Related
Anyone know how to add these icons on traybar just like Schap's ROM ?
applications called: Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)
I dont want to use homeplug or other trayluncher, thanks..
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
no one can answer me?
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
For the power, try this. Make a shortcut of the exe file in windows\startup folder.
optiquest said:
no one can answer me?
Click to expand...
Click to collapse
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliĆ”
research12 said:
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliĆ”
Click to expand...
Click to collapse
really thanks, but what I need is Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar),
idea from Schap's ROM (for Hermes), hope someone can tell me how to do that to support on Kaiser ....
check here: http://forum.xda-developers.com/showthread.php?t=338946
RGDs, Optiquest...
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
patr!k said:
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
Click to expand...
Click to collapse
You dont get what I mean, i dont want any tray launch,
this application is called "Schap's Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)" , develop by Schap, just only need power_srv.dll and wirelessMgr_srv.dll and enable some register keys...
besides, this Wireless service Manager = WIFI+BT+Flight mode in a icon..
so now, u know what i mean now??
and sorry for my poor english...
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
patr!k said:
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
Click to expand...
Click to collapse
in fact, I got these 2 dlls from Schap's ROM and copy them (include power.exe) into my TYTN II, then import these 2 reg keys, now there r two icons on my kaiser's traybar, but, but, when I enable WIFI/BT/Flight mode,
only WIFI/Flight mode's icons show instead of wireless icon, so maybe need other dll reg. key i havn't found ...
I have asked Schap several times, even pm him, but still no answer, pity....
so only i can do is ask professional persons here...wow -_-
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
patr!k said:
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
Click to expand...
Click to collapse
everything woks fine on my kaiser...
ps: i use chinese version, and run on SD...
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
advancedconfig.exe
invalidcastexception
at system.convert.toInt32
iat advancedconfig.
at advancedconfig.
at system.windows.forms.form.onload
at system.windows.forms.form._setvisiblenotify
at system.windows.forms.control.set_visible
at system.windows.forms.application.run
at advancedconfig.
Click to expand...
Click to collapse
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
patr!k said:
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
Click to expand...
Click to collapse
I had problems like u before when i use Hermes..
Have u changed CommManager's details? or try to disable HTC home and try again..
ps: I use standard WM6, use its build compact framework..
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
patr!k said:
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
Click to expand...
Click to collapse
if I change commManager in Advanced config (eg: add 3G or del something etc), next time when I reboot pda, I will get some error there...
Advanced config for me is useless except enable cleartype, so I think KaiserTweak will be better when I want to change somethiing in Registry.
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
krakout said:
Hello,
For the past few days the (from what I gather) well-known problem of not being able to install or run an 'untrusted' application has been plaguing me. However, I've been searching here and googling around for a long time now with no result...
Been using Dutty's 5.2.19199 (WM6.1) and I really didn't change any setting! So what gives? Any ideas?Basically, how do I get the prompt back (the one during installation)?
Thanks in advance!
T
Click to expand...
Click to collapse
Check your registry settings! Use KaiserTweak or Schaps' AdvanceConfig!
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
krakout said:
Yes, I know it must be something in the registry, but what? And, I thought of Tweak and AdvanceConfig but -guess what? They're not authenticated! Argh!
Click to expand...
Click to collapse
If you are technical, try this: Download KaiserTweak's latest XML file and open the file in Notepad. Then see what registry key(s) is(are) modified for this tweak.
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
If you're really technical, you can follow through with cmonex's way found here.
If not, search for dot fred task manager, which includes a great *FREE* registry editor amongst other tools, much better than PHM Reg Editor, imo....
Whoa, thanks a bunch. I'll try the task manager first (found here, btw), but I'm not sure if I'll be able to run it either - the whole system seems VERY restricted! I'll try to make heads from tails with the instructions in the other thread. Thanks so much!
Btw, I do seem to remember a program that allowed you to edit the PPC's registry from Windows PC, anyone remember that?
Thanks again guys - much, much appreciated!
You can run the untrusted app, i.e. Advanced Conig. Just select yes. Then make the changes.
BTW, to view the xml, just Open notepad on pc & drop the xml in the notepad window.
No I can't that's my problem - it just flat refuses to run it, it doesn't give me the prompt.. that's why I'm asking for a PC-based registry editor!
Anyhow, I'll try it today and will let you know if I manage it!
krakout said:
Ah now - that's a great idea! But, do you know of any PC-based registry editor, since I cannot install one on my TyTNII?
Click to expand...
