Database Develop

TomTom 6 Guide for HTC Kaiser (FAQ)

Here I compiled list of question and answer about using TomTom 6 with the HTC Kaiser. Forum Mods, if this is good enough, please make it sticky topic.
*** Which version of TomTom is in the Application CD?
6.032 (8351) - as of September 15, 2007
*** Is that full version or trial version?
It is called TomTom Taster Edition and It is full version, it will not expired, and there is no feature limitation compared to retail version.
*** Is it installed in the ROM by default?
No, it is not. You need to manually install it.
*** How to install it?
Connect to ActiveSync, from the HTC Kaiser Application CD, launch:
Installer_Kaiser_ttn_6_032_8351_HTC_WWE_20070716.EXE
*** I dont have that executable file in my HTC Kaiser Application CD!
Yes, you are not alone, probably you purchased North America version.
http://forum.xda-developers.com/showthread.php?t=329957
http://forum.xda-developers.com/showthread.php?t=327917&page=2
You can also download it here:
http://rapidshare.com/files/56585274/6_032_8351.rar (this link might not be permanent)
Or here (.CAB):
http://www.sendspace.com/file/9379xf (this link might not be permanent)
*** I have TomTom 6.030 (or prior version), what's the main difference?
6.032 has "Built-in Internal GPS" setting and the HTC Kaiser also have one.
*** Can I use/install other maps?
Yes you can. You can purchase additional maps (maps only), and then activate it.
*** Warning! Do not change the external GPS setting!
You should see "external GPS" icon in the Settings->System, do not change anything there.
You might need to hard-reset your device, more info:
http://www.modaco.com/word-warning-re-GPS-se-t258943.html
*** How can I use my own TomTom software?
So, you do not want to use TomTom from the Application CD.
Basically, you just need to install your own TomTom software and use this setting for the GPS:
- Other NMEA GPS receiver
- GPS baud rate = 4800
- GPS is connected to COM4:
For detailed information, check out here:
http://www.modaco.com/TomTom-Kaiser-t256790.html
*** How good is the internal GPS? Any problems?
From my own experience, it is working fine. Signal strength may vary and it depends on the situation (cloudy, clear sky, surounding area, buildings, etc.).
On average, I got satellite fix around 30 - 60 seconds.
However, some people experienced problems which you can follow here:
http://www.modaco.com/GPS-positioning-problems-t259285.html
Paul from MoDaCo.com, reported a bug
"The GPS bug seems to occur with some applications whereby the GPS 'data stream' will pause for a few seconds at a time, which makes some apps think the GPS has gone away (e.g. Google Maps) and other apps just update in sudden jumps rather than smoothly."
http://www.modaco.com/Paul-Reviews-HTC-P45-t256569.html
But, I think that problem is intermittent (randomly occur).
*** How about TomTom PLUS service?
Check out here:
http://forum.xda-developers.com/showthread.php?t=328444
*** TomTom always start with NO SOUND, why?
It's a bug, you have to switch off the data connection before starting TomTom.
SIMPLE FIX: Roll the volume wheel and sound turns on.
Thanks to all XDA-Dev users, Paul and other users from MoDaCo.com
Feel free to add more information in here

I added this thread to the wiki.

