Database Develop

Advanced Config vs. KasierTweak?

Does KaiserTweak give me anything that AdvancedConfig does not (and vice versa)? In other words, should I have them both?

Been wondering the same thing, I'm only running Adv Config, they see preform the same tweaks, plus AC has the menu options to modify the items seen on the comm manager, key mapping etc.

There are a few things I have been able to access in Kaiser tweak that are not in adv cfg. I can't remember them offhand, but I do remember at least one or two or settings I normally change first. Kaiser tweak's UI isn't as "pretty" as adv cfg, but I have found it more useful for myself.
FWIW, there are also some items in adv cfg, via the right soft button IIRC, that aren't in Kaiser tweak. I never used those anyway, so it wasn't an issue for me.
Just install them both and decide for yourself which you need, or keep them both in. They are both small files. Your needs will vary, I'm sure.

can someone post a .cab for advanced config plz..since were talking about these 2 appplictions.

moegdaog said:
can someone post a .cab for advanced config plz..since were talking about these 2 appplictions.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=317070

thank you mikul..I love it when some1 responds that fast...thanks man

moegdaog said:
thank you mikul..I love it when some1 responds that fast...thanks man
Click to expand...
Click to collapse
u r welcome.
u can save your time by searching for it(just type advanced config in "search" and u have your cab), this can save u time especialy when u dont get an answer for your question

Finnaly a helpful thread(TF3D). Not the crap thats up lately.

Ok boys simple tip to make life easier:
I discovered (hopefully im not double posting):
That if you use Diamond TF3d Config (THANK YOU very much Mr. Sascha Lange) and make your changes (choose not to reboot after changes made) such as changing the date format or the tabs order (I tried it) you dont have to restart the Jewel to see the changes, just go to Today settings disable TF3D and then start it again. All the changes you made with out rebooting.
Hope this makes your life easier with the KICKS ass Jewel.
Cheers Bradassss

Well done on a thread that doesnt involve the iPhone, the Diamonds battery, or someone saying how much they hate the phone.
Well done to you sir!

Nice find mate

Sergio PC said:
Ok boys simple tip to make life easier:
I discovered (hopefully im not double posting):
That if you use Diamond TF3d Config (THANK YOU very much Mr. Sascha Lange) and make your changes (choose not to reboot after changes made) such as changing the date format or the tabs order (I tried it) you dont have to restart the Jewel to see the changes, just go to Today settings disable TF3D and then start it again. All the changes you made with out rebooting.
Hope this makes your life easier with the KICKS ass Jewel.
Cheers Bradassss
Click to expand...
Click to collapse
Of course, this involves ONLY changes made to manila, NOT the OS itself, such as "TouchFLO performance tweak x" - which tunes the FAT and GDI cache, as well as touch sensitivity.
THESE require a restart.

adwinp said:
Of course, this involves ONLY changes made to manila, NOT the OS itself, such as "TouchFLO performance tweak x" - which tunes the FAT and GDI cache, as well as touch sensitivity.
THESE require a restart.
Click to expand...
Click to collapse
You are correctooo Sir.
No preformance Tweaks just. "Cosmetic" tweaks. Tabs, date format etc....
Cheers!

I knew it all along.. lol
Perhaps you could tell Sascha to have that dialog appear instead of asking users to reboot Or better still.. have a function to automatically restart TF3D only.

MasK said:
I knew it all along.. lol
Perhaps you could tell Sascha to have that dialog appear instead of asking users to reboot Or better still.. have a function to automatically restart TF3D only.
Click to expand...
Click to collapse
Im sure Sascha knows what hes doing!
Luck Bradassss!!!

Sergio PC said:
Ok boys simple tip to make life easier:
I discovered (hopefully im not double posting):
That if you use Diamond TF3d Config (THANK YOU very much Mr. Sascha Lange) and make your changes (choose not to reboot after changes made) such as changing the date format or the tabs order (I tried it) you dont have to restart the Jewel to see the changes, just go to Today settings disable TF3D and then start it again. All the changes you made with out rebooting.
Hope this makes your life easier with the KICKS ass Jewel.
Cheers Bradassss
Click to expand...
Click to collapse
not to bust your balls or anything, but i kinda discovered that on my own while experimenting
anyhow.. at least you shared

Cooked Roms + Advanced Config cache tweaks = mega fast?

im not sure if anyone of you have this question in mind but i was wondering : the cooked roms are extremely fast already but if i add in the advanced config cache tweaks, what would happen? would it cause the phone to slow down? if cache tweaks were meant to speed up TF3D but at the same time increase the memory % used, then whats the point? since the higher % of memory used, the slower ur phone is right? im one confused guy. =( im using panoshas 1.7 full btw.

