im using an att tilt and have installed the touchflo cube cabs but all i get is the error message that touchflo is already running, yet i dont see it. Which cabs are recommended to be installed or im a doing something wrong
Krizmo67 said:
im using an att tilt and have installed the touchflo cube cabs but all i get is the error message that touchflo is already running, yet i dont see it. Which cabs are recommended to be installed or im a doing something wrong
Click to expand...
Click to collapse
Touch Flo runs in the background and when you install the cube you end up with a double installation. Go into your touch flo settings and uncheck enable touch flo and then do a soft reset. Then use the screen swipes to run the cube as normal.
Will try it!
Thank you Denco7!
Related
Is it possible to have touch-flo working on our wm6 himalaya
the other devices apart from touch
dont seem to be able to get it working as it does on touch
so i would not count on it
but few components of touch flo seems work.
I think at first we need fix gprs trouble.
yeah but from what i understand they need to use some hardware button to activate some of the flo
which the touch people dont
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
doubt it though :S
sorry for offtop
wm6 give at least Bluetooth PAN over MS drivers.
Rudegar said:
what i'm intresting in is if wm6 will give better bluetooth a2dp for himalaya
Click to expand...
Click to collapse
Works flawlessly with 400 MHz.
Much better than WM 5.0 on my StarTrec headphone.
Sascha
would the touchflo on blue angel would work on himalaya?
Where can one download touchflo??
I want to try it out!
Im looking for this file: Touch Flo (Alpha).zip
Will it work on HIma??
Thanks guys!!!!
recall a link here
http://forum.xda-developers.com/showthread.php?t=326523&page=6
Touch Flo Alpha - not working on Hima
I must hard reset.
divocak said:
Touch Flo Alpha - not working on Hima
I must hard reset.
Click to expand...
Click to collapse
Yes i also confirm this. It isnt working.. my device is now freezed on boot screen.. hard resetting it...
from what i've picked up in forums for trinity and hermes then
the touch flo require a special screen dll
all devices have that dll but the touchs is different
and they all seem spc to the device so one cant just move the dll from touch to another device
well that is to say one cant move the dll from touch to another device yet!
When you search Youtube for Touchflo, you get a whole bunch of clips from all kinds of HTC devices running Touchflo quite well. Some do use buttons (who cares?) with touch screen finger touch mode, others seem not to touch any hardware buttons at all. In all cases they're able to access anything on screen without ever grabbing a stylus.
Although I've not yet been able to taste this kinda success on my Hima, it gives me good hope that soon enough it'll be available to us as well.
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
divocak said:
In HELMI_C addon2 is touchflo version which i can install (and mustn´t hard resert). But i can´t run it - some problem with certificate.
Click to expand...
Click to collapse
I hope u don't mind, I will post this in the main thread for the Tofclock ROM here.
http://forum.xda-developers.com/showthread.php?p=1499747&posted=1#post1499747
We might have a solution.
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
neoknowles said:
tofclock wm6 rom all installed ok....(with tochtest.cab app from addon2)
touchflo opens in bits... (goto programs then touchflo) theres separate apps for each screen...makes sense..
what dosnt work at all is the task bar button at the bottom,... comes up with "cannot be opened. either it is not a trusted certificate, or one of its components cannot be found....try reinsalling ect..."
in the top left of the error window it has ' " ' ..what is it trying to open???
ive trailed through all the settings but theres nothing to configure for this,,, id would be amazing to get this working like the 'touch' phone...
anyone any ideas????
Click to expand...
Click to collapse
Got the same problem.
Got the same message today from another taskbar button. I downloaded the test version of Pocket Hack Master today. I uninstalled it also for several other issues a.o. that it wants to constantly run at the highest turbo speed, telling me that CPU load is 100%, while I want to underclock to expand battery life.
But the same message from unrelated taskbar buttons sounds like we found another bug in the ROM. HTC and Anton Topov both spread their software with trusted certificates I assume. And I checked, there was nothing wrong with the startup shortcut of PHM as you probably checked for Touchflo.
Is this doable? Can you install the cab on any wm6 phone and have it work?
Thanks.
doesn't even have a touch screen, using http://www.samsung.com/us/consumer/...btype=verizonwireless&model_cd=SCH-I760ZKAVZW
as an example. That knocks off alot of software you might want to install. And what makes you thing touchflo will work without a touch screen?
well i have a i760 and i installed a touch flo cab on it.. and it seems to work fine.. except the comm manager doesn't work.. here's the link to where i got the cab from.. u should try and see if it works on urs http://forum.xda-developers.com/showthread.php?t=343583&highlight=touchflo+beta
ekw said:
doesn't even have a touch screen, using http://www.samsung.com/us/consumer/...btype=verizonwireless&model_cd=SCH-I760ZKAVZW
as an example. That knocks off alot of software you might want to install. And what makes you thing touchflo will work without a touch screen?
Click to expand...
Click to collapse
It does have a touch screen.
ekw said:
doesn't even have a touch screen, using http://www.samsung.com/us/consumer/...btype=verizonwireless&model_cd=SCH-I760ZKAVZW
as an example. That knocks off alot of software you might want to install. And what makes you thing touchflo will work without a touch screen?
Click to expand...
Click to collapse
My friend has that phone and it is a touch screen.
my bad ;D.
I'm still trying to figure out why I cannot get the TouchFlo up gesture to work on my TyTN II. I'm trying to use TouchCommander, but also installed and looked at Slither's Cube. I absolutely cannot get the up gesture to open either software. Once running on the screen, TC and Slither's Cube work with left, right and down gestures, but not the up gesture.