The above is all good info.
However, if you are having problems do not believe that the above is the only setup that will work.
I happen to use a bluetooth setup from time to time and have used the external GPS settings without problems.
A working setup for me for intermal GPS uses Other NMEA on COM 9 at a Baud Rate of 19200. In the Tomtom settings.
All other GPS programmes I use are set to COM9
When I setup the bluetooth I have it set to:
Serial Port (ticked)
Outgoing Port COM 9
Authentication (unchecked)
External GPS (in System menu)
(Perform a full backup before changes here - due to reports that changes here may ruin the GPS connection requiring a hard-reset to get it going again)
GPS Programme Port COM9
Hardware (None)
Access (Manage GPS automatically - ticked)
By the way the basic freeware plotting applications I use DO NOT require the clumsy workaround of starting tomtom in order to open the internal GPS. That problem seems to be limited to an issue with Google Maps.
NB
Other ports will work - eg COM0 but you must ensure that for example if you set outgoing port in bluetooth (if you also use BT GPS) to COM0 then it will also be COM0 in tomtom or any other GPS software. Any mismatch and you'll wait forever!
NB
In the tomtom satellite screen (the one that shows aseries of columns for each satellite - there is a useful verbal comment at the top of the screen it will say one of three things:
1
No GPS Device - (always says this initially for 2/3 seconds. If things are set correctly it will move to 2 but if your ports are wrongly set it will stay on this)
2
No Valid GPS Signal - (means it has found internal GPS device and is trying to find satellites - anything from 2 or 3 seconds to couple of minutes if you have not used Quick GPS, it will then move to 3 if you are in range of satellites)
3
Other NMEA GPS Receiver - (says this when locked on to satellites and working correctly)
The above 3 steps are useful to just check whether the setup and port is correct. Even if you do not want to use tomtom it's worth running it at least once just to iron out any port problems.
Mike

gogol said:
*** Can I use/install other maps?
Yes you can. You can purchase additional maps (maps only), and then activate it.
Click to expand...
Click to collapse
How?
I copy the folders of others maps into the microsd, bit if i go to settings- change maps I can't see them! Then i can't put the code to activate them!
What i'm doing wrong?

teresa said:
How?
I copy the folders of others maps into the microsd, bit if i go to settings- change maps I can't see them! Then i can't put the code to activate them!
What i'm doing wrong?
Click to expand...
Click to collapse
Use TomTom HOME program to install maps.
Richard

Thanks, very good thread indeed.

gogol said:
*** I dont have that executable file in my HTC Kaiser Application CD!
Yes, you are not alone, probably you purchased North America version.
You can also download it here:
http://rapidshare.com/files/56585274/6_032_8351.rar (this link might not be permanent)
Click to expand...
Click to collapse
Tried to install this 6.032 version on my TyTN II but got the following error on the device upon starting the installation: "Setup Error: Unable to install application. Please update your device ROM to the required version before trying again." - any ideas? Thanks ...
Would be happy to pay for the software / maps if they wouldn't it make all that difficult to get it installed for a trial ...

Maybe this is a dumb question, but I can't get the On board GPS to kick up and when I look under settings, the only thing there is "External GPS"....
How do you get it to use the internal GPS?

trjons said:
Maybe this is a dumb question, but I can't get the On board GPS to kick up and when I look under settings, the only thing there is "External GPS"....
How do you get it to use the internal GPS?
Click to expand...
Click to collapse
Are you sure u installed 6.032 Tom Tom release? Is the version caming with CD and is not in Tom Tom web. Is the only version that works with internal GPS; but youet guy. can have problems to install it, if you have a previous version.

There is no "internal GPS" icon in the "Settings", only "external GPS"
And dont mess around with the "external GPS", you might need to hard-reset.
TomTom 6.032 has its own setting to use the "internal GPS".
trjons said:
Maybe this is a dumb question, but I can't get the On board GPS to kick up and when I look under settings, the only thing there is "External GPS"....
How do you get it to use the internal GPS?
Click to expand...
Click to collapse

galahor said:
Are you sure u installed 6.032 Tom Tom release? Is the version caming with CD and is not in Tom Tom web. Is the only version that works with internal GPS; but youet guy. can have problems to install it, if you have a previous version.
Click to expand...
Click to collapse
I would disagree with that. Other versions of tomtom DO work. But in tomtom's "configure" select other NMEA instead of internal GPS
Mike

mikechannon said:
I would disagree with that. Other versions of tomtom DO work. But in tomtom's "configure" select other NMEA instead of internal GPS
Mike
Click to expand...
Click to collapse
I agree. I wanted say is the only version capable to tune internal GPS from Tom Tom program. I know versions 6, 6.02 and 6.03 works with othen NMEA and port 4, but my impresion is with internal get satellites faster.

