Hi All,
Could someone please let me know how to use the GPS in my phone. I have tried upgrading the phone to different ROMS that were supposed to enable the GPS and now I am currently using the official HTC WM6 Australia but I cannot get the GPS detected in TomTom or Google Maps. Any help on this would be very, very appreciated since one of the reasons because I bought the phone was because of the GPS...
Thanks in advance
what settings are you using for your TomTom?
Does it say "No GPS Device"?
If it says "Waiting for a valid GPS signal", then you just gotta walk outdoor and wait a few mins...
Note that it takes quite awhile for the first lock.
please state your radio version as well
GPS Problems
Hi,
Windows Mobile 6 Professional (Build 17944.0.3.1)
ROM. 3.00.707.17
ROM Date 06/29/07
Radio Version. 1.38.00.11
I use the "Other NMEA GPS receiver" /115200 GPS baud rate /GPS in COM9
and it says "waiting for a valid GPS signal..." but I have been outside the house waiting for 20 minutes and it doesn't pick up the signal. My TomTom bluetooth GPS used to pick up the signal in 1 minute.
If I get this GPS running, how long will I have to wait everytime I want to use my GPS?
Thanks
Alonso
sounds like a tom tom configuration issue.. .there are threads for this in the forum, cause your radio and rom are up to date.. (although i'd suggest a newer radio to get rid of battery drain). It definitely shouldn't take 20 minutes.. i think within 4 minutes it should be set, most of the time MUCH quicker (2min?)
Where can I get the radios
Sure, where can I get the radios updates?
Are all compatible with all the different ROM versions?
I had similar issue with Tomtom recently. After I have TomTOM software downdgraded back to version 6.010 instead of 6.030 problem is gone.
i9796674 said:
Hi,
Windows Mobile 6 Professional (Build 17944.0.3.1)
ROM. 3.00.707.17
ROM Date 06/29/07
Radio Version. 1.38.00.11
I use the "Other NMEA GPS receiver" /115200 GPS baud rate /GPS in COM9
and it says "waiting for a valid GPS signal..." but I have been outside the house waiting for 20 minutes and it doesn't pick up the signal. My TomTom bluetooth GPS used to pick up the signal in 1 minute.
If I get this GPS running, how long will I have to wait everytime I want to use my GPS?
Thanks
Alonso
Click to expand...
Click to collapse
First of all, your GPS device IS detected. There is too steps when Tomtom is trying to make a GPS fix: 1) no GPS device 2) waiting for a valid signal. If you've already reached the second one it means Tomtom can sense your GPS but it cannot aquire the three satelits signal required for a valid location fix.
I would suggest you upgrade your radio. Athough the 1.38 one can work, I didn't have a good GPS with it and it tookme ages for a fix, and sometimes no fix possible.
Besides, that radio wasn't made for the newest wm6 roms.
1.46 will work way better for that.
And since Tomtom is not the lightest application for GPS testing, I would suggest you try other apps such as GPS test (which is free etc.) you'll get a fix quicker, and once you had a fix, all other applications will fix instantly too.
You can try the GPS function in the camera too, which is quite light too and fix quicker than Tomtom.
I have just installed TomTom 6 on my HW6510. I can get the sound working by renaming the file BtCoreIf.dll. However I can't select the internal GPS receiver by following the instructions on a previous thread.
I deleted the file Navigator (under the directory navigator) - on restarting TomTom it just asks me for preferences (language, left / right handed etc..) it does not give me any options for selecting the receiver.
I must be missing something but don't know what.
Any help would be appreciated.
Dump tomtom
had loads of never ending issues with tomtom on my 6515. between map errors , no sound, hig system requirements and plain bad programming i eventually followed a complaint thread at pda4x.com and decided to go with IGO. never looked back, even dumped tomtom off my wifes pda and installed IGO for her as well.
Possibly its just the Australia maps that are that bad on tomtom but i find IGO to be a far superior product with greater ease of use and better routing. Easier to install, and NO ISSUES!!!
I am afraid i cant help you. tomtom runs buggy on my tornado and on my old blue angel when i had it , it worked ok, but slow, i got it running perfectly with the 6515 for about two weeks, after which it started loosing the gps.. (ie: had to find gps hardware every time i started tomtom). But note, when it was running it ws sluggish (possibly sd issues).I reiterate what i said in the last post. dump tomtom. on this device igo 2007+ runs waaaaaaaaaaaaaaay better, much faster response and no bugs. Personally i find the routing to be better anyhow.
