I downloaded the last version for the touch cruise, but it does not work , when I filled out the rigiter screen it says password is wrong, but with my Nokika N82 there is no problem using my account settings.
anybody has fring running on Diamond?
I installed and select "Touch Cruise" as device, but install on Diamond and it works fine, only that need to do soft reset first!
Fine on my Diamond
Works fine here to...
oddball1 said:
Works fine here to...
Click to expand...
Click to collapse
by me it does not work I use the same
account settings as in my N82 and It tells me that the password is wrong...****,,,ups sorry
oddball1 said:
Works fine here to...
Click to expand...
Click to collapse
I installed it again and made a soft reset at once....thx now it work....but it started with my phone at first ? automatically....is this right?
regards
herby
Related
I have installed it on my diamond and when you press on the icon to load nothing happens! Anyone got it to work? Cheers
I installed it to the internal storage and have used it successfully.
Works quite brilliantly.
Try removing and reinstalling.
Tried that. Weird. Which version are you using? I have the latest version d.
Works perfect, expecially OCR at chinese font. You need to take photo vertically.
works fine for me on my Diamond. Actually surprisingly good!
Is it possible to attach a copy of WorldCard Mobile
That come with Diamond
no, because it requires registration and can only be used on one device.
Because this version is VGA
i want Just to try it in x7500 as a Trial
and if it works
I Will purchase it
Spitwroot said:
I have installed it on my diamond and when you press on the icon to load nothing happens! Anyone got it to work? Cheers
Click to expand...
Click to collapse
Hey Spitwroot - did you ever get it working? I'm in the same boat...I have a Telus Diamond and no version I cand find of this product will properly run once installed. It's driving me batty as I truly will fork out the dough for it, if I can just get it working! I'm not prepared to do a hard reset over it...yet.
-Doug
...
Doesnt work with my sprint cdma version either. I think something about the cdma version of diamond makes it not compatible. I tired the trial on website and the one on the official diamond pro. nada
Same here, tried world card mobile on Sprint Diamond... no joy. Tap the icon and nothing happens.
I so want this to work!
wiaza100 said:
Because this version is VGA
i want Just to try it in x7500 as a Trial
and if it works
I Will purchase it
Click to expand...
Click to collapse
I have an x7510 on which it works very well indeed!
MS voice command not work on my HTC diamond, would you please help me, any body test any version on it?
I can't get MC1.6 to work on my Asian Rom 1.37 diamond. It gives an error after install...everything seems ok but when I go into settings, it hangs and I have to do a Hard reset
v1.6 UK made my phone lock up whenever I tied to access settings or programs. I had to hard reset the phone
yeah dont seam to work, you can use ciberon voice commander tho, works well.
you can download it from the TLR 3 ROM thread (in the rom development section)
Hi folks,
VC 1.6 definitively works on Diamond. I'm using it since I get mine last week.
JanDaMan said:
yeah dont seam to work, you can use ciberon voice commander tho, works well.
you can download it from the TLR 3 ROM thread (in the rom development section)
Click to expand...
Click to collapse
Does this require any training or anything? Didn't need to download it as it came on my ROM with the phone. I've tried to use it 3 times now and each time its failed to hear anything I say. I used to use MS VC all the time with very little problem.
funnysurf said:
Hi folks,
VC 1.6 definitively works on Diamond. I'm using it since I get mine last week.
Click to expand...
Click to collapse
Yep, it definately works. You just have to be clever enough to manually upgrade it to version 1.6.19209 otherwise it'll keep hanging your Diamond
Not sure what UK version im running, but the install crashed. I restarted the phone, and now it works great with my Parrot Bluetooth carket.
alanplum said:
Yep, it definately works. You just have to be clever enough to manually upgrade it to version 1.6.19209 otherwise it'll keep hanging your Diamond
Click to expand...
Click to collapse
I guess I am not clever enough. How did you do that?
alanplum said:
Yep, it definately works. You just have to be clever enough to manually upgrade it to version 1.6.19209 otherwise it'll keep hanging your Diamond
Click to expand...
Click to collapse
Thats a US release isn't it?
Does it work properly with our "posher" (or even proper!) English accents
Cyberon Voice Commander
Monty Burns said:
Does this require any training or anything? Didn't need to download it as it came on my ROM with the phone. I've tried to use it 3 times now and each time its failed to hear anything I say. I used to use MS VC all the time with very little problem.
Click to expand...
Click to collapse
Yeah it works without any training, and works a treat for me, you have to follow the correct command tho (displayed when you open the app, eg say start <application name>)
Note: there is a program called 'Cyberon Voice Speed Dial' and that is NOT the same and does require training
PaulusUK said:
Thats a US release isn't it?
Does it work properly with our "posher" (or even proper!) English accents
Click to expand...
Click to collapse
Yes, it is the US release, but I'm Scottish so I'm not really bothered.