Is there a way for TomTom to give the vocal instruction through the Bluetooth headset ?
Thanks
Jean-Yves

Anyone get a wrong rom error when installing 6.032? UK T-Mob.

Yes me too

As I understood, the T-Mobile version does not have TomTom Taster edition included in the application CD, correct???
If that's the case, I am afraid that the TomTom 6.032 from the HTC Kaiser "unlocked" version is a special build only for that unlocked model.
Just use 6.030, it works fine (read in the FAQ).

Yeah i guess if the rom numbers dont match up, it wont let you install. Not on Taster CD.
Using 60.30 now 8)

No TOMTOM love...
My Kaiser just showed up today and there' no TOMTOM on the apps cd.
What gives?
helm

I installed the Tom Tom and the one free Map, but I still have the same issue I had with Google maps of having to run GPS Viewer to start up the GPS.
I'm sure its a configuration issue for Tom Tom but I can't figure out what the problem is.

You got problem with Google maps and you thought that is TomTom configuration issue? ...
trjons said:
I installed the Tom Tom and the one free Map, but I still have the same issue I had with Google maps of having to run GPS Viewer to start up the GPS.
I'm sure its a configuration issue for Tom Tom but I can't figure out what the problem is.
Click to expand...
Click to collapse

Free Off-Line GPS Mapping

I found another FREE app.
Nokia is giving away for FREE a GPS software that makes possible something that even Google Maps can't: off-line mapping with use of GPS. Online mapping is not a big deal because Google, Yahoo, Microsoft and others offer it too, but with smart2go you can use GPS in combination with maps even when you are not connected to the Internet!
Here's the link to the review. From there, you can go to the site......
http://msmobiles.com/news.php/7180.html

Tested this on the N95 today and it was great, installed it on my Kaiser and it works well

I think this is much better than google maps. Gps located my location very quickly. Navigation is smooth and accurate(I think navigation lasts 3 days, I think). Very Nice me think

Thank you very much. Although I have a navigation software these cards are often better for walkers. That's why I installed Google Maps. Now I don't have to stress my free data volume so far.

I just wanted to Bump this. This is software is very handy, and FREE, and I didn't want it to get lost. Guys, you really need to try it!!!

I am confused as to what to do. I downloaded the software. But how do I get the maps on the phone?

seems to work fine on my att tilt (although i haven't left the house yet ).
freddiemac1 said:
I am confused as to what to do. I downloaded the software. But how do I get the maps on the phone?
Click to expand...
Click to collapse
you use your Wifi connection to download maps of the area you will going to, then, your phone uses it's GPS with the maps d/l'ed.

So am I correct in saying that as you surf the map using wifi etc. it stores the data on your SD card and uses it when you need it. So lets say you live in Louisiana, you can surf the whole state while on wifi or a router etc.. and it will store the map for later use??? is this correct???

seems like it still needs a data connection?
if youre driving, how can it use wifi if you cant connect to an access point?
that must mean it cannot download the map?

1. I go to ... http://www.smart2go.com/en/download/
2. select "Via PC"
3. all i am seeing is bunch of NOKIA softwares
the question is ... which particular model should we download for HTC? I selected the E95 model and I notice the file extension is slightly different, is "File: nokia_maps_1_0_upgrade_ROM.sis" instead *.CAB
any advise? thanks in advance.

It said to download the "Generic" one, that's what I did.
I am just not clear on down loading the map data!

so is this better than TomTom????
EDIT: never mind
"...although you can't do navigation (route calculation) for FREE with this program (Nokia demands money for that), you can however use it as a FREE map with GPS support!"

I have read a little more, will try downloading the map app

bengnism said:
1. I go to ... http://www.smart2go.com/en/download/
2. select "Via PC"
3. all i am seeing is bunch of NOKIA softwares
the question is ... which particular model should we download for HTC? I selected the E95 model and I notice the file extension is slightly different, is "File: nokia_maps_1_0_upgrade_ROM.sis" instead *.CAB
any advise? thanks in advance.
Click to expand...
Click to collapse
It's right there. The first option on that list is "Generic: Windows Mobile 5 Phone Edition".
And they also say: "Is your device not listed? Please choose the generic version for any unlisted devices that use Windows Mobile".

ok, I there has to be away to download a complete map instead of surfing the states to get some mapping data?????
Also were doesit store all its data?? I will look in the SD card.