PS. Garmin XT runs fantastically. installed since my last post. if one was to install a cracked version, which of course one would not do, i would have to say the process was horribly complicated . But worth it. garmin has to date given me the best drive, plus integration of the garmin desktop map bundles available make it a win win
if you need help with the garmin install for integrated gps units pm me!
Thanks for the response - I will probably change to iGO. Before I do, one point to clarify, you state "after which it started loosing the gps.. (ie: had to find gps hardware every time i started tomtom)".
Was the finding of the GPS hardware an automatic action once TomTom started or was this something you had to force?
nope random, seemed to be tied to the autoupdate feature of the quickgps software on the 6515. if gprs was not connected then somehow it would not go over to old manual sattelite fix and just hung in limbo. if gprs is on or quickgps is in an "updated" state it seemed fine. the quickfix was to go into tomtom gps settings and "refind" the gps each time. damn annoying.
note here.. both tom tom and igo seemed to "lose focus" because of the quickgps app. basically you tap tomtom navigator shortcut.. tomtom boots, but then quickgps kicks in and shifts focus from tomtom and never gives it back until you tap the screen. in the case of IGO this was worse because if you tapped the [backarrow] button on the menu it would tap the windows key instead and the only way to fix that is to actualy start an app on the start bar drop down then kil it and "focus" would return to Igo. Once again only an issue if the quickgps software is not up to date. when i say update i mean that its downloaded the latest sattelite position files, not the actual program version update. I did update the version from ver 1.3 to ver 1.6 did not fix this issue
best of luck
PS I got a p3600i the other day.. lovely phone but sucks butt as a gps (very slow sattelite fix) compared to the 6515 running igo so my 6515 still lives in my car
nauseum said:
nope random, seemed to be tied to the autoupdate feature of the quickgps software on the 6515. if gprs was not connected then somehow it would not go over to old manual sattelite fix and just hung in limbo. if gprs is on or quickgps is in an "updated" state it seemed fine. the quickfix was to go into tomtom gps settings and "refind" the gps each time. damn annoying.
note here.. both tom tom and igo seemed to "lose focus" because of the quickgps app. basically you tap tomtom navigator shortcut.. tomtom boots, but then quickgps kicks in and shifts focus from tomtom and never gives it back until you tap the screen. in the case of IGO this was worse because if you tapped the [backarrow] button on the menu it would tap the windows key instead and the only way to fix that is to actualy start an app on the start bar drop down then kil it and "focus" would return to Igo. Once again only an issue if the quickgps software is not up to date. when i say update i mean that its downloaded the latest sattelite position files, not the actual program version update. I did update the version from ver 1.3 to ver 1.6 did not fix this issue
best of luck
PS I got a p3600i the other day.. lovely phone but sucks butt as a gps (very slow sattelite fix) compared to the 6515 running igo so my 6515 still lives in my car
Click to expand...
Click to collapse
Not bad. Good use of your old phone.
Ok so I have Tomtom 6.032 and also GPSTEST installed, GPSTEST is using com4 9600baud and it finds the GPS and also the satellites without issue. Now on to TomTom, It finds the GPS using com4 as well as built in, but it will not locate any satellites I left it out side in the bright sun for an hour (plugged in) and it still said searching for satellites. Now its nice to know where I am using GPSTEST, but what I need is to be able to locate a route using TomTom, yet as I said it will not find the satellites (but does find the GPS unit). Quick GPS is up to date and has 4+ days left in the current download.
So I had TomTom working previously at home (so I assumed it would still work), and then needed it to get to a customers location and found that poof it no longer works. One of the major reasons I wanted a Kaiser over the Verizon phone was the GPS unit.
Any idea why 1 GPS program works and TomTom does not? As I said it does not appear to be any issue with connecting to the GPS unit only locating satellites.
Thanks,
ERIC
Try reading through this forum there are plenty of links on fixes like this I am sure you will find what you are looking for.
http://forum.xda-developers.com/showthread.php?t=330235
Hi,
this last week I have problems with the GPS. This only captured one/two signals and the quickgps was actuality (6days 23 hours). If I updated the quickgps then it worked very good with 8/10 signals the first time that used tomtom.