Never had a copy of the UK version but it involves manually copying these files from version 19209:
sapi.dll
sapiwavstr.dll
spcacheaudio.dll
vcbthag.dll
VCOSShim_PPC05.dll
coicecmd.exe
VoiceCommand_PPC.cpl
VoiceCommandWMP.dll
Phew...
Fairly easy to do. Install version 1.6.17913 then remove the shortcut in the Windows\Startup Folder. Soft reset so VC does not start. Copy all the above to Program Files\Voice Command with the exception of the CPL which goes in Windows. Put shortcut back into Startup, soft reset and away you go.
or go into my thread to see how I did it with the german version:
Here
Regards
Tom
tommatt said:
or go into my thread to see how I did it with the german version:
Here
Regards
Tom
Click to expand...
Click to collapse
Hi Tom, Thanks for the tutorial. I did in fact read that post before. However, was you issue with MVC not working because it cause your Diamond to hang completely forcing a hard reset when you go into Settings?
I can install with the error like everyone here. However, it hangs and has to be hard reset when I go into settings.....with my previous Touch, I got the error too when installing the same file but it worked. It did take some registry changes to make it work with bluetooth.
Ok, I'm really inexpirienced with this stuff but i dl a touchflo, cube, and another thing and then i deleted it using active sync. but, me being an idiot probably did something rong and now the screen doesnt work when i touch it. everything works fine but it just doesnt respond whatsoever when i try and touch it... Help Plz????
BowerPower said:
Ok, I'm really inexpirienced with this stuff but i dl a touchflo, cube, and another thing and then i deleted it using active sync. but, me being an idiot probably did something rong and now the screen doesnt work when i touch it. everything works fine but it just doesnt respond whatsoever when i try and touch it... Help Plz????
Click to expand...
Click to collapse
Start, settings, Today, click on items.. depending on ROM select HTC Home or TouchFLO or other as required, click OK... tata
Wowzerz I actually found one of your posts for a change.
Does anyone have just a hd or qaurtz contact cab that i can install on the normal tf3d? Ive tried other tf3d versions but otheres have small problems.
Thanks
here you go. Should work fine with most of the TF versions....
thank you very much!
works perfect
Is the attached cab a black Contact page? Is there even a white version? Or doesn't it matter and it will adopt the same sort of colours I have in TF3D
can someone post a photo to see how the contact tab will be, after installing this cab?
Doesn't work on my diamond! I have the 2.03 rom with the first TF3D.
Need to do a hard reset now, because unsinstalling the old TF3D doesn't work
xavierdemon said:
Is the attached cab a black Contact page? Is there even a white version? Or doesn't it matter and it will adopt the same sort of colours I have in TF3D
Click to expand...
Click to collapse
I'm not sure but it has worked with all the rest of the tweaks i used.
equi said:
can someone post a photo to see how the contact tab will be, after installing this cab?
Click to expand...
Click to collapse
Theres one attached is slightly blurry
Rones said:
Doesn't work on my diamond! I have the 2.03 rom with the first TF3D.
Need to do a hard reset now, because unsinstalling the old TF3D doesn't work
Click to expand...
Click to collapse
I also use 2.03 rom and remeber to have net 3.5 installed and turn off tf3d then install.
Thanx for the cab works great
Installed cab after switching off TF3D as advised
Hmmm, didn't work for me - I have Net 3.5 and 1.93 official rom.
my touchflo stop working after this.
it got stock and i dont know what to do :S
mine didnt show anything in the people tab lol funny
phone has gone really slow now!!!!! freezes too!!!
not good
Please remember to follow the steps for it to work and also he said itmight not work on all tf3d but most.
Did not work for me, i have 1.93 ROM stock. I have net 3.5 installed, turned off TF3D, rebooted my device, installed cab, rebooted again, turned on TF3D and now it seems that the People tab is messed up. Everything else works fine but the People Tab, its almost as if it is missing a file.
Lucky for me, I uninstalled the cab and it reverted back to normal.
works fine for me!
stopped TF3D, installed it and started up TF3D again, didnt even need a reboot. Ive got the ATT Fuze/Touch Pro, stock Rom
Can it works on SENSE 2.5?
Hi
I have quite a weird problem with my Tytn II.
On the touchflo home screen it shows I have a new sms, indicated by a "1" by the sms tab, but I can't find the new sms anywhere! I've tried a soft reset but it didn't work...
Any ideas?
I had the exact same problem...
It was a custom ROM I installed, only way I got it sourted was by installing another one... Was a TPC Elite Win 6.5 ROM upgraded to a later version and havent had the problem since...
Try this http://forum.xda-developers.com/attachment.php?attachmentid=90046&stc=1&d=1217304922
stylez said:
Try this http://forum.xda-developers.com/attachment.php?attachmentid=90046&stc=1&d=1217304922
Click to expand...
Click to collapse
Worked like a charm!
Thanx!
Guyver786 said:
Worked like a charm!
Thanx!
Click to expand...
Click to collapse
That's cool just comes down to if you seen it before