Yes you can download the mapping data to your SD Card.
Use the mapping tool provided on the website.
You need to edit the qf file using notepad to say 1.3 rather than 1.1 or you cant do it.

I am downloading it now, and hopefully it is more accurate than google maps! BTW, is there any other gps software that i can use with my tilt??
Thanks.

Crap, i downloaded the generic version and i did not install on my Tilt. Any help??!!

so this is the only software that lets you use GPS without being connected to the internet?
i have the t-zone plan. it's probably too slow to use google maps gps right? or how does it work.. does it download ALL the directions at once, so that i would have to wait only 1-2 minutes max for each set of directions? or does it obtain the information right before i have ot make a turn and such?

Mobile GMaps working on Kaiser?

Hi guys... anyone played with the application http://www.mgmaps.com/ and actually got it to work with the internal GPS unit?
I've tried, but all I get is "GPS functionality not available on this phone".
Took a look on their support forum, and lots of others seem to be having difficulty getting this baby to recognize internal GPS units.
So,,, just thought I'd ask the experts...
/drt

They have a page that talks about how to fully set it up on a Windows Mobile device.
http://www.mgmaps.com/winset/
Look at step 13. "If you have an internal GPS on WM6, you can assign a virtual serial port to it with this GPSID Configuration utility." They link to a .CAB that you can download.
Try that.

clstan said:
They have a page that talks about how to fully set it up on a Windows Mobile device.
http://www.mgmaps.com/winset/
Look at step 13. "If you have an internal GPS on WM6, you can assign a virtual serial port to it with this GPSID Configuration utility." They link to a .CAB that you can download.
Try that.
Click to expand...
Click to collapse
Thanks for the idea, but it doesn't seem to make any difference. No mater what I set the ports to, I get the same message. Do you have settings which work?

i dont get it, why not just install the free google maps software?

Because it is software that amazingly can access arieal photos from many different sources, also sets up a storage for maps so you can use them offline and reload then instead of downloading the images everytime you start google maps. I am working on this and will post as soon as I have an answer.

IGO8

Hello everyone,
Does anyone know if there will be any way that we can use IGO8 on the Diamond?
I know that for them moment that is a no-no since there is an absence for a SD card, but is there a way that there will be a way around it ???maybe with the modification of the SYS.txt file?
Thanks

athosk said:
Hello everyone,
Does anyone know if there will be any way that we can use IGO8 on the Diamond?
I know that for them moment that is a no-no since there is an absence for a SD card, but is there a way that there will be a way around it ???maybe with the modification of the SYS.txt file?
Thanks
Click to expand...
Click to collapse
the internal 4GB memory in the Diamond is identified as a "Storage Device" so it shouldnt be a problem.

IGO 8 crash with Diamond...Look HERE

How did he test it?
You can run iGo8 only from the original SD-card (copy protection)!!!
It is not possible to copy the files an run it from another SD-Card.
So it will not be possible to use it on the diamond.
TDO

TDO said:
How did he test it?
You can run iGo8 only from the original SD-card (copy protection)!!!
It is not possible to copy the files an run it from another SD-Card.
So it will not be possible to use it on the diamond.
TDO
Click to expand...
Click to collapse
he tested it with cracked igo 8... so it is possible!

I had problems with iGO8 on my P3650 Touch Cruise and i found out that if you disable "Assisted GPS" it will work. I used Pocket Toolman to disable that. I did deleted those two files in the "2577" folder and made myself an shortcut that i placed in \Windows\Start Menu folder. Now it works like a charm. When you don't disable Assisted GPS it crashes all the time. Hope this will help.

