I've modified the registry entry, i've try to use advancedconfig, but no lucky...
I've try to shutdown after modification, I've try to softreset, but every time the sytem goes up, the sim contacts is visible and the regisrty key comes back to "1"...
Any suggestions?
Thanks guys.
this works on my dual hopefully reg is same ?
Same
Same with me , always sim contacts, did all the same, no luck
I have WWE 1.35
grts
Get Schaps Advanced Config. Newest version is around 2.1, but the old ones all had the option to hide sim contacts too.
Rory
i use SK Tools. does the job!
rorydaredkign said:
Get Schaps Advanced Config. Newest version is around 2.1, but the old ones all had the option to hide sim contacts too.
Rory
Click to expand...
Click to collapse
doesn't work...
phankhi said:
i use SK Tools. does the job!
Click to expand...
Click to collapse
I don't think so...try to softreset (or power down) ...the SIM contact will be visible again.
I think that there is a startup program that recovers some registry keys.
Something similar happens also with deveicelock. If you use the device lock, the backlight timing is always set to 10seconds. If you change it, it works with the new timing until the next devicelock. (then it will be resetted to 10 seconds)
lightman3dd said:
I don't think so...try to softreset (or power down) ...the SIM contact will be visible again.
I think that there is a startup program that recovers some registry keys.
Something similar happens also with deveicelock. If you use the device lock, the backlight timing is always set to 10seconds. If you change it, it works with the new timing until the next devicelock. (then it will be resetted to 10 seconds)
Click to expand...
Click to collapse
Using SK tools works for me, i have soft resetted my phone many times and theres no sign of the sim contacts....
phankhi said:
Using SK tools works for me, i have soft resetted my phone many times and theres no sign of the sim contacts....
Click to expand...
Click to collapse
I've try several times with Sktools but after the softreset the sim contacts is visible...maybe something in my italian rom (1.35)? i really don't know.
yeah maybe. You could try to upgrade to 1.37.707.1
NikiSimFix
Had the same problem...
NikiSimFix.cab (program runs on startup) fixed this for me (probably imports a reg key on startup).
Cheers.
NikiSimFix
Tnx a Lot it works!!!
Excellent! It needs just a soft reset after installing
There is also a simpler way, which does not however survive a reset either (but it can be set through the standard menus instead of the registry, and it has the advantage of being easily toggled).
If - like me - you are synching your contacts from Outlook and do not want to see the SIM contacts, the easiest is to assign a category in Outlook to all your contacts, and then simply filter the All People view by that category. All your contacts are still there, and the SIM contacts disappear...
Doesn`t work for me. tried installing it to Device and Internal Storage performed a soft reset after both but sim contacts are still displayed. I think the only way to get this working is to delete all contacts from the sim then they definitely won`t show up.
**Edit** It seems to have worked after a second soft reset, brilliant
lightman3dd said:
I've try several times with Sktools but after the softreset the sim contacts is visible...maybe something in my italian rom (1.35)? i really don't know.
Click to expand...
Click to collapse
I've tried several tools and it keeps on coming back with me as well. Why oh why are such basic things so very badly implemented?
I'm using an O2 XDA Orbit 2 which I believe is basically a rebadged HYC Touch Cruise.
--
Marc Cornelius
works a treat thanks
I had to same issue... did everything but couldn't fix the prob...
I reflashed the rom to 1.93 and it works fine now :>
use POCKET TOOLMAN, it's working on my diamond
Same issue here! How have you fixed?
Related
HI all!
How can I hide the sim contacts? Which is the registry key to modify?
I've tried TweakUI (modified for Trinity) and all tweak works, except "Show/Hide SIM contacts".
Greetings
Using htc sim manager, you can:
A) Move all sim contacts into an outlook contact(put pictures, etc) vice versa
B) Delete all sim contacts/outlook contacts
No reason you need to have both
I've all my contacts on device, but I want to leave saved the contacts also on my SIM card. The method to hide them, there is.
Ravenlord said:
HI all!
How can I hide the sim contacts? Which is the registry key to modify?
I've tried TweakUI (modified for Trinity) and all tweak works, except "Show/Hide SIM contacts".
Greetings
Click to expand...
Click to collapse
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Set it to 0
But it'll go back to 1 if you Reset the device.
