Has anyone else experienced a problem where battery meter sticks at around 65% despite being fully charged. When soft reset it goes to 100%.
It's not a battery cell issue - battery life is fine. It's simply a meter misread.
Not that i have noticed although ill say that the battery meter on the Diamond isnt all that great...its not really a good indicator as to how long the battery has before it goes dead.
Yup, mine tends to stick at 80%. At least it did in ROM 1.35. Burned yesterday the official 1.37 and we'll see how it goes...
sometimes, mine is also doing it...still cant figure out why thou...
OK, with the new ROM, the phone connected to the PC charged smoothly from about 46% to 100%. I'll see probably tomorrow if the charger makes any difference.
How long do you find the battery takes to charge from around 15% to 100% using the power pack, not computer connection???
Hi Guys,
Does anyone has more info about this ?
When i charge my device (from charger or by PC Usb), it won't go pass 89% battery charge, therefore never warns me when it's complete.
I know it charges to 100%, so it seems to be a problem with the software.
This is quite annoying, has i never get the "Battery Charged Warning" while plugged in.
My ROM Version (Original) 1.37.410.3 PTG
Cheers and thanks.
Anyone still experiencing a flakey battery meter? Sometimes mine will read 90%. Then, within two minutes it will be down to 45%. But if I soft reset, it will go back up again. Some days it's all over the place and I actually have no idea what the battery level is.
I'm using QuickMenu. Anyone have any suggestions or similar experience?
Happened to my unit as well. It doesn't happen all the time though. Sometimes it will charge up to 100% just fine and other times it hangs somewhere between 70-90%.
I've this problem, the battery meter indicates for a lot of time the same value (eg. 98%) but if i'll reset the phone i can see the real value (eg. 45%)
it's very strange
rom Aztor
NightWolf88 said:
How long do you find the battery takes to charge from around 15% to 100% using the power pack, not computer connection???
Click to expand...
Click to collapse
depends on what current the powerpack is supplying, it will probably be either 500mA (0.5A) or 1A. Obviously the higher the current the quicker it will charge.
A PC USB connection can provide 500mA maximum, where as a mains carger will supply 1A or 2A (think its 2A if you have a proper Diamond charger).
A car charger will vary, when the engine is off you will get 1A if you are lucky. With the engine running you will get 2A, but during the engine starting you can get a peak of up to 5A (phone killingly good).
All of these measurement can vary!
i have the same issue, too
yes. my battery meter is incorrect, too. exact same behaviour as you mentioned. 65% -> after reset 100%. nearly all the time. that's very bad, because my battery lives about 1 day without charging and in the evening i don't know how full or how empty my battery is. sometimes the remaining 8 % are real 8 % and sometimes (after a restart again) the shown 8 % are more then 30 %.
I've tried about 6 roms and get the same thing with all of them. It happens infrequently but is still annoying. Basically, if I'm suspicious of the battery level, I soft reset to verify.
it's "normal" that behaviour, because also battery check is made by OS (WinMobile) at prestabilite polling times, search in the registry for "batterypoll" and you'll see a value expressed in seconds (I suppose they are secs), try to lower those values and see what happens, of course shorter polling times drain battery faster
bye,
davide
Any solve for this now?
I also have this problem, sometimes only but still very anoying.
A soft reset seem to be the only solution at the moment.
It happen to me always too!
It was 40%, after I played Monopoly games for 1 hour, it still showed about 39%. When I soft-reset, now it show only 25%. What a huge drop!
im also getting this problem.. anyone has gotten a solution to this yet??
Maybe worth a try.
http://www.pocketnow.com/index.php?a=portal_detail&t=news&id=6369
I think that why TF3D doing reset during night while charging...
I disable TF3D every night, so no reset at night but as side effect sometimes battery does'nt arrive to 100%
My diamond has sometimes the same behavior. The battery gauge sometimes showes only 50 percent or so and after a soft reset it showes full. I had this issue a few months ago, too. The the battery gauge showed correct values and now I have the same issue again.