You didn't read carefully ... :
MartinMystere said:
Hi Guys,
IGO 2008 crashes (it does not start up - AGPS is zerp by default enabling did not help either)
BR
Click to expand...
Click to collapse

I think discussion about illegal software is not really purposeful.
The original poster asked if he will be able to use iGo8 with the diamond.
And the answer is a simple no, as it only works with the included SD-card.
TDO

TDO said:
I think discussion about illegal software is not really purposeful.
The original poster asked if he will be able to use iGo8 with the diamond.
And the answer is a simple no, as it only works with the included SD-card.
TDO
Click to expand...
Click to collapse
It will work if you place it in the 4 gig space, make a shortcut of iGO.exe in \windows\Start Menu and it will start up and work just fine.

Sponzert said:
It will work if you place it in the 4 gig space, make a shortcut of iGO.exe in \windows\Start Menu and it will start up and work just fine.
Click to expand...
Click to collapse
No it will not.
It works only with the SD-Card it came.
iGo8 hast the same copy protection as iGo6 - the program ist bound to the specific SD-card.
Just ask navngo.
TDO

This is actually ridiculous: I get a GPS phone and can't install ANY GPS program on it? As far as I know, they all come on SD cards!

pedmond said:
This is actually ridiculous: I get a GPS phone and can't install ANY GPS program on it? As far as I know, they all come on SD cards!
Click to expand...
Click to collapse
its not the hardware manufactor's fault that the software developer cannot write a piece of software to function without a microSD card.

Sponzert said:
I had problems with iGO8 on my P3650 Touch Cruise and i found out that if you disable "Assisted GPS" it will work. I used Pocket Toolman to disable that. I did deleted those two files in the "2577" folder and made myself an shortcut that i placed in \Windows\Start Menu folder. Now it works like a charm. When you don't disable Assisted GPS it crashes all the time. Hope this will help.
Click to expand...
Click to collapse
What did you mean by crashes? I have a touch diamond and i have tried to install a version on my device.
What I have done is placed the two folders iGO8 and 2577 folders into the inboard storage of my phone I have then unplugged the phone from the data cable and it then asks me if i want to install iGO, i click yes and it installs, through the instalation, it asks me a unknown publisher wants to acces something, i just click yes, the installation ends up finishing and the program tries to load, then bang nothing, it just goes to the menu screen i was previously on, I then try to access the program through the start menu and programs folder, it tries to execute but then just stops. nothing happens. I have also tried the same thing after a soft reset.
is nthis the kind of issue you were having ?

saveferris said:
What did you mean by crashes? I have a touch diamond and i have tried to install a version on my device.
What I have done is placed the two folders iGO8 and 2577 folders into the inboard storage of my phone I have then unplugged the phone from the data cable and it then asks me if i want to install iGO, i click yes and it installs, through the instalation, it asks me a unknown publisher wants to acces something, i just click yes, the installation ends up finishing and the program tries to load, then bang nothing, it just goes to the menu screen i was previously on, I then try to access the program through the start menu and programs folder, it tries to execute but then just stops. nothing happens. I have also tried the same thing after a soft reset.
is nthis the kind of issue you were having ?
Click to expand...
Click to collapse
why don't you try running it by disabling A-GPS using PPC Toolman? The other member claims that with this way, he got it to run using another device though

athosk said:
why don't you try running it by disabling A-GPS using PPC Toolman? The other member claims that with this way, he got it to run using another device though
Click to expand...
Click to collapse
Exactly, thats what i did and it runs like hell. Sometimes you can go mad when you reboot and get that install again, just delete the two files from 2577 folder.

pedmond said:
This is actually ridiculous: I get a GPS phone and can't install ANY GPS program on it? As far as I know, they all come on SD cards!
Click to expand...
Click to collapse
Yes, but only navngo uses the SD card ID as copy protection. All other progams should function. E.g. TomTom will be included on the O2 version of the diamond.
TDO

athosk said:
why don't you try running it by disabling A-GPS using PPC Toolman? The other member claims that with this way, he got it to run using another device though
Click to expand...
Click to collapse
I couldn't even install that program PPC toolman, i downloaded the link on that page, I put the files on my internal storage and clicked on them through file manager, it just gave me an error message.
I even put the files in My device section of my hard drive and still nothing.
TBH, i have NFI what i'm gonna do next.

