Database Develop

Not able to use my QTEK 9100 after upgrade

Hi ,
I have just upgraded my ROM to CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US on my QTEK9100 . The upgrade went perfectly fine for 10 min and it even copied all the cab files . But after the hard reset , my radio does not seem to work and the battery indicator displays status as unknown. When I click on start , it take long time to pop-up . Not sure what could be problem. I upgraded the ROM with CID-Unlocker option as NO . Also the active sync does not seem to work anymore now if I want to roll bak to the original ROM. Can I get some help to get my QTEK back in workig state somehow pl ? Any help is highly appreciated. Pl. let me know in detailed steps to get this thing up and running . I am using T-Mobile SIM with a plan and i am in UK.
Thanks a lot.
Superlifer

Not able to use my QTEK9100
Hi Guys,
Now my unit keeps on rebooting on itself with T-Mobile startup screen. I tried holding the camera and the recoder button while resetting, but doesn't seem to work. I am worried that my gadget might be completely unusable. Can anybody assit please asap ?
Thanks once again ..

HTC phone will no longer allow a software update.

Since I upgraded to "PDAMobiz_Wizard_Crossbow_AKU3.3_v.3311_G3_onl y"
my HTC will not let me upgrade to anything anymore.. once I run the "ROMUpdateUtility_Wizard_NoID.exe" utility for any version of software including the original PDAmobiz file..
the phone will shutdown when it is supposed to but will not restart.
Now if I hit the reset button it will reboot just fine, it will not go to the colored bars but will boot like nothing ever happened.
it seems like it is freezing from automatically restarting.
any ideas?
also.. any ideas why from this version of crossbow I am losing a LOT of incoming calls?
IPL. 2.26
SPL 2.26
GSM 02.47.11
OS 3.0.0.0
G3
Thank you guys..

Bootloader mode
Try entering Bootloader mode manually first, then running the upgrade. And from what I have read about the 2.47 radio ROM, that is the culprit of your missed calls.

TomInMB said:
Try entering Bootloader mode manually first, then running the upgrade. And from what I have read about the 2.47 radio ROM, that is the culprit of your missed calls.
Click to expand...
Click to collapse
How do I do that?

Bootloader mode
Power off the phone. Then, while holding down the camera button, power it back on. You should then get the 3 color bars. Connect your USB cable and you should then see "USB" on your phone. Then run the upgrade on your PC as you normally do.

I find when all other upgrade utilities fail the Italian NOID one comes up trumps.

neonkoala said:
I find when all other upgrade utilities fail the Italian NOID one comes up trumps.
Click to expand...
Click to collapse
GUYS the camera button did the trick..
when I was trying it earlier it was not working, the trick is that I had to actually shut it down with the off button. (I was just pulling out the battery)
Either way it did it ..
Super thanks guys

"radio bootloader version error"

hi I've got a qtek 9090. It has a "Test Only not for sale" on the screen when it boots up. I wanted to update the ROM on it and when I started this message came up "radio bootloader version error" it happend when the window with % result of update showed up on screen. Since then I my ppc display is grey with "Serial" and "v2.03" on it. I ahve tried this
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
but it didn't help.
If Any one got any idea how to fix it please contact me on my email address [email protected]om
Thanx

Hello,
I Have a spv m2000 and I have excatly the same problem... I Try some versions of rom but it doesn't work...
If your PPC is always in 'Serial' and 'v2.03', you have to reinstall a rom without the radio. To do that, you just need to remove the file radio.nbf in the rom files......and to reinstall the good rom without the radio..
But with this procedure, the radio isn't upgrade.It's just to restart your ppc.
I can't find how to upgrade the radio..
Your bluetooth works well ?? My bluetooth stop after sevral seconds I've launched it and say a problem with the licence.. ANd you?? That's why i would like to upgrade the radio but I can't succeed..
If you find a way to upgrade, please tell me...
Thanks
Rom

southparkfan76 said:
hi I've got a qtek 9090. It has a "Test Only not for sale" on the screen when it boots up. I wanted to update the ROM on it and when I started this message came up "radio bootloader version error" it happend when the window with % result of update showed up on screen. Since then I my ppc display is grey with "Serial" and "v2.03" on it. I ahve tried this
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
but it didn't help.
If Any one got any idea how to fix it please contact me on my email address [email protected]
Thanx
Click to expand...
Click to collapse
Hi
I had the same problem.
My PC was running vista, so i went to a pc running XP and the followed your link and it worked a treat.
Maybe that's your problem.

no gsm radio problem

hi, i've a big problem, i've upgraded my phone today, because it was a mda3 german locked on t-mobile. but the only way to make the upgrade work was not to upgrade radio, so i didn't put it. so, now the phone has been updated in my language, but when i power on it, it says no gsm. can someone say how can i do please!

