Related
I've been trying to get my old extended rom and new Qtek OS on my Wizard (Vario).
But now it gets stuck in the spash screen (ie the one giving the ROM numbers).
I've tried putting the wizard into bootloader mode and I can flash RUU's but when it resets it still gets stuck on the spash screen and won't go any further !!!????
What can I do ??
Please Help
Cheers
John
I should say that I had flashed using button's ROM RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
and this worked fine!
I then copied across my T-mobile Extended ROM and again everything seemed OK.
BUT then I tried to restore my new saved OS ROM using aWizard and this caused a freeze on my Wizard. It was after a hard reset that the wizard stopped at the splash screen.
Now of course I'm limited in my options because Activesync won't work until the Wizard has fully booted up.
I have tried setting the Wizard into bootloader mode and tried several ROM's (RUU Installer ones) but every time the correct splash screen comes up with the new ROM numbers but that is as far as it gets.
I also noticed on hard reset that you get the following message
Format FAT partition
Format failed
it then goes to the splash screen as before.
Are there any other things I can try Or will I have to send it back to T-mobile for a replacement??
(It's only 2 months old and I have re-flashed it with the orginal T-mobile ROM - but still won't go past the splash screen!!)
I live in hope
John
I have this EXACT same problem!
I can reflash any ROM but it will not go past the splash screen. Only difference was I wasn't playing with my extended ROM. I flashed the AKU2 QTEK ROM yesterday and have been fine through several soft resets, etc. This last time I was uninstalling phonealarm and after a soft reset I got a "could not find smswakeup.exe" (or something similar) and it's been stuck ever since! I also get the "Format Failed" message. Can anyone help!?
I think I'm going to have to send it back to T-mobile and hope they give me a replacement. Something is wrong, it doesn't seem to make any difference what ROM I used.
I think I'll reload the T-mobile shipped ROM grom the FTP site and send it back - and claim ignorance that it it suddenlt freezed and now won't boot up! - Bummer!!!
Right I've logged a fault and it will be sent back - let's hope T-mobile can't detect it's been unlocked and had several ROM updates - I suspect they will try a ROM update themselves then give up ???
The worrying thing though is that it IS possible to kill your phone with updates - maybe it was when I used aWizard to try and restore a ROM that did it??? I'll be more carefull next time!!
this has just happened to one of the devices im flashing at the moment.... absolulty f**king raging :evil: :evil:
i wish teher was a solution!!? anyone got any ideas?
activesync wont find it, so aWizard wont work.
i can flash between 3 roms without any problems (1.5.x 1.6.x 2.x) but always hangs on the splash screen. i have flashed back to the default rom that it came installed with it so i could just send it back to o2 (only 2 days old!)
i would rather just get it sorted by myself thoough so if anyone has ANY ideas then please let me know.
thank you!
Good luck! after about 3 days of trying different types of firmware, I gave up and sent it to expansys, for repair. And it looks like they've lost the bloody thing now. :evil:
tonym001 said:
Good luck! after about 3 days of trying different types of firmware, I gave up and sent it to expansys, for repair. And it looks like they've lost the bloody thing now. :evil:
Click to expand...
Click to collapse
yup looks like i might have to give up... ohwell, no worries i will just return it back to O2...
looks like one of our sales guys wont be getting a new phone on tuesday :lol:
same problem here.
tryed to write os with awizzard after changing extended_rom.
kills phone.
format failed..
Tryed different os's from win util - failed
upgraded with sd card methode worked.
in short :
you need a working wizzard to make a os dump on sd card.
Connect to wizzard with usbterm or romupdate.exe or simular.
do a rs2all command to dump os to sd card.
stick this card in broken phone.
hold voice comm button while resetting.
On ask press voice comm button again.
it bow restores the sd backup to phone.
saved mine.....
btw sd card backup can be read ad write by pc with util ntrw.exe .
so if you don't have a working dump i can upload one.
just mail me.
grtx , arnold
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
arnoldl said:
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
Click to expand...
Click to collapse
Don't worry, I met the same problem as you before, almost lost my hope, but finally I managed to fix it.