That's weird, I was just wandering the same thing mate! I'm using Swift bl v.6 though...

jeromenism said:
im not sure if anyone of you have this question in mind but i was wondering : the cooked roms are extremely fast already but if i add in the advanced config cache tweaks, what would happen? would it cause the phone to slow down? if cache tweaks were meant to speed up TF3D but at the same time increase the memory % used, then whats the point? since the higher % of memory used, the slower ur phone is right? im one confused guy. =( im using panoshas 1.7 full btw.
Click to expand...
Click to collapse
I asked Panosha about this... Advance config "WILL" interfere with his performance settings.! If your using his rom then i would not install advance config..! I too is using shine on 1.7 and to be honest A/C does the rom NO justice, I think it runs perfectly without it...!
Shine on 1.7 makes my Diamond *ping*

Why can't he install advanced config? He doesn't necessarily need to mess with performance settings, it has lots of other useful things...

simcarloc said:
Why can't he install advanced config? He doesn't necessarily need to mess with performance settings, it has lots of other useful things...
Click to expand...
Click to collapse
But I'm not sure if a/c loads all its reg settings into memory.. If so then all settings surly would be saved even if you don't make any...? As i said i'm not really sure on this so I'm asking about myself.. if you don get info please do lets us know...!

Well, as i'm using Swift, I don't need to worry as it came with advanced config anyway. I have not messed about with much though - I have only turned on all power management settings and stopped the delay when I hang-up a call.
Interesting thread actually.

simcarloc said:
Well, as i'm using Swift, I don't need to worry as it came with advanced config anyway. I have not messed about with much though - I have only turned on all power management settings and stopped the delay when I hang-up a call.
Interesting thread actually.
Click to expand...
Click to collapse
I guess when a chief incorporates a/c into their roms then they are taking this issue into account...!
The one thing i have noticed with Advance config is no matter what cooked rom I'm using, when launching a/c for the first time it always has defaults settings, so if a cheif has made performance settings to their roms then why don't a/c show them... this why I'm holding back from using it till i get a full picture.
P.s Totally interesting...!

fyew-jit-tiv said:
I guess when a chief incorporates a/c into their roms then they are taking this issue into account...!
The one thing i have noticed with Advance config is no matter what cooked rom I'm using, when launching a/c for the first time it always has defaults settings, so if a cheif has made performance settings to their roms then why don't a/c show them... this why I'm holding back from using it till i get a full picture.
P.s Totally interesting...!
Click to expand...
Click to collapse
actually i disagree with you there. i have noticed on different ROMS that the initial settings shown on A/C are in fact different which can only mean that the ROM tweaks are over riding the A/C setings, thats is until you adjust it & do a soft reset.

gtpete said:
actually i disagree with you there. i have noticed on different ROMS that the initial settings shown on A/C are in fact different which can only mean that the ROM tweaks are over riding the A/C setings, thats is until you adjust it & do a soft reset.
Click to expand...
Click to collapse
Confused.... When i have installed Roms and used a/c to check its all ways been default settings...! more research needed...!

thats why im afraid that A/C or TF3D Config or stuff like that would interfere with the rom! damn it, i thought that 1.7 was slow but actually its due to advanced config.. haha looks like im going to flash back!

yea actually i do realise that a/c's settings are always set to default..

i thought when A/C 1st starts it reads all the appropriate registry entrys and marks them as the default value!

hey guys...
.. anyone got an answer to this questions until now?
would also be interested...
my feelings tell me, a/c does change the existing configs...
but i'm not really sure..

Typing too slow

I find that my phone can't keep up with typing when I'm writing an SMS. I don't think I type that fast but it constantly has to catch up, the screen is usually 2 or 3 words behind me when I type.
I'm using the stock MMS program MMS Composer Version 5.2.0.22. Can anyone recommend some other MMS program or some tips on how to improve it's speed. The program itself is slow in general as well, constantly freezes for a few seconds and stuff like that.

Very strange!...

Also, this the second X1 I've had and both do the exact same thing.
Any suggestions?