I am pretty sure it is some kind of a software problem, but I have no idea which software disturbs the battery gauge. I had this issue never with my touch, but only with the diamond. I anyone has suggestions ülease let me know! Thank's a lot.
Related
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
kenny89 said:
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
Click to expand...
Click to collapse
Definatly sounds like a faulty cell in your battery
At least its not the phone thats broken, a battery is easily replaced.
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Its unlikely its the hardspl. I would guess hardware issue, but if it charges while off then thats unlikely too.
I assume you've tried a hard reset already to rule out any application interferring with it?
Also what happens when you plug into your PC? same thing?
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
3) Hardware issue with the phone - that would just suck!
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
kenny89 said:
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
Click to expand...
Click to collapse
A fully charged cell has about 4.3v across it. As its drained of current the voltage drops to about 3.3v, when its fully depleted.
The phone uses this voltage level to display the current capacity of the battery
If a cell fails in the battery, as its capacity reduces its not able to provide enough current. Power = current x voltage
If the phone tries to draw normal current, the voltage drops excessivly to conserve the above formula. This shows in the phone as a decrease in battery capacity. The voltage across the battery drops to below 3.3v before the remaining cells are depleted, and although there is still enough current to suply the phone, there isnt enough voltage. Overall there isnt enough power (P=IV)
A rested battery may show enough voltage for a short while (when you first put it in) but the voltage will drop drasticly as soon as any significant current is drawn.
This is a really common failure in a bettery, and you can spot it very quickly when you see sharp drops in the battery meter.
someone1234 said:
I
Also what happens when you plug into your PC? same thing?
Click to expand...
Click to collapse
Yes, same thing...
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
Click to expand...
Click to collapse
Don of course and even reflashed without installing any application, just synced with PC... same issue. In the mean time I even reflashed the stock SPL to try... and the Diamond is now charging in Off modus, so I'll turn it on tomorrow to give it a trial
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
Click to expand...
Click to collapse
I guess the Battery has an issue, but none is available quickly in my country, I'll have to try to order one abroad... let's check...
Thanks anyway for your advices...
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
Check the current on the 3rd party charger.
kenny89 said:
(adapt htc, specifications are the same of the original adapter)
Click to expand...
Click to collapse
output 5V/1A , same specs. input is a little different (110-220hz, 0,2A) against (110-220hz, 0,15A).. but that isn't a problem right? The output is the same.
Thats really strange. Yeah its the output that matters,
There should be no difference at all!
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
XzaniX said:
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Click to expand...
Click to collapse
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
kenny89 said:
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
Click to expand...
Click to collapse
That noise is caused by a harmonic of the GSM signal. It sounds like the grounding is not correct, either for the speaker or possibly a whole section of the circuit.
Not good!
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
bakman said:
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
Click to expand...
Click to collapse
-hi Bakman, of course this was my first check Anyway, is getting worse, now it even won't charge when switched off So I'll send it for repair I guess... I hate to wait for a new device, pay a huge amount of money for it and when you finally get it, it's defective
robinbb said:
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
Click to expand...
Click to collapse
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Ildefonse said:
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Click to expand...
Click to collapse
Sounds definately like a s/w problem to me, they will have to provide a fix in a ROM update I guess. Mine is OK at the minute though. Is yours UK or grey import?
Err, I bought the WWE version in Holland. Actually someone bought it for me, but that's not the point.
I did find out that using the advanced config tool to disable the setting "GPRS auto attach" really saves a lot of battery power! Yesterday my phone was idling the whole day and night, and battery only dropped 10-20%.
My diamond don't stop to charge.
I've tried with an extended battery (cheap 1800mAh) and with the official one, after a whole night (12h), my diamond is still charging.
Confirmed with PowerGuard after few tests,10h of charge , it mesure about 100 -120mA battery current, the battery voltage is 4,192-4,195 V.
Tested on wall charger and Usb.
Is anybody has the same issue?
Mine (ignito - o2's version of the diamond) does exactly the same thing. If I leave it charging over night the round led still flashes and it only shows about 80-90% charge.
However, if I do a soft reset, battery life is back to 100% and works like it's at 100%.
I've looked around and I think a few other people are having the same problem.