I installed PocketCM, since it doesn't show SIM i don't have to hide it anymore. Looks nicer too.
There was a file posted on this board to fix that issue. I forgot who posted it but here it is.
Thank you a lot! It works
bastienvans said:
There was a file posted on this board to fix that issue. I forgot who posted it but here it is.
Click to expand...
Click to collapse
Just moved over from Symbian UIQ 3 (m600i). I have no idea what CABS are and how to install the file you attached.
I also want to rid myself of seeing duplicated names as I want to see phone contacts but also retain SIM contacts. I go diving and change mobiles and still need the names & numbers.
copy the CAB to your phone and browse to it via the File Browser.. then execute.
not work!
please
This DOES work:
[HKEY_CURRENT_USER\Control Panel\Phone]
"ShowSIM"=dword:00000001 ->0 to disable, 1 to enable.
bastienvans said:
There was a file posted on this board to fix that issue. I forgot who posted it but here it is.
Click to expand...
Click to collapse
I made and posted it only to modaco.com, but it's nice to know it made it here too; considering it's the only one I know of that works after soft-reset.
grizzley said:
This DOES work:
[HKEY_CURRENT_USER\Control Panel\Phone]
"ShowSIM"=dword:00000001 ->0 to disable, 1 to enable.
Click to expand...
Click to collapse
only that to every soft reset it is repeated!
simfix
Thank you..it is working with the kaiser simfix!!!!!
works great! thx
nishv said:
works great! thx
Click to expand...
Click to collapse
Till your next restart.
Hiding SIM contacts
f1ip said:
. . .
I installed PocketCM, since it doesn't show SIM i don't have to hide it anymore. Looks nicer too.
Click to expand...
Click to collapse
CorruptedSanity said:
. . .
I also want to rid myself of seeing duplicated names as I want to see phone contacts but also retain SIM contacts. I go diving and change mobiles and still need the names & numbers.
Click to expand...
Click to collapse
@f1ip: I don't have Pocket CM, but KaiserTweak is an easy way to hide SIM contacts (and it's only 377 kB + 47 kB for the .xml file, so it's not a memory hog)
@Corrupted Sanity: I too switch phones sometimes - don't want to take the expensive PDA to some environments.
@Everybody: I find that even though I have "Hide SIM Contacts" enabled, Voice Command still looks at them when I ask to dial a contact, and says "Showing 2 Found" and then asks which one you want to dial - a - anyone else have this experience?
Would like to have Voice Command ignore SIM contacts - the "Showing 2 Found" thing is so annoying that I ended up deleting all my SIM contacts, then I have to copy them back to the SIM if I want to transfer the SIM to another phone.
CorruptedSanity said:
Till your next restart.
Click to expand...
Click to collapse
Did you even bother to read the release notes comment on Modaco? Or any followup comments? KaiserSimFix is the ONLY fix that still works after restart.
I don't know how i managed to fail in installation, but it seems not to work.
NuShrike said:
Did you even bother to read the release notes comment on Modaco? Or any followup comments? KaiserSimFix is the ONLY fix that still works after restart.
Click to expand...
Click to collapse
I dont visit Modaco very often, so no I have not read their release notes (where are they anyway?).
Got a link to kaisersimfix?
CorruptedSanity said:
I dont visit Modaco very often, so no I have not read their release notes (where are they anyway?).
Got a link to kaisersimfix?
Click to expand...
Click to collapse
Post #11 of this thread. Enjoy.
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
MACkjam said:
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
Click to expand...
Click to collapse
advanced config tool
http://duttythroy.lives-in.eu/
SoftKey Changer
There you go.. Install, soft reset, and its under Start -> Settings -> System
I gave it a try but my expectations were that would be what that soft key would be no matter what program I'm in, but that is not the case. I guess I'll use somethign else like AE Button to get teh keys I want.
Thanks for the post though.
[EDIT]
By the way, after uninstalling, the button assignments remain. Interesting.
Yep use AE Button. It's an amazing tool! Although be careful what you change as it can mess up your device used carelessly.
duncstar said:
There you go.. Install, soft reset, and its under Start -> Settings -> System
Click to expand...
Click to collapse
Thanks very much. I will give this a try.