But turn off and turn on the tomtom then it didn't work until updated the quickgps.
Please can anyone help me?
Sorry for my bad english.
Regards
umm i tried to understand the best i can....
but r u saying that it does work well when u run quickgps or not?
It works well just the first time when I update quickgps. After close tomtom and reopen it, the GPS onlyu capture one signal and don't work.
If I close tomtom and update again quickgps then works once but if don't update quickgps then don't work well.
This is like after use once tomtom then I dont have quickgps ...
lanzador said:
It works well just the first time when I update quickgps. After close tomtom and reopen it, the GPS onlyu capture one signal and don't work.
If I close tomtom and update again quickgps then works once but if don't update quickgps then don't work well.
This is like after use once tomtom then I dont have quickgps ...
Click to expand...
Click to collapse
I usually run quickgps if I start TomTom from different locations, although it shouldn't be necessary, I just do it cause i hate not getting a fix.
Anyhow, what other gps applications do you have on your device? gpstest, gpsrouter????
Hi,
I've just got my HTC Touch Diamond, and I can't get it to find ANY satellites in either Google Maps or TomTom Navigator 6. It has worked on a couple of occasions - both programs have been able to locate satellites, but only once or twice, and only after about 30-40 minutes searching.
I've got a Touch Cruise as well, and the one thing that always worked very well on it is the GPS, particularly with TomTom. Within a few seconds, the Cruise ALWAYS finds at least a couple of satellites, even indoors. The Diamond never seems to be able to find any, even when I stood on top of a hill in open ground for 45 minutes yesterday!
I'm guessing it's a configuration problem or conflict of some kind, given the fact that it HAS found 4-8 satellites a couple of times. The GPS settings in Windows are precisely the same as on my Cruise (COM4 and 4800 baud), the QuickGPS is up-to date, and Assisted GPS is active according to Advanced Config.
One thing I did notice is that TomTom Navigator 6.03 doesn't give me the option to select 'Built-In GPS Reciever' on the Diamond (my Cruise TomTom is set to 'Built-In GPS Reciever). I have to select 'Other NMEA GPS Receiver' and set 4800 baud and COM4. It DOES seem to find the GPS device, but it doesn't find any satellites (except once or twice). I thought this might be the source of the problem, until I tried Google Maps and found that that couldn't find any satellites either. Running the Cruise and Diamond side-by-side, the Cruise finds a good number of satellites in just a few seconds, whereas the Diamond is still searching for its first after an hour!
Has anyone else had this problem on the Diamond, or with WM 6.1? Does anyone have any clue how I might be able to resolve it? Right now, I'm feeling that I've been suckered into buying yet another HTC device that simply doesn't work properly. Any input would be greatly appreciated.
Thanks,
Rob.
P.S. I can't get SRS WOW to work on the Diamond either. All sound output just disappears completely, and when I launch the SRS WOW application it says that no driver is installed. No amount of soft-resetting has resolved it, and in the end I had to uninstall SRS to get my system sound back. Does anybody know how I can get SRS WOW onto the Touch Diamond?
HTC Touch Diamond:
ROM: 1.37.405.1 WWE (10/06/2008)
Radio: 1.00.25.03
Protocol: 52.26a.25.09H
doesn't the diamond have tomtom 7 built in or something? try the tomtom 7 cab floating around if you don't have it.
Why not post this in the diamond forum.
Or, even better, read the FAQ, search like it says, then get here http://www.google.com/cse?cx=000825...d+gps&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
Rory
YEAH THE GPS ON DIAMOND DON't WORK!!
