So I'd like to flash a cooked ROM on to my Tilt, but I'd like to keep the functionality of BlackBerry Connect for work, which ROM will do this? My other concern is that I hear there is a way to hack the phone that will let me have BBC and MediaNet running at the same time as necessary, the whole disconnect this to get to that and vice versa has been my main annoyance with BBC because I can't get my IMAP mail when BBC is running.
I have run Blackberry Connect successfully with every ROM I've flashed. Specifically
Dutty's 04/29
L26 v4
currently Death v3
You have to edit the registry setting for aku to .0.4.2
also , most ROMs will turn on the screen when receiving an email... which drains the batery....the L26 ROM does not, however, it has issues holding connectivity to all AT&T settings and I gave up on it.
The Death v3 ROM is what I'm running now - it's very fast and does not crash on me...but it does suffer from 'screen on when email receipt"
twinpeaks said:
I have run Blackberry Connect successfully with every ROM I've flashed. Specifically
Dutty's 04/29
L26 v4
currently Death v3
You have to edit the registry setting for aku to .0.4.2
also , most ROMs will turn on the screen when receiving an email... which drains the batery....the L26 ROM does not, however, it has issues holding connectivity to all AT&T settings and I gave up on it.
The Death v3 ROM is what I'm running now - it's very fast and does not crash on me...but it does suffer from 'screen on when email receipt"
Click to expand...
Click to collapse
From what I've been able to determine, this is a fault of BBC rather than the ROM. I went backwards one step and don't have that problem any more. I really didn't see a difference between the 2 BBC versions except the dreaded screen on email receipt.
twinpeaks said:
I have run Blackberry Connect successfully with every ROM I've flashed. Specifically
Dutty's 04/29
L26 v4
currently Death v3
You have to edit the registry setting for aku to .0.4.2
also , most ROMs will turn on the screen when receiving an email... which drains the batery....the L26 ROM does not, however, it has issues holding connectivity to all AT&T settings and I gave up on it.
The Death v3 ROM is what I'm running now - it's very fast and does not crash on me...but it does suffer from 'screen on when email receipt"
Click to expand...
Click to collapse
Sounds good, I usually read the emails as they arrive since I work in IT so I'll think of it as an accidental blessing. But what about multiple data connections. Having to suspend BBC has been getting on my nerves for a while now. :/
No one has answer?
tribalmunky said:
Sounds good, I usually read the emails as they arrive since I work in IT so I'll think of it as an accidental blessing. But what about multiple data connections. Having to suspend BBC has been getting on my nerves for a while now. :/
Click to expand...
Click to collapse
WM6.1 allows muliple simultaneous data connections. This is nice when you have BBC running and another app like Weather Panel that relies on internet updates.
u have to flash a rom that has the modification made in the provisioning xml document. it is not cuz of wm6.1 but rather the change for vpns has to be cooked in.
search the rom dev forum.
Death v3.5, and Dutty's 04/29 all do simultaneous data for me Laurentius L26 v4 did also but it was very flaky .. lots of "answering modem has disconnected" type messages I gave up on it
thesire said:
u have to flash a rom that has the modification made in the provisioning xml document. it is not cuz of wm6.1 but rather the change for vpns has to be cooked in.
search the rom dev forum.
Click to expand...
Click to collapse
OK, so then I could just download my cooked ROM of choice and make that edit before I flash my Tilt? Sounds simple enough. Thanks!
Thanks for everyone's help. I loaded up Death's 3.5 and it's working as I hoped. 2 simultaneous connections and it seems to be working great!
Twinpeaks, my device doesn't turn on when I get mail, so maybe I'm lucky?
Related
I have installed the 1.12.10 GSM on it after making backups with aWizard. I am happy to report that it does work and that it does speed up the initial connection. Before (with 1.09.11 I beleive) I could log into (enter my PIN) and would still have some time before I would connect and get signal bars. It also seemed to increase refresh rates of the bars. Now the signal is usually found before I even finish entering my PIN muchless the today screen loading.
These tests were made in my basement at my house where I typically have been getting 1-3 bars. now to test 1.13.10 and 2.8 OS to see if it works.
