tomtom w/o sim card (tilt) - Tilt, TyTN II, MDA Vario III General

hi:
my phone should be here in cop days... still lining up mod sequence and prefs..
if i put my sim into my laptop, can i use my tomtom loaded tilt for just gps?
thanx

Yes the GPS works without a sim card inserted

Do you have some sort of gadget to use with your sim card and notebook? What does it do?

ChumleyEX said:
Do you have some sort of gadget to use with your sim card and notebook? What does it do?
Click to expand...
Click to collapse
its just a att card that goes into pcm slot or whatever its called. put sim into it then put that into the lappie.. its provider specific

Gotcha.. you know, you can tether your phone to do that too.

Related

is it possible / room enough to use a dual sim ?

i like to know if there is room enough above the sim to use a duosim from duosim.xcom ?
Anyone an idea?
come on , is there any room to place a dual sim ?
Oh, wow. That stuff looks cool. Now I'm curious too.
Yes, there should be room enough.
So, I've tried it and yes it fits but it doesn't work.
The TD has 8 connections to the SIM card and the Magic Sim (www.dual-sim.nl, 16th cut version) has 6 connections. It is 16th gen card which they propose to use for smartphones....
It works on my old Nokia 6021. This phone has 6 connections to the SIM Card.
The cutted SIM Card doesn't work anymore on the TD so I have to purchase a new one. I have sent a mail to dual-sim.nl. I will post the outcome.
number of contacts is irrelevant. Only 6 contacts are used for sim cards, the last 2 are RFU (reserved for future use).
If i read you right, after you cut up your sim card it doesnt work anymore? even directly in the phone without the dual sim? If thats the case your broke your sim while cutting it. The dual sim may or may not work still.
The cutted SIM doesn't work in the TD but does work in the Nokia 6021.
The Magic Sim doesn't work in the TD but does work in the Nokia 6021.
So, my assumption was that the cut is the reason that the SIM card doesn't work anymore on the TD. Strange that it still works in the 6021??
No, there is an incompatability between the magic sim and the touch diamond it sounds like. Only 6 contacts on the sim are used, the last two do nothing.
So if it works fine in your 6021 and not the TD, then its the magic sim that has the problem.
What error do you receive? no sim/insert sim?
SIM card is seen, Magic Sim program is available in teh TD but it doesn't register to the network.
geraldkw said:
SIM card is seen, Magic Sim program is available in teh TD but it doesn't register to the network.
Click to expand...
Click to collapse
Hmm thats really strange. What happens when you manually register?
It lists the available networks. KPN (my provider) in one of the them. If I try to connect to this netwerk the same thing occurs: can't register... I can try another network (roaming)?
Hmm that means the IMSI is not being passed corectly.
Sounds like a bug with the multisim itself. Another brand might work.
Not all new USIM cards works fine.
Put your phone on GSM mode instead of WCDMA or Auto.
Then the Dualsim works fine.
someone1234 said:
Hmm that means the IMSI is not being passed corectly.
Sounds like a bug with the multisim itself. Another brand might work.
Click to expand...
Click to collapse
Due to your questions I tried it again and came to the conclusion that the cutted SIM card didn't work in the TD because it didn't contacted completely. I also saw a different kind of slide for the Magic Sim which leads to a better contact of the Magic Sim to the TD and now everythong works!!
Thanks someone1234 for taking the effort ask further
geraldkw said:
Thanks someone1234 for taking the effort ask further
Click to expand...
Click to collapse
Thats great! no problem.
Does the Dual-sim 16th gen. non-cut version also fit into the TD?
I don't think my employer will appreciate it if I would cut my KPN sim-card of my company phone...
anyone tried the 20th gen dual sim adapters yet?

Tilt not recognizing SIM card

Out of the blue my Tilt will not recognize the presence of a SIM card. When you power the phone on it comes up with the emergency dialer even though there is a good SIM card installed. The pins look fine. And the SIM works in other phones. Is this a known problem with the Tilt/Kaiser that someone could share the solution with me please? It's out of warranty and it's my dime to fix/replace it.
TIA

NO SIM

my sim card is not workin only can make emergency calls,what is the problem??
darrellkelly93 said:
my sim card is not workin only can make emergency calls,what is the problem??
Click to expand...
Click to collapse
umm your service is disconnected?????
no,its not reading the card slot at all
This may be a stupid question- is the SIM card in the proper way? When did this start? What changed? Did you drop the phone?
darrellkelly93 said:
my sim card is not workin only can make emergency calls,what is the problem??
Click to expand...
Click to collapse
When I first bought my Tilt used, I had the same problem. I had to stick a tiny part of a post-it to the back of my SIM and shove it in there. It's like my SIM wasn't thick enough.
The best way - to try with another SIM (maybe your friends have a mobile-phone )
Sometimes the old SIMs don't want to work with modern devices....
well heres my 2 cents as i just fixed it, my issue at first i thought it was the sim slot (replaced...) then found out the ribbon was damaged a crack occured, after another week of waiting for a package (today) i replaced it and now its running fine
Same here
My Sim was no longer available.
Kaiser had "sim card is missing", but the sim was in there.
I disassebled it and found that the main flex cable was damaged.
Now I'm waiting for replacement.
So, When the phone shows up "sim missing" it's an flex cable matter not the sim card flex or the sim card unit.
same problem here
I'm having the same problem here. thought that it was the flex cable of the sim, but when I disassambled the Kaiser I found out that the main cable was slightly scrached from a corner, and the sim's cable was there pluged well... I'm trying to fix it..gonna post the result for "sim card failure"...

Chang Sim card, back to original Sim

i changed my Sim card to one I use in the UK and then put back in my original Sim card and now the phone tells me there is no Sim card in the phone but you can still make an emergecy Call
I cant find any thing in settings to configure or change Sim
Or is there somthing wrong with my phone.
I would contact your provider. Sounds like something wrong with the SIM.
Bruce Inman said:
I would contact your provider. Sounds like something wrong with the SIM.
Click to expand...
Click to collapse
The Sim in ?? and the other are both working in another phone.
My TD2 is an expensive ornament ATM
porridge said:
The Sim in ?? and the other are both working in another phone.
My TD2 is an expensive ornament ATM
Click to expand...
Click to collapse
You may have to hard reset to get it to regognize your SIM again.
Also try to get to SIM manager with the one that doesn't work and see if you can access it that way.
Bruce Inman said:
You may have to hard reset to get it to regognize your SIM again.
Also try to get to SIM manager with the one that doesn't work and see if you can access it that way.
Click to expand...
Click to collapse
Ok I am going to appoligies for waisting your time
And admit to being an idiot, apparently it helps if you insert the sim card in the right direction.
Yes, that usually helps!
Glad you fixed it.

No sim card inserted

I have a galaxy s6 for tmobile. I have been using it fine for a while but the other day it gave me an error saying no sim card is inserted. I had a spare sim card and tried that one with no luck. I tried both sim cards in a different phone and worked with no problem. I have read about people dropping the phone and having sim card issues but thats not the case phone was not dropped. I noticed the sim card issue when i took it out my pocket to send a message and was not able to. the only thing i can think of is the sim card reader is shot some how?
I was wondering if there any other options for me to check before i go and get a new sim reader soldered in?
thanks in advance

Categories

Resources