Which rom did you flash? What is written after letter R while doing a soft reset?

no r
it does not appear anything, the only thing is that
NO GSM
D 5108.a771la

are you sure it's not a CDMA phone? ( j/k)
try reflashing the old rom. and see if it will go back.
if not...
then you are forced to flash the radio rom to a new version
because as you say it cant detect any if you flashed with the new rom.
but i dont see any relevance to the carrier when upgrading the radios, it's still quadband.
and you're stil using the SAME sim card.

hi, i still cannot reflash the radio of my phone, anyone can help me it always says "NO GSM" !!! PLEASE, HELP ME!!!!
please, tell me also if there is a way to format the memory where is installed the radio. thanks

jonnymix said:
hi, i still cannot reflash the radio of my phone, anyone can help me it always says "NO GSM" !!! PLEASE, HELP ME!!!!
please, tell me also if there is a way to format the memory where is installed the radio. thanks
Click to expand...
Click to collapse
As far as I know, the only way to 'format the radio stack' is to flash it with a new radio version.
Your original post is too vague as well.
You have a MDA III from T-Mo, that would make it a GSM = good
"only way to make the upgrade work was not to upgrade radio" - This doesn't make sense as the radio ROM is a separate flash from the OS ROM, the two are not part of the same flash code.
You also 'upgraded' your phone. From what to what? We need to know where and what ROM you flashed the phone to and from.
As for the screen showing NO GSM, is this after power cycling the phone by removing the battery? There is a know bug with WM5 and above where the GSM radio stack is not loaded on boot after a power cycle. The workaround is to soft reset the phone after it shows NO GSM.
(Huh, I'm a senior member now? Wonder when/how that happened... )

hi, thank you for answer.
i dont exactly know which os and radio rom were originally, i bought it original but used and the os was modded by t-mobile in deutch. i upgraded it to wm5 a771la ver 5.1.0.8 and the radio 1.15. then the os worked properly but it says no gsm. i know the bug you said me, because i have it on an another mda III of my brother, there after a soft reset i can solve this problem but it says NO RADIO on two lines, there, there is only one NO GMS . i know that the two roms are in two different flash memories infact i can flash and re-flash the os but when i try to flash the radio an error occurs. please, let make me know if these information can help you to solve my problem. thanks!

jonnymix said:
i know that the two roms are in two different flash memories infact i can flash and re-flash the os but when i try to flash the radio an error occurs. please, let make me know if these information can help you to solve my problem. thanks!
Click to expand...
Click to collapse
And what error is appearing? I didn't see it in your original post.
Personally, I'd try this:
Remove the SIM and any SD cards.
Make sure the battery is fully charged.
Put the phone into boot loader mode
Plug it into a XP (Not Vista) machine
Check to see if the OS recognizes the phone. I believe it will show up as some kind of USB device, not a Generic RNDIS device (I don't have my angel handy to check this)
Then run the radio flash program.

jdc said:
And what error is appearing? I didn't see it in your original post.
Personally, I'd try this:
Remove the SIM and any SD cards.
Make sure the battery is fully charged.
Put the phone into boot loader mode
Plug it into a XP (Not Vista) machine
Check to see if the OS recognizes the phone. I believe it will show up as some kind of USB device, not a Generic RNDIS device (I don't have my angel handy to check this)
Then run the radio flash program.
Click to expand...
Click to collapse
i also have the same problem...how to resolve?upgrade helmi 5.6 rom... NO GSM. phone funtion failed.

[Q] Diamond 2 incorret ROM

Hi,
I have Diamond 2 (from ebay) with P/N: 99HHH004 I tried flash newest official ROM but the system doesnt boot and now it alwas end with tri color screen with message "turbo SW/HW not match!" I tried install few unofficial ROM but it just stock on 0%. I tried russian,asian,taiwan version of official ROM but without success.
So can anyone send me a correct ROM? Or any help?
Thanx and sorry for my english...

hello...take a look at this link...follow the steps..
hope you sucessed...
http://forum.xda-developers.com/showthread.php?t=520312

"2) you must Have Phone Synced with PC in Windows Mobile!!! and it must not be in Flight mode (i.e. radio should be on)."
But if I turn on phone it just stuck on bootloader screen.
gold card will work?

turbo SW/HW not match
I am also having same problem. at least can not reset my phone. getting only three colors. [spl-1.83. oliNex]
pls help me.

@ Kamtar, if u got the right asswer pls let me know it. still i'm trying solve this.
can any one help me ? pls....