Hi guys.
I'm fed up of having no backlight on the password screen, when using the lock function.
When i turn the kaiser on, it doesnt light up, until i type in the pin code and get back to the today screen, in the dark its a joke trying to see thescreen.
Any ideas?
Thanks
+1. This is a pain also when out in the sun. Is there any reg key or anything that as soon as you touch the 'Unlock' or 'Password' softkey you get the backlight on?
Function As Designed.
The Backlight turns off when the Phone is Locked. It goes to "sleep."
Try This. Start -> Settings -> Keylock -> "Do not Lock Keys" Then OK Lock your Device and Hit The OK or Green Phone Button and see if it lights up.
doesn't work.
i had the same problem (i had played wih "onlock" "auto lock" apps
well there is somewhere a reg key for the backlight and the duration how long the backlight should be on if phone is on lock mode and somebody touc the screen ....
hmm - maybe i found somewhere the reg key.
cu camel
Related
Hey, i recently hard resetted my device and i am having an issue with my keyboard. The backlight turns off after 30 seconds(adjustable), but shouldn't it turn back on when i type(it just stays off)? I cant seem to find the setting for that... and yes, it did turn on the light before the hard reset.
*edit*
fixed it -> buttons -> uncheck enable backlight autosensor
Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
mrbofus said:
Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
Click to expand...
Click to collapse
I have the same issue after a phone call....
Same issue here too... it doesn't happen when on USB-power... and I don't remember it doing this before the security-Exchange policy was forced onto my phone.
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
I think this happens coz the phone goes into standby / lock mode during your phone call. Just press the on/off button to turn screen off, and press again to turn on. Now your phone will be responsive again.
Minor bug.
Or you can just scroll the volume wheel to turn it back on.
michi123 said:
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
Click to expand...
Click to collapse
thanks michi
thanks everyone for your replies. I will try the StayUnlock application.
I still don't understand my second issue though. If the bug is causing this issue, shouldn't it at least be consistent in either requiring me to type in my PIN or just hit the unlock button? I have set my phone to lock after 12 hours, so it should never ask for my PIN, just the unlock button...
I now see that people have been having the first issue since the Cingular 8125 but I have been unable to find any references to my second issue.
ATT Til and Backlight
When making a phone call, once connected, about 12 seconds later the screen goes dark regardless of the setting on the backlight. I am not using a password, and the only way to get back is to use the power button. using the phone button puts the call on hold
Hey guys,
Right, I've come over from symbian, namely UIQ and the SE P-series, so am used to things being somewhat different. The main issue I don't seem to be able to find a solution to is the screen locking problem.
Essentially, at the moment I push the power button to lock the device, as well as enter a power save mode. I have to say, I like the way that works. However, when I recieve a call (or text with the reg fix) the phone comes to life, great, but say I miss the call, or the phone is in my pocket, the screen is now ACTIVE. Not good news.
How am I supposed to lock this device properly? Screen lock and then the power button? Can't I get a simple tap on the power button to lock and power save the device?
Essentially, if I have a missed call or message I just want the phone to vibrate once, then keep an LED flashing intermittently. But I want the screen to stay LOCKED.
Any help would be much appreciated, and thanks for all the other useful tips on the forum!
Cheers,
Daz.
Go start/settings/System/Long Press End Key
Select automatically execute etc
and Lock device
then OK
then, a long press on the hang up button (bottom right) will lock the phone.
Hope that helps
Perhaps I didn't explain myself. I know how to lock the phone, but how do I make use of the power button tap mode? In other words, the power saving mode?
Can I set up a button that locks the phone, AND sends it to power save mode? (or "turn it off" as WM seems to call it).
Thanks again,
Daz.
I found a regedit in:
HKLM\Software\HTC\KeyLock\SameAsDeviceLock
Set it to 1, but it doesn't do the trick. In fact, it now causes the power button click to not lock the keys.
I suppose the only option is to have standby mode come on after a timeout, lock the device, then it will go into standby on its own. Seems like a slight waste of battery to me!
Cheers,
Daz.
I really want this to work too,
It should unlock and turn on when recieving a call, it should just turn on when recieving an sms (so you can have a quick look from who it is, and then unlock to reply)
and when you lock the device it should automatically turn off...
Not EXACTLY what you want, but S2U2 in the "Development and Hacking" section will improve matters for you.