In the meantime I had to restore a previous version from SPB Backup and this got sorted. I have decided not to re-install Pocket Informant 8 as it caused some isues with ringtones and performance.
I put this on my HTC Tilt and it works awesome, exactly what i was looking for to change the two soft keys.
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
RunsHouse said:
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
Click to expand...
Click to collapse
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
modestmelody said:
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
Click to expand...
Click to collapse
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
Worked perfectly. Thanks.
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
That's it! *Real* new sms Thanks!
A lot of people here have problems with their windows 6.1 and GPS. It seems some people have more problems than others, but someone on this forum has found a registry setting which solves my problem. At least until I soft reset my device, this causes the registry setting to go back to standard.
I’m talking about this post:
mavado said:
This solution helped for me:
The problem was in the registry of QuickGPS.
I changed the region settings of my PPC to Dutch, but QuickGPS doesn’t get this settings. So I assume it’s downloading the wrong GPS information.
After I changed the following registry setting I had a fix almost immediately :
[HKLM] - Software\HTC\QuickGPS\region changed from -- to NL
After using GPS Test I got a fix very fast.
Using:
Kaiser
OS DCS 1.4 WM6.1
R 1.64.06.04
Click to expand...
Click to collapse
Believe it or not but this works for me as I live in Holland but I think this could work for everyone who has problems regarding 6.1 and GPS no matter what radio you use. All we have to find out what the region codes are.
But this is a temporary fix, as I said soft-reset causes the setting to jump back to ‘--’ again and GPS is very slow whit the fix. Is it possible to create some sort of cab file or setting to set the region setting in the registry to user settings at reboot or wake-up? Or is altering QuickGPS also possible? If someone could point me in the right direction I would be very grateful.
spaanplaat said:
A lot of people here have problems with their windows 6.1 and GPS. It seems some people have more problems than others, but someone on this forum has found a registry setting which solves my problem. At least until I soft reset my device, this causes the registry setting to go back to standard.
I’m talking about this post:
Believe it or not but this works for me as I live in Holland but I think this could work for everyone who has problems regarding 6.1 and GPS no matter what radio you use. All we have to find out what the region codes are.
But this is a temporary fix, as I said soft-reset causes the setting to jump back to ‘--’ again and GPS is very slow whit the fix. Is it possible to create some sort of cab file or setting to set the region setting in the registry to user settings at reboot or wake-up? Or is altering QuickGPS also possible? If someone could point me in the right direction I would be very grateful.
Click to expand...
Click to collapse
After thinking about this on my way to work, I came across the fact that since I use KaiserTweak it will set the default QuickGPS settings back, which of course has its region set to "--". So i'm assuming that's why when you reset your phone thats why it resets your settings again
XML file
kjb86 said:
After thinking about this on my way to work, I came across the fact that since I use KaiserTweak it will set the default QuickGPS settings back, which of course has its region set to "--". So i'm assuming that's why when you reset your phone thats why it resets your settings again
Click to expand...
Click to collapse
Then I will look into the kaisertweak’s XML file and try to remove the QuickGPS settings and see if it works. Will keep you guys updated.
edit: Okay, this does not make any difference. So we have to find a way to set the user setting on every wake-up or boot. Does anyone know how to do this?
edit: Thought I had the answer, turns out... I didn't
spaanplaat said:
edit: Thought I had the answer, turns out... I didn't
Click to expand...
Click to collapse
what do you mean "BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON."???
kjb86 said:
what do you mean "BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON."???
Click to expand...
Click to collapse
No I found that answer using search, but doen't work with kaiser
QuickGPS runs as a service (a very annoying one if you don't disable the audio & popup and vibrate notification immediately ).
Have you killed QuickGPS via task manager before editing the registry and then soft resetting? (I use dotfred's, best task manager + utils proggie out!)
If the application is re-writing the registry constantly with the settings it started with, then that may be the reason why editing the settings doesn't work and why it also doesn't stick.
Give that a try...
Hope this helps!
_Alex_ said:
QuickGPS runs as a service (a very annoying one if you don't disable the audio & popup and vibrate notification immediately ).
Have you killed QuickGPS via task manager before editing the registry and then soft resetting? (I use dotfred's, best task manager + utils proggie out!)
If the application is re-writing the registry constantly with the settings it started with, then that may be the reason why editing the settings doesn't work and why it also doesn't stick.
