hi. sorry for my english.today my diamond doesnt ring.it vibrates but it doesnt react to an incoming call with sound.I look sounds and notifications.there isnt a problem.how can i fix it ?thanks
Soft reset the phone, the button is underneath the stylus compartment.
I did it but doesnt ring too.i solved the problem.in the system status there is system volume and near it ring volume.my ring volume was minumum ı dont know there was a ring volume .thanks for ur reply
Thanks for this! You wouldn't beleive how puzzled this had me today! I was about to give up on the phone since I was missing calls al day!
I had the same issue, on the volume screen there is a grey arrow at the top once you turn up the system volume, click the grey arrow and tun up the ring volume...
Related
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
kekelen said:
hi , when i call someone i got a very silent dial tone .
any one know how to raise the volume of the dial tone?
i have on original htc tytn 2 with original rom.
(soft reset is not helping)
thanx
Click to expand...
Click to collapse
Mobile phones don't have dial tones, unless you have a Jitterbug phone. You are hearing some other tone, or maybe the sound you are hearing is a byproduct of some part of the phone. For example, on the older model Motorola V3's the EL keypad backlight would emit a low volume tone when lit. Does your "dial tone" stop when the backlight dims or shuts off when in a call? If so then you are hearing the backlight. Most people can't hear it because it is above the range of normal human hearing.
If it is the backlight you are hearing you cannot increase the sound. It is what it is.
-Jay
props for knowledge of the jitterbug.
ChumleyEX said:
props for knowledge of the jitterbug.
Click to expand...
Click to collapse
Yeah, we really ragged on Jitterbug for that (and other things) in another forum I'm in when they first came out.
-Jay
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
kekelen said:
i think i expressed my self wrong.
when i want to call someone and i press his number and then press the call button u should here a sound that the phone is ringing (on the other side).
and that ringing sound is very silent.
is there a way to increase the volume on the ringing sound.
Click to expand...
Click to collapse
If turning the volume wheel does not do it then there is no way I know of.
-Jay
not just 'a bit silent' then?
no it is realy silent .jou can hear it but if you hold your phone 20-30cm from you ,you cant hear it .
also when putting it on speaker you cant hear it.(because then you are more than 30 cm from your phone.)
when the pickup the sound is fine and loud.
I have the same probleme with my blackstone and its very annoying. if there is some noise you cant heard dial tone when you call someone.
or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying
A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill
when in the dialer go Menu->Options then Keypad: Off
ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed
jut realized it still makes the annoying noise when it connects to a call
i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416
HI can somebody tell me that xda2i have a speaker phone in side or not coz some times when i receive a call, theres a symbol show on the top right corner of the screen like the speaker phone is on , but normaly when u want to choose this option its not there.
i think there is some special position on the screen and if it got pressed the speaker phone is on.
thanks
press and hold the green pickup button (phone symbol) when in call.. should switch it on.
Hi all,
My phone doesn't ring when there are incoming calls, it only flashes the light. When I switch to vibrate mode, it does vibrate. How can I fix such problem. Please advice.
Thx in advance for any input.
There are 2 volume settings: System volume, and Ringer volume. Make sure both of them are turned up. I assume you can hear other sounds?
GeckoDev said:
There are 2 volume settings: System volume, and Ringer volume. Make sure both of them are turned up. I assume you can hear other sounds?
Click to expand...
Click to collapse
i have same problem and its not the ringer volume setting. someone please help. im missing so many calls cuz of this. thanks
As already noted, sounds like you have System Vol up and have also gone into 'Settings/ Sound', and made sure phone volume slider is turned up.
I had the same problem for awhile, the two are linked, unless you manually turn the sound down (in Settings), then it will respond to the System level buttons only to the manually set sound level. I had inadvertantly turned my phone volume all the way down, thinking the System setting would adjust it to wherever I wanted it, not so and I missed some calls.
You probably have also checked to make sure the Phone ringer selection is not set to 'none'.
i had this same problem and i had turned everything up and still nothin..i did a hard restart and after that it worked
Exact same problem, didn't realise until reading this thread that there is an arrow at the top of the volume control which takes you to the ringer volume. Problem solved - cheers.
kienle+spiess said:
Exact same problem, didn't realise until reading this thread that there is an arrow at the top of the volume control which takes you to the ringer volume. Problem solved - cheers.
Click to expand...
Click to collapse
oh man! i was messing with this problem for almost a week! day after day lurking to the every little setting until i thought of googling the thing..
so this was it, the arrow at the top. damn!
TF3D settings tab > Sound > Notifications sound on
ang3l said:
oh man! i was messing with this problem for almost a week! day after day lurking to the every little setting until i thought of googling the thing..
so this was it, the arrow at the top. damn!
Click to expand...
Click to collapse
hhhhhhhhh
i'm too
I laughed a lot & I laughed a lot
Hi all,
My phone doesn't ring when there are incoming calls, it only flashes the light. When I switch to vibrate mode, it does vibrate. How can I fix such problem. Please advice.
Have the same problem, but I don't see any <, button or another sound/volume menu, pls anyone?
Htc touch pro not ringing
I haven't had a ringer in six months. Only vibrate. I have tried everything. I don't understand 'the arrow at the top of the volume' control. Is that the slide button on the side of the phone that has system/ring options?
hi.. i also had same problem..what i do was... copy ringtone to music in phone memory..and one thing only the cut edited mp3 can play.. i think.. mine now ok..
Hello guys, I'm experiencing a minor issue with my ROM. Sometimes when I reboot, if i tap the volume key on the side after rebooting, the keypad lights will turn on indicating i did tap it, however, the system volume and Ring volume display would not appear on the screen. And after that the phone goes super slow. I tried to hard-reset it once but it's occurring again.
I do know there is a way to adjust Ring volume without that screen, but was wondering is there another way to adjust the System volume without tapping the side buttons?
Thanks
Sounds strange. Which ROM are you using?
You can adjust the volume by tapping on the volume icon in the taskbar.
using dutty V3.6
thanks let me try that now..
thanks i got it.. seems like tapping that works for now, if i got further problem i'll post again
thanks again the_scotsman