My Friends.
I upgraded my BA to a WM6 rom. In first boot BA stucked in tri-colour screen. After some reading here I managed to boot it in WM6 after using NO/YES/YES in the format screen + mail key.
The problem: Now I have no radio rom. and, the uppagrade utility wan't put the radio rom in the device.
What can I do in this situation?
Thanks for your help
Not sure I can help, but.
I have had the same thing happen to me, and I have tried the first few of BA_Radio_1.15_Upgrade , but can not find the ship rom files.
If you have any luck with anything please let me know.
try this
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
David389 said:
try this
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
Click to expand...
Click to collapse
That is the URL I referenced above in the previous post. does anyone have other suggestions?
I do appreciate your help. Thanks for replying.
try the Cab file on here
http://forum.xda-developers.com/showthread.php?t=410074
I had a similar problem..
I put my phone into bootloader then ran the upgrade
Not sure if it will word.
Other possibility is going back to WM2003 upgrade radio to 1.15 then ROM
David389 said:
try the Cab file on here
Other possibility is going back to WM2003 upgrade radio to 1.15 then ROM
Click to expand...
Click to collapse
when I start to do the upgrade it shows the radio version as none, will the down grade allow the radio to come back?
My wife and I both got the SX66 (cingular) at the same time. She does not want to modify or upgrade hers until mine is working. Is there any way to clone her roms and write them back to mine so that I can "start over"?
Related
Hey gus,
New to this forum. I was trying to upgrade my ba from 1.22 to 1.4 and somehow I think I got stuck in the bootloader screen. I downloaded the rom directly from clubimate. My problem is when I run the rom it gets stuck when it tries to upgrade the radio. Now my phone is totally non working, it starts once in a while but only to the bootloader screen.
Any advice would be great.
Thank you guys.
jksour said:
Hey gus,
New to this forum. I was trying to upgrade my ba from 1.22 to 1.4 and somehow I think I got stuck in the bootloader screen. I downloaded the rom directly from clubimate. My problem is when I run the rom it gets stuck when it tries to upgrade the radio. Now my phone is totally non working, it starts once in a while but only to the bootloader screen.
Any advice would be great.
Thank you guys.
Click to expand...
Click to collapse
Try following this instead..
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Let me know how you get on..?
Cheers,
I am downloading right now. Is it easy to switch the language?
thanks
Thank you for responces, but they did not work.
OK, I downloaded the dutch 1.42 rom version. I also downloaded the country code error program. I ran it and I got the same exact thing as I did with the 1.4 rom directly from imate. The problem is: when the rom program is about to update the radio it freezes and returns an error 114 something like radio update error. I don't know what to do, and of course my phone is not usable.
Please if you have any advice tell me.
thank you
Hey guys,
I finally fixed it. I read somewhere that if you delete the radio.nbf and the ms.nbf files and then try to update it will work. So I did, and now my phone is working again.
Thank you.
Hi everybody,
I have a big problem, I just tried to upgrade my Wizard (SPV M3000) with the last Radio Rom (2.25.11) and when I reboot my phone, there is no more Radio Rom, so impossible to connect the phone by ActiveSync...
Can someone help me, please ???
Thks.
OxYTooN said:
Hi everybody,
I have a big problem, I just tried to upgrade my Wizard (SPV M3000) with the last Radio Rom (2.25.11) and when I reboot my phone, there is no more Radio Rom, so impossible to connect the phone by ActiveSync...
Can someone help me, please ???
Thks.
Click to expand...
Click to collapse
Read this post (first message).
http://forum.xda-developers.com/viewtopic.php?p=302507#302507
This is exactly why you see so many messages warning you to read the forum and be sure you understand it before flashing.
Hi,
Of course, I have well read the forum before upgrading, it is not my first Rom upgrade, I used the ROMUpdateUtility_Wizard_NoID.exe just like you explained, everything was ok, it told me the romupgrade was succesfull, then I reboot the phone, and there is no radio any more !!!
Do you have a solution to this problem? is there any way to roll back, and re-install the radio rom?
OxYTooN said:
Hi,
Of course, I have well read the forum before upgrading, it is not my first Rom upgrade, I used the ROMUpdateUtility_Wizard_NoID.exe just like you explained, everything was ok, it told me the romupgrade was succesfull, then I reboot the phone, and there is no radio any more !!!