Update: Tried a Charger for a blackberry phone and it charged to 100%, maybe there's a problem with the wall charger?
Mine shows 99%, maybe it stuck on 99%.
If i reset it shows 100% too...
For the wall charger could you check the voltage a the end of the charge with PowerGuard
http://forum.xda-developers.com/showthread.php?t=375292&highlight=Powerguard
Mine just sticks on a random number.
Did a complete discharge then partial charge and now it won't go past 69%! I'll do a complete discharge and full charge and see what happens...
sounds like the battery is not telling the phone the truth...
The battery has a feedback built in, which tells the phones software what charge it has, it may be a faulty battery.
ive never had a wm device that dispalyed battery correctly...live with it
Well, I managed to sort my problem out with a hard reset.
Battery life, as expected, still isn't great (or rather hasn't changed), but now the phone charges to 100% every time. Not sure whether this is a fluke or not though...
I think that why TF3D doing restart at night while charging
Did You restore Your diamond after the hard reset? And if You did so is the charging behavior still correct?
The battery issue was caused by the demo version of Navigon MN7. After uninstalling this software everythig works fine.
ernst12345 said:
The battery issue was caused by the demo version of Navigon MN7. After uninstalling this software everythig works fine.
Click to expand...
Click to collapse
I have no Navigon comes with my Diamond..
I have exactly the same problem as (theboostman).
I dont thing is the battery i will send it to HTC to fix it.
I would make a hard reset before sending the diamond to htc. After doing a hard reset my diamond worked and charged well. Also try to charge your diamond in "switched off mode" (I mean holding the on/off button for 3 seconds...). Im sure the led ring will show ou a full battery within 1.5 hours!
I am not sure which software changes the settings for charging, but I am sure it is not the hardware
Could anyone tell me the default registry entry for batterypoll? Thanks!
I charged my X1 with wall adapter. But after 2 hrs, the phone is still charging.
See the battery meter it has reached 100%. Then wait another hrs, the phone is still charging. After almost 4 hrs, the illumation light is finally off.
Q: Is it ok? Does it happen to yours?
dosen't wake up
after the x1 charges to full battery, the device dosen't wake up on pressing the power button, this thing is new, almost few weeks, i don't understand, is a hardware problem or a rom problem... can anybody help me with this,
ps... the xperia illum lights dosen't turn off after charging, and charger disconnected they still blink
It's normal behaviour of the Xperia X1 to keep charging when the battery meter has reached 100 %. And it's also common for the charging process to take some time. I don't know exactly how long the process takes because I usually charge the battery during the night but charging an empty battery is certainly not accomplished in under an hour.
Your second problem could be a software issue. What rom is installed on your phone? Custom or stock? Have you tried a hardreset yet?
It happens to all X1. AFAIK, it's okay to disconnect the charger after X1 reach 100%, no need the blink to be stopped. The same thing is happened to my previous HTC too.
I don't know any Windows Mobile Phone that stops charging immediately when the battery meter has reached 100 %. One reason is that the meter only measures in 10 % steps. So when it reaches 100 % it might only be 96 %. To charge the battery completely you have to leave it connected until the leds stop indicating the charging process.
Okay guys, I got u people's meaning, yeah I remember that it was happened to my elder PDA too, O2 mini. Thank you people, to spend your time. Sorry bother you.
I just got the OTA update from KitKat to Lollipop (5.0.2) yesterday and I've noticed terrible battery life and very slow charging since then. My phone is always in its charger overnight and when I remove it from the charger in the morning it usually easily lasts until I put it in the charger at night again. During the daytime I do a lot of stuff on it (whatching youtube videos, listen to internet radio, whatsapp, internet browsing, making phonecalls etc).
This morning I removed it from the charger and hardly didn't do anything on it for the first two hours. When I wanted to send a whatsapp, I noticed battery had already fallen to 70% in only 4 hours or so - 4 hours of doing nothing while the phone was in energy savings mode! Half way through the day, with only some whatsapping, battery had fallen to 20%. When I connected it to the charger, it instantly dropped to 8%. After about an hour of charging, it was at 17% and said it would last another 6 hours before the phone would be fully charged. Usually I charge my phone in 1.5 - 2 hours!