Give that a try...
Hope this helps!
Click to expand...
Click to collapse
Hi _Alex_,
Thanks for your input.
I did try that, but unfortunately it still does not keep the same settings.
What I did was soft reset, change registry, soft reset - Then I had noticed that it kept the settings, but then I did a complete shut down and power up and then again, registry settings were back to '--"
I'm using the standard ATT ROM and the wierd thing for me is that I used the GSP (TomTom) on Tuesday with no issues. I tried to use it today and am unable to connect at all to the GPS via TomTom, Google Maps, or QuickGPS.
kjb86 said:
Hi _Alex_,
Thanks for your input.
I did try that, but unfortunately it still does not keep the same settings.
What I did was soft reset, change registry, soft reset - Then I had noticed that it kept the settings, but then I did a complete shut down and power up and then again, registry settings were back to '--"
Click to expand...
Click to collapse
But did you kill QuickGPS before editing the registry and proceeding to the soft reset? It runs as a hidden service, which is why I recommend using dotfred's task manager, because the standard HTC task manager might not show it running.
_Alex_ said:
But did you kill QuickGPS before editing the registry and proceeding to the soft reset? It runs as a hidden service, which is why I recommend using dotfred's task manager, because the standard HTC task manager might not show it running.
Click to expand...
Click to collapse
ahhh
No, still did not work. But thanks for trying, and yea that task manager shows a lot of programs that you can't see running
If you use Alexs kitchen, i think you can edit the Rgu file under region to reflex where you are and cook the package back into your rom and it would always reflex the region you choose?
I've not tested it, but would a MortScript in the startup folder not do the job?
I made a little MortScript and added it to startup:
Code:
While (1)
Sleep (60000)
If NOT regKeyEqualsString ("HKLM", "Software\HTC\QuickGPS\", "region", "SE")
RegWriteString ("HKLM", "Software\HTC\QuickGPS\", "region", "SE")
EndIf
EndWhile
This works and keeps the "SE"-setting (for Sweden), but having the script running constantly isn't exactly optimal as it uses processing power and thus adding to battery-drain. Anyone have any ideas on a different way of making the script, which is more effective/power-saving? Or is there an even better way to make the registry key stick?
Hi all, after reading numerous articles about how to fix my issue with GPS, I've managed to find a fix using the UK radio rom compatible with Dutty's 6.1 rom. What I found out was the my first lock always never locked or took forever. So, what I did was go to the registry and left the key:
"HKLM", "Software\HTC\QuickGPS\", "region" to "--"
Then for the first time, after a hard-boot, (power off/on), I had to do this once:
1. Start up GPSTool
2. Change the setting to "Warm Start" and click "open".
3. Leave the app running and open up my TOMTOM application.
4. Give it about a minute or two and then it would lock, no problems.
5. I then, exited out of TOMTOM and closed the GPSTool.
So, for the next time I need to start a GPS, enabled tool, I would just start it up and no problems, it locks right away, until the next hard-boot. Then I would do this again. Kinda stinks, but this was the ONLY working solution for now because I don't feel like flashing my phone again. I have many apps installed and it takes forever to reinstall everything. Hope this was helpful for some people. Enjoy!
--edit
Well, looks like GPSGate fixed another phone... hehe, very happy now!! Thanks all for mentioning the program!
i1135t said:
Hi all, after reading numerous articles about how to fix my issue with GPS, I've managed to find a fix using the UK radio rom compatible with Dutty's 6.1 rom. What I found out was the my first lock always never locked or took forever. So, what I did was go to the registry and left the key:
"HKLM", "Software\HTC\QuickGPS\", "region" to "--"
Then for the first time, after a hard-boot, (power off/on), I had to do this once:
1. Start up GPSTool
2. Change the setting to "Warm Start" and click "open".
3. Leave the app running and open up my TOMTOM application.
4. Give it about a minute or two and then it would lock, no problems.
5. I then, exited out of TOMTOM and closed the GPSTool.
So, for the next time I need to start a GPS, enabled tool, I would just start it up and no problems, it locks right away, until the next hard-boot. Then I would do this again. Kinda stinks, but this was the ONLY working solution for now because I don't feel like flashing my phone again. I have many apps installed and it takes forever to reinstall everything. Hope this was helpful for some people. Enjoy!