walshieau said:
its not the hardware manufactor's fault that the software developer cannot write a piece of software to function without a microSD card.
Click to expand...
Click to collapse
I totally agree - that was meant as a critique for the software houses. I'm buying the Diamond

saveferris said:
I couldn't even install that program PPC toolman, i downloaded the link on that page, I put the files on my internal storage and clicked on them through file manager, it just gave me an error message.
I even put the files in My device section of my hard drive and still nothing.
TBH, i have NFI what i'm gonna do next.
Click to expand...
Click to collapse
I have sent you a private message. Check that out and let us know the result. I don't have a Diamond but I got iGO8 working on a device with the SD card removed, so it should work on the Diamond as well...

david-v said:
I have sent you a private message. Check that out and let us know the result. I don't have a Diamond but I got iGO8 working on a device with the SD card removed, so it should work on the Diamond as well...
Click to expand...
Click to collapse
Can you please send me the info about IGO8 as well? I have the Diamond and will test it tomorrow. Thx

Installing Garmin Mobile XT on Diamond

Installation procedure:
a) Start installation of 'GarminMobileXTforWindowsMobile_42020w.e xe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_4xxxx.exe' for voice files.
c) Install 'GarminMobileXTFreeBasemap_4xxxx.exe' for Garmin's base map.
Click to expand...
Click to collapse
I have got the above instructions from a different site, but since the Diamond does not have a Storage Card, where I am supposed to install the Garmin app?
I have tried installing to the 4GB internal storage but it's not showing up during the installation as a storage destination. If it's not an option, will it eat up a lot of my valuable storage if I install to the phone default storage?
Also are there any alternative FREE GPS navigation software available for WM6 that worth checking out? This is my first GPS enabled mobile phone and I am anxious to try it out.
I am sorry if this has been answered before, but I have tried to search for an answer to this but not found any.

You install it to "Internal Storage" but that will be obvious because this is the only choice the garminxt install will give you.
I've been playing with GarminXT and so far I prefere it over TomTom.

So how memory would I have left with after installing the main application, the support files and the maps ? I wish if there a way to install to 4GB internal storage instead if using the default phone storage.

Internal storage is the 4GB. Depending on the maps you have... I have a full install of worldwide base + support files + detailed Canada takes up about 200mb... where I have TomTom I can't just chose detailed canada its all of NA or nothing and it takes up 1.4GB.

Go to Device Settings -> Connections -> USB to PC
Once you are inside here, select "Disk Drive (Faster File Transfer)" and also "Ask about connection type when I connect"
This way, when you connect your device to the PC, you can choose wether to enable ActiveSync or Disk mode.
For this specific case, to install Garmin, choose "Disk mode"...this emulates a removable storage on your PC, and then Garmin will detect this.
This is how I've done it, and worked 100%.
Bye

s1rl4ncel0t said:
Go to Device Settings -> Connections -> USB to PC
Once you are inside here, select "Disk Drive (Faster File Transfer)" and also "Ask about connection type when I connect"
This way, when you connect your device to the PC, you can choose wether to enable ActiveSync or Disk mode.
For this specific case, to install Garmin, choose "Disk mode"...this emulates a removable storage on your PC, and then Garmin will detect this.
This is how I've done it, and worked 100%.
Bye
Click to expand...
Click to collapse
Thank you for this tip. This is what I was looking for. Will try it out once I am back home.