The solution is simple, that is to find an original SD card backup image from your wizard or others, then try to restore it in the bootloader mode. In my case, it said checksum error or sth else after begin restoring, and it gave up. Then I put my wizard into bootloader mode, picked one offical released RUU package, start reflash again. Finnally, I found the wirzrd works again for me after reboot.
I guess the principle is that the SD restore will destroy some import flash data structure before it said wrong, then the RUU package will rebuilt it wholely in the next reflash.
Hope this helpful, and sorry for my bad english.
There is hope
Last week after trying to downgrade to the original Cingular ROM on my 8125 using aWizard I ended up with a device that was close to being a paperweight. At least I thought so until I read and read and finally was able to get it to the bootloader and then plugged in the USB cable and ran the RUU for the new Qtek ROM (2.17). Guess what happened, yeah it worked. To my surprise I had a perfect device after 15 minutes.
For about 3 hours I thought I was a toast. Never will I do that again.
THIS is truly heaven for me !!
I have my O2 XDA MINI S locked on the splash screen .. and i updated some ROMS to it ....BUT IT DOESNT GET THROUGH IT .... please tell me what to do in a little detailed manner .. please so that i can get my phone to work.. there is no warranty on the phone and i stay IN INDIA . SO YOU'LL ARE MY ONLY HOPE .
my email id is - [email protected]
If you have a dump of the O2 XDA MINI S ..please mail it to me
Plese tell me what to do next ? WILL TRULY APPRECIATE HELP
PLEASE SOME ONE ATLEAST MAIL ME the dump of the os SO THAT I CAN TRY THE SD CARD UPGRADING ,.,,, O2 XDA MINI S
Re: There is hope
Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.
Thank you so much
my mail : [email protected]
Thanks friend
hellomoto_25 said:
Last week after trying to downgrade to the original Cingular ROM on my 8125 using aWizard I ended up with a device that was close to being a paperweight. At least I thought so until I read and read and finally was able to get it to the bootloader and then plugged in the USB cable and ran the RUU for the new Qtek ROM (2.17). Guess what happened, yeah it worked. To my surprise I had a perfect device after 15 minutes.
For about 3 hours I thought I was a toast. Never will I do that again.
Click to expand...
Click to collapse
Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.
Thank you so much
my mail : [email protected]
Thanks friend
odyseus said:
I've been trying to get my old extended rom and new Qtek OS on my Wizard (Vario).
But now it gets stuck in the spash screen (ie the one giving the ROM numbers).
I've tried putting the wizard into bootloader mode and I can flash RUU's but when it resets it still gets stuck on the spash screen and won't go any further !!!????
What can I do ??
Please Help
Cheers
John
Click to expand...
Click to collapse
stuck on o2 screen helppp
Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.I see alot of post, so complicated
Thank you so much
my mail : [email protected]
Thanks friend
flexchen said:
arnoldl said:
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
Click to expand...
Click to collapse
Don't worry, I met the same problem as you before, almost lost my hope, but finally I managed to fix it.
The solution is simple, that is to find an original SD card backup image from your wizard or others, then try to restore it in the bootloader mode. In my case, it said checksum error or sth else after begin restoring, and it gave up. Then I put my wizard into bootloader mode, picked one offical released RUU package, start reflash again. Finnally, I found the wirzrd works again for me after reboot.
I guess the principle is that the SD restore will destroy some import flash data structure before it said wrong, then the RUU package will rebuilt it wholely in the next reflash.
Hope this helpful, and sorry for my bad english.
Click to expand...
Click to collapse
how to use bootloader
could you tell me how to use mentioned bootloader for restoring the images? where can I get the software?
Please help
Hendrick
flexchen said:
arnoldl said:
FarSeide said:
hard reset your device and hold your Camera Button prior to starting the wizard back on.
when the device turns back on, you will get the boot screen. Plug in your USB cable and load one of the known ROMS like the second to last iMate ROM.
This will allow you to get past the splash screen.
Click to expand...
Click to collapse
this didn't work for me.
couls flash rom. even splash screen changed to new roms one.
but still stuck at splash...
tried it with about 4 different orgigenal roms
grtx arnold
Click to expand...
Click to collapse
Don't worry, I met the same problem as you before, almost lost my hope, but finally I managed to fix it.
