Database Develop

.NET Framework 3.5 not installing on Tilt!

I've been trying to install the .NET framework for my Tilt, and it keeps spitting out "installation unsuccessful". It installs fine on my computer, then it goes to install it to my phone via ActiveSync (Windows Mobile Device Center actually because I use Vista). The installation screen on my Tilt pops up saying it's installing, but the bar doesn't move at all, and after a few seconds it just says it's unsuccessful without giving a reason!
I'm using the stock ATT Tilt rom, 6.1 version. I haven't done anything special to it, so I have no idea why it wouldn't work...
Can anyone spare some sage wisdom as to why this won't install? I'm trying to use wmVista and it needs 3.5 to work .
Note: I downloaded the .NET 3.5 right from Microsoft: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en

Have you tried copying the NET CF3.5.cab directly to your Kaiser & then installing. The cab can be found in the installation folder on your PC or on this site if you do a search.
I've always installed from the cab file never from the PC installation so might be worth you trying it !

You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.

pjcforpres said:
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
Click to expand...
Click to collapse
Ah, I saw that thread before posting but I assumed by his first post that his problem was different than mine. I just check it out again and saw the direct downloads for the cab file, so I'm gonna try that out. Thank you for your help!
(I'm a new poster, but I've been lurking around these boards for a while now looking for stuff for my Tilt)
Hopefully this works...

i installed .NET CF 3.5 on my device then after installing my camera is just plain black and doesnt show any picture.

problem solved!
- i installed Resco Registry Explorer and .NET compact framework 3.5 on my Kaiser
- opened resco registry and searched for the .NET CF
- disabled .NET CF 2.0 by changing value from 1 to 0
- then enable .NET CF 3.5 by changing value from 0 to 1

I had the same problem, used your link, it worked perfectly. THANKS!!!!

.net Compact framework problems

Well. i need new version of .net compact framework.
so i tryed to install NETCFv35.wm.armv4i.CAB
But that gives me an error, and cannot install..
tryed a lot of different thingies, but cant get out..
who can help me with this??
Got tytn2 (original MDA vario 3) with newest original HTC rom availible

what error are you getting?

program i wanna run says it needs newer version of .net CF
installation .cab says cannot install shut down programs free up space error info : 2
(i have enough space free and shut down all programs... )

.net compact framework
That means .net is already in the rom

i also had the .cf configurator installed.. sayz nothing about the new 3.5 version installed
and programs i wanna run, say they need newer version..
How 2 fix?

.net compact framework
Here install this and you will see what im talking about after install look in your programs folder.

it says.
Versions installed: 2.0.7045.0 (ROM)
PPC 5.2.19212
How do i update this 2 .net CF 3.5??

Fixxed
install http://www.dinarsoft.com/memmaid/download.html
goto running processes, and terminate all the processes wich arent system..

NETCf 3.5
i also cannot install the NETCF 3.5..my file is NETCFSetup35.msi (downloaded from microsoft site, 33.3MB)
it said that Installation of Microsoft .NETCF 3.5 was unseccessfull..
i dont know whats wrong with it..
my net compact version:
2.0.7045.0 (ROM)
pocket pc
5.2.19212
(just the same as above)
so how to upgrade become 3.5..or which files should i download?
thanx for the advice

do as explained.
Download NETCFv35.wm.armv4i.CAB
install http://www.dinarsoft.com/memmaid/download.html
goto running processes, and terminate all the processes wich arent system..
--> install NETCFv35.wm.armv4i.CAB
reboot, run NETCFCFG.cab and set the 3.5 version as the one wich needs to be used.

I've already installed memMaid..
but the problem is..i dont have the NETCFv35.wm.armv4i.CAB file
i just have the one downloaded from microsoft (.msi, size 33,3 MB) is it the right file?..because when i tried to install,it said unsuccessful..no other warning to kill other process, etc..
do u have link to the file -> NETCFv35.wm.armv4i.CAB
thank u so much if u provide the link

problem solved

.NET compact framework

I recently updated my X1's firmware with the Sony Ericson Update Service. Since then I've been reinstalling everything. Only problem is, that for some reason I can no longer install Microsoft's .NET compact framework, which is required for some programs to run. Is anybody else having this problem, or know what to do about it?