Yeah, I was so excited buying my diamond.. I always keep accessories brand new so incase I resell for any reason..so the first time I charged it up w/ a usb cord and it died in a couple of hours. I thought it needed to be charged from its own charger. So I took out the charger that came w/ it, charged it fully and it died again in 3-4 hours of using it. I was super angry. So, finally I am lookin around for the gps ( navigation ) software, only to soon realize that there is none. So, I put in the application cd that comes w/ the phone to find out that there isnt any apps on it. Anyway I install an old version of google maps on the phone that I used w/ my palm treo and realized it only picked me up w/ in 1100 meters of where I was at. I thought it was the old google and the new one would of had better gps locationing, but now that I read your blog and find out that this phone really sucks for real, I am super angry!! I just paid $799 for this crap! I should of stayed w/ my big e90. I even registered a name on this site just to tell you I agree, I will keep bugging HTC until they send me something new and fix it. They can atleast send me that cool dock they have on their website. And how did u get the tom tom for it?????????? Koda
Works with Tomtom 6
The GPS on my diamond works with Tomtom 6. Select "Other NMEA GPS receiver", Baud rate 4800, Com4. It even gets GPS signal inside my apartment, better than my stand alone GPS.
Edit: Just tested with google maps, GPS works well.
Htc Touch Diamond Gps
ISN' THe phone suppose to have built in GPS? As in the NOkia e and N series?
Gps Does Work
I Did Not Have Gps Selected In Pll Up Menu
I finally got it working
I've been having the exact same problem with Tom Tom 7. It would either say "No GPS device!" or it would have terrible signal so I couldn't get a lock. The solution was to Turn off assisted GPS and reset the diamond. Now i get a lock in 10 to 15 seconds when indoors!
And on a personal note, I just wanna say a HUGE thanks to everyone who posts on this forum and the guys who run this (even the guys posting problems and not solutions) it's been a huge help (and good reading) ever since i stubled onto this site.
Thanks, Aaron
HI,
were can I Turn off assisted GPS?
In TomTom 7 do you use internal GPS antenna? Or NMEA?
Guys,i have tried every single way on this page to get a GPS signle on my HTC Diamond but it always says "NO GPS Device" on Tomtom 7 or "No GPS reciever" on Google Maps, ...etc.
And there is no QuickGPS utility or Assisted GPS in my setting,programs, or setup CDs. There is only the External GPS on the Settings-System.
I am afraid that the GPS is actually closed or disabled somehow.
Please if someone has found a solution or knows how to unlock the headset's GPS, post a reply.
I really like tha phone but feel like a sucker because of the GPS thing.
same problem no gps
Have the same problem - baut i have the quick gps program - tried everything but not even after 30 minutes it finds a satelite
Mine never gets a signal inside, but outside it seems fine. Try something like this an go stand outside for a bit
I'm in the same boat as you Europeart.
And it's very frustrating!!!!!
Have a T-Mobile Compact IV with the Tomtom 7 package I found on this forum. I didn't get any voices but after downloading and installing the free map it can't find the internal GPS. I thought this rip was for the diamond, so it should work exactly the same!?
Added to the Google Maps will only triangulate my nearabout position with the use of cell phone towers. I can't find anything to play with the GPS and I've never managed to pick up any satellites even with that little app that downloads their positions.
Has anyone figured this one out?
quickgps
after trying everything I tried to make a hard reset thrue the menu (delete memory - en español borrar memoria) - pero me ha borrado la memoria incorporada (4GB) y no la memoria del movil ni un hard reset. With volume down - enter (round button) and soft reset with the pen (red button in penhole) pressing some seconds until you see a white display I got it - but I had to install everything - contacts, too.
But now it works - first time took 2-3 minutes, second time only 3 seconds!!!!!!!!!!!!
great!!!!!!!!!!!!!!!!!!!
Hope it don't change again - somebody knows?
thanks everybody for help inhere
Markus, a german from spain
More than one Navigation software!!!
Hi,
I had troubles with HTC Diamond GPS where I had to Hard Reset the phone to get the GPS working.
There is a suspicion on GPS problems with HTC Diamond!!
I have 2 navigation software, TomTom 7 and IGO, and of course the built-in Google Map. However, earlier when I had problems, I used to open tomtom try it, close the problem, and open IGO, play with it and close it.
The GPS then stopped working. I hard-reset the phone, and installed again both software but used only one, IGO and opened Google Maps but didn't use the GPS.
However, today, I opened Google Maps, used GPS and closed it. Now I am trying to open IGO and use the GPS but stopped working. Having the problem again.
Can anybody please confirm my suspicion on the problem which is that you cannot use more than one navigation program on HTC Diamond as somehow it hangs on the internal GPS and maybe blocks it?
Did anybody try it??
Following
Or maybe only between IGO 8 and TomTom 7 when the GPS hangs!