The solution is simple, that is to find an original SD card backup image from your wizard or others, then try to restore it in the bootloader mode. In my case, it said checksum error or sth else after begin restoring, and it gave up. Then I put my wizard into bootloader mode, picked one offical released RUU package, start reflash again. Finnally, I found the wirzrd works again for me after reboot.
I guess the principle is that the SD restore will destroy some import flash data structure before it said wrong, then the RUU package will rebuilt it wholely in the next reflash.
Hope this helpful, and sorry for my bad english.
Click to expand...
Click to collapse
Hi Arnold
My O2 cda mini s get stuck at splash scree, I read your post, still not so understand how to solve it, could you be so kind to write me step by step, and send me some software to solve it. Your help will be so much appreciated.
Hendrick
Email: [email protected]
arnoldl said:
same problem here.
tryed to write os with awizzard after changing extended_rom.
kills phone.
format failed..
Tryed different os's from win util - failed
upgraded with sd card methode worked.
in short :
you need a working wizzard to make a os dump on sd card.
Connect to wizzard with usbterm or romupdate.exe or simular.
do a rs2all command to dump os to sd card.
stick this card in broken phone.
hold voice comm button while resetting.
On ask press voice comm button again.
it bow restores the sd backup to phone.
saved mine.....
btw sd card backup can be read ad write by pc with util ntrw.exe .
so if you don't have a working dump i can upload one.
just mail me.
grtx , arnold
Click to expand...
Click to collapse
HEEEELLLLP!!!!
A few weeks back i ran the Wizard Extended_Rom Unlocker.
It worked and i saw Ext_Rom2....after sometime i decided it wouldn't do my anymore good to keep it viewable...so i decide to uninstall the unlocker cab. And after a soft reset, everything goes back to normal or i thought it did.
Today i decide to venture into Extended_rom again, and instead of seeing cabs and the config file....i see 3 folders with weird cryptic symbol names.
And when i try and open them i get an error saying
"Cannot open, either it not signed with a trusted certificate or one of the components cannot be found. You might need to reinstall or restore this file."
And this error happens for all 3 folders.
My wizard is working perfectly fine, actually better than it has ever done...but i'm just freaked in the event of a hard reset...
Any help on anything i can do to restore the extended_Rom...
btw...i'm running the Custom Tmobile 2.17 rom created by Xelencin.
and to reiterate...all i did was un-install the MyLovingWife unlocker cab and soft reset....i did not run that other "hide Extended_rom cab"
Much thanks to anyone who can help.[/b]
Is there a way to restore or re-import the extended_rom to replace my currently corrupted one?
Or is re-flashing the only way???
Me, myself and I also played around with the Extended Rom Unlocker Tools, also my Extended Rom got corrupted, it was 'writable', but also empty (I tried to install mine IIWPO.CAB in the Extended Rom, but because I got the newest Rom this was/is a problem). A hard-reset didn't work, you get the "welcome screen", but no customization, so reflashing is the only way to get it completely working again.
Thank you tho
rxr said:
HEEEELLLLP!!!!
A few weeks back i ran the Wizard Extended_Rom Unlocker.
It worked and i saw Ext_Rom2....after sometime i decided it wouldn't do my anymore good to keep it viewable...so i decide to uninstall the unlocker cab. And after a soft reset, everything goes back to normal or i thought it did.
[/b]
Click to expand...
Click to collapse
Had simillar issues after playing with ExtROM.
Format ExtRom with ResoExplorer resolved it. It can not actually format ExtROM, so comes up with an error, but then ExtROM got all CAB files back.
I think it might be, because some standard system call to format this media leads to recover FileSystem structure.
In reality media is protected, so you do not change anything on the media when writing or removing from/to it, it seems just to cache someweher and format function probably fush the cash.
PS: My OS version 2.16.something.
cheers,
maekel.
YES...that did it!!! Thanks...
now my question is...how do i hide the ext_rom again? I tried what i did before and just uninstall the unlocker, but when i go look it up with a reg-editor...Ext_Rom is empty...
i unlock again, and run the format and the files are there....so everything is there under Ext_Rom2.
Can i just leave it like this unlocked and in the event of a Hard-reset it will still work?
