I'm still trying to figure out why I cannot get the TouchFlo up gesture to work on my TyTN II. I'm trying to use TouchCommander, but also installed and looked at Slither's Cube. I absolutely cannot get the up gesture to open either software. Once running on the screen, TC and Slither's Cube work with left, right and down gestures, but not the up gesture.
I've concluded that somewhere along the line I 'broke' something on my TyTN. Can all of you who have successfully installed and are using either TC, Slither's Cube or duttythroy Cube tell me what apps are in your Startup folder? Other than a shortcut to start FTouchFlo is there another (or different) TouchFlo app in the Startup folder? Also, can you tell me what version of FTouchFlo you have installed? I see versions 1.0, 1.1, 1.2,1.3, 1.4 and 1.4.1 are available.
While I am able to use TC by mapping a softkey to it, I really would like to figure out how to use the up gesture to start the app.
Thanks in advance.
-Bob-
Man, is no one using one of the 3 TouchFlo apps I listed???? I'm just trying to figure out why I can't get the up gesture (open) command to work. Please, please, please, just tell me what files are in your Startup folder. Then I will stop bugging you all.
-Bob-
Related
I use the commercial TouchCommander software on my TytN II. It does what I want it to do EXCEPT for the Swipe Up command. I cannot open TC with a gesture. Does anyone use TC with the TytN II that can open it with the Swipe Up gesture? If so, did you tweak any settings like the Delay or GestureWaitingDelay setting in FTouchFloConfig.txt? MobilityFlow claims that the Swipe Up works for most of their customers; am I alone with this issue?
rebecker said:
I use the commercial TouchCommander software on my TytN II. It does what I want it to do EXCEPT for the Swipe Up command. I cannot open TC with a gesture. Does anyone use TC with the TytN II that can open it with the Swipe Up gesture? If so, did you tweak any settings like the Delay or GestureWaitingDelay setting in FTouchFloConfig.txt? MobilityFlow claims that the Swipe Up works for most of their customers; am I alone with this issue?
Click to expand...
Click to collapse
If you have the latest 2.1 version it works. Make sure you hav a tflo shortcut in startup folder. Also, consider the cube by Slither2006. I bought TC & now don't use it b'cause Slithers app is tons better with equal or less mem consumption. At least with beta 8!
GSLEON3 said:
If you have the latest 2.1 version it works. Make sure you hav a tflo shortcut in startup folder. Also, consider the cube by Slither2006. I bought TC & now don't use it b'cause Slithers app is tons better with equal or less mem consumption. At least with beta 8!
Click to expand...
Click to collapse
OK, a couple questions:
1. Are you saying that a shortcut to FTouchFlo.exe or FTouchFlo.TC.exe should be in the startup folder? It's not. You'd think the TC install would put it there.
2. Where do I find Slither's Cube? I tried a version of the Cube a while back and found it very user-UNfriendly. I'd like to give Slither's version a try.
Thanks.
-Bob-
http://forum.xda-developers.com/showthread.php?t=336234 thats where you can find Slither's HTC Cube Clone
dolbe said:
http://forum.xda-developers.com/showthread.php?t=336234 thats where you can find Slither's HTC Cube Clone
Click to expand...
Click to collapse
Still looks pretty user-UNfriendly to me. Way too many gotchas from my point of view.
TC works fine except that I can't get the up gesture to open the app. I'd really like to solve that issue. Unfortunately, MobilityFlow is pretty much unreceptive to my questions about this issue. I suspect that I removed some vital component in my Startup folder that is needed for the TouchFlo feature. Here's what is in my Startup:
btdwake
CommLoader
PKG
Pocket PROMT Launcher
prssrsrv
RefreshStartMenu
sddaemon
Services
What's missing?
Thanks.
-Bob-
im using an att tilt and have installed the touchflo cube cabs but all i get is the error message that touchflo is already running, yet i dont see it. Which cabs are recommended to be installed or im a doing something wrong
Krizmo67 said:
im using an att tilt and have installed the touchflo cube cabs but all i get is the error message that touchflo is already running, yet i dont see it. Which cabs are recommended to be installed or im a doing something wrong
Click to expand...
Click to collapse
Touch Flo runs in the background and when you install the cube you end up with a double installation. Go into your touch flo settings and uncheck enable touch flo and then do a soft reset. Then use the screen swipes to run the cube as normal.
Will try it!
Thank you Denco7!
Hi,
Right been doing some digging around the forum to try to get to grips with how to use Touchflo on my Kaiser (Vodaphone v1615 WM6.1 build), but haven't really found an answer. I can see an icon in settings for Touchflo that just says enable sound when scrolling, but i don't get any other options to enable it.
How do i enable default HTC (cube) touchflo on my Kaiser? or is it not part of the Tytn2 standard build? I have tried Ftouchflo which works, but am after looking at default HTC stuff before looking at other implementations etc as the ftouchflo stuff didnt quite work as i wanted.
Thanks in advance
Drew
Drewbie said:
Hi,
Right been doing some digging around the forum to try to get to grips with how to use Touchflo on my Kaiser (Vodaphone v1615 WM6.1 build), but haven't really found an answer. I can see an icon in settings for Touchflo that just says enable sound when scrolling, but i don't get any other options to enable it.