I will say I thought it broke at first because I couldn't get my PC to talk to it after it reloaded, then I did another soft reset and the boot screen the second time didn't list the GSM version, even though the OS did see and use GSM. I re-ran the CID unlock procedure again since I could talk to the phone again. Reset again and GSM ver was on the boot screen again.
I also swapped out the boot screen for a bmp and that worked wonderfully. my only question is if there is a way to swap out the booting screen of the OS and not just the IPL Rom.
cheers,
ET
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
ok, i updated my 8125 to the new rom and am having two issues atm. first, the phone signal icon and the battery icon on the today screen is cut off so i only see the edge icon. secondly, i cannot start wifi at all, no matter what i do :\ (it looks like it's thinking but doesn't actually turn on ) now i did apply the cingular extended rom to this so i dont know if that caused both issues or not. as for edge performance, i'm in an area with bad signal so i couldnt exactly test it. i'm going to be clearing storage tonight and see if that fixes both issues or not. i haven't tested push e-mail as clubimates servers AREN'T supporting direct push (ie they don't have SP2 installed or have it enabled on exchange).
Locked up
Well I am noticing that it is locking up if I let it sit for a while to where I can't bring it back up. I have disabled the lock code to see if that fixes it.
I would have a feeling that the problems you are having are because of the enhanced rom difference. it won't hurt to try it as is like I did since you are having problems with it.
were can I fine install
I look for the rom in the ftp but there is no RUU install of 2.16.9.101 can you please tell me where can I fin this rom
thank you
Here:
http://forum.xda-developers.com/viewtopic.php?t=42638
Scroll down to HTTP server link.
Cheers
thanks
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
after the upgrade i cant find the GPS ICON
even i try to delete the redirect string in the registry like i used to do before
still i cant see the icon on my setting page
please anyone noticed this problem ?
tx
exchguy said:
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
Click to expand...
Click to collapse
i finally fixed the signal strength icon (but don't ask me how), but wifi is still borked
no more problems, lock ups or otherwise
My guess with my problems were related to Battery Pack Pro demo. Even on the original rom I couldn't get it to work right with the assignable hard keys.
Anyway, I did not modify the original EXE one bit like darkjedi said he did. He seems to be much more advanced as I don't know how to do what he did and not that familier with its registry settings yet. But I naver had any problems with Wifi nor with icon placement.
My home wifi does use WPS-PSK TKIP using a Netgear WG302. Battery life seems good, but I do get a little crackle every now and then on my end of the bluetooth handsfree. People I talk to haven't said they hear anything other than perfect clarity. I would have been told if they heard anything since part of my reason to spend the money now rather than later was my voice and signal quality on my old Nokia was getting to be bad and they wouldn't waste a second ragging me if voice and signal problems were re-appearing. But mostly the crackle is few and far between and usually when my headset is on the other side of my body or I am a few feet away from my phone.
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
i dnt see the rush to upgrade if u have a cingular 8125 since there goa offer rom upgrades for the unit. with all the bugs i rather just get a ad2 bt plugin (wish they made it) and just do that
what roms do they offer? On my past phones I have had to have major problems before they would flash a new version of the Rom (my last 2 symbian phones).
darkjedi said:
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
Click to expand...
Click to collapse
ok... the only cab I installed for Cingular was the one I mentioned earlier. I have since installed spb power plus and their weather app and I am still stable. Not one failuer and my bluetooth is actually acting better from some reason. I was working on my car today with teh phone in the car and I was about 10 feet away without any noise or other problems.
Re: thanks
ethorn said:
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Click to expand...
Click to collapse
Is there any settings to configure edge? I only see GPRS in the connections section.
This version appears quite stable but's only my second day since upgrading my 8125 from the QTECH 2.8.7.102. I really like the Comm manager and the Push Email icon works great.
Thanks!
name of account
the only thing that I have notice so far is that the name of my celular company (I could see before upgrade) now i only see numbers.
exchguy said:
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
Click to expand...
Click to collapse
On the new imate ROM I'm getting between 65 and 110 kbps on edge. Latency is still crap at about 1.5 seconds on average, but that's what it's always been for me.