RH Photography said:
Hi,
I've just got my HTC Touch Diamond, and I can't get it to find ANY satellites in either Google Maps or TomTom Navigator 6. It has worked on a couple of occasions - both programs have been able to locate satellites, but only once or twice, and only after about 30-40 minutes searching.
I've got a Touch Cruise as well, and the one thing that always worked very well on it is the GPS, particularly with TomTom. Within a few seconds, the Cruise ALWAYS finds at least a couple of satellites, even indoors. The Diamond never seems to be able to find any, even when I stood on top of a hill in open ground for 45 minutes yesterday!
I'm guessing it's a configuration problem or conflict of some kind, given the fact that it HAS found 4-8 satellites a couple of times. The GPS settings in Windows are precisely the same as on my Cruise (COM4 and 4800 baud), the QuickGPS is up-to date, and Assisted GPS is active according to Advanced Config.
One thing I did notice is that TomTom Navigator 6.03 doesn't give me the option to select 'Built-In GPS Reciever' on the Diamond (my Cruise TomTom is set to 'Built-In GPS Reciever). I have to select 'Other NMEA GPS Receiver' and set 4800 baud and COM4. It DOES seem to find the GPS device, but it doesn't find any satellites (except once or twice). I thought this might be the source of the problem, until I tried Google Maps and found that that couldn't find any satellites either. Running the Cruise and Diamond side-by-side, the Cruise finds a good number of satellites in just a few seconds, whereas the Diamond is still searching for its first after an hour!
Has anyone else had this problem on the Diamond, or with WM 6.1? Does anyone have any clue how I might be able to resolve it? Right now, I'm feeling that I've been suckered into buying yet another HTC device that simply doesn't work properly. Any input would be greatly appreciated.
Thanks,
Rob.
P.S. I can't get SRS WOW to work on the Diamond either. All sound output just disappears completely, and when I launch the SRS WOW application it says that no driver is installed. No amount of soft-resetting has resolved it, and in the end I had to uninstall SRS to get my system sound back. Does anybody know how I can get SRS WOW onto the Touch Diamond?
HTC Touch Diamond:
ROM: 1.37.405.1 WWE (10/06/2008)
Radio: 1.00.25.03
Protocol: 52.26a.25.09H
Click to expand...
Click to collapse
Hi,
I've just bought an HTC TD too, being the impatient, rather than the academic, type I registered with TomTom and went straight to their support page (shortest distance between two points etc...). There you will find the instructions to configure TomTom/Diamond GPS settings 'Configuring the built-in GPS receiver on your HTC device..'
It works.
I see that, if you haven't done so yet, you need to go to the HTC site and update to the latest ROM too - gives you quad band and a speedup. You have to register there too!
NoData is a useful program.
HTC Touch Diamond
WM 6.1
ROM 1.93.405.1 WWE 07/17/08
Radio version: 1.00.25.05
Protocol version: 52.29.25.12W
TomTom7 (free with 1 city map)
Hope this helped.
I had the same problem...
A-GPS on, with TomTom 7: no fix. When I turned A-GPS off everything was fine.
I would like to know wether A-GPS should be supported by the nav-software in order to work, or that A-GPS isn't well implemented in the Touch Diamond.
Does anybody have a clue about that?
**** EDIT ****
I got this from another forum:
it will work if you set the baud rate in TT to 2400. Otherwise turn agps off and it works at the regular setting. Haven't really notices a difference in performance one way or another.
Click to expand...
Click to collapse
I tried this, but it didn't work for me (even other baud rates)...
Hi All!
I have install IGo8 on my diamond. It’s OK. GPS Device founded. But it can’t receive information from satellites. Visual GPS program show me 15 satellites in view but anyone in use. Why? What I should do?
I did HR. Was at the street. Get off battery. But nothing.
Help me please!
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
Diamond_ASerg.9_RUS
geksone said:
Hi All!
I have install IGo8 on my diamond. It’s OK. GPS Device founded. But it can’t receive information from satellites. Visual GPS program show me 15 satellites in view but anyone in use. Why? What I should do?
I did HR. Was at the street. Get off battery. But nothing.
Help me please!
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
Diamond_ASerg.9_RUS
Click to expand...
Click to collapse
one more time change roms, all ok