When I did the update, I didn't do a factory reset and I would like to only do that as a last resort.
If I look at te battery statistics, I don't see any app using an obscene amount of battery life - the highest being Google Play services with 15%. But what I do notice is that "Cell standby" is responsible for 29% of the battery drainage.
Before I do a factory reset, anyone any tips?
Zippy1970 said:
I just got the OTA update from KitKat to Lollipop (5.0.2) yesterday and I've noticed terrible battery life and very slow charging since then. My phone is always in its charger overnight and when I remove it from the charger in the morning it usually easily lasts until I put it in the charger at night again. During the daytime I do a lot of stuff on it (whatching youtube videos, listen to internet radio, whatsapp, internet browsing, making phonecalls etc).
This morning I removed it from the charger and hardly didn't do anything on it for the first two hours. When I wanted to send a whatsapp, I noticed battery had already fallen to 70% in only 4 hours or so - 4 hours of doing nothing while the phone was in energy savings mode! Half way through the day, with only some whatsapping, battery had fallen to 20%. When I connected it to the charger, it instantly dropped to 8%. After about an hour of charging, it was at 17% and said it would last another 6 hours before the phone would be fully charged. Usually I charge my phone in 1.5 - 2 hours!
When I did the update, I didn't do a factory reset and I would like to only do that as a last resort.
If I look at te battery statistics, I don't see any app using an obscene amount of battery life - the highest being Google Play services with 15%. But what I do notice is that "Cell standby" is responsible for 29% of the battery drainage.
Before I do a factory reset, anyone any tips?
Click to expand...
Click to collapse
This is directly from HTC tech support. To recalibrate battery and HTC charger when battery rapidly or erratically discharges, this procedure clears all battery stats, coordinates and normalizes charging.
Turn off Fast Boot in settings. Power off phone.
Plug phone into HTC wall charger and charge for two minutes or more
While charging, hold down volume up+volume down+power button and continue holding
Phone will turn on and off repeatedly every 15 seconds or so while continuing to hold all three buttons
Keep this going for 2 minutes, then release buttons WHEN THE PHONE IS ON
Now, let phone charge fully normally (with phone either on or off--doesn't matter) and battery level reporting, charging and battery life should be normalized.
Do this every month or so to keep power system healthy--even if everything seems fine. Also, don't leave phone on charger overnight for best long term battery life (according to HTC tech support: "The first thing they tell us." This is true even though charging is supposed to turn off when battery is at 100%)
Battery recalibration ... Many techs say it's a placebo. But, I will follow this manual, just in case.
I do confirm, though, that with L 5.0.2 charging takes longer, phone drains faster with the same as before apps and usage, phone is often hot, and I've started to get regular 'can't charge, your phone uses more power than available from charger'.
Re phone uses more power than available, it happens with all three original HTC chargers I have, so I have to use the charger from an Asus tablet (1.5A output).
I haven't done the recalibration thing but I did some measurements and I now know why it's charging so slowly, just not what is causing it. The phone isn't switching to high charging mode and keeps charging at around 400mA. This means that when using the phone, it's draining faster than it can charge. I also think it's not switching to standby mode causing the high drain. Often the phone gets hot when it's in my pocket (when it is supposed to be in standby mode) meaning something is still draining the battery fast.
I will do the calibration thing and see if that helps.
I just did the reset thing (holding power + vol up + vol down) for two minutes. It's now charging but I can see it's still not charging in high mode. It's still charging at only 400mA.
Edit: Phone says it wil take 10 hours to charge (it's at 30% now).
Annoying, I know, but I'd factory reset the phone just to make sure the update has 'taken' correctly
Zippy1970 said:
... The phone isn't switching to high charging mode and keeps charging at around 400mA. ...
Click to expand...
Click to collapse
Sounds logical. How did you find it out? Instrumental, or through a phone menu?
I have checked Setings/Power. Mine says Charging on AC, which supposedly means high charging mode.
