Active Sync Problems with Exchange Server on Touch Diamond - Touch Diamond, MDA Compact IV General

Hi All-
I am looking for advise as I have problems synchronizing my emails with Active Sync. I am using a HTC Diamond with Windows Mobile Version 6.1. My current ROM on the device is 1.37.407.2 GER and the ROM Date is 06/15/08. I am using this with a Exchange Server. I am experiencing a problem while sending emails from my device. When I hit the “Send” button then the email will be sent two or more times and it keeps staying at the “Outbox Folder”. When Looking at Active Sync – it freeze and I will get a white screen. I was able to synchronize the calendar and contacts without any problems.
I am wondering if someone knows this problem and could provide me advice on how I could get this resolved.
MANY THANKS!
Thomas

We've seen this happening, apparently MS have a hotfix in the works for exchange 2007

The same problem here !!! I had to unistall my exchange configuration !!

I do have Exchange 2007 and is no problem here like you did mentioned above, but I do have another problem, from time to time is asking me for restart and tell me "Recent changes was made to your configuration...". I did not find anything on web about this ... My guess is that is enforcing the policy to the phone but why is asking for restart so many times ?

Only e2k7 configurations which use ISA to publish EAS externally will have the problem - so you can either wait for the patch, or get the infrastructure changed to remove ISA.
As for your policy keep being reapplied - are you using a stock rom and/or the util that changes the reg keys to disable the policy settings?

I'm using SBS Exchange and everything is working fine

Furbious said:
Only e2k7 configurations which use ISA to publish EAS externally will have the problem - so you can either wait for the patch, or get the infrastructure changed to remove ISA.
As for your policy keep being reapplied - are you using a stock rom and/or the util that changes the reg keys to disable the policy settings?
Click to expand...
Click to collapse
I have Eite 2.0 ROM, and no ulility.
I did change the policy on server to more that 1 hour for reaplying policy, but this has only extend my time until he will ask for reboot, other coleagues do not have this problem and they have HTC TYTNII

Related

Exchange SP2: PUSH email Problems with Exchange

I know this is a little off topic, but was wondering if anyone has experience running Exchange SP2 with PUSH EMAIL. My hosted Exchange ISP is telling me that they do not support PUSH email (new ActiveSync) because there are major problems with the stability of the release... isnt this BS, I thought once you have SP2 you should automatically have PUSH email.
IDEAS?
they have to enable push e-mail support in Exchange, it's not automatically enabled by default. once that's enabled, push e-mail should work like a charm. as for stability of sp2, that's highly unlikely as i know countless places that are running sp2 and push e-mail JUST fine.
that's not entirely accurate. Direct Push is enabled by default, but they can disable it. It is likely that they have, if they feel that it doesn't work right.
ChrisSpera said:
that's not entirely accurate. Direct Push is enabled by default, but they can disable it. It is likely that they have, if they feel that it doesn't work right.
Click to expand...
Click to collapse
I'm not sure that it is, it's a while since we updated our servers to sp2 but i'm pretty shure you have to put the tick in the box for enable direct push email in the mobile services prefrences before push will work.
Then again it is a while since we updated and I may be mistaken..
Has ne1 here been able to get Push to work? I installed the Exchange service Pack and enabled HTTP push. My WM5 wizard does a manual sync fine via GPRS, but when I check off up to date receipt, it keeps asking me for the phone's SMS number...
Has ne1 encoutered this prob? I wonder if it makes a dif if my Phone OS is French while Exchange server is in English
Thanks
footang said:
Has ne1 here been able to get Push to work? I installed the Exchange service Pack and enabled HTTP push. My WM5 wizard does a manual sync fine via GPRS, but when I check off up to date receipt, it keeps asking me for the phone's SMS number...
Has ne1 encoutered this prob? I wonder if it makes a dif if my Phone OS is French while Exchange server is in English
Thanks
Click to expand...
Click to collapse
Ours is working fine, It sounds like your setup stil to use the autd way ie. via a sms message or an email 2 sms gateway, have you put the phone in the cradle and synced since installing sp2 and enabling direct push, also we enabled the enforce divice security feature and set a password on the phone.
BTW is you deviced using an updated rom with the push facility (aku2) ? as soon as we updated our devices the divice address feature in activesync was removed.
BTW is you deviced using an updated rom with the push facility (aku2) ? as soon as we updated our devices the divice address feature in activesync was removed.
Click to expand...
Click to collapse
Good question. Im not sure. My Phone is WM5 with ROM ver 1.3.1.11 FRA and operator version 12.3.5.107. How can I know if it has this AKU2? I though all versions of WM5 were PUSH enabled...
Also, did you have to install a certificate on your phone and server? Ours doesnt have one...
thanks
No only the newest roms for the wizard have the AKU2 update in them they have been officially released in the last few days on Imates ftp, and yes you need a security cert on the server and the phone for it to work if s your own certificat the device will have to be application unlocked to install the cert.
OK, thanks for the info. I guess I need to updgrade my ROM
I saw there are quite a few posts regarding the upgrade for the wizard. Could you recommned me which version you installed exaclty and where you got it? its good to use something tried, tested and true....
(Im on an HTC Wizard, dubbed M300 from Orange)
Thanks
We are using a Beta Test Rom on the tornado (qtek 8310) but there is an official released rom for your device from Imate I think.
Have a quick search for wizard rom
I found this it may be what you need
http://forum.xda-developers.com/viewtopic.php?t=44022&highlight=wizard+rom
Many Thanks, I'll try it out
@footang:
Your device has AKU2/MSFP if the connection manager has a Microsoft Direct push button.
You need to set up the activesync exchange connection on your wizard with that button engaged to get direct push with no SMS required. I posted specifics in the Wizard forum.