Direct push is great. Assuming you have Exch SP2 installed, push works without any other changes. I'm averaging between 7 and 10 seconds for an entry to push out after it gets to Exchange. I haven't installed the device management tools yet, but I'll do that soon and let you know how well they work.
I just noticed wifi isn't working. If I enable it in comm manager, the button is ringed in green as if it's on, but the left green led does not blink and it does not detect my open, unsecured access point. I did install the cabs from my original cingular extended rom, and one of those appears realted to wifi, but not sure what it does. I'll mess around some more and see what I can do. I'm not totally heartbroken that wifi is messed up, but it does bug me that I don't know why it aint working.
Need Cingulcustomize_No_Emails.cab file
ethorn said:
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
Click to expand...
Click to collapse
Where did you get the "Cingulcustomize_No_Emails.cab" file? I have searched everywhere and cannot find it! Help?
Any of you 8125 owners who installed the imate 2.16.9.101 release have any new feedback on how it's going? Are there still issues with the connection icons or wifi connectivity?
I'm eager to get push mail working and have not been able to get a straight answer from a dozen different folks at Cingular on when their release will come out...so I might give the imate release a shot.
What about going back to the shipping Cingular version after installing the imate update - is it easy/possible? Any problems with extended ROM?
thx
I never even used the phone with the original cingular firmware, I went directly to the Q-tek Test rom. From that rom to this rom, the radios seem a little better (getting better signal, edge seems slightly faster, wifi picks up network much faster) and for some reason the whole feel is "snappier" seems like the menus and such load faster. I haven't had any stability issues, and push is working perfect.
I dont' know about the much faster part, but mine is very stable since i removed battery pack pro. I have SPB's power plus as well as their weather software.
if there are any software you want tested just let me know. Well if I can atleast run it without having to buy it, (i.e. Demos, etc.)
Bluetooth, Wifi, Edge, and signal are all real good. (signal on par with 1.12 radio as well as faster to get a signal than it was)
Battery icon is NOT on the bottom and does NOT show more than 2 bars ( so you have full, somewhere in between, and low).
Battery life seems pretty good, but I can't compare it to any other version as I had the phone 36 hours before I upgraded it to this version.
Great thanks for the feedback yall. So once I do the upgrade, how hard will it be to go back to the shipped version if I ever need to? I have everything backed up using awizard, but I understand there could be problems trying to go to a previous version. I think downgrading via the bootloader mode requires executable rom images, but there isn't one available for the shipping version.
You can still downgrade to an old imate ROM and then use aWizard to restore your cingular ROM.
I have installed it on my Qtek 9100.
I hanged 5 times in 2 days.
What is more annoying is when it hangs and
someone tries to call me at the same time, the
other party hears my phone ringing, but my
Qtek is dead silent.
ethorn said:
I dont' know about the much faster part, but mine is very stable since i removed battery pack pro. I have SPB's power plus as well as their weather software.
if there are any software you want tested just let me know. Well if I can atleast run it without having to buy it, (i.e. Demos, etc.)
Bluetooth, Wifi, Edge, and signal are all real good. (signal on par with 1.12 radio as well as faster to get a signal than it was)
Battery icon is NOT on the bottom and does NOT show more than 2 bars ( so you have full, somewhere in between, and low).
Battery life seems pretty good, but I can't compare it to any other version as I had the phone 36 hours before I upgraded it to this version.
Click to expand...
Click to collapse
Is your wifi working OK? If so, did you install any of the cingular exrom customizations?
Just curious, because I installed the released imate rom and everything is working like a champ except wifi. I installed some of the original customizations from the cingular exrom and I wonder if one of those cabs did something to the wifi config...
What kind of porblems are you having with the wifi?
nickcerda said:
What kind of porblems are you having with the wifi?
Click to expand...
Click to collapse
It won't turn on.. =)
I thought perhaps it was one of the cingular customization cabs I installed from the original exrom, but now I'm not so sure. I looked at all the cabs and the only one that relates to wifi is the cab that sets the key to enable talking to 802.11g APs.