Ok I have managed to get Garmin successfully installed in my Diamond However when I installed the files using the 'disk mode' option, I had to disconnect the the USB cable to complete the software installation in my phone as it did not prompt me for any additional steps in the phone when the USB cable is still connected.
Anyways, thank you all for your assistance. I am glad to have found this resourceful forum.

alhinai said:
Ok I have managed to get Garmin successfully installed in my Diamond However when I installed the files using the 'disk mode' option, I had to disconnect the the USB cable to complete the software installation in my phone as it did not prompt me for any additional steps in the phone when the USB cable is still connected.
Anyways, thank you all for your assistance. I am glad to have found this resourceful forum.
Click to expand...
Click to collapse
When the phone is in disk mode the phone itself is not able to see the internal memory. This prevents you from possible locking of files by the phone while trying to manipulate via PC.
Activesync works just as fast as disk mode, it is the phone's usb speed that makes the difference with the diamond.

oke Garmin is installed. But I like to install the maps. But have some problem with the devicecode

vipinholland said:
oke Garmin is installed. But I like to install the maps. But have some problem with the devicecode
Click to expand...
Click to collapse
In Garmin go to settings / about - you will see your Card ID number (internal storage) if it's what you are looking for ... other device IDs are also listed.

tc816 said:
In Garmin go to settings / about - you will see your Card ID number (internal storage) if it's what you are looking for ... other device IDs are also listed.
Click to expand...
Click to collapse
THANKS I will try if it's works

I have a problem with my Garmin (last version, with Western Europe map NT2008 and basemap)...
The map is very slow, and very inacurate
Any ideias why, and how I can fix it?
Bye

s1rl4ncel0t said:
I have a problem with my Garmin (last version, with Western Europe map NT2008 and basemap)...
The map is very slow, and very inacurate
Any ideias why, and how I can fix it?
Bye
Click to expand...
Click to collapse
try disabling touchflo 3d report back if that increase sperformance.

Ok, probably an easy one this, but I've installed Mobile XT on my diamond but when I fire it up it tries to look for a bluetooth GPS reciever. How do I tell it to use the built in unit on the diamond?? Thanks

clemo71 said:
Ok, probably an easy one this, but I've installed Mobile XT on my diamond but when I fire it up it tries to look for a bluetooth GPS reciever. How do I tell it to use the built in unit on the diamond?? Thanks
Click to expand...
Click to collapse
Settings - System
Remote GPS
Hit Enable
Hopefully that should work

Enable?
I have the same problem
Could you be a little more precise about "Hit Enable"?
I don't have that setting under Settings-System in-Remote GPS
And shouldn't it be a setting somewhere inside the Garmin application since there is no problem using Tomtom with the internal GPS?
But in Garmin I can´t find anywhere to change GPS-settings and when I go into the settings about gps in Garmin it starts looking for a bluetooth gps right away with no possibillity to change.

When I said - SETTINGS, SYSTEM
I meant the ones in the GARMIN APPLICATION!

L o r d R a j said:
When I said - SETTINGS, SYSTEM
I meant the ones in the GARMIN APPLICATION!
Click to expand...
Click to collapse
Oops Sorry
When I go to Settings-System the number one choice there is External GPS and when I click that I get the message "Only connections to Garmin GPS-unit is allowed" ???
/M

You need to unlock your GPS or rather the Garmin XT software for it to work with your internal GPS. You do this by using JetMouse Keygen 1.3 (or 1.5) and pasting the generated code based on your Device ID (explained in a previous post where to find that) into a txt file called sw.unl (note pls make sure that the .txt extension is changed to .unl) to be placed into your garmin folder. For JM just google for it.

ionrage said:
You need to unlock your GPS or rather the Garmin XT software for it to work with your internal GPS. You do this by using JetMouse Keygen 1.3 (or 1.5) and pasting the generated code based on your Device ID (explained in a previous post where to find that) into a txt file called sw.unl (note pls make sure that the .txt extension is changed to .unl) to be placed into your garmin folder. For JM just google for it.
Click to expand...
Click to collapse
OK Thanks.
I suppose if I had been more patient and read all of the threads more thorough, I should have discovered that.
When I saw your answer I recognized it but couldn't make the connection to my problem.
Sorry all, for repeating things that I most certainly should have been able to have found in earlier threads, but never the less many thanks for the input.