Hi everyone. Does anyone know whether it would be possibe to have the WM6 smart dialing on a WM5 rom. My hermes running LVSW WM6 defaults to using the WM6 smart dialing, however if you want to enable the video call options then it seems to use the WM5 dailing screen with the old smart dial.
I was thinking, if the WM5 dailing works with WM6, then maybe the default WM6 one would work in WM5 with a bit of fiddling.
The reason i want this is because when i call people i type the name with the smart dial jobby and there they all are. Problem is though that if you then scroll to the one you want and click the wheel it does not give you the option of what number you want to call them on, eg mobile or home. It just dials the last one you used for that person.
In WM6 when you scroll and select it then brings up the contact details so you can choose which no you want to dial.
Few, that took some explaining.
Thanks for your help guys and gals.
Rob
anyone got any ideas ?
just trying to revive this and see if anyone can help
i think it is impossible
im wondering if this exists or not? i thought since almost everything else was available perhaps someone had a cab for this or something very similar to the TOUCH keyboard config. or would this be a part of a Rom?>
its available, i dont have a direct link on this comp. but there are many throughought the kaiser forums
Look at the cab collection post
But note that on my kaiser, it was causing troubles to PocketCM Keyboard...
So I just kept this one : PocketCM keyboard
I also had some troubles with it... on german dictionary the keys stoped working and stuff... i removed it and Use PocketCm Keyboard...
I installed this and it worked very well with the kaiser for T9 text but unfortunatley you lost the ability to
When sending text or e-mail if you type the first couple letters it shows you a list of contacts which meet that description, with this keyboard installed it takes that away and you phisycally have to go into contacts and select them. i use this a lot so anyone that has worked out how to install the keyboard and keep this feature please post up.
Thanks
ive been testing both, my only qualm with PocketCM is some words cannot always be added. ITS VERY annoying...and also the keyboard is still somewhat too small for my fingers...im testing the HTC keyboard as we speak...seems alright but both have advantages
Hi folks
Previous to upgrading to HTC's official WM6.1 upgrade I was just happy with everything on my HTC Kaiser. Extept for the fact that I have no T9 dictionary working since trying to solve my FN Space issue (Please see
SOLVED!!! - HTC WM6.1 ROM : Missing "Fn Space" function?). At first I could live without T9 as I always use the FN Space function to type non english characters (I'm a foreigner afterall), but recently, I'd rather go back to WM6.0 where everything was working 100%.
Does anyone know a solution for this?
Thanks in advance
Word completion
Stupid me
All I had to do was go into Start>Settings>Input and check "Suggest words when entering text" under "Word Completion"
Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
gnarolibero said:
Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
Click to expand...
Click to collapse
I have a cab (thanks to !Aman!). You can get block recog.cab from my Topaz File Mirror.
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
"]!Aman![/URL]). You can get block recog.cab from my Topaz File Mirror.[/QUOTE]
gnarolibero said:
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
Click to expand...
Click to collapse
strange it works for me on WM 6.1
what ROM are you using it for?
BeeGee_Tokyo said:
strange it works for me on WM 6.1
what ROM are you using it for?
Click to expand...
Click to collapse
I'm trying to get the Block recognizer too.
It seems to me that Microsoft blocked it in WM 6.5
EzInput 2.1 doesnt support old SIP methods like block recongniser, thats why it doesnt work for you guys.
!Aman! said:
EzInput 2.1 doesn't support old SIP methods like block recognizer, that's why it doesn't work for you guys.
Click to expand...
Click to collapse
Hey Aman, but at Microsoft WebPage, they talk about the input methods for WM 6.5 and Block/Letter Recognize are there !!!!!!!
I though that the nes versions of cooked ROM's would be able to have then too.
Finally working BR and LR
Originally Posted by NothingBetterToDo
So sorry for keeping you guys waiting. The following are the steps I took based on my memory.
To enable the Letter Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSipInputMethod
"Default"="1" – Enabled
To enable the Block Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSipInputMethod
"Default"="1" – Enabled
You will notice that this will not make the SIP appear, for example, in your SMS application. However, it should appear in the pulldown menu at Start->Settings->Personal->Input. Now, if you try to set the Letter Recognizer as default, thinking that it will appear in SMS application, it doesn't. For some reason, it will always default back to the Touch Input (or EzInput) SIP.
So, the next step is to make the Letter Recognizer SIP the default. To do that, check the value at
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
It should be "0654897B-B359-473F-B28B-D85CF601C57F" (for Touch Input SIP). Replace that with
"42429690-AE04-11D0-A4F8-00AA00A749B9" (for Letter Recognizer SIP).