Click to collapse
http://www.pocketpcfreewares.com/en/index.php?soft=1399
Here is another PC based mobile registry editor. Simple to use and works well. Havent found any serious problems with it
Yes, I'm trying this right now
Btw, the registry setting seems to be:
HKLM\Security\Policies\Policies\0000101a
Value=1: disabled
Value=0: enabled
Desc.:Enable or disable the warning you get when opening a program that is not digitally signed
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Carty said:
A small cab to disable signing-security: Download: http://www.PocketPC-Live.com/ds.cab
Try it and let me known..
Click to expand...
Click to collapse
The problem with this cab (and another one I had found) is that, once the mobile goes berzerk, you can't install it because, of course, it's unsigned... Catch 22! Thanks anyway - and, by the way, superb site, added to my RSS aggregator at once!
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
krakout said:
..by the way, superb site, added to my RSS aggregator at once!
Click to expand...
Click to collapse
Thank you My pleasure to serve the pocket pc community..
krakout said:
Anyhow, I just applied the reg tweak (set to 0), reset, thing asks me to verify running unsigned start-up programs, I OK them, and then... still same problem! What the heck? There doesn't seem to be any other tweak...
Click to expand...
Click to collapse
It has to be set to 1 for disabling.. You set to 0?
Regards,
Carty..
Yes, I set it to 0; it was set to 1 (probably an earlier KaiserTweak session), but I actually wanted to get the prompt so that I could tell it that f*cking yes, I want to run/install the app!
Anyhow, been switching between 0 and 1 with no effect... Feel a hard reset coming on, but it's weird because I've found quite a few posts around (not necessarily here) and no solution...
Got the same problem after a white screen after hardspl, but changing the registry worked for me. Thanks, now I can try jumpspl.
is there a way anyone can add more then the default 18 programs into the programs tab in tf3d
thanx guys
anyone????
Go to your registry: HKLM\Software\HTC\Manila\ProgrammLauncher\
There are entries from 0 to 17, you could add more but some ppl report problems with it!
k thank you
how do i add more entries???
What would be super-neat is if you could add a tab for each swipe, so a left swipe gave you another page, up swipe, down swipe and right swipe all gave their own page as well.
You could have office stuff-up, system stuff-down, fun stuff-right, media stuff-left or something. That'd rock.
No idea if thats possible though, I couldn't code my way out of a wet paper bag :>
Cheers for the tip, i'll try it.
riverer said:
What would be super-neat is if you could add a tab for each swipe, so a left swipe gave you another page, up swipe, down swipe and right swipe all gave their own page as well.
You could have office stuff-up, system stuff-down, fun stuff-right, media stuff-left or something. That'd rock.
Click to expand...
Click to collapse
That would be really great! Maybe someone can do this. I'm not familiar with programming for win mobile.
i would love for someone to answer my question!
I didn't figure out how to add them either, looked a bit complicated to me. If you could copy-paste-rename the entries already there it'd be easy but me reg-editer didn't allow me to do that.
same with mine :-( please someone help!!! with a link to a better reg editor
Not as easy though
htcfanboi said:
same with mine :-( please someone help!!! with a link to a better reg editor
Click to expand...
Click to collapse
Hi guys,
I just tested this , if you add new Keys (18/19 etc ) to the registry , tf3d will
display the additional empty slots , will allow you to select a program for them , but will not
save your changes ... i.e. these will always remain empty .....
Even if you change it from the registry and add a program in a new slot manually .... tf3d will ignore that
So there must be a different place ( or hardcoded in manila.exe ) which needs changing too
i dont understand what you are saying???
htcfanboi said:
i dont understand what you are saying???
Click to expand...
Click to collapse
Huh , I didn't think my english was that bad
If you edit the registry and add Keys for additional buttons , TF3D will show them ( as empty ) but they will not work ... I.E. you can't assign any program to the buttons you added
So the registry hack alone is not enuff
Garfield1970 said:
Huh , I didn't think my english was that bad
If you edit the registry and add Keys for additional buttons , TF3D will show them ( as empty ) but they will not work ... I.E. you can't assign any program to the buttons you added
So the registry hack alone is not enuff
Click to expand...
Click to collapse
Your english was perfectly fine
ok but may i ask what registry edit you used
Hi everyone. I have the HTC Touch Pro and I was wondering if there is a way to let the scroll wheel acts like the one on ipods in order to navigate through the songs instead of finger scrolling. It would be easier and quicker I think.
use the diamond tweak program it has the option to do that
lbhocky19 said:
use the diamond tweak program it has the option to do that
Click to expand...