PS. Again, whatever it might mean, when I get a 'phone uses more power than..' error, I connect the phone to a 1.5A charger (compared to original HTC 1.0A) and it solves the problem. I'm not happy with this solution, though.
zeemenshater said:
Sounds logical. How did you find it out? Instrumental, or through a phone menu?
Click to expand...
Click to collapse
There are a few ways I can measure this. I have a "Charger Doctor", one of those inline USB voltage/current meters and I have an "Energy Meter" which measures wattage going out of a 110/220V socket. Both confirm each others measurements. The Charger Doctor says my phone is being charged at 5.1V at 0.4A, and the energy meter says the charger consumes about 2.5W which is about right (the charger looses some energy through heat and the Charger Doctor consumes a bit of energy as well).
But...
To be sure, I tested a few different (but identical) chargers and changing the charger made no difference. But - and here comes the strange part - I tested about 20 different USB cables and with only two my phone charged at 1.0A (which I assume is the M7's max charging current). With all the others it charged with 0.3A-0.5A. Only with those two cables it charges in high charging mode. So apparently something changed in the charger detection. Before the update I was able to charge the phone in high charging mode with other cables as well.
Also, it seems like it's now discharging not as fast as before, but I will be sure tomorrow after it has fully charged and after I've used it all day.
Edit: Yep, charging is at it's normal speed now. It's at 60% and the phone says it will be 1 hour and 1 minute until it's fully charged.
Edit2: Of the two cables it charges at 1.0A with, one is the original charger cable that came with the HTC, and the other is a cable that came with a Duracell Power Bank.
Well, after the three finger calibration, charging seems faster, and I think battery holds longer (or maybe I want to think it does, because still not sure).
One additional observation is in about 20% cases my phone is stuck during boot until I connect or disconnect the charger for a second. By connecting or disconnecting the charger, something triggers the power state and the phone boots normally.
So yes, you may be right about new power management in Android 5.
(I'm now on IC7.0.0 + ElementalX 20.0, HTC M7 Int'l))
Well, even though charging times seem normal now, it is slightly erratic. I can see the percentage making jumps up and sometimes down while charging.
Also, battery life still is very poor. Battery now lasts until halfway through the day while before it would easily last all day...
Is there a way to revert to KitKat? Other than a lot of annoyances I haven't noticed a single advantage using Lollipop.
Seanie280672 said:
This is directly from HTC tech support. To recalibrate battery and HTC charger when battery rapidly or erratically discharges, this procedure clears all battery stats, coordinates and normalizes charging.
Turn off Fast Boot in settings. Power off phone.
Plug phone into HTC wall charger and charge for two minutes or more
While charging, hold down volume up+volume down+power button and continue holding
Phone will turn on and off repeatedly every 15 seconds or so while continuing to hold all three buttons
Keep this going for 2 minutes, then release buttons WHEN THE PHONE IS ON
Now, let phone charge fully normally (with phone either on or off--doesn't matter) and battery level reporting, charging and battery life should be normalized.
Do this every month or so to keep power system healthy--even if everything seems fine. Also, don't leave phone on charger overnight for best long term battery life (according to HTC tech support: "The first thing they tell us." This is true even though charging is supposed to turn off when battery is at 100%)
Click to expand...
Click to collapse
that wouldn't work for me i don't have fastboot
carinfex said:
that wouldn't work for me i don't have fastboot
Click to expand...
Click to collapse
lol :silly: you cant rule out that it wont work just because HTC decided to remove the software switch in the power options in its later updates, do the rest of it and skip that part, I dont have the option for fastboot either anymore.
Seanie280672 said:
lol :silly: you cant rule out that it wont work just because HTC decided to remove the software switch in the power options in its later updates, do the rest of it and skip that part, I dont have the option for fastboot either anymore.[/QUOTE
i have done everything i can i even have a battery saver but soon as i put wifi on it just drains so fast maybe a new battery will help as this phone is like 2nd hand so maybe battery dying
Click to expand...
