tried opera browser?
I use both on my BA, also with the same rom as yours.
What i can see, is that you have one older radio, so, try to upgrade the radio.
Tried making Hard Reset?
Uziel said:
ok peeps i upgraded my BA with this rom.
Helmi_BA_WM2k5_AKU3.5_v1.4.CF2 R2 by baniaczek
everything went without a hitch except i cant use internet explorer it opens but as soon as i try to navigate to a page even just google it shuts down.
any suggestions as to what is wrong? i tryed the search funtion and couldnt find what i was looking for
Click to expand...
Click to collapse
I occasionally get this. Usually it happens when the network stack is messed up and can't get out anywhere, even though I'm connected to the house wireless.
Soft reset takes care of it. Occasionally, it takes a few of them, but it does clear the issue.
yeah updated radio to 1.15, tryed the hard rest.
think ill do a fresh instal with the Um.......? vanilla one unless someone has another one to try. recomend?
i do...
if you read through the thread of that rom, you will notice, that for some people (like me too), these problem occured...thats why baniaczek added an wifi driver update, and an other working in logout roms...one of them should work...and then your pocket ie won't be spoiled...
files listed here: http://forum.xda-developers.com/forumdisplay.php?f=273#
you should grab the Baniaczek_R2_Network_update.cab
and the tiacxwln_logout.cab
cheers
Hi all, I got the ATT Tilt, and unlocked it, am overseas right now, i donwloaded opera mini over a wifi connection when i was home, now i am able to access the internet using opera mini (which is how i am posting now), but PIE remains stuck on "loading". Because of this, I am unable to download anything. What can I do to fix this.
Edit: Got it working, I had to hard reset and let the AT&T customizations install since the proxy option in the programs menu isn't there without the customoizations, then in Programs > Tools > Proxy Manager (I think), there is an option to remove Proxy, I tried it and it worked, then I went hunting in the windows folder and found a file called removeHiddenProxy4cws....cab, copied it to the storage card and then hard reset again and canceled the customizations, tried IE again, didn't work. I then executed the aforementioned cab file and tried PIE again, and it worked. Also of note is that the cab file is there even if the customizations aren't installed, so if your PIE is not working (note, it is not working, some people have lag problems which is a different issue), all you gotta do is execute the file and the proxy setting for PIE will be disabled.
gamefreakgcb said:
Hi all, I got the ATT Tilt, and unlocked it, am overseas right now, i donwloaded opera mini over a wifi connection when i was home, now i am able to access the internet using opera mini (which is how i am posting now), but PIE remains stuck on "loading". Because of this, I am unable to download anything. What can I do to fix this.
Click to expand...
Click to collapse
I'm not sure if I had the same problem, but when I first got my Kaiser, I tweaked it like hell... and one of the tweaks was to set PIE cache to Stroage Card, and since I did it, PIE stoped working... in fact the whole device hangs and I had to soft reset...
anyway.. I changed the cache to the default, and everything works OK now...
I hope this could help
cheers
I had a similar issue when I first got my tilt as well. Not sure if this helps, but I had to run the little disable hidden proxy program which should be in programs/tools/proxy or something like that
You might have a look at this:
http://forum.xda-developers.com/showthread.php?t=337521
I noticed that on large websites (ebay, forums, etc) that PIE would stop about half way and freeze up causing me to have to soft reset. I started using the new DLL that I just pointed you to and PIE is fine now.
Problem solved, Check first post
Bump for problem solution.
Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.
I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.
ok
What are your connections settings, are you on medianet?
liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.
gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?
still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..
Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt
yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.
thanks!!
lol it did fix it..thanks
liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.
ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?