Do you have a solution to this problem? is there any way to roll back, and re-install the radio rom?
Click to expand...
Click to collapse
As the Thread on the 2.x Radio Roms says:
These are all for use with 2.x Roms only.
We've had a couple of reports that it doesn't work with 1.x Bootloaders (IPL/SPL Versions 1.x). The good news is that since it doesn't dork your BootLoader if you goof you can still reflash with your original Rom and recover your device.
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Is my fone a lemon? I did the upgrade to WM 5 Crossbow 3.0 upgrade for my friend 8125, downgrade it to 1.1 RUU ROm, cid unlock then upgrade to 2.XX and then did the 3.0 upgrade and everything when well. I don't know why my 8125 after the 3.0 rom upgrade the OS still show 2.X I have done 2 upgrade and both was success all except my phone. Any help will be great. You peeps rock
Mine is doing the same thing
hksmr2 said:
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Click to expand...
Click to collapse
Did the Wizard reboot each time you ran the lokiwiz .2b?????
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
canadian student said:
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
Click to expand...
Click to collapse
Did you use the method in my sig? Please do it again, slowly, each step. I've personally unlocked around 60 G3 8125 and MDA's this way... never not it not work.
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
canadian student said:
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
Click to expand...
Click to collapse
If you got all the T-Mobile crap when you installed that 2.26 I'd think you were OK. For fun download the latest Faria ROM at ftp://xda:[email protected]/Wizard/Roms/faria-roms/ ... I'm running the 8MB as we speak.
Good luck!
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
canadian student said:
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
Click to expand...
Click to collapse
you're kidding, right?
I have never worked with RAR files before, i'm a total noob I know. When I click on it asks me what program do i want to open this up with.
I got it I got it, thank you very much.
OK, so, here it is.
Download, extract, Donate!
your device *MUST MUST MUST* be synced with ACTIVESYNC and in WINDOWS MOBILE before starting the procedure.
All of you kind folks who pledged to the fund... please feel free to use my donate link </shameless_whore>
Cheers!
Olipro.
Hey Olipro
Nice to see this is up and running.
One Question....does it need to be in XP or can it be done in Vista as well?
try Vista and report back.
Vista worked for me
Vista worked for me
goes through alright (once drives are fixed up) however flashing any other rom still fails - even when manually going into the hard spl, and then running flash utility, it says the rom is corrupt.
Just the start?
ajajaj said:
Vista worked for me
goes through alright (once drives are fixed up) however flashing any other rom still fails - even when manually going into the hard spl, and then running flash utility, it says the rom is corrupt.
Click to expand...
Click to collapse
I guess that this means we need to now roll our own, or wait for someone to release a p3600i rom which uses this spl?
ajajaj said:
I guess that this means we need to now roll our own, or wait for someone to release a p3600i rom which uses this spl?
Click to expand...
Click to collapse
Did you try flashing a new radio ROM as well. Previously we could not flash anything other than the HTC Official ROMs including radios.
Radio Upgrade successfull
Andyc46 said:
Did you try flashing a new radio ROM as well. Previously we could not flash anything other than the HTC Official ROMs including radios.
Click to expand...
Click to collapse
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
ajajaj said:
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
Click to expand...
Click to collapse
I have an nbh from an existing rom, I want to change the 400 to 401 as referred to in other thread - can anyone offer context (where do i find the 400 specifically referred to?)
if I search, is it hex I am searching for, or ascii?
TIA
ajajaj said:
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
Click to expand...
Click to collapse
Well that is a good start.....which ROM did you try that came back as corrupt?
Andyc46 said:
Well that is a good start.....which ROM did you try that came back as corrupt?
Click to expand...
Click to collapse
I have tried the Trinity_WM6.1.Black_Edition.OS_Version_CE_5.2.19701_Build_19701.1.0.2_by_Akeo rom - this reports as corrupt.
Also, RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite - this one complains that the rom is for 128, not 256 MB.
等待中国高手的简体ROM
waiting 4 the writer 's CHS ROM
experiments in flashing
I modified the first instance i could find of 0x0400 the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite rom to 0x0401 and got a different error message saying:
Error [226] : FLASH WRITE
Flash write error happened. please check your PDA phone.
now the phone is now stuck in SPL
changed it back, and re-flashed, flash failed with "type error (128 vs 256)" however the phone now boots again.
tonychou said:
等待中国高手的简体ROM
waiting 4 the writer 's CHS ROM
Click to expand...