In comm manager, if I click the wifi icon, it appears to attempt to start wifi, but then goes back to an "x" over the wifi button. The wifi radio doesn't start and the left LED that blinks when wifi is on does not come on.
I wish there were some logs to look at on this thing to see why it's failing to start wifi..
Solved the wifi problem. It appears to be related to something in one of the original 8125 exrom cabs. I reinstalled the new imate rom, skipped the imate exrom install, and only installed a couple cabs from the 8125 exrom. The cabs I installed that did not affect wifi were the mms config, the gprs account config, and the edge icon.
All is now well. If I had the time and patience I'd tear apart the original 8125 cabs to see which one might cause wifi probs, but at this point it's not necessary.
I'll stick with it as-is now until cingular releases their own update...assuming that happens before the hermes is out.. =)
I have a Dopod 838 (identical to 8125, I suppose). The new ROM has worked awesome for me. Better in every way. Even the infamous Activesyn problem went away
I am getting ready to take the plunge...just in case...
does anyone have the original 8125 ROM?
I use SPB backup can restore a backup after I upgrade?
I installed this rom on my 9100, and it is much better than it was with any of the other roms including the original shipped rom!
The radio is much clearer and the wifi hooks up faster and runs better, and I have had absolutely NO lock ups at all.
Later
I am thinking of installing it on an 8125...
Without a backup 'known good' ROM to revert back to I am cautious
summiter said:
Solved the wifi problem. It appears to be related to something in one of the original 8125 exrom cabs. I reinstalled the new imate rom, skipped the imate exrom install, and only installed a couple cabs from the 8125 exrom. The cabs I installed that did not affect wifi were the mms config, the gprs account config, and the edge icon.
All is now well. If I had the time and patience I'd tear apart the original 8125 cabs to see which one might cause wifi probs, but at this point it's not necessary.
I'll stick with it as-is now until cingular releases their own update...assuming that happens before the hermes is out.. =)
Click to expand...
Click to collapse
I added the extROM files one by one to see which one caused the wifi issue and it was Signed-gprsstall_128.sa.cab...so far. It was only the third one in a series of 17. I'll see what happens when I add the rest. This cab file moves a radio.dll file around.
I've installed this ROM on 2 8125's. Much better and faster than Cingular's ROM. The only thing I did was to install the Cingulcustomize_No_Emails.cab, Microsoft Voice and TRE Pocket PC registry editor and remove all traces of the Voice Command. WiFi connects to my secured access point flawlessly (though I never use WiFi) and the AKU2 push email typically has my emails coming in in about 8-10 seconds from my Exchange 2003 server. Very infrequent lockups, much less than any other ROM I've installed.
Just my two cents worth ...
Steven
ROM version: 2.16.9.1 WWE
ROM date: 2/6/06
Radio version: 02.07.10
Protocol version: 413.1.03
ExtROM version: 2.16.9.101
Cingulcustomize_No_Emails.cab
What does that cab do?
nickcerda said:
Cingulcustomize_No_Emails.cab
What does that cab do?
Click to expand...
Click to collapse
the one thing I see is it sets up the GPRS settings for data connection ... you do not need it to make phone calls or use Wifi
Step by step to 2.16
I have a cingular 8125. I'm no stranger to flashing roms, I had a SX66 that was running WM5 and I reloladed it all the time. I'd like to see a step by step guide for unlocking the ext rom, flashing the radio and system roms for the 8125. Anyone know a post with that info in it?
Thanks!
Re: Step by step to 2.16
dmelton75 said:
I have a cingular 8125. I'm no stranger to flashing roms, I had a SX66 that was running WM5 and I reloladed it all the time. I'd like to see a step by step guide for unlocking the ext rom, flashing the radio and system roms for the 8125. Anyone know a post with that info in it?
Thanks!
Click to expand...
Click to collapse
Interesting you say you're no stranger to flashing ROMs but then ask for a step by step.