When you turn the phone off with the power button, S2U2 kicks in. Then:
1) If you turn the phone back on, you'll get the slide to unlock screen.
2) If a call comes in, the phone turns on and you see the caller ID (with full screen picture, if you so desire) on a "slide to answer" screen. The S2U2 default settings ensure that the phone turns itself back off again if you fail to answer it.
3) If a text / e-mail / mms comes through, it notifies you but remains off... When you hit the power button, the "slide to unlock" screen will show missed calls, text messages, e-mails (and even the weather if you want...).
Check it out, it's an essential piece of software in my opinion... http://forum.xda-developers.com/showthread.php?t=381588
Thanks sub69, great recommendation. However, does anyone else get the bug when hitting the "x" in other applications to close them, the status bar (Or task bar) goes all scrambled and looks like the S2U2 status bar.
Shame this isn't built in though, would be nicer to see the TF3D interface rather than a 3rd party one.
Thanks again!
Daz.
Anyone with other suggestions? S2U2 is just a little too buggy at the moment on the diamond...
use "BatteryStatus" from www.chti-tai.info, they have a option for devicelock on wakeup, so even u missed a call, and the screen light up, it is still locked.
somone posted this on other thread.
--------------------------------------------------------------------------------
Now we don't need any devicelock software with diamond.
If you want automatic lock your diamond you have to change this registry key HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off automatically your device are locked
Sorry for may bad english but i'm italian.
Ciao
Thanks for that reg fix, seems like a good option. There was a new S2U2 version release, 1.5, and that seems to work well for me. Will see how that goes for now...
Cheers guys! Daz.
the reg edit is good, but it doesn't solve the problem of unlocked touchscreen prone to being pressed during incoming call (when scrambling in your pocket to take out the phone)
btw there are several other threads where this problem is addressed and deeply analyzed (without a complete working solution, however...)
dazbradbury take a look at sensorlock, if you have not already.
I've made my Diamond auto lock when my display gets dimmed, with:
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1
This is good, but I wan't to be able to lock my phone instantly.
I know I can press and hold the right phone button to lock it. But it takes about 4 seconds. Is there anyway to change this delay?
Also, is there ANOTHER way to unlock my phone again? So I DON'T have to use the touch screen? Like first pressing the round enter button and then down or left, right after?
my htc touch will not go past 'windows mobile' screen on turn on & will not turn off or do anything else, can you help
To lock the phone I just give the power button a quick press. To unlock without touching the screen just remove the stylus.
...or use this http://ae.inc.ru/aebplus.php . its a really neat application especially because of the minimum of hardware buttons on the diamond. I have configured it to lock the screen when i double press my "hang up/disconnect" button and switching wi-fi on/off when I longpress one of my volumebuttons...
Jummy said:
...or use this http://ae.inc.ru/aebplus.php . its a really neat application especially because of the minimum of hardware buttons on the diamond. I have configured it to lock the screen when i double press my "hang up/disconnect" button and switching wi-fi on/off when I longpress one of my volumebuttons...
Click to expand...
Click to collapse
yeah I know that program.. I've used it before but it kept crashing..
But I'll give it another try.
Hi, please forgive me for asking such a dumb question. I imagine my problem is not that uncommon. By default, the phone turns off back light if I don't touch any key for 30 seconds (feels like shorter than that). Anyway, I dial in to check my voicemail. Due to the length of the message, the back light turns off. It looks like there is no key other than the power button can bring the screen back. Sometimes, I have to press the power button a couple of times before the screen comes back, then when I try to delete the message (by pressing 7) sometimes I don't even see the keypad any more. It's just a bit of hassle. Can you tell me how you would do it?
thanks very much!
I'm not sure if there's an option for the phone not to switch the backlight off and/or go to sleep while in a phone call.
If you want to control the duration before the phone switches off the backlight or goes to sleep, you will have to change the backlight or power settings ujnder Settings -> System.
didn't know when and how it was set at 10 sec backlight
somynex said:
I'm not sure if there's an option for the phone not to switch the backlight off and/or go to sleep while in a phone call.
If you want to control the duration before the phone switches off the backlight or goes to sleep, you will have to change the backlight or power settings ujnder Settings -> System.
Click to expand...
Click to collapse
Thanks! I went into Settings -> System -> backlight and realized that it was set to was set at 10 sec on battery. I don't know when it got changed. Reset it back to 30 sec. should be better now. Changed the power to turn off after 3 min, too.