Click to collapse
No good to me...I am after WWE
ajajaj said:
I have tried the Trinity_WM6.1.Black_Edition.OS_Version_CE_5.2.19701_Build_19701.1.0.2_by_Akeo rom - this reports as corrupt.
Also, RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite - this one complains that the rom is for 128, not 256 MB.
Click to expand...
Click to collapse
That seems strange as the basic ROM for D810 (Standard Trinity) is the same for P3600i.....you would think both phones should accept cooked ROMs (now we have Hard SPL).
sigh. problem is that none of the roms I try will load...
By changing first 0x0400 in mary nbh to 0x0401, it flashes as far as 11% and fails with communication error, then when booting changes the inital start screen of the phone, (flashed to phone) but no further. saying the rom is corrupt.
SUCCESS
fully flashed the P3600i to WM6.1 - writing new thread to show how.
I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><
after reset the phone
nothing happened
What happened to me exactly the same as you!
money donated!
Thanks both olipro & ajajaj!
ok so i tried to do hard-spl. but i got a 260 error.. reset my phone, windows came back up.
this was from a xp sp2 machine :/
the crap thing is now i cant run any cab files on the wm device.. i've definately done something to do.
WARNING
This is a HTC test rom and was never given to the general public
Note the rom and radio version
This could be of intrest to cookers and rom hackers
http://rapidshare.com/files/1784304...9.405.2_Radio_52.46.25.26_1.08.25.23_Test.exe
I wonder if theres any difference in 3G bands.
This wouldn't be something i would want to just flash to right? I should wait for a rom cook? Is there a chance of bricking my phone trying it?
Anyone? Can i try out this rom on my phone without risking a brick?
The instalation brick at 13% for me, when i reboot, i have the tricolor screen of the bootloader so no problem to flash another rom but this one doesn't work for me
The SPL 1.14 olipro may be the problem?
Anybody have just the radio extracted from the ROM?
EDIT: I have modified the htcrt.exe tool and added blackstone to the configuration files. I will post the radio in a little bit.
AllTheWay
You are to cool
HDuser said:
AllTheWay
You are to cool
Click to expand...
Click to collapse
Well I tried to flash just the radio.
I got a update failed error.
Blackstone said:
00018003 BLACIMG.nbh - fail
Upgrade ROM code error Please try again
Click to expand...
Click to collapse
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Let us know.
Turb0wned said:
Let us know.
Click to expand...
Click to collapse
Everything is all good with the device..
Downloaded the WWE 1.19 ROM that cmonex posted. http://rs95.rapidshare.com/files/17....831.0_Radio_52.49a.25.26_1.09.25.14_Ship.exe
All is well.
No luck with this rom then?
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
AllTheWay said:
Well I tried to flash just the radio.
I got a update failed error.
I am downloading the stock ROM now to flash the radio cause I don't have stock blackstone radio by it self.
In the bootloader it reads RUUNBH
Upgrade ROM code error Please try again.
USB
Click to expand...
Click to collapse
stepw said:
Among other things, there's MFG SPL 1.07 bundled with this RUU. Avoid!
Click to expand...
Click to collapse
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
cmonex said:
probably you set radio value to 0x300 in htcrt. problem - it must be set to 0x301.
Click to expand...
Click to collapse
I tried to flash this radio once again. Radio fail 0x301 was set.
ICR
Hi there,
Is it possible to see if the ICR (in call recording) app is included in this rom like it was discussed in some other threads. They were talking about a test rom form HTC. And maybe could be extracted ?
Thanks
cmonex said:
are you also getting the problem of screen not turning on after a resume with MFG SPL installed?
Click to expand...
Click to collapse
Kernel is not loading, stuck in OEMInit if OS is booted from MFG SPL 1.07 loaded via USPL. Didn't try flashing it though...
Has anyone got this radio to work yet?
Not that I know of. Would like to be able to flash this radio.
AllTheWay said:
Not that I know of. Would like to be able to flash this radio.
Click to expand...
Click to collapse
People in Raphael forum have mentioned they tried it and high battery usage is the only "benefit"...
You dont meant that they tried it on the HD right?