Hello again..
I'm trying to flash HardSPL, but no tri-color screen, screen goes white and Activesync exits. I also tried to flash Schaps WM6 Pro 4.30 Kaiser, but the Activesync closed again, and i had to ''recover''.
I could manage to see the tri-colored screen, and the progressbar before activesync exited when i tried to flash the Schaps rom.
I'm currently using a Kaiser with WM 6.1 norwegian.
Please guide me
Last time i flashed my old TyTn, it worked. This time I've got problems..
HardSPL will not install - WHITE SCREEN: SOLVED
Thanks a lot. Flashing tomorrow. Its 00:49 in norway now ;-)
Related
I posted this also on wm6 forum but no one replies...
I tried to upgrade to new wm6 italian roms but after upgrade finishes the p3600 doesn't make auto boot, pressing reset the device start booting and show the first scree but after the screen becomes white and stop going on.
The only rom working is this from lwsw wm6.
All other roms (mun, italians translated) after the upgrade the system doesn't finish first boot and remains white.
I can enter in bootloader pressing on+camera+reset and install italian wm5 gps enabled rom or lwsw wm6 english rom, but no one of the others.
I tried also sspl.trin and hard spl but without success.
What can do to let the upgrade finalize with italian or mun's wm6 roms?
Thanks
Hi forum.I've a problem flashing my htc p3600. When I'm trying to install a wm6 rom flashing seem to going right...Smartphone restarted correctly but I've blanc screen and i didn't see a lot of icons(for example number on telephone). Start menu working fine. I use olipro 1.20 and radio 1.46.
Any ideas?
Thanks
Djeghe
Ok, I'm a complete newbie at phone modding... I have read numerous websites and tutorials and posts on how to upgrade my Touch Diamond to Windows 6.5 but i fail. I fail miserably.
My Touch Diamond is an Orange UK Handset with Windows 6.1, about a month ago i upgraded my phone with an official Orange HTC ROM, so I'm currently at version 1.93.405.1 WWE...
Ok so my problem...
I used Olinex HardSPL version 1.38 and I can access the bootloader screen. Easy.
I then try install the Radio, Currently installed is 1.00.25.05 as standard, so I try install the same one again... The connection to my device is active and the screen goes black as the RUU does its thing, then.... nothing! the percentage bar on my PC stays at 0% and my phone is black.
So i think damn it ill try installing the ROM anyways as I already have the Radio version i want, and when the RUU starts the percentage thingy again... its stopped again at 0% and my phone now also says 0% and i check device centre for the connection and its not there... NO CONNECTION! so...
please... tell me where Im going wrong, do i need to CID the phone?
any help would be appreciated, Thanks in advance.
I have downloaded BsB 6.5.1G and also Diamond: [WWE] BsB 6.5/6.5.3 but whenever I sync my mobile phone and start trying the process as required by the intructions on my PC screen it always disconnected when it gets to update displayed by the software version by this time my phone would have displayed four different colour, the version of my device.....
what is the solution or what I should do to pass through this stage?
adebobo1 said:
I have downloaded BsB 6.5.1G and also Diamond: [WWE] BsB 6.5/6.5.3 but whenever I sync my mobile phone and start trying the process as required by the intructions on my PC screen it always disconnected when it gets to update displayed by the software version by this time my phone would have displayed four different colour, the version of my device.....
what is the solution or what I should do to pass through this stage?
Click to expand...
Click to collapse
if you want to upgrade the ROM WM 6.5, previously you had to upgrade HardSPL first
This thread hard spl http://forum.xda-developers.com/showthread.php?t=400402
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
RVerverda said:
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
Click to expand...
Click to collapse
You must SPL, do you have? 3.29 at least
you must have a radio newer than 1.70.X (use 1.70.18.02), didn't you read the thread "how to replace windows mobile with android" ?
If you can't update radio through the SD, use KaiserCustomRUU.exe: put it on a file wherever you want and put the radio you want also on the file and name it "RUU_signed.nbh". It's all on the threads man!
here's the SPL thread...http://forum.xda-developers.com/showthread.php?t=498320 USE THE SEARCH MAN!
no sound is because of no radio updated...