Here:
.NETCF v37.cab
http://www.4shared.com/file/130819293/aa65697a/NETCFv37.html

anhphe076 said:
Here:
NETCFv37.cab
Click to expand...
Click to collapse
Uh? There's a .NET Compact Framework v3.7??

anhphe076 said:
Here:
NETCFv37.cab
Click to expand...
Click to collapse
The file is not there!

anhphe076 said:
Here:
NETCFv37.cab
Click to expand...
Click to collapse
Quang cao VNPT ra the gioi ha ban? Bua nao minh ve Can Tho cafe nhe?

I had the exactly the same problem after installing the RA3 rom update.
It always said that the .net framework cf installation unsuccessful when I tried to install using the .exe file downloaded from microsoft.
Alternatively, you can install the CAB file from your computer.
If you use windows, look in the folder:
program files>microsoft.net>SDK>compactframework>v3.5>windowsCE for the CAB file. I used this one, NETCFv35.wm.armv4i.cab, and it works. Now I can use a software that needs .net 3.5.
ps: if I'm not mistaken the .net CF 3.7 is a leaked version. Therefore, I prefer installing 3.5 to 3.7.

liemivan86 said:
I had the exactly the same problem after installing the RA3 rom update.
It always said that the .net framework cf installation unsuccessful when I tried to install using the .exe file downloaded from microsoft.
Alternatively, you can install the CAB file from your computer.
If you use windows, look in the folder:
program files>microsoft.net>SDK>compactframework>v3.5>windowsCE for the CAB file. I used this one, NETCFv35.wm.armv4i.cab, and it works. Now I can use a software that needs .net 3.5.
ps: if I'm not mistaken the .net CF 3.7 is a leaked version. Therefore, I prefer installing 3.5 to 3.7.
Click to expand...
Click to collapse
Thank you, that seems to be working.

.Net CF 4.0 is actually available with the MS Visual Studio 10.0 beta, but beware: the damned program erased all my contacts and calendar when I autosynced (and I had no backup because I hadn't autosynced in months AAARRRG!)

I have some problem to use v3.5, hence now try to get v3.7.
Thanks...

.NET Framework 3.5 wouldn't longer work?! HELP Please!

Hey,
following problem:
I installed .NET Framework 3.5 as I got my Diamond 2. But since saturday, or something else, all apps and games which need .NET Framework 3.5 won't start and "say" that I must install .NET Framework 3.5. So I tried to reinstall this, but than my Diamond 2 says, that I've already installed .NET Framework 3.5. I've also try to cahnge the value from .NET Framework 2 & 3.5 in the registry. But it wouldn't run! Please Help
Thanks!
PS: Sorry for my bad english!

Hard reset may be your only option.

I already thought so..
That's very bad! But thank you!
Do you know good back up programms?

tillifc4ever said:
I already thought so..
That's very bad! But thank you!
Do you know good back up programms?
Click to expand...
Click to collapse
SPB backup is good for system file restoral.
PIM backup is good for PIM data, however I find that restoring PIM data can f-up Manila.
You may want to back up your PIM data with M$ My Phone.

With any registry editor, I use Resco Registry, go to HKLM/Software/Microsoft/.NETCompactFramework
There you will have 2 keys, that says the version, set to "1" the 3.5 version and set to "0" the 2.0 version; then soft reset and voila...

Significantly increases the performance of your X2

Are you having problem with your CAB files or you need more speed and stability, then use Extendir to prepare your cab files.
Extendir is a file system filter driver that significantly increases the performance of your phone, in specific situations even up to 12 times as fast and faster…
With the help of Extendir 98% of my old and new files now work perfectly on my X2 without any heavy battery usage.
the link here :
http://forum.xda-developers.com/showthread.php?t=530710
**************************************************
After trying all the posts to make our X2 fast and stable, this one work perfect for me :
http://forum.xda-developers.com/showthread.php?t=680194
See my screen shots for Ram and memory information on my X2
**************************************************
For those that will like to install Spb theme, please check it out here:
http://forum.xda-developers.com/showthread.php?t=833941
*************************************************
*** If you have any question about these softwares, Please post in their various thread for fast reply and help ***

*wonders how he installed this*

which file did you download and install?