I've concluded that somewhere along the line I 'broke' something on my TyTN. Can all of you who have successfully installed and are using either TC, Slither's Cube or duttythroy Cube tell me what apps are in your Startup folder? Other than a shortcut to start FTouchFlo is there another (or different) TouchFlo app in the Startup folder? Also, can you tell me what version of FTouchFlo you have installed? I see versions 1.0, 1.1, 1.2,1.3, 1.4 and 1.4.1 are available.
While I am able to use TC by mapping a softkey to it, I really would like to figure out how to use the up gesture to start the app.
Thanks in advance.
-Bob-
Man, is no one using one of the 3 TouchFlo apps I listed???? I'm just trying to figure out why I can't get the up gesture (open) command to work. Please, please, please, just tell me what files are in your Startup folder. Then I will stop bugging you all.
-Bob-
TF3D HD version as been ported from the blackstone to the sony X1
http://forum.xda-developers.com/showthread.php?t=442154
bc it has been sucessfully stripped and placed in cab form is there any hope for getting this running on our kaisers?
tf3d has already been ported to kaisers and other qvga devices...heres the cab silly
http://www.4shared.com/file/71379443/4e985d8e/TF3D-QVGA.html
pazookie said:
tf3d has already been ported to kaisers and other qvga devices...heres the cab silly
http://www.4shared.com/file/71379443/4e985d8e/TF3D-QVGA.html
Click to expand...
Click to collapse
lol correct me if im wrong but isnt this version not practical? ie cant turn off phone while enabled?
I will try it out ether way, but the version i listed as advantages over the version currently ported, new tables n stuff.
jug6ernaut said:
lol correct me if im wrong but isnt this version not practical? ie cant turn off phone while enabled?
I will try it out ether way, but the version i listed as advantages over the version currently ported, new tables n stuff.
Click to expand...
Click to collapse
true, the touch HD tf3d is something different than the tf3d from diamond/touch pro.
there currently working on the touch HD to port it to the Diamond/touch pro.
after that it wouldnt take to long to succesfully port this little cool app. to the kaiser and other qvga screens, just wait and see
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
All you needed to do was to reassign the Windows key back to the Start Menu after you uninstalled.
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
Not sure if you have the new HTC Class Action Drivers or not, but they are required to run the TF3D. It won't initialize without them.
splayer7 said:
Not sure if you have the new HTC Class Action Drivers or not, but they are required to run the TF3D. It won't initialize without them.
Click to expand...
Click to collapse
that and this is ment for the X1....which is a vga screen i believe
erwinpiero said:
Try on my Kaiser's Dutty's ROM installed, it won't run, just display launching TouchFlo 3D and never comes out, lately i uninstalled it and my windows start button doesn't work, hard reset is the only way to solve it
Click to expand...
Click to collapse
Reread the HTC-CA driver requirements. That Dutty rom doesn't qualify as WM6.1.
NuShrike said:
Reread the HTC-CA driver requirements. That Dutty rom doesn't qualify as WM6.1.
Click to expand...
Click to collapse
not to mention this is a VGA program...thats why i started this tread...to see if we could convert this cab for our kaisers...
Question asked and answered. Redundant thread closed.
OK, here's the thing.
I'm sure most of you have stumbled upon the XBmod Manila HD port for the Diamond: http://forum.xda-developers.com/showthread.php?t=470164
If not, take a look.
Anyhow, I'm using an unbranded HTC Touch Pro with a stock ROM. The installation goes through nicely, and asks for a reboot.
After it reboots, the loading icon shows up for a minute, and then I'm getting an error regarding the Loader.exe. If I press details, it says that some files are missing, but does not mention which files.
My question is: has anyone successfully installed and is using the Manilla HD on a stock ROM Touch Pro?
Any ideas on what may be the difference between the Diamond and Touch Pro that could cause this issue?
Thanks!
the only problem is when you flip to landscape, it still tries to display portrait. this ca n be fixed by opening the program you want in portrait, then slide out keyboard, it will flip to landscape. then when you're done, flip back and exit. if you've got some patience, herg is working on hd manila specifically for tpro. can be found here:
http://forum.xda-developers.com/showpost.php?p=3169896&postcount=825
vader165 said:
if you've got some patience, herg is working on hd manila specifically for tpro. can be found here:
http://forum.xda-developers.com/showpost.php?p=3169896&postcount=825
Click to expand...
Click to collapse
That's good to know! I can wait... the version will probably work better with th TP anyhow.
Thanks for the info!
Spec's
Sprint Touch Pro Jigga's ROM...
HD Manila runs just fine, even installed the extra tab cab XBmod had going...so now got's me 15 tab HD.
Stocks are nice, and he's stretched the weather out a bit...
I did miss Jigga's cooked in Zoom In / Zoom Out Text, so I re-installed that from the customizing TF3D thread, and can report that this does work on HD...
Good Stuff!
I never installed the loader or anything, just make sure your on-screen keyboard is open when you are about to hit ok to activate TF3D as your today screen plugin. Pop's up in about 5-seconds...
l8r
chAz15 said:
Spec's
Sprint Touch Pro Jigga's ROM...
HD Manila runs just fine, even installed the extra tab cab XBmod had going...so now got's me 15 tab HD.
Stocks are nice, and he's stretched the weather out a bit...
I did miss Jigga's cooked in Zoom In / Zoom Out Text, so I re-installed that from the customizing TF3D thread, and can report that this does work on HD...
Good Stuff!
I never installed the loader or anything, just make sure your on-screen keyboard is open when you are about to hit ok to activate TF3D as your today screen plugin. Pop's up in about 5-seconds...
l8r
Click to expand...
Click to collapse
Hi can you post the cab from Jigga, please?
Thx in advance
Why not just run the new TF3D2 on your phone instead...
http://forum.xda-developers.com/showthread.php?t=493531