DirectPush & Notification OK

Dear All,
I have tested TWO Universal and an Wizard with this configuration:
Universal with M5000 Orange UK ROM (Orange CH)
Wizard with T-Mobile Rom 2.17..7.2 WWE (Swisscom CH)
The DirectPush work perfect with my Exchange Server 2003 SP2. The New E-mail notification took 2-3 sec to arrive to the device since the exchange server received the e-mail.
When the device is switched on I see the notification message on the screen and I hear the sound.
When the devide is in standby i hear the sound and the vibrating device with blinking led, but the screen remains off.
Traffic: I have tested only 2 hours but I have seen that the device use 5-7 kb / hours with 0 e-mail.
Thank you very much to all xda staff!!
OK - I will bite on this one. How is your setup different from that of (I believe) every other Wizard owner who does not receive vibrating notificatios of an incoming email when the device is in standby (i.e., both backlight and screen are off)? I would really like to know as this is a major problem for me, and several others, as discussed on a number of threads.
Settings
Hi matchtrader,
First to know is that my first device is a Qtek9100.
Yesterday I downloaded the
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
and upgrade my Qtek.
With this release I had some problem with push (e-mail take 10 minutes or more).
After that I made some check on my exchange, just disabled the security. I made sure my account has Uptodate rights (user management)
After that I downloaded this ROM:
CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe
After the update I just set the notification "new e-mail message" to vibrate and blink.
If I can help someone I can set up some Exchange accounts to test
I work with an Exchange 2003 SP2 on Windows Server Enterprise 2003 R2 with Microsoft ISA 2006 Server Enterprise in loadbalancing (2 servers)
Re: Settings
Moresi said:
Hi matchtrader,
First to know is that my first device is a Qtek9100.
Yesterday I downloaded the
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
and upgrade my Qtek.
With this release I had some problem with push (e-mail take 10 minutes or more).
After that I made some check on my exchange, just disabled the security. I made sure my account has Uptodate rights (user management)
After that I downloaded this ROM:
CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe
After the update I just set the notification "new e-mail message" to vibrate and blink.
If I can help someone I can set up some Exchange accounts to test
I work with an Exchange 2003 SP2 on Windows Server Enterprise 2003 R2 with Microsoft ISA 2006 Server Enterprise in loadbalancing (2 servers)
Click to expand...
Click to collapse
Just to be clear on this, if you put your device in standby (screen off), and send yourself an email, the device will vibrate when the email is pushed to your device?
You seem to be the only one of hundreds that this actually works for.
quick question:
When you go into activesync and tap menu followed by schedule, do you see an additional link to set for "as items arrive" or do you only see an Adjust peak times to fit your schedule link. These links are at the bottom of the screen btw..
mine will make a sound and vibrate in Standby mode ONLY if I have the Outlook client hidden or closed in other words it works if you have the mail client on the background or closed at all
fx4rover said:
mine will make a sound and vibrate in Standby mode ONLY if I have the Outlook client hidden or closed in other words it works if you have the mail client on the background or closed at all
Click to expand...
Click to collapse
fx4rover -- I am assuming you have the AKU2 ROM upgrade applied? What you are saying doesn't work for me and to my knowledge hasn't seemed to work for anyone else using what I understand to be the latest Qtek or K-Jam ROMS. Thanks.
On ActiveSync I see only one link at the bottom: "adjust peak times".
The first time I set up an account I see two links, but I've noticed that this happan if Exchange 2003 isn't configured for Push.
The first time The DirectPush button is pressed, the Device check if the server accept push and remove the other link where you can set the SMS address of the device...
When my phone is in Standby Mode and I receive an e-mail, I hear the sound, the phone vibrate e I see the light flashing... but the screen remains off and the phone remains in standby mode till i press the power button...
This works with my device and other 2 M5000 configured on our server...
Moresi said:
On ActiveSync I see only one link at the bottom: "adjust peak times".
The first time I set up an account I see two links, but I've noticed that this happan if Exchange 2003 isn't configured for Push.
The first time The DirectPush button is pressed, the Device check if the server accept push and remove the other link where you can set the SMS address of the device...
When my phone is in Standby Mode and I receive an e-mail, I hear the sound, the phone vibrate e I see the light flashing... but the screen remains off and the phone remains in standby mode till i press the power button...
This works with my device and other 2 M5000 configured on our server...
Click to expand...
Click to collapse
This is strange. Does anyone else running the T-Mobile ROM see this behaviour? Cerainly neither the K-jam ROM nor the Q-Tek ROM works this way as documented in numerous threads.