It's laid out quite well in several topics, but basically:
-Use awizard and enable rapi
-Use awizard and CID unlock
-Use awizard to back up Extrom, radio, splash, os
-Run the executable RUU installer for the imate
-On first boot, as soon as you get prompted to choose a carrier, do a soft reset to prevent the imate ext rom stuff from loading
-Install desired customization items from your backed up cingular ext rom. Any of them can be installed EXCPET the gprsstall cab - it will kill your wifi.
There is currently no way to unlock the ext rom in the lates imate upgrade, so you're stuck with what's in there, but you don't have to let it install.
Hey everybody, problem is as follows:
Installation works without problems, and after disabling HTC Home it starts properly. Everything seems to work fine, but after a few minutes of navigation it crashes! Screen freezes and no input is possible. Only way to get out is a soft reset.
does anybody have an idea how to solve the issue? would be thankfull for every suggestion!
by the way, I use Dutty's latest ROM [Jun 07] (Dutty's Diamond V1 Build 19588)
greetings!
ok... it's even worse now!
i uninstalled and reinstalled IGO8. and now it doesn't even start up anymore. well it tries to. the starting screen shows up, and it starts processing. but at some point the whole device (kaiser) just collapses and starts up completely new!
please! someone tell me whats going on!
First: Search in rom tread
Secound: Post rom related question in rom tread (yes this is rom related)
This issue been discussed in about every new build tread since Duttys april 29 hybrid. You will find youre answer in V1 tread, and before you flip. Its normal, youre kaiser isnt dying
Just desactivate AGPS :
Edit the registry HKLM/Software/HTC/SUPL AGPS/
Set 0 to EnableAGPS key.
Restart your kaiser, relaunch IGO8 and enjoy
DrQ is half-right...
You also need to disable HTC-Home if you're under WM6.1 AFAIK.
thanks for your answers...
even though I'm quite new to all of this, I found out myself that aGPS and HTC have to be disabled. I did both, but the problem exists. that's why I posted.
raiisak, thanks for your comment! I think you're also talking bout the aGPS and HTC-home disabling "fix" ... cause I looked over the Dutty V1 thread more than once without finding an other post concerning this problem...
I guess I will just do what Dutty did: going back to his APR 29th build. That one was stable and everything worked without problems. also I share his opinion that 6.1 sucks.
regards!
No.. iGO8 crashes like *crazy* on my stock ATT Tilt (shipped ROM/Radio/etc). If it doesn't crash it locks it up and I have to poke the reset hole.
I'll try disabling AGPS to see if that helps.. I don't have HTC Home installed, although I did a while back.
khaytsus said:
No.. iGO8 crashes like *crazy* on my stock ATT Tilt (shipped ROM/Radio/etc). If it doesn't crash it locks it up and I have to poke the reset hole.
I'll try disabling AGPS to see if that helps.. I don't have HTC Home installed, although I did a while back.
Click to expand...
Click to collapse
AT&T Stock with Bloat? Cause th bloat really makes the Tilt suck.
As long as HTC Home isn't running. Igo and HTC Home share a file. But like twin brothers they don't share it well.
You need to dump dutty
I wasted hours of my life getting iGo8 to work with my Kaiser. Unfortunately it's a bigger problem than just uninstalling HTC Home (if you can) and disabling A-GPS.
In the end I dumped Dutty and flashed L26_Kaiser_Diamond_V8_light release by Laurentius26. This solved all the problems. http://forum.xda-developers.com/showthread.php?t=400118
Only thing that doesn't work with this ROM are custom keyboards (SIP), such as PCM Keyboard. Apart from that iGo8 works a treat
mb said:
I wasted hours of my life getting iGo8 to work with my Kaiser. Unfortunately it's a bigger problem than just uninstalling HTC Home (if you can) and disabling A-GPS.
In the end I dumped Dutty and flashed L26_Kaiser_Diamond_V8_light release by Laurentius26. This solved all the problems. http://forum.xda-developers.com/showthread.php?t=400118
Only thing that doesn't work with this ROM are custom keyboards (SIP), such as PCM Keyboard. Apart from that iGo8 works a treat
Click to expand...
Click to collapse
best solution so far, flash to this rom just to test, deactivate aGPS AND EVERYTHING RUNS GOOD SO FAR
sampcyn718 said:
best solution so far, flash to this rom just to test, deactivate aGPS AND EVERYTHING RUNS GOOD SO FAR
Click to expand...