--edit
Well, looks like GPSGate fixed another phone... hehe, very happy now!! Thanks all for mentioning the program!
Click to expand...
Click to collapse
I don't understand the link between:
- the registry key "HKLM", "Software\HTC\QuickGPS\", "region"
- and what you said about GPSTool
In the end how do you solve the problem with the region ?
Chris
The GPSTool is built into the Dutty's 6.1 ROM. Don't get that confused with the GPSGate application. They are two seperate apps.
In order for this to work, I set had to set my the registry entry "region" from "US" to "--". The full path location is listed above. I think when I ran the QuickGPS utility, it set my region to "US" in the registry. You will have to regedit it back to "--" then try what I did, or it may not work. It didn't for me until I changed it back to default, which is "--". I remember reading somewhere here that a "warm boot" was clearing the RAM within the GPS hardware, so I played around with the idea of it running, while starting up a GPS enabled application and got it to work.
But I eventually decided to use the GPSGate application which solved my problem, without having to run the GPSTool method. Note that I got a quicker lock, after regediting the region area back to "--" and running the GPSGate application. Usually the first lock would never happen or take well over 10 min. Now, the first lock is with 1-2 min. which is fine for me and every subsequent time I need to use a GPS enabled application, it would lock right-away, within seconds, until the next hard-boot (power off/on). Hope that clears things up a little.
i1135t said:
The GPSTool is built into the Dutty's 6.1 ROM. Don't get that confused with the GPSGate application. They are two seperate apps.
In order for this to work, I set had to set my the registry entry "region" from "US" to "--". The full path location is listed above. I think when I ran the QuickGPS utility, it set my region to "US" in the registry. You will have to regedit it back to "--" then try what I did, or it may not work. It didn't for me until I changed it back to default, which is "--". I remember reading somewhere here that a "warm boot" was clearing the RAM within the GPS hardware, so I played around with the idea of it running, while starting up a GPS enabled application and got it to work.
But I eventually decided to use the GPSGate application which solved my problem, without having to run the GPSTool method. Note that I got a quicker lock, after regediting the region area back to "--" and running the GPSGate application. Usually the first lock would never happen or take well over 10 min. Now, the first lock is with 1-2 min. which is fine for me and every subsequent time I need to use a GPS enabled application, it would lock right-away, within seconds, until the next hard-boot (power off/on). Hope that clears things up a little.
Click to expand...
Click to collapse
Hmm good solution now its takes less than a min to start tomtom. thanks.
Is this problem in all wm6.1 roms....Im certain that this is the issue with mine as once i downloaded data my fix was much more rapid then without (1.5-2.5mins, no tall buildings around clear line of sight). Any wm6.1 not have this issue??
i1135t said:
But I eventually decided to use the GPSGate application which solved my problem
Click to expand...
Click to collapse
What exactly is it that GPSGate does to solve the problem? Any specific settings you need to apply in GPSGate?
Does any one know of a program that will do the following...........
-If you leave your phone somewhere and the phone is not locked or you just forgot to lock it.......You can call a certain number to lock the phone for you.
-it might sound dumb, but that would be a neat program
Update:
This program really works......... Thanks to hbatra!
Sprite Terminator
http://www.spritesoftware.com/?page_id=280
HTML:
http://usa.kaspersky.com/products_services/mobile-security.php
Don't know about any free software for it though...
you can power-off with "eye on thief" app
by sending sms with command
or u can command to run "eye on privacy" app,
which could lock yr phone
http://www.mycnknow.com/LockAppen.htm
Thank You I will try these and let you know how they work
yeah
yeah let all know brotha!, i cant wait
Take a look at SpriteTerminator (http://www.spritesoftware.com/?page_id=280).
Not freeware - but not only does it allow you to lock your phone, it also allows you to track it, erase the contents, disallow the changing of the SIM etc. etc.
hbatra said:
Take a look at SpriteTerminator (http://www.spritesoftware.com/?page_id=280).
Not freeware - but not only does it allow you to lock your phone, it also allows you to track it, erase the contents, disallow the changing of the SIM etc. etc.
Click to expand...