How do i enable default HTC (cube) touchflo on my Kaiser? or is it not part of the Tytn2 standard build? I have tried Ftouchflo which works, but am after looking at default HTC stuff before looking at other implementations etc as the ftouchflo stuff didnt quite work as i wanted.
Thanks in advance
Drew
Click to expand...
Click to collapse
RTFM
Ta
Dave
Drewbie said:
Hi,
Right been doing some digging around the forum to try to get to grips with how to use Touchflo on my Kaiser (Vodaphone v1615 WM6.1 build), but haven't really found an answer. I can see an icon in settings for Touchflo that just says enable sound when scrolling, but i don't get any other options to enable it.
How do i enable default HTC (cube) touchflo on my Kaiser? or is it not part of the Tytn2 standard build? I have tried Ftouchflo which works, but am after looking at default HTC stuff before looking at other implementations etc as the ftouchflo stuff didnt quite work as i wanted.
Thanks in advance
Drew
Click to expand...
Click to collapse
The cube was/is not part of the official build.
Thanks for that..i did read the wiki but just wanted some clarification as to be honest wasn't 100% clear to me .
Drewbie said:
Thanks for that..i did read the wiki but just wanted some clarification as to be honest wasn't 100% clear to me .
Click to expand...
Click to collapse
Let you off then
Ta
Dave
Right been having a bit of a play...and think i need some further help lol. At the moment I haven't installed the HTC Cube (found links for it elsewhere on the forum) and am just playing with the finger scrolling. Out of the box i can't scroll in contacts or calendar etc but have installed Opera 9.5 and that works a treat...not sure if thats part of Touchflo support or anything .
I then installed FtouchSL (Trial version) and get scrolling working (though it says it will disable Touchflo scrolling) in contacts, but not calendar (i.e left right to go through days etc). Then Opera 9.5 does not work with finger scrolling at all.
I have now removed FTouchSl and wondering how i get scrolling to work with inbuilt Touchflo? I would like to be able to finger scroll through contacts and calendar for example.
Cheers
Drew
Drewbie said:
Right been having a bit of a play...and think i need some further help lol. At the moment I haven't installed the HTC Cube (found links for it elsewhere on the forum) and am just playing with the finger scrolling. Out of the box i can't scroll in contacts or calendar etc but have installed Opera 9.5 and that works a treat...not sure if thats part of Touchflo support or anything .
I then installed FtouchSL (Trial version) and get scrolling working (though it says it will disable Touchflo scrolling) in contacts, but not calendar (i.e left right to go through days etc). Then Opera 9.5 does not work with finger scrolling at all.
I have now removed FTouchSl and wondering how i get scrolling to work with inbuilt Touchflo? I would like to be able to finger scroll through contacts and calendar for example.
Cheers
Drew
Click to expand...
Click to collapse
Leave off the FTouchSL for now. Find and install schaps advanced config and set make sure TouchFlo is enabled in there. My contants works with Finger Scrolling. My current calender is TouchCal and that is already FF (Finger Friendly) you can try it for nowt. Opera I think has it's own touch scrolling.
Also try pocket CM as a FF contacts app. Or install HTC Random Access, this adds FF letters into normal contacts.
Ta
Dave
Thanks Dave will give that a try
I've tried searching but found nowt. is there a program that can switch touchflo 3d interface off and on with one touch? I know it can be done through today items but I'm looking for a one
tap method.
cheers, cojo
I have Touch-Flo 3D running inside Ilauncher with no major issues, I needed my PocketBreeze meaning more Today-plugins, this way it's possible...only one tap back and forth
thanks. I'm looking more for something that removes it from memory to free up resources.
Flipside said:
I have Touch-Flo 3D running inside Ilauncher with no major issues, I needed my PocketBreeze meaning more Today-plugins, this way it's possible...only one tap back and forth
Click to expand...
Click to collapse
I didn't know you can do that... Would you mind posting a screen cap?
i'm interested too, since manila needs the whole space .. i don't know, where the ilauncher tabs should be placed
I want to be able to scroll through touchflo 3d with the capacitive wheel but can't seem to find any programs that will let me do that. I tried Diamond tweaks and Diamond Scroll but none of those programs habve teh option i want. I would try GScroll but ive been hearing about alot of crashing problems.
I don't think there is. I know people have tried and failed. It seems that TF3D is hardcoded that way, but who knows. Someone might make a breakthrough! I know Da_G is the master of hex editing
man... i used to have a program that allowed this function. It worked PERFECTLY, but i had to hard-reset my phone, and forgot to back that up. I'll try to get in touch w/ the person who gave it to me, and see if I can help you out!
Tekka said:
I want to be able to scroll through touchflo 3d with the capacitive wheel but can't seem to find any programs that will let me do that. I tried Diamond tweaks and Diamond Scroll but none of those programs habve teh option i want. I would try GScroll but ive been hearing about alot of crashing problems.
Click to expand...
Click to collapse
FWIW I use GScroll, and haven't had any problems with crashing (either it, or other programs).
Cheers,
Steve.
diamond tweak give u the option to enable it at some applications (calander, call history, contacts, file explorer, internet explorer, programs, phone & ofcourse diamond tweak itself).