Click to collapse
Factory reset
I had terrible battery problems after T-Mobile upgraded my HTC One (M7) to Lollipop. The phone was constantly awake and churning with the GPS probing for a signal every few seconds. I'd lose 50% of my battery in a couple of hours. I went through the battery recalibration suggested by HTC support, but it didn't work well. Finally I did the factory reset. It worked perfectly! Now my battery life is better than ever and the phone will go well over 24 hours on a single charge with normal usage. Recovering from the factory reset was easier than I anticipated. Google Play Store remembered and reloaded all my apps automatically. The only headache was having to log in to everything again. Well worth the effort.
I did a factory reset as well and it looks like it has improved battery life. I'm still on my first day after the reset so I won't be able to really tell after I've used it for a couple of days. But like I said, the hard reset seems to have made a difference.
It has been 15 hours now since I unplugged the phone from the charger and it still has 43% left. But I just noticed a few minutes ago that two energy settings were set different than before the hard reset. Screen brightness was set to auto (when before I had set it to it's first dim setting), and data connection was set to switch off after a long period of inactivity. (while before it was set to always on). I've changed those settings and see if that makes a (big) difference.
Zippy1970 said:
I did a factory reset as well and it looks like it has improved battery life. I'm still on my first day after the reset so I won't be able to really tell after I've used it for a couple of days. But like I said, the hard reset seems to have made a difference.
It has been 15 hours now since I unplugged the phone from the charger and it still has 43% left. But I just noticed a few minutes ago that two energy settings were set different than before the hard reset. Screen brightness was set to auto (when before I had set it to it's first dim setting), and data connection was set to switch off after a long period of inactivity. (while before it was set to always on). I've changed those settings and see if that makes a (big) difference.[/QUOT
leave your wifi on for about a hour then tell me if any different
Click to expand...
Click to collapse
carinfex said:
leave your wifi on for about a hour then tell me if any different
Click to expand...
Click to collapse
I have Wifi always on.
Tested it for another day and battery life has definitely improved quite a bit but it's still nowhere near what it used to be with KitKat.
Zippy1970 said:
I have Wifi always on.
Tested it for another day and battery life has definitely improved quite a bit but it's still nowhere near what it used to be with KitKat.
Click to expand...
Click to collapse
when i woke up this morning my m7 was 100% it's now 11;10 and it,s now 70%
I'm getting exactly the same problem.
HTC support said they never heard about such a problem and their conclusion is to send the phone to be repaired
I don't know how to rollback to previous version and it doesn't looks like to be a new fixed version on the way.
Or at list I haven't heard about it.
I also noticed it doesn't make much of a difference if I turn on energy savings mode.
With KitKat, my phone would easily last the whole day without energy savings mode. Now with lollipop I have to hook it up to a charger in the evening - even with energy savings mode enabled.
The thing that sucks the most is that my phone drains in alarming rate when playing a game, or listening to online radio or watching youtube videos. 30 minutes and battery drops from 100% to 50%. And the phone gets really, really hot. Before lollipop, it would drain perhaps from 100% to 85% and the phone would not heat up at all.
There are so many annoying bugs/features with lollipop, I'm considering an iPhone for the very first time ever as my next phone. Mind you, I've never been a fan of Apple stuff. But Android is just getting ridiculously bloated and simply doesn't work very well anymore. It looks like every update makes my phone less usable. And I hate the fact Google thinks it's perfectly fine to disable/remove stuff that people have come to depend on. Like my notes (amongst man other things). Google in all its wisdom has removed the Notes app making all my notes inaccessible. The only way to get my notes back is to install some third party app from the Play Store and have it transfer my notes to the cloud. First of all, I don't want a third party app handling my notes. And I most certainly don't want my notes stored in the cloud. I travel quite a bit and I don't have internet access everywhere I go, making my notes inaccessible again.
Has anyone else notice problems charging yet?
When charging using the supplied adapter, the battery percentage stops increasing at some point. 46% or 67% etc it just stays stuck even though the charging symbol remains.
The phone stays hot like it is charging, but it still says '46% 1 hour remaining to fully charge etc'. If you leave it for an hour, it stays at 46%. If you unplug and restart the phone, it will be at 100%.