Click to collapse
Of course lol... it does not have HTC Home included.
You have to disable HTC Home, and disable A-GPS to get iGO8 to work under WM6.1.
cartonneexpress said:
thanks for your answers...
even though I'm quite new to all of this, I found out myself that aGPS and HTC have to be disabled. I did both, but the problem exists. that's why I posted.
raiisak, thanks for your comment! I think you're also talking bout the aGPS and HTC-home disabling "fix" ... cause I looked over the Dutty V1 thread more than once without finding an other post concerning this problem...
I guess I will just do what Dutty did: going back to his APR 29th build. That one was stable and everything worked without problems. also I share his opinion that 6.1 sucks.
regards!
Click to expand...
Click to collapse
I run IGO8 with Dutty's Diamond V1 without problems (if I disable HTC Home, that is). The reboots have something with either the legality of your IGO8 release, or with the fact that you dumped to many POI files in the POI directory (i.e. all available countries). In Dutty's Hybrid V2 this was not an issue, and it must have something to do with memory management in the Diamond ROM.
@mb: different ROMs work best for different people, no need to be a fanboy.
JimmyMcGee said:
AT&T Stock with Bloat? Cause th bloat really makes the Tilt suck.
As long as HTC Home isn't running. Igo and HTC Home share a file. But like twin brothers they don't share it well.
Click to expand...
Click to collapse
As mentioned in this thread, AGPS fixes it. Very odd. iGO has some quirky bugs.. This one I would consider a MAJOR bug, but oh well.. Another bug I noticed (and is on their website in the FAQS) is that their timezone/system time from GPS functionality is hosed.. Always wind up with the time on the PDA being GMT. Have to fiddle to get it to set the time right then disable that functionality or disable it and fix it in WM.
Otherwise, it seems to work well enough.. Wish I had 3d/buildings here to look at, but otherwise the maps look pretty nice with parks and such outlined. Still looking into how to add my own POI's without some silly .net gui in Windows to do it.
Demokiroxx said:
Of course lol... it does not have HTC Home included.
You have to disable HTC Home, and disable A-GPS to get iGO8 to work under WM6.1.
Click to expand...
Click to collapse
Just to be pedantic; AGPS is a problem in WM6.0 as well. WM6.1 may require the additional step of disabling HTC Home.
khaytsus said:
Just to be pedantic; AGPS is a problem in WM6.0 as well. WM6.1 may require the additional step of disabling HTC Home.
Click to expand...
Click to collapse
No. IGO8 works with HTC Home in Dutty's WM6.1 Hybrid V2. It really depends on the OS version in the specific ROM, be it WM6 or WM6.1.
Tried the rest and went back to the Best. Duttys April 29th Hybrid is staying on my tytn2 now . Dutty will be missed here.
dani31 said:
No. IGO8 works with HTC Home in Dutty's WM6.1 Hybrid V2. It really depends on the OS version in the specific ROM, be it WM6 or WM6.1.
Click to expand...
Click to collapse
Missed the "may" part huh? Or got hung up on the 6.1 part? I suppose I shouldn't have even mentioned WM 6.1.
khaytsus said:
Missed the "may" part huh? Or got hung up on the 6.1 part? I suppose I shouldn't have even mentioned WM 6.1.
Click to expand...
Click to collapse
I guess you were just too pedantic ... but you're right, I think I missed the may part. Regards.
Because my company will not allow me to sync with Exchange my only option to get email is either use a real Blackberry or use BB Connect on my TyTNII.
I have tried it on the stock 6.0 ROM, official 6.1, most cooked 6.1 roms and the phone works well untill I add BB Connect, the screen touches are slow and the phone will lag.
Anyone else had this problem and are there any tweaks you might suggest to speed things up a little?
rsacipher said:
Because my company will not allow me to sync with Exchange my only option to get email is either use a real Blackberry or use BB Connect on my TyTNII.
