Hello,
some days ago I did update my VPA Compact GPS on WM 6.1 from Karmba (http://forum.xda-developers.com/showthread.php?t=400135). Now I want to downgrade back to WM 5.0. Please help me!
Sorry my English isn't very good, but I hope you could help me.
Thank you very much for your help.
Christian
Hello,
Take a look here : http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
First copy SSPL to your device and run it
It will run bootscreen (Multicolored with the letters last ends with .ds and beware to check this because it is the most important step)
remove the option "allow USB connections from" Activesync on your computer
then connect your device using usb cable
then flash your original rom
if it fails then you will always have to re-run SSPL
for reference to SSPL vist this thread:
http://forum.xda-developers.com/showthread.php?t=293632
and complete details can be found on trinityguides site
good luck
Thanks a lot. I will try it.
Thanks a lot. I got it and now I'm very happy. Thanks
Related
Hi @ all,
**** happens, yesterday i tried to upgrade my rom on charmer (mda compact 2).
During installation system hangs on and didn´t finish.
So now i have only the startscreen and can reach the bootloader.
Tried now to flash an original rom, the ruu says error 294 invalid vendor id.
Otherwise the ruu (for no id) ended with error 238 file read.
My bootloder shows IPL 1.12, SPL 1.12 and USB connected.
I have read a lot of threads but cant find a answer for that.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
ronni
Hi Ronni,
same problem here. Do you found any solution?
Is it right, that your Device not charging and USB is not recognizing too?
Bg
Joy
Are you trying to flash WM6 ROM to your charmer? Because WM6 required IPL and SPL level at least 2.xx.
Did you tried this method to bring charmer back to life?
wow, thank you for your quick response. Hmm, I´m not shure, it´s a PDA from a Collegue, I don´t know, what he do with it. (I know only he try to flash something) Next week he take it to our office, then I try your solution
Thank you again
Joy
Bootloaderhang
Today i tried to update my rom... while the update i had an error.
i had updated the http://forum.xda-developers.com/showthread.php?t=363882
after the hardreset the phone hang by the first screen. I can press everething but nothing happens.
now I tried to flash a nother rom but it is unpossible because it can´t connect with windows mobile center on the pc.
Has anyone a good idea?
Thanks a lot for helping.
I wish all users in that great forum a happy new year
didi500
hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..
first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it
ok, i did exactly what you wrote and now everything work! thank for you help!
why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se
first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se
SIM TOOL KIT is the only reason one would want to downgrade
Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.
help !
i hope somebody can help me,
i am tree days trying to update my rom on my blue angel (tmobile compact III) and every tim when i try to update the maupgrade starts ,go,s to the next screen and y see the version i have and the one i want to upgrade ,than i say next ,the program let me se the brogres bar and the actice sync disconnect end as jou can gues the program stops and say dat the phone is not connected en finisht.
some reconise this ??? pleas help me !
by the way : sorry for my bad english.
greets marco.
first of all, the compact III is not the blueangel, you might want to check again, what device you have before trying to upgrade again, because otherwise you can seriously harm your device.
and the next thing is:
you should kill you activesync before attempting to upgrade, use maupgradeut_noid instead of baupgradeut and put your device into bootloader mode before connecting it to the pc.
i think you have a lot of reading to do before attempting to upgrade again. the first upgrade is just not that simple and it is not done by connecting the device and just clicking 'upgrade'.
try these step by step instructions: -=here=-
make sure to read the instructions first, all the steps there are important, none of them can be skipped, if you don't understand anything in there, please come back to this thread and ask about it.
from what you described, the way you were going to flash the device was very wrong and could have never worked in the first place, but first of all, make sure, your device is really a blueangel, or else you are in the wrong section of the forum.
it works
thanks chef,
this is not the first time that i upgrade a phone and this pretickulair phone was already upgradet by me.
i think the last time i cid unlocket not permanentley so i cid unlocked and it works.
now i have win mob 6.5.1 rfom D_Two for the blue angel on my device and it works perfect !!
but thanks for the warning !!
greets by me !!!