Will running the Lock cab work??
rxr said:
YES...that did it!!! Thanks...
now my question is...how do i hide the ext_rom again? I tried what i did before and just uninstall the unlocker, but when i go look it up with a reg-editor...Ext_Rom is empty...
i unlock again, and run the format and the files are there....so everything is there under Ext_Rom2.
Can i just leave it like this unlocked and in the event of a Hard-reset it will still work?
Will running the Lock cab work??
Click to expand...
Click to collapse
Change registry flag.
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1\MountHidden=1
Is this with the ext_rom locked or unlocked??
Shouold i un-install the Unlocker cab then do the registry edit.
I did the reg change...
The Ext_Rom still shows blank.
rxr said:
Is this with the ext_rom locked or unlocked??
Shouold i un-install the Unlocker cab then do the registry edit.
Click to expand...
Click to collapse
I think that CAB is just changing couple of registry entries.
You can easily remove it and never use it again.
rxr said:
I did the reg change...
The Ext_Rom still shows blank.
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1\Bootphase=dword:00000001
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1
1\MountHidden=dword:00000001
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1\Folder=""
I beleive you should not see it anymore
Extended ROM will not load during hard reset
I have searched the forum for several hours, but I could not find a solution to the issue I am having. When I do a hard reset, hit send to begin the format, I get an error saying FORMAT Failed, so it boots back up as if it was just a soft reset. I really need a hard reset, but I am not sure how to make this happen. I have reloaded the ROM several times, but it still does not take and comes up just like a soft reset. I went into bootloader and flashed it that way, but still no go. If anyone could help me find a way to rectify this issue, I would GREATLY appreciate it.
Okay, so I just recently flashed to Touch-IT 4.4 by itje, and it's been working great. However, I just softreset my phone and now it's stuck in a boot loop just after finishing with the first splash with the text Touch-IT in silver..
It should probably be said that it reboots by itself, which I don 't think is normal for a bricked phone?
So I'm a bit stuck and don't really know what to do; Is my phone bricked (in which case I'll just have to unbrick it, which isn't a problem since there's a certain good guide that explain how to and I've already used it once), or what's wrong with my phone?
Meh, turns out it's possible to flash it with the hacked installer as well.. So I'm just going to reinstall the phone.
I just have one thing to say to all of you guys doing all this work on the ROM of Herald/Wing:
YOU. ****ING. ROCK. <3
Debdrup said:
Okay, so I just recently flashed to Touch-IT 4.4 by itje, and it's been working great. However, I just softreset my phone and now it's stuck in a boot loop just after finishing with the first splash with the text Touch-IT in silver..
It should probably be said that it reboots by itself, which I don 't think is normal for a bricked phone?
So I'm a bit stuck and don't really know what to do; Is my phone bricked (in which case I'll just have to unbrick it, which isn't a problem since there's a certain good guide that explain how to and I've already used it once), or what's wrong with my phone?
Meh, turns out it's possible to flash it with the hacked installer as well.. So I'm just going to reinstall the phone.
Click to expand...
Click to collapse
Take out your mSD card while rebooting and your device will start up fine
Is it the card that's doing it? Because I've soft-reset before without problems just fine. <.<
Gaah, I wish I had known that (or waited, but I was in a hurry to get my phone up and running again because I was expecting a call)..
It's not the cards fault. Somewhere here in the forum it was briefly discussed, but I can't find it right now.
It was said, that a certain DLL for SDHC support causes the looping.
It's called something like omap650sdhc.dll or so (you need to find out yourself, should be easy)
and by deleting or renaming it, it should solve the whole problem.
Never tested it myself, but it will not harm your device if you delete/rename that file.
That's the driver for the SD card drive... Depending on the rom you're using, it might be stuck inside the rom so you can't delete the file.
I asked Chikenbull on here to make a program that will rename that Omap file and reboot the device. I haven't tested it yet, but here it is.
Remember to use this AT YOUR OWN RISK.
GAMBIT999 said:
Take out your mSD card while rebooting and your device will start up fine
Click to expand...