I hope this is a software bug? It seems others are impacted too. google support link below.
https://support.google.com/pixelphone/thread/77815758?hl=en
Mine is working fine
Same error, but on 92%. I didn't restart the phone, and after 5 hours without charger battery level went down normally.
mcgon1979 said:
Has anyone else notice problems charging yet?
When charging using the supplied adapter, the battery percentage stops increasing at some point. 46% or 67% etc it just stays stuck even though the charging symbol remains.
The phone stays hot like it is charging, but it still says '46% 1 hour remaining to fully charge etc'. If you leave it for an hour, it stays at 46%. If you unplug and restart the phone, it will be at 100%.
I hope this is a software bug? It seems others are impacted too. google support link below.
https://support.google.com/pixelphone/thread/77815758?hl=en
Click to expand...
Click to collapse
Same for me here. I'm monitoring the issue until next week and then decide what to do
mcgon1979 said:
Has anyone else notice problems charging yet?
When charging using the supplied adapter, the battery percentage stops increasing at some point. 46% or 67% etc it just stays stuck even though the charging symbol remains.
The phone stays hot like it is charging, but it still says '46% 1 hour remaining to fully charge etc'. If you leave it for an hour, it stays at 46%. If you unplug and restart the phone, it will be at 100%.
I hope this is a software bug? It seems others are impacted too. google support link below.
https://support.google.com/pixelphone/thread/77815758?hl=en
Click to expand...
Click to collapse
Surely that just sounds like a software issue or glitch. It's not stopped charging, it's just not updated correctly?
superleeds27 said:
Surely that just sounds like a software issue or glitch. It's not stopped charging, it's just not updated correctly?
Click to expand...
Click to collapse
yes it appears that way. hopefully.
Hi ! Mine is stuck at 100% after charging at night. I use the google pixel stand. After rebooting battery falls down rapidly to the correct amount but it gets stuck everytime I charge it back fully with the stand. I'll need to try with wire charging though to see if the issue is the same.
No such issue with my Pixel 5 Sorta Sage here in Australia. Sounds like a software glitch though. Had mine for 3 days now and it's been going really well. I'm also not seeing this "gap" issue that others have mentioned either.
After my pixel shutted down at 1% battery (24 hours standby and 7.5 hours of screen)
I put it to charge and turned it on and left it charging.
I came back later. And the phone was at 1% level still charging. With battery saver enabled
I restarted and the phone was already at 100%
What the hell is going on.
I used my Pixel 4 charger instead of Pixel 5 but they look like the same charger with type C power delivery
Sent from my Pixel 5 using Tapatalk
Mine has this issue too - same with different adapters, but doesn't happen every time with the same adapter. When plugging in it will go up a couple of % over a few minutes, then gets stuck - it might go up another percent randomly here and there, but not at the "actual" rate that it's charging.
Restarting seems to force it to update to the correct charge percentage, but not to carry on increasing at the correct rate. Tempted by a factory reset!
alastor2004 said:
Mine has this issue too - same with different adapters, but doesn't happen every time with the same adapter. When plugging in it will go up a couple of % over a few minutes, then gets stuck - it might go up another percent randomly here and there, but not at the "actual" rate that it's charging.
Restarting seems to force it to update to the correct charge percentage, but not to carry on increasing at the correct rate. Tempted by a factory reset!
Click to expand...
Click to collapse
Mine got stuck at 69% for over 12 hours, i had to do a factory reset for sending the phone back anyway and it was still at 69% after the factory reset. So i don't think factory reset will do any good. Probably a software bug they need to fix.
I've also just seen this, the charge indicator got stuck at 47%, when reconnected the charging cable, the charge indicator quickly got up to around 80% and then carried on at a normal pace.
Same here. Stuck at 44%, then 88%, then 100%, then 96%. Some people were suggesting that it's a bug related to the far-right icons in the customization of the launcher. Don't know if that's true but defenitely will give it a try
There is some update in Pixel forums. According to it, will be fixed in a future software update.
https://support.google.com/pixelphone/thread/77815758?hl=en&msgid=78785427
Sent from my Pixel 5 using Tapatalk