Click to collapse
Which program?
it is called diamond tweak
i have download it but its kind of complicated the menu.
may be i am too stupid to use it.
chemical349 said:
i have download it but its kind of complicated the menu.
may be i am too stupid to use it.
Click to expand...
Click to collapse
Now Now... we may aswell be nice on this forum... we have members of varying abilities... Remember everyone is special.
Just search for Diamond Tweak... copy the cab to your memory card. double click to install it your device - I suggest you install it on your memory card to save memory on the device itself...
Reset and open the new program (which should be found in your "programs page" near the end of the list you will find the option to set the wheel to scroll.
I hope this helps.
Rgs,
J
thanks man,
i think i was kind of mislead by the previous thread.
the subject was ask about how obtain more function for the scroll wheel and the answer follow seems to be suggesting the tweak.
infact the diamond tweak is much more powerful then just to enhance the scroll function. the other functions was quiet useful indeed.
wish everyone like it as i do.
V.
scroll wheel
lbhocky19 said:
use the diamond tweak program it has the option to do that
Click to expand...
Click to collapse
I also have the touch pro, and have installed the tweek. all programs are enabled to scroll which they all do except file explorer?? any insight??
check out advanced config...open it, go to menu>more settings>smart touch. from there you can add any easily add any active program to enable usage of the smart touch/scroll wheel or see if its listed in the predefined programs. you can also adjust the sensitivity of the scroll wheel here..
scroll wheel
civicvx94 said:
check out advanced config...open it, go to menu>more settings>smart touch. from there you can add any easily add any active program to enable usage of the smart touch/scroll wheel or see if its listed in the predefined programs. you can also adjust the sensitivity of the scroll wheel here..
Click to expand...
Click to collapse
Im still a little grey I guess, on my advanced config there is no option for >more settings> smart touch. is there a newer version that im not using???
i seam to have the same problem everything enabled but no scroll wheel any ideas thanks
i use this for scrolling, mine only work on the windows menus but i didnt enable it with Diamond tweak
also you cant uninstall this unless you hard reset, i figured i would let you know before you install it
i did not create this i am simply reposting it credit goes where credit is due
I had the scroll wheel working with the diamond tweak, have since had to hard reset and now I can not get it to work for any programs. It's drivin me nuts. Please help me out guys.
Just had it working in diamond tweak, I exited and tried it in file explorer, no luck so I went back to diamond tweak and its not working for that no either. wtf
I don't need all 18 icons in the programs tab and was wondering if there was a way to remove some of them. Im really trying to simplify the layout of the phone and would like to have only 2 or 3 if possible. Advice or help?
bump for some help
A C
Try Advance Configuration tool
You could edit your registry. First you have to go to the key [HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher]. There you can delete all numbers exept 0, 1 and 2. It will look like in the picture that I've attached. You could backup the registry key before deleting all the icons you don't want to have.
Try.....http://forum.xda-developers.com/showthread.php?t=405749
d12bn said:
Try Advance Configuration tool
Click to expand...
Click to collapse
With Advance Configuration Tool the program tab can't be edited/changed.
band27 said:
Try.....http://forum.xda-developers.com/showthread.php?t=405749
Click to expand...
Click to collapse
With TF3D Config you can edit the program tab but it's totaly unnecessary doing it this way cause this also can be done at the program tab when clicking the remove softkey there. And at the end I guess both programs won't help yesteryear because you will still have 18 icons on the program tab and he only wants 2 or 3 icons. Only way to accomplish what he wants is the registry tweak I suggested.
Thanks for the replies Registry edit it is. Hope I'll be ok doing this. I have flashed new roms already so this should be fairly easy....I hope
Easier than I thought. I used CeRegistry Editor. Really nice to work from my desktop. Again, thanks
yesteryear said:
Easier than I thought. I used CeRegistry Editor. Really nice to work from my desktop. Again, thanks
Click to expand...
Click to collapse
You're welcome. CeRegEditor is nice to work with.
Sure did work. Just a note for those who are thinking about doing this as well... I tried to use the 3, 4, 5 shortcut tabs only , meaning the middle row of shortcuts and it froze up Touchflo 3d. Couldn't load it properly I guess. For some reason the startup wants to see at least one icon in the first row. Does that make sense. By the way Im using
check out TF3D Config.. does it all..
Sage said:
check out TF3D Config.. does it all..
Click to expand...
Click to collapse
You only can hide the programs tab with TF3D Config. That's not what he wanted. He wanted less program icons on the programs tab.