\HKCU\ControlPanel\Keybd\InitialDelay
check that value and maybe decrease it (e.g. to 0), not sure if it helps but worth a shot

yinjianweizxc said:
Very strange!...
Click to expand...
Click to collapse
A* for your contribution to solving the problem!
and i'd install Advanced Config and increase some of the performance settings there like the glyph cache to 32KB and File System Cache to 8MB and filter chahe to 16384
This worked for me so might be worth a try

Draken, just tried that and it didn't help. It may have helped a bit but still lags behind quite a bit.
comeradealexi, I've had all those settings turned up for months so I can't do that.
I hope someone can help me fix this.
I may just want to flash my phone but I can recall when I did it with my last X1 it didn't help.

http://ip208-100-42-21.static.xda-developers.com/showpost.php?p=6185438&postcount=1

Getting the best out of your newly flashed rom.(guide to maxing out your xperia)

Most roms are really good in performance right after flashing but sometimes the performance dwindles, or performance was never satisfactory at all. So i present to you all the the names of all the tools, recommendations and help you need to make that rom work better than even the cook intended (i will not provide any links this is something you should work for).
now the list!!!!
1. Omnia d3d driver (best video driver ive found)
2. Xperia tweak 1.9 (2.0 doesnt work well on all cooked roms)
3. Chainfire-turbo 3d (makes a small difference)
4. removed
5. Ramdisk_WinCe (creates a virtual storage device on your memory card for
temp files)
6. Tnynt Sd tuneup(speed up mem card)
7. Advanced_configuration_tool (performance tweaks)
8. Speedbooster (set processor priority to an app)
9. Sdk certs 2015 (certs for applications that need them)
10. Soundboost (understandable)
11. Quick menu (faster menu access)
12. Pagepool editor (change the system cache size to affect
performance)pre flashing the phone
13. Sk tools.
After you looked for all these you probably dont know how to use some of them soo ill provide a guide for our hard work (congrats)!!!
Before the guide i should warn you. Not all roms have enough space to handle all this or work well with them... honestly go with a light rom and work your way up so its customized to you.
The roms i really loved using and would recommend are jacks 6.5 medium, 826x with cookie and the x2 rom by russel eclair all three really great roms (x2 rom has slideview!!!)
now the guide although most of them are on the thread some of them are confusing. in the guide d.i.r means download install reset.
1. just download the omnia d.i.r
2. download and install experia tweak go to the second set of options max both
caches.
3. d.i.r
4. removed
5. d.i.r go to ramdisk from menu tap right softkey, go to settings change the
following size 32. change from 16 to 32 bit. check all the boxes.
6. d.i.r
7. xperia tweak does it already but to change wifi to stay on until you take it off
go to menu, connections, enable the checkbox press done reset.
8. you have to buy this app but its worth it . tap processes max file all except
the last 2. or max all the system processes eg gwes filesystem.
9. d.i.r
10. d.i.r
11. d.i
12. download, unzip, run on pc , locate where desired rom is and change to
between 20 to 30.
13. d.i these have all the tools to keep your phone as close to peak
performance as possible...also has a benchmark for all those who want to
see what the difference was before and after all the work.
Congrats!!!!! your phone runs how it supposed to!!!!!!
I would love the honour thanking all the people here that made these apps
possible and to the cooks who work hard to please us at xda!!!!
And to you whose love for the xperia x1 fuels them!!!!
i am no longer showing how to overclock on this thread due to lack of real testing time. If you are still interested in overclocking google overclocking xperia with msm and read up on it!

great work man,i absulotly agree with you about those 3roms,i used russel eclair,its phenomenal,i loved the slid view even its lag somtims,we hope to see more news from russel.

elharraq said:
great work man,i absulotly agree with you about those 3roms,i used russel eclair,its phenomenal,i loved the slid view even its lag somtims,we hope to see more news from russel.
Click to expand...
Click to collapse
Thanks!!!! i hope so 2!!! currently using jacks 6.5 medium because i wanted sense and i wanted to install the x2 dailer

big thanks to this!
yup, totally agree on your ROM suggestions.
though I'm sticking with Jack's v5 lite since I don't feel the need for sense.