matchtrader said:
fx4rover said:
mine will make a sound and vibrate in Standby mode ONLY if I have the Outlook client hidden or closed in other words it works if you have the mail client on the background or closed at all
Click to expand...
Click to collapse
fx4rover -- I am assuming you have the AKU2 ROM upgrade applied? What you are saying doesn't work for me and to my knowledge hasn't seemed to work for anyone else using what I understand to be the latest Qtek or K-Jam ROMS. Thanks.
Click to expand...
Click to collapse
Yes I do have the update with the DirectPush, and since I applied the upgrade it has been working fine, I just need to have the mail client on the background, if I have it in front the notification will not work
this is the file that I used fot my phone, a Cingular 8125 :CUSTOM_RUU_WIZARD_217_AKU2_CINGULAR_WWE.exe
@summiter:
Is the rom that fox4rover installed your Qtek based AKU2 customization for the Cingular 8125?
@fox4rover:
I have been unable to reproduce your success on my Qtek equipped 8125. I can get the light to flash, but vibrate doesn't work when I'm in standby mode. I specifically started outlook and made sure it was running in the background.
I have verified that if outlook is the foreground app then notifications seem to be completely disabled. That appeared to be the case on my original ROM when running AUTD1.0 as well.
@moressi:
Ok, I'm convinced you have AUTDv2.0 based direct push up and running on your device. Could the T-Mobile AKU2 ROM actually contain the vibrate fix?
well i'm using the exact same ROM (the Qtek 2.17 customized for Cingular ROM) and on standby (even with outlook in the background) i don't get the vibrate at all. i DO however get the LED flashing, but that's it. MS has said that they did not add this feature to save battery life.
Can someone please send me the instructions on how to set up push mail. I upgraded my 8125 to this ROM yesterday...
Qtek ROM RUU with CING Splash:
ftp://xda:[email protected]/Up...s/CUSTOM_RUU_WIZARD_217_AKU2_CINGULAR_WWE.exe
after doing so I see new options in the COMM manager and I see an icon that appears to be a push email icon but when I try to select it it just stays greyed out, won;t do anything. Could someone please help me get this set up.
Thanks,
Geno
hpgeno said:
Can someone please send me the instructions on how to set up push mail. I upgraded my 8125 to this ROM yesterday...
Qtek ROM RUU with CING Splash:
ftp://xda:[email protected]/Up...s/CUSTOM_RUU_WIZARD_217_AKU2_CINGULAR_WWE.exe
after doing so I see new options in the COMM manager and I see an icon that appears to be a push email icon but when I try to select it it just stays greyed out, won;t do anything. Could someone please help me get this set up.
Thanks,
Geno
Click to expand...
Click to collapse
Have you tried setting it up through Active Sync by entering your exchange server settings when creating a new partnership?
I sure didn't. Do I need to create a new partnership to do this?
there's PLENTY of threads on how to properly enable push e-mail. but the gist is:
connect to an exchange server that has SP2 AND push e-mail enabled. enter the server settings in active sync on your phone (or desktop), then sync. push e-mail should automatically be enabled when you sync, and just make sure the push e-mail icon in teh comm manager is enabled. that's it.
hpgeno said:
I sure didn't. Do I need to create a new partnership to do this?
Click to expand...
Click to collapse
I'm sure their are other ways to do it, but I do it by creating a partenership via active sync on my laptop. You also need to make sure that push email is enabled on your and exchange server and it is running SP2.
Sleuth255 said:
@summiter:
Is the rom that fox4rover installed your Qtek based AKU2 customization for the Cingular 8125?
@fox4rover:
I have been unable to reproduce your success on my Qtek equipped 8125. I can get the light to flash, but vibrate doesn't work when I'm in standby mode. I specifically started outlook and made sure it was running in the background.
I have verified that if outlook is the foreground app then notifications seem to be completely disabled. That appeared to be the case on my original ROM when running AUTD1.0 as well.
@moressi:
Ok, I'm convinced you have AUTDv2.0 based direct push up and running on your device. Could the T-Mobile AKU2 ROM actually contain the vibrate fix?
Click to expand...
Click to collapse
Yep that's the ROM I built.
As for the T-MO AKU2 ROM, it is based on the QTek (as is mine), so its exactly the same save for the customizations in extended ROM.
One important note is that if you enter the SMS address for push, you will get an SMS charge for every e-mail retrieved. I noticed that this morning with my T-Mo service.
Unless there is a way to get around it... What is your guys' experience with this? Is there a way to not have to enter the device's address?
HazChem said:
One important note is that if you enter the SMS address for push, you will get an SMS charge for every e-mail retrieved. I noticed that this morning with my T-Mo service.
Unless there is a way to get around it... What is your guys' experience with this? Is there a way to not have to enter the device's address?
Click to expand...
Click to collapse
If you have to enter an SMS address for push, you don't have the latest ROM.