i didn't mean to offend you or doubt your skills, but from one short post, it is hard to determine the knowledge base of the user posting the question, the blueangel is the mda3 btw. not the compact 3, because that wouold be the tytn, an entirely different device. i'm glad it worked out for you, have fun, d-two's roms are great, fast and stable. enjoy!
sorry tony i was wrong,
i have a mda III not the compact so you where write.
i used now two days and it works super !!
d two is the best !!
greets marco
Dear All,
Anyone in this site can help me to give me the detail procedure how to upgrade my old PDA2k verion 1.40.00 WWE to the latest one version 1.42.00 WWE. Thank you very much.
hi and welcome to the forum.
since that appears to be an official upgrade, if you have a windows xp pc, all you need to do is open active sync, disable usb connections and then start the upgrade, shouldn't be any trouble. after having successfully upgraded, you can re-enable the usb connections to be able to sync again. if you are using windows vista / 7, the easiest way would be, to use another pc or if you are confident enough, you can try and follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=623349
just click how to and follow the manual. but remember, this is absolutely not recommended for beginners and if you fail to upgrade, you will need a windows xp pc to get the device working again. also, in case you decide you want to go a little further than the last official upgrade, have a look at my tutorial thread, linked in my signature. you'll find a lot of interesting stuff there, new roms, tools, apps...
jaybelmes said:
Dear All,
Anyone in this site can help me to give me the detail procedure how to upgrade my old PDA2k verion 1.40.00 WWE to the latest one version 1.42.00 WWE. Thank you very much.
Click to expand...
Click to collapse
Connect the device to the XP computer via ActiveSync, and run the exe that you downloaded (as Chef menitoned, it seems that you are trying to run an official update). Simply follow the on screen instructions. Before starting anything, make sure that your battery has at least 50% battery.
Good luck!
Please, I tried loading Android on my At&t Tilt, and it wasn't successful, so I decided to switch back to Win 6.5, but could not load beyond
"Smart Mobility"
R 1.70.01iNex
G 25.65.30.04H
D 1.56.00.00
Please, I'll appreciate your help and concern. I've spent more than 10 hours trying to fix it using most of the thread posts.
I will love helpers to be specific on how to change back to win 6.5, and the complete tools for making android work on it.
I will also love someone who can help me through chat page on facebook or yahoo. My id is tundelogic for both. Thanks in anticipation and God bless you.
If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5
Infosoft.lt said:
If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5
Click to expand...
Click to collapse
I tried installing android, but it didn't install, after much trial, I felt switching back to WM ROM will work for me.
Please, don't be annoyed can u please post links of all I'll need to get my phone back to WM 6.1. i.e
Hard SPL to be used, Radio to use and Rom to use. I appreciate your response. Thank you.
> HardSPL 3.56 (force USB) / or you can use 3.34
http://forum.xda-developers.com/showthread.php?t=498320&highlight=Hard+SPL+3.56
> Radio 1.71... (actually I've never had any problems with other versions, but 1.71 is the newest).
http://forum.xda-developers.com/showthread.php?t=393182&highlight=Radio (post #3)
> Official WM 6.1
http://forum.xda-developers.com/showthread.php?t=439408&highlight=Kaiser+WWE+6.1
Because there were some problems for you while trying to flash Android, I recommend firstly to enter bootloader (hold Camera + Power buttons together and reset with stylus (button for reset is near miniUSB port; just put stylus in it and push for a few seconds); you'll see tri-color screen with SPL version...), then connect it to computer and finally run WM 6.1 EXE file (in case you're using Windows 7, set file compatibility mode to XP <- I'm not sure if it's necessary).
Thanks I'll get back as soon as I'm successful. Please, if you won't mind, can you please give me your chat id, so that if I have any issue, I can reach you quickly. Thanks once again. Y! [email protected].
If you'll need my help: http://www.facebook.com/Vytautas.Baciulis
Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.
tundelogic said:
Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.
Click to expand...
Click to collapse
You can get the files needed to run the android and guide at http://forum.xda-developers.com/showthread.php?t=680518