biernes_atrece said:
big thanks to this!
yup, totally agree on your ROM suggestions.
though I'm sticking with Jack's v5 lite since I don't feel the need for sense.
Click to expand...
Click to collapse
No biggie just trying to help out however i can, want to get into cooking and include all of the above!!!!! 3 versions all completely clean!!!! software would be provided as cabs so you dont have stuff you dont want!!!! the three versions would be sense, panel manager and titanium all customized to the sony ericsson look.
I asked cooks if they wanted the idea but got no response so ill take it into my own hands.
Btw enable gmode cab speeds up wireless connection

thanks for your suggestions. they went a long way in solving a few issues i had. now my xperia runs as i would like it too.
Many thanks for your suggestions.

great tips , but have anyone link to xperia tweak 1.9 becouse 2.0 doesn't work on my rom (826x)..

fil--21 said:
great tips , but have anyone link to xperia tweak 1.9 becouse 2.0 doesn't work on my rom (826x)..
Click to expand...
Click to collapse
http://www.freewebs.com/henkenelson/XperiaTweak19.CAB

sirkula said:
http://www.freewebs.com/henkenelson/XperiaTweak19.CAB
Click to expand...
Click to collapse
tnx man ...

At first I bought the x1 because it had a keyboard and touchscreen. I never thought it'd be this powerful, what a bargain. xD

I think w'lle **** up our phone's preformance and stability by installing al those applications, the less the applications the better

Lunie said:
At first I bought the x1 because it had a keyboard and touchscreen. I never thought it'd be this powerful, what a bargain. xD
Click to expand...
Click to collapse
darn right! i usually change phones almost yearly. my x1 is now past it's 2nd year already and still kicking arse.

samsamx said:
I think w'lle **** up our phone's preformance and stability by installing al those applications, the less the applications the better
Click to expand...
Click to collapse
if we had proper drivers we wouldnt need all these apps but if you know of an app that boost all the important stuff please share!!!!! (btw any app can mess up your phone if your dont use it correctly)
also im usin all this for a week with no probs (hence why i suggested roms lol)

if anyone encounters problems let me know !!!!!

wtf!!!!! i just benchmarked my xperia and got 6573 in draw bitmaps!!!! i dunno how the hell i got there though........ im goin to run it again and if its that high again ill backtrack and post my config
ok i ran it over and the results came back to its normal 752-810 range, but if i take off the screen while it goes on it jumps to 4000 and higher probably because the screen has nothing else to focus on. so sadly we are not that epic yet

e1rokr said:
1. Omnia d3d driver (best video driver ive found)
3. Chainfire-turbo 3d (makes a small difference)
Click to expand...
Click to collapse
Samsung Omnia is reference driver, not a real driver.
Try to runing Lights.exe he will tell you a lot.
Best driver is only d3dm_ati.dll from Topaz of the X2driver.cab.
Or it so with my ROM.

jorobg said:
Samsung Omnia is reference driver, not a real driver.
Try to runing Lights.exe he will tell you a lot.
Best driver is only d3dm_ati.dll from Topaz of the X2driver.cab.
Or it so with my ROM.
Click to expand...
Click to collapse
Ok cool .Thanks!!!! Didnt know that....so i have installing to do yay!

google overclocking xperia with msm i am no longer showing how to overclock

biernes_atrece said:
darn right! i usually change phones almost yearly. my x1 is now past it's 2nd year already and still kicking arse.
Click to expand...
Click to collapse
Me too (that's why I still check the X1 forum right now....). It's not I don't want a change. I just can't find a better phone for me right now. e.g. AT&T 3G network and GPS capacity (iGo8 with TMC).
For OP, be warned to verify your video driver with this tool (all credit to ultrashot) as many drivers would screw up if you don't know what you are doing. Normally, I won't recommend to replace the dll afterward since dll being cooks in as module (if the cook knows how to do it right) is faster and use less memory. Read "What's the take-home message about VM? by Da_G"
For my rom's user, some of tricks OP mentioned already built in and configured (except the lite version). (For pagepool, don't believe the hype 0 = auto manage as I found 24mb is the bare minimal for multiple big apps to run concurrently)
5. Ramdisk_WinCe (creates a virtual storage device on your memory card for
temp files)
6. Tnynt Sd tuneup(speed up mem card)
9. Sdk certs 2015 (certs for applications that need them)

jackleung said:
For OP, be warned to verify your video driver with this tool (all credit to ultrashot) as many drivers would screw up if you don't know what you are doing. Normally, I won't recommend to replace the dll afterward since dll being cooks in as module (if the cook knows how to do it right) is faster and use less memory. Read "What's the take-home message about VM? by Da_G"
Click to expand...
Click to collapse
I agree with Jack!