WARNING -- very very important to make sure the above is entered correctly. According to some posts elsewhere, a non existent SIP can crash your device. You might want to confirm if you have the Letter Recognizer SIP by searching for the msim.dll file. If it exists, I suppose it is probably safe.
After soft reset (power on/off device), you should now see the Letter Recognizer in your SMS application. However, you will also notice it doesn't work properly. For eg, the Capital Letter (left panel) doesn't work, there is this irritating word suggestions thing that keep popping up, it is quite slow and quite inaccurate, the Help doesn't work well.
To resolve these problems, set the following to 1:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip\IsOtherSip
Do a soft reset and the problems should disappear and you have a good Letter Recognizer to work with (even with fingernail), save for the following problems:
a. Sometimes response may not be very good. Can be quite slow especially if you are entering letters like "i", "r". Maybe this is because of the screen sensitivity.
b. If you click on the little triangle and want to switch to the Touch Input SIP, you can. But the problem is that you can't switch back to the Letter Recognizer anymore unless you do a soft reset. I guess this is OK if you use Letter Recognizer exclusively, but if you want the Chinese Handwriting feature in Touch Input (which is pretty good IMO), then it is not good.
Sorry for the long post. Thought it is better to also share my observations. I am a newbie with registry thing, so I prefer to do step by step and hence many soft resets. If you are gungho enough, just do the steps in bold followed by a soft reset. Hope it works for all you guys.
Note -- if you don't feel safe doing the registry changes, an alternative is to use the Touch Input SIP but set the waiting time to the shortest possible which will reduce the delay. But it is still very irritating to use IMHO.
Cheers
Just to remember all that the solution I described at the previous post is not mine and was Originally Posted by NothingBetterToDo. So, many thnaks to him for the great solution !!!!!!
Info for the ones that doesnt have en version
Hi
Info to all of you with other language then english.
The file msim.dll are country specific, in sweden its called msimsw.dll so i guess you will be able to find your version if you search the registry for msmi and then you will find a msmiXX.dll that is the correct one for your country.
I hade to add the info for {42429690-AE04-11D0-A4F8-00AA00A749B9} and {42429691-ae04-11d0-a4f8-00aa00a749b9} because it was missing info so it's not enought to only change the IsSipInputMethod to 1.
I have attached the files i used, but plz realise that this one is for swedish a version. You can edit the files with notepad to adress the localized .dll file for your country.
After this to be able to use the input methods i did what nicksalgado said and change
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
to {42429691-ae04-11d0-a4f8-00aa00a749b9} to use Block recognizer as default im
/SebulbaSe
Hi
I have the "RUU_Topaz_S_HTC_SPA_2.16.412.1_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship", and has the same problem that you describe. I use the HTC Pure from AT&T, and in the original AT&T ROM the Block Recognizer work it just fine. Is there a way to captura a cab to use to solve this problem from the original AT&T Rom?? Regards
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
yulbeast said:
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
Click to expand...
Click to collapse
Use this app to choose your SIP.
Activation of the Letter/Block Recognizer cookbook
Hi all
thanks, it works perfectly on my Topaz.
How to desactivate properly and completely block recognizer (register and so on) of my Topaz now, because I want tu use the SPB Back Up of my Topaz on my Touch2..and I am sure I will Have some problems with this change..?
Thanks
It's not a good idea to use a full backup file from one device to a different one.
Hello to Everybody,
i have a real problem in relation with a lot of italians cooked rom (WM6.5) which i downloaded on my Topaz. When i'm texting more then 15 sms, at the beginning of the 16st, the sms panel is too slow and the keypad starts writing number at places of letters. If possible, i prefer to use the original keypad. My sim card allow at maximum 5o sms text. All the rom i'm using are italians but i know that on your exceptional forum i can find someting that can help me with this problem (for example one cab fix,). Someone can help me?
Thanks in advance
yamaracing said:
Hello to Everybody,
i have a real problem in relation with a lot of italians cooked rom (WM6.5) which i downloaded on my Topaz. When i'm texting more then 15 sms, at the beginning of the 16st, the sms panel is too slow and the keypad starts writing number at places of letters. If possible, i prefer to use the original keypad. My sim card allow at maximum 5o sms text. All the rom i'm using are italians but i know that on your exceptional forum i can find someting that can help me with this problem (for example one cab fix,). Someone can help me?
Thanks in advance
Click to expand...
Click to collapse
There are SMS fixes depending on what device your ROM base is from.
Do you know if your ROM is LEO or Topaz based?