WM6 and Exchange email issue

I'm using the Orwell WM6 rom and having problem syncing email with Exchange via GPRS. I can sync calendar and contacts with no problem and desktop sync is ok for email. But everytime I sync 'over the air' my email inbox ends up empty.
It all works perfectly with WM5.
I've read a few posts about problems with Exchange sync but haven't seen any solutions. Does anyone know how to fix this? This might be the only thing that sends me back to WM5 and I really don't want to do that unless I have to.
Thanks.
I tried to reproduce this error but have not been able to... I am using the PDAVIET3 WM6 ROM though, I use push-email and havent had a single issue with this ROM. Maybe you might want to try that wm6 version ( or pdaviet4 )
cheers
hmm I wonder if its because my Exchange is 2003 SP1. I sync on a schedule rather than push. Maybe SP2 is needed to sync with Exchange mail. Its a work server so I have no say in getting it upgraded.
I'll try one of the pdaviet roms. Thanks for the suggestion.
See if your IT guy can run through the settings. The only thing I could think of is he might not have the "Enable unsupported devices" checked. The screen below is of an Exchange server with SP2 installed. I assume that option is also in SP1.
Exchange 2003 SP2 is required to have Pushmail available, the scheduled synch should already work with SP1
I'd have your IT guy check the event logs on the Exchange box ...
I know it's not your decision but I'd really enjoy hearing the rational of your IT dept not installing SP2...
I remember when SP4 for NT blew up several of my servers (gotta love that BSOD!) but this update has been out for over a year and is considered critical.. and quite stable. Actually more stable than SP1...
Steven
MCSE / CCNA
Thanks for those suggestions guys. But it looks like I've got it fixed.
Before flashing one of the pdaviet roms I thought I'd hard reset the Orwell rom and see if that made a differance. And email is now syncing sweetly!
To make it even stranger, before the hard reset I found I could sync my sent items in email if I enabled that, just not the main inbox. Really strange.
I'm now reluctant to add any of the fixes in the Orwell rom for camera, mms etc. just in case they give me the old problem. But who cares. Exchange email sync is number 1 on my list.
Cheers.