Click to collapse
I've been doing this for the last month to avoid a HardReset. I've been having the boot-loop problem since i installed the HTChomeCustomizerV80 and/or HTCplus, and read about the warning too late: http://forum.xda-developers.com/showthread.php?t=326689
I've since removed the Today plugins, and the only annoyance remaining are the Backlight adjust function not working, and having to remove the microsd everytime I restart/power-on the Wing.
As I said, I'm trying to avoid a Hard Reset because I have 30+ programs installed and it's gonna take me a few days to reinstall all of them. I searched here with no success... all I found are the same saying "remove microSD at boot", which is what I'm doing, but it's a pain.
Tried GAMBIT999's suggestion, but can't remove omap850sdhc.dll from the \windows\ folder. Would DUPRADEE's suggestion of renaming this file with the program solve the restart-loop problem? Or is there other methods I haven't found, that'll save me the trouble of a Hard reset?
-cheers
edit: PROBLEM SOLVED!! thanks duprade
omap850sdhc.dll couldn't be deleted, but just changing the extension to omap850sdhc.000 solved the problem!!! Now I can restart without taking out the microSD!!! w00t w00t w00t !!!
Check for errors under Windows
One more possibility I forgot to mention which work fine for me.
After having the boot-loop symptom I took out my mSD card and checked it for errors under Windows.
I let Windows fix the errors and everything worked fine afterwards.
The procedure didn't took long even on a non USB2.0 port.
No card removing or file renaming anymore.
Folks having the boot-loop may try this solution out first before renaming/deleting the DLL.
My problem was SOLVED by simply renaming \Windows\omap850_sdhc.dll
It's funny how if you do not know the cause of the problem, SEARCH is useless. But once you find the answer (thanks Gambit999 and Duprade), going back to Search turns up pages of the same question posted over and over.
Anyways, credit goes to Paul at MoDaCo who found the solution on June 26:
http://www.modaco.com/content/HTC-Atlas-Atlas-MoDaCo-com/256186/Continuous-reboots-/
Changing to a blank new SD did nothing... but by Renaming the file, the PPC will reload the uncorrupted file from the ROM.
pls help
Its impossible to change the name or delete the file!
Pls help me!
p4350 wm 6
Thanks and pls sorry for my english!acces deniend its the reason to no rename!
I have had the same problem.This time after softreset for some Memmaid tweaks.The 1st.time It didnt occur to me to remove sd. and I'm certainly glad this works but heres the prob.After reinserting my 1gb.sd.I now have a file for Storage card & Storage card2.with 2 being the actual card.I cant remove or rename this file and cant launch apps.unless i do so through file explorer.And all progs.on the card are showing inactive generic icons.Any input.I did a hard reset AGAIN.so this would just be for further ref.I'm gettin up the balls to flash for the 1st. time with one of the roms from this site.
jcastex said:
Its impossible to change the name or delete the file!
Pls help me!
p4350 wm 6
Thanks and pls sorry for my english!acces deniend its the reason to no rename!
Click to expand...
Click to collapse
I've the same problem! can anyone help me? I tried Total Commander.
ruebyi
DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave
Is there an option to skip this test? I can't use my phone anymore this way
Which rom do you have? have u tried a hard reset?
clarbj said:
Which rom do you have? have u tried a hard reset?
Click to expand...
Click to collapse
WM6.5.3|WWE|101m|XDAUC|Full Roms By jjblaster3|28205|translatable|8/Jan/2010
I did multiple resets, but now I can't even get the aligment screen (stuck while booting, can't upload other firmware).
edit: now I have the align screen back (I think I should installed the radio before I flashed), is there a way to get around this?
edit: I can flash again.
I flashed back @ 6.1 for now
Should I install another radio just to boot with other firmware?
robuser007 said:
I flashed back @ 6.1 for now
Should I install another radio just to boot with other firmware?
Click to expand...
Click to collapse
but I also have the align screen (can't pass that scren, is very difficult).
I have read that I can delete a file and so skip the calibration, but which file is that? (getting really nuts)
edit: I have o permissions to do that.
I wish I never updated anything, now I can trow it away I guess.
The program Screen remote alignment (In English) doesn't work.
update: always do this:
To bypass screen calibration just put an empty file called "welcome.not" on your storage card.
please make this a sticky.
Moved as not ROM Development...