Click to collapse
That is one of the hottest programs I have saw so for. If you are a business person, someone who just forgets there phone all the time or even if you just lost your phone..............You can use this program , so that you can txt yourself to lock, unlock or even erase everything out of your phone and alot more from just txting your phone. Thanks again hbatra
all the nokia E-Series come with this functionality built in.
it definitely is a cool option for when you lose your phone.
Elisha said:
all the nokia E-Series come with this functionality built in.
it definitely is a cool option for when you lose your phone.
Click to expand...
Click to collapse
There is another cool feature to, if you lose it or someone steals it.........You can text your phone and it will delete everything off th phone included you memeory card
gsessons said:
There is another cool feature to, if you lose it or someone steals it.........You can text your phone and it will delete everything off th phone included you memeory card
Click to expand...
Click to collapse
this "eye on thief" doing the same. I thought it'll be obvious from name..
I am running it on my phone as for protection.
What's specially cool about this one, is that it's just 1 exe, no install, very tiny and simple. u can burn it in ROM. This way it's hard to notice and disable by thief.
Also it's free with sort of limitations, but still usable.
in help you'll find list of comands. I just tried poweroff and reset.
poweroff switched only to stand-by but reset worked OK. on wm6.1
and no incomming sms showed up.
eeh, be carefull by testing.. I forgot about having it and after inserting new prepaid SIM, I find out my credit's gone with no sign of SMSs being send out.
ok, but as this thread is about forgotten phone, besides reset and not working power off, there are commands to forward calls and SMSs so maybe this is what you've been after? if you'll give it a try, let us know if it coculd be used this way.
papo said:
this "eye on thief" doing the same. I thought it'll be obvious from name..
I am running it on my phone as for protection.
What's specially cool about this one, is that it's just 1 exe, no install, very tiny and simple. u can burn it in ROM. This way it's hard to notice and disable by thief.
Also it's free with sort of limitations, but still usable.
in help you'll find list of comands. I just tried poweroff and reset.
poweroff switched only to stand-by but reset worked OK. on wm6.1
and no incomming sms showed up.
eeh, be carefull by testing.. I forgot about having it and after inserting new prepaid SIM, I find out my credit's gone with no sign of SMSs being send out.
ok, but as this thread is about forgotten phone, besides reset and not working power off, there are commands to forward calls and SMSs so maybe this is what you've been after? if you'll give it a try, let us know if it coculd be used this way.
Click to expand...
Click to collapse
I tried that one, and followed the commands but could not get it to work. Maybe you have to have a certain model (phone) for it to work. I have the ATT Tilt and I could install it but the commands would not work. But I did try it, and yes it is a very small app.
gsessons said:
I tried that one, and followed the commands but could not get it to work. Maybe you have to have a certain model (phone) for it to work. I have the ATT Tilt and I could install it but the commands would not work. But I did try it, and yes it is a very small app.
Click to expand...
Click to collapse
sms has to be it format: passreset
where pass is your remote password
and have you set up both password, added your sim and turned autorun on?
I love throttlelock it automatically locks the phone when it goes to sleep so no need to worry about if you locked it or not and to unlock the phone you simply slide your finger over a preset pattern. Very simple but very effective.
papo said:
sms has to be it format: passreset
where pass is your remote password
and have you set up both password, added your sim and turned autorun on?
Click to expand...
Click to collapse
Yes I tried that as well, I even downloaded the pdf file with the step by step instuctions and it just does not work. That is why I said maybe it is the type of phone that I have, because the Sprite Termintor works perfect and they both use the sms commands to shut off, lock or what ever you what to do.
What type of phone you have.
i've got tytnII, T-mobile device but ROM by orange UK.
this app was working perfect on all my prev phones. trinity, rwo artemis. another tytn II unbranded. and different ROMs.
no idea then..
It beeps after every phone start, signaling that it's running ok.
I have it in windows folder, link in StartUp was created automatically with -startup parameter - "\windows\lockapppen.exe" -startup
I just set both passwords (used the same)
have check-on on first 4 boxes
have added my two SIMs
added both 2 numbers in SMS list.. ..maybe this could be problem. maybe it only accepts requests from numbers on SMS list. but that would not be too practical.
after sending sms with "passreset" (say "pass" is my password) it didn't show this message and replied back that command was processed.
was running this on wm6 and 6.1 too. no more ideas, sorry