Hide activesync popup on my device

I have searched all weekend for a solution to this with no luck.
I upgraded my TILT to the new official ROM.
I am using exchange server for my email.
When I am using the device or sometimes when I start to use it, a window is opened full screen with the title "Activesync." The form has a big empty rectangle in it.
I know the device is "syncing" however , i don't want it moving to the top of everything I am working on.
Is there a way to hide this function?
Thanks
If im not mistaking, there is a setting in kaiserTweak that allows you to do this
I have been through KaiserTweak and haven't found it.
Do you know which setting?
KD8DNS said:
If im not mistaking, there is a setting in kaiserTweak that allows you to do this
Click to expand...
Click to collapse
yes, i would like to know as well...i have never seen this before
Well I discovered the cause of the window popup... This empty activesync dialog is actually an error received from the exchange server, specifically exchange server 2007.
There is a known BUG that Microsoft has been working for the last few months that occurs between WM6.1 and Exchange server 2007. If you mail from your phone on your exchange account, it will send the mail, however the mail remains in your PPC outbox that results in sending the mail again upon the next server sync. The mail never leaves your outbox - resulting in the error dialog, and the mail sending over and over - 26 times for me last night to a group of 20+ people.
I may have to downgrade my Tilt to WM6.0, unless I can find a magical way of deleting the email from the PPC outbox after it is sent....
thex said:
Well I discovered the cause of the window popup... This empty activesync dialog is actually an error received from the exchange server, specifically exchange server 2007.
There is a known BUG that Microsoft has been working for the last few months that occurs between WM6.1 and Exchange server 2007. If you mail from your phone on your exchange account, it will send the mail, however the mail remains in your PPC outbox that results in sending the mail again upon the next server sync. The mail never leaves your outbox - resulting in the error dialog, and the mail sending over and over - 26 times for me last night to a group of 20+ people.
I may have to downgrade my Tilt to WM6.0, unless I can find a magical way of deleting the email from the PPC outbox after it is sent....
Click to expand...
Click to collapse
umm...are you sure about this, what about the people that have never used an exchange setup. or are you saying that by default, that the phone is trying to connect to an exchange server?
What I am trying to say is if you are using an exchange server for you email - as I do for work, then this bug occurs only for the OUTLOOK mail.
I have two yahoo accounts and one gmail account and I do not get this "stuck" sent mail in the outbox. Only in the OUTLOOK mail that communicates with the company exchange server.
Sorry for the confusion...
Well, I have to downgrade back to 6.0. Bummer! I was enjoying the battery life from the new radio in the ATT6.1 rom.
I sent one mail from my device, went straight to the OUTBOX to delete the mail - and during this 30 second time frame, it sent the mail 5 times!
Just a warning, if you are using exchange server 2007 - do NOT upgrade to 6.1. Sending mail is just broke.
I use WM 6.1 and ES 2007 without issue, never heard of this bug. Do you know anyone else at your job with the same issue?
another issue
hi i have another issue with AS and i cant seem to find anyone else with the same problem. while syncing music/videos with wmp11 on vista the connection is always lost about 1/4 the sync list. anyone know about this?
marty...
Yes I do. Someone just got a TILT for work that came with 6.1 already installed. He has the same issue with the email.
I have searched all weekend for a solution to this with no luck.
I upgraded my TILT to the new official ROM.
I am using exchange server for my email.
When I am using the device or sometimes when I start to use it, a window is opened full screen with the title "Activesync." The form has a big empty rectangle in it.
I know the device is "syncing" however , i don't want it moving to the top of everything I am working on.
Is there a way to hide this function?
Thanks
thex
I don't use exchange server myself but have you tried changing your schedule settings to sync manually. I beilve it's in activesync/menu/schedule
HBEAR,
Yes I have. I tried setting it to exclusive. Heck, I even mapped the PPT button to show the today screen to get by the popup.
The popup you are seeing is the error from exchange server. When you send mail from the exchange account, the mail will get stuck in the outbox and keep sending until you delete it yourself.
Our company is going to implement the Microsoft patch to fix this in the middle of October. I couldn't wait, so I downgraded back to 6.0. TF2D works great on it. However, now my battery drains fast again.
I looked through the forums to see what radio and SPL that could be flashed for a 6.0 rom but everything I found was for 6.1. So I am using the unbloated ATT rom.
Man i miss the 6.1 radio!