Where do you need help?
indycar said:
*wonders how he installed this*
Click to expand...
Click to collapse
GottaStayFly said:
which file did you download and install?
Click to expand...
Click to collapse
Which application? Please let me know what you really need to know. I have three difference threads in the post.

extendir what else we talkin bout here

indycar said:
extendir what else we talkin bout here
Click to expand...
Click to collapse
The post is for three different threads as stated before, I used all the three threads together to product the result you see in my first post.
Answer to your question, check my attached file.
The software is really simple to use, download the file, unzip it and run Extendir Cabs.

and whats with extendir.dll which is actually doin the changes not the
extendir cabs which only makes cab files

indycar said:
and whats with extendir.dll which is actually doin the changes not the
extendir cabs which only makes cab files
Click to expand...
Click to collapse
Yes that is what I'm asking you to do just re-cab your Cab files with Extendir Cabs, Install your files as usual and just relax and see how your phone will perform. But if you want to go all the way, you can read the post about Extendir all cache and Preset Installer
And you still have questions just post in the thread and ShaDrac can personally help you.http://forum.xda-developers.com/showthread.php?t=530710
But from your questions, is like you are doubting the software???

kaybest said:
But from your questions, is like you are doubting the software???
Click to expand...
Click to collapse
not doubting i just did hard reset two weeks ago and my x2 aint that bad atm i just dont want to screw it so id have to reinstall all the trash i need

Okay, so if i use Extendir on my Manila cabs, it should make sense work faster on the x2?

OK ... I used the Extender ... and here is what I did (and is it simple):
1. moved all of the cabs that I wanted to "extend" into a directory -- on my PC
2. ran "extendir cabs" and pointed it to the directory mentioned in #1
3. It generated a single cab with all of the cabs that I had moved into a single cab called the "directory name.cab" that was in #1
4. I copied the cab to my phone and installed it ...
That was it ... and it seems to work ... but I don't have any results that I can report ... only did it to day, and it is too early to say what it is doing -- but it seems to have better battery response ... note that one of the cabs that I "extended" was SPB 8 Mobile Shell. After the install, all of the programs worked and the install did not take very long ... shorter then installing the programs the first time ...
Now the questions ...
1. When the extender cab installs, it asks where to install the extender cab ... and I selected the storage card -- which I found strange since SPB 8 is normally installed in the device and not on the card ... It seems to work -- but should that have been installed on the device?
2. there only seems to be a single choice for the location of the install -- when I did it the first time, I installed in on the device, and it took up memory in the device when I hade "extended" cabs that were both formally in the device and on the storage card. I then addnd more programs into the directory for the cabs, and rans extendir cabs again and it created another file (called the directory name -- note that this cab is located in the same directory that the extendir cabs.exe file is located). When I copied it to my phone and installed it, it said that I had to uninstall the previous version of the extended cab -- which I did. (Note that I also tried to rename the cab to another name before installing it, and it still asked about uninstalling the previous version.) I am not sure if it is possible to use it for device located cabs and storage located cabs -- is that possible?
Well that is my experience with extender and how it is used ...

GottaStayFly said:
Okay, so if i use Extendir on my Manila cabs, it should make sense work faster on the x2?
Click to expand...
Click to collapse
Yes It will help, please let us know your outcome. Maybe some people that don't use Manila because of battery and Memory issues, can try Manila too.
RJH57108 said:
OK ... I used the Extender ... and here is what I did (and is it simple)
Click to expand...
Click to collapse
A thousand thanks for trying this tool, this tool is basically for Rom developer to use and cook applications into their Rom, back then people discovered using it to re-cabs our Cab files make them faster and less battery consuming.
Answer to your Questions : You just have to group your Cab files into two groups. First group for cabs that will be install into Phone memory, Second group for cabs in memory card.
Or you can re-cab your files separately.
Tips for better battery and more speed : You may know this, but for those that don't know.
* Install applications that runs regularly, runs in background or programs you use frequently into phone memory.
eg : Manila
* Install applications that don't runs in background, you don't use regularly or very large applications in Memory card.
eg : games

Hmm.. im not sure if im doing it wrong but what i did was use the program on the manila cabs and the other stuff, but when i restarted my x2 manila didn't bother to start up unless i install the non-extendir cab im not sure what im doing.

Here is what I noticed over the last few days ...
There is a significant speed increase in browsing (I use Iris -- gave up on the IE since I was getting warnings about using IE6 based browser and Microsoft does not appear -- at least i could not find one -- to have an upgrade) speed and also Bing is faster ...
SPB 8 is also faster ...
There might be an increase in battery life, but I am still evaluating that part of it ...

I will have to give this a try. Thanks for the heads up

will the droid pro+3.0 really work in xperia x2? haha..=)
i m newbie...