I have tried it on the stock 6.0 ROM, official 6.1, most cooked 6.1 roms and the phone works well untill I add BB Connect, the screen touches are slow and the phone will lag.
Anyone else had this problem and are there any tweaks you might suggest to speed things up a little?
Click to expand...
Click to collapse
I had the same problem with the stock ROM. I'm running in L26 v9 right now and it works pretty well. I also upgraded to BB connect 4.0.0.100 which works better than the .97 version which locked up constantly. Also, the 6.1 HSPDA are great, because you can get the phone to connect to both blackberry and media.net at the same time. So you don't constantly get the blackberry radio blocked problem.
the only problem I'm having now, is the BB connect throws off the landscape display on the L26 rom.
Hope this helps!
Alibaba0101 said:
I had the same problem with the stock ROM. I'm running in L26 v9 right now and it works pretty well. I also upgraded to BB connect 4.0.0.100 which works better than the .97 version which locked up constantly. Also, the 6.1 HSPDA are great, because you can get the phone to connect to both blackberry and media.net at the same time. So you don't constantly get the blackberry radio blocked problem.
the only problem I'm having now, is the BB connect throws off the landscape display on the L26 rom.
Hope this helps!
Click to expand...
Click to collapse
I am using 4.0.0.84, I got this from HTC's site. I've looked on Sems.org and didn't see .100. If you don't mind can you tell me where you got it?
One more thing if you soft reset do you get read messages showing up as unread after the reset?
Hello,
at first I would like to say sorry for my english knowledge ^^
My Problem: I have a HTC Tytn II (or MDA Vario 3 <- the name of T-Mobile) and I would like to use its Internet connection for chatting with ICQ with the program "Palringo".
Every time, when my Phone turns "off" (standby with black display) after 2 minutes of unusage the device cuts the connection to my wlan router at home.
So if Palringo has been started, the program suppresses these function and the phone is in the normal mode with the dimmed display light.
Can you tell me a program, which turns the display off without cutting the connection? Because I won't my display to be turned on 24 hours a day.
I thank you in advance very much
Advanced Config "attached"
Under:
Network\Turn Off Wi-Fi if no activity.
thanks for the quick reply
ok by installing the cab there is an error: I need a higher version of Microsoft .NET Framework than my installed version.
can you tell me which version I need?
Do they exist as.cab file because I don't have my ActiveSync at the moment.
thanks
MDA User 2 said:
thanks for the quick reply
ok by installing the cab there is an error: I need a higher version of Microsoft .NET Framework than my installed version.
can you tell me which version I need?
Do they exist as.cab file because I don't have my ActiveSync at the moment.
thanks
Click to expand...
Click to collapse
It's .Net Compact Framework 3.5
Hope that this works for you as i searched XDA for the .cab since mine is .exe for active sync.
Have uploaded to share as XDA won't allow attach.
http://www.mediafire.com/?fmqjmobmymm
thanks for the great support
I've installed both on my device, did a soft reset and did your instrucions with a second soft reset.
But the phone always still cuts the wlan connection, when the phone turns in standby mode.
I noticed no difference too before
A possibility, that I can receive text messages while the display is black would be great.
To be honest i was guessin and that looks like the option.
Kaiser Tweak does it
Also
http://pockettoolman.blogspot.com/
Bear in mind i'm using the search here as never had to always have wi-fi always on.
i have always desired this feature also but the kaisertweak and/or advancedconfig setting seems to be highly ROM dependent. i have recently moved on to wm6.5 ROMs and so far NONE of the wm6.5 ROMs i have tried can keep WIFI on in standby mode.
in my experience with some cooked ROMs, the ONLY ROM that actually achieves this feature has been SJ's HyperDragon IV Rhodium ROM (link in my signature).
another option (i have not tested this option myself) might be to use a screen off utility...i believe PSShutXP does something to that effect?!?
good luck!
NOTE: i posted detailed testing results a month or two ago in another thread that prove that the particular HyperDragon ROM i have mentioned REALLY has this behavior. search my posts and you will certainly find it!
here is the thread i mentioned with my testing results for the functionality the thread-starter desires:
http://forum.xda-developers.com/showthread.php?t=511979