[Q] Q: Exchange server

Hi guys,
Shoot me if this particular issue has shown up somewhere... (couldnt find it)
I am having problems connecting to the exchange server at work. My company has a very high security standard.
They have you digitally agree to usage conditions, and then have to activate you somewhere on a firewall...
They are using WOSH (whatever that is) ?
Now officially they said it would be only for rotten Apple phones. However i was told in confidence by enterprise application support it would work on any phone having exchange capabilties.
I have tried several programs: k9, touchdown, and now that standard android one.
In the guide to set it up for apple the information to enter is almost the same:
I now try with settings/accounts/add acount
email adress:
[email protected]
password:
Abcd1234
Next it fails and continues with:
domain/username
servercorp/firstletterlastname (1st letter of your first name + 7 of your last name)
password:
Abcd1234
Server:
wosh.server.com
Then there are options for using SSL
Use secured SSL connection
Accept all SSL certificates
here it mentions some ID: androidc2398921038
Client Certificate
This is how far I get, the guide continues with having to set a PIN after succesfull connection.... ?
I tried many permentations, in all cases I get "could not connect to server", i checked the server (wosh.server.com) it does resolve but does not allow ping.
Particulars / questions:
In the guide from work it does not mention SSL settings (and I tried with and without). In the guide there is a seperate field for Domain. The domain/username field shows up like that but in the prefilled example it show the slash backward instead of forward (\ vs /) I tried both to no avail.
Is there something specific to how apple phones identify themselves ? Can I mimmick that ? Could it be that kind off ID ?
Since they are so security sensitive could it be i need a client certifcate (it is not mentioned in the guide) ?
Are there any tests (telnet ?) i can do to find out the correct settings/changes ?
It is alot, I know, hope someone has an idea ?
Arawac said:
Hi guys,
Shoot me if this particular issue has shown up somewhere... (couldnt find it)
I am having problems connecting to the exchange server at work. My company has a very high security standard.
They have you digitally agree to usage conditions, and then have to activate you somewhere on a firewall...
They are using WOSH (whatever that is) ?
Now officially they said it would be only for rotten Apple phones. However i was told in confidence by enterprise application support it would work on any phone having exchange capabilties.
I have tried several programs: k9, touchdown, and now that standard android one.
In the guide to set it up for apple the information to enter is almost the same:
I now try with settings/accounts/add acount
email adress:
[email protected]
password:
Abcd1234
Next it fails and continues with:
domain/username
servercorp/firstletterlastname (1st letter of your first name + 7 of your last name)
password:
Abcd1234
Server:
wosh.server.com
Then there are options for using SSL
Use secured SSL connection
Accept all SSL certificates
here it mentions some ID: androidc2398921038
Client Certificate
This is how far I get, the guide continues with having to set a PIN after succesfull connection.... ?
I tried many permentations, in all cases I get "could not connect to server", i checked the server (wosh.server.com) it does resolve but does not allow ping.
Particulars / questions:
In the guide from work it does not mention SSL settings (and I tried with and without). In the guide there is a seperate field for Domain. The domain/username field shows up like that but in the prefilled example it show the slash backward instead of forward (\ vs /) I tried both to no avail.
Is there something specific to how apple phones identify themselves ? Can I mimmick that ? Could it be that kind off ID ?
Since they are so security sensitive could it be i need a client certifcate (it is not mentioned in the guide) ?
Are there any tests (telnet ?) i can do to find out the correct settings/changes ?
It is alot, I know, hope someone has an idea ?
Click to expand...
Click to collapse
So which client are you using now? This one?
If so format under Manual setup is:
domain\loginid
account pw
server.domain.ext
Use SSL
Accept All SSL
The ASOP client linked above supports (and ignores) most Exchange Policies.
If that doesn't work it's server related, it may pay to check in one of these threads but I don't know if they'll help with server issues:
http://forum.xda-developers.com/showthread.php?t=655649
http://forum.xda-developers.com/showthread.php?t=775007
Success.
yup using that one,
checking the other threads you posted..
hmmm,
In this http://forum.xda-developers.com/showpost.php?p=12005679&postcount=49
you post some code aswell, do i need to use that to install the email.apk ? i just copied to sd and installed from there...
For starters I would like the policies implemented, scary i know, but at least I will adhere to company policies
Is there a way to check the device ID ? seems like different apps send different device IDs
Arawac said:
hmmm,
In this http://forum.xda-developers.com/showpost.php?p=12005679&postcount=49
you post some code aswell, do i need to use that to install the email.apk ? i just copied to sd and installed from there...
For starters I would like the policies implemented, scary i know, but at least I will adhere to company policies
Is there a way to check the device ID ? seems like different apps send different device IDs
Click to expand...
Click to collapse
Yes, it needs to run from /system/app/ so you'll need to follow the instructions on that page or use Root Explorer to drop it in there.
If you want one with Exchange Policies implemented you'll need to get a stock Froyo one from a custom rom somewhere (my Nexus ROM has it, see sig but make sure you get the CM6/Froyo version).
Not sure about device ID.
well I put the app on system app, using the sdk, seems fine only still not possible to use the exchange server....
Arawac said:
well I put the app on system app, using the sdk, seems fine only still not possible to use the exchange server....
Click to expand...
Click to collapse
I think you'll need to check with your server admin sorry.
NP thanks for the help, also tried the stock one from your sig (not the gingerbread one) same result unfortunately...
Has anyone managed to get Excange Server to work?
I get it to work the first ½ hour (mail appears quickly, but calender and contacts takes quite some time to load).
Now the issues:
- After about ½ hour it cannot sync anymore unless removing and reinstalling Exchange Server. What is the trick?
- I do not get to understand why all my contacts disapear if I remove Exchange Server. Any way to have them saved?
- I cannot edit my appointments, only add alarms. Perhaps another calender program?
- Can the different calenders (google, outlook and LG PC sync) be merged
Phone just hard reset and only Exchange Server activated. Without the Exchange Server I do not want to keep the phone. At the same time it works fine on my Wildfire (from where I comy the settings) and on my Touch Diamond.
Nuri58 said:
Has anyone managed to get Excange Server to work?
I get it to work the first ½ hour (mail appears quickly, but calender and contacts takes quite some time to load).
Now the issues:
- After about ½ hour it cannot sync anymore unless removing and reinstalling Exchange Server. What is the trick?
- I do not get to understand why all my contacts disapear if I remove Exchange Server. Any way to have them saved?
- I cannot edit my appointments, only add alarms. Perhaps another calender program?
- Can the different calenders (google, outlook and LG PC sync) be merged
Phone just hard reset and only Exchange Server activated. Without the Exchange Server I do not want to keep the phone. At the same time it works fine on my Wildfire (from where I comy the settings) and on my Touch Diamond.
Click to expand...
Click to collapse
Using two exchange servers on mine.. Aosp email client wo sec.
Sent from my LG-P990 using XDA App
Nuri58 said:
Has anyone managed to get Excange Server to work?
I get it to work the first ½ hour (mail appears quickly, but calender and contacts takes quite some time to load).
Now the issues:
- After about ½ hour it cannot sync anymore unless removing and reinstalling Exchange Server. What is the trick?
- I do not get to understand why all my contacts disapear if I remove Exchange Server. Any way to have them saved?
- I cannot edit my appointments, only add alarms. Perhaps another calender program?
- Can the different calenders (google, outlook and LG PC sync) be merged
Phone just hard reset and only Exchange Server activated. Without the Exchange Server I do not want to keep the phone. At the same time it works fine on my Wildfire (from where I comy the settings) and on my Touch Diamond.
Click to expand...
Click to collapse
reidar.ostrem said:
Using two exchange servers on mine.. Aosp email client wo sec.
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=12005679&postcount=49

Categories

Resources