Tilt Keys Diffferent Than Kaiser? - Tilt, TyTN II, MDA Vario III General

I have a AT&T Tilt and I flashed it to the kaiser rom. The keys dont match up to those painted on the keypad (specifically certain symbol keys) is there an app, tweak, or fix for this?

Search! Use search key please! There is a fix. If you searched "Keyboard fix" In the kaiser section you'd find it. But its okay >.> Here I even got the thread for you because it took no more than 3 seconds to get to. Link

Related

Remap keys on Tytn II / Kaiser

I just flashed my Tytn II with a new rom and some of my keys are now wrong i.e. press fn Q and get ! instead of @. I've searched and cannot find a fix for this. I tried putting on Alex's keyboard fix and it didn't work. Does anyone know where I can find the file that has to be edited to the right characters or a cab that will do it for me. Sorry if this has been asked before but I've been searching for 2 hours and can't find anything. Thanks
Use Schap's Advanced Configuration Tool to change Keyboard Layout parameter.
Thanks, but I tried that too and it doesn't work. Is there not a txt file or something which I can edit?
I created a virtual keymapping for the difference between the HTC Herald & T-mobile Wing. Maybe this will work for you because it sounds just like the problem we had over in the Herald forum....
So try this :
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch
Use the Herald keyboard Fix ... because i think the herald & kaiser have the same keyboard layout.
duprade said:
I created a virtual keymapping for the difference between the HTC Herald & T-mobile Wing. Maybe this will work for you because it sounds just like the problem we had over in the Herald forum....
So try this :
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch
Use the Herald keyboard Fix ... because i think the herald & kaiser have the same keyboard layout.
Click to expand...
Click to collapse
Thanks for the response... But it didn't work either. I appreciate the help though. Any other manual ways to do this?
up
up up up up up
OK, I got it working thanks to a great member who had already dealt with this so I copied and pasted from the other thread and here's the answer:
4) The Rogers ROM changes the hardware keyboard layout. The layout is the same as used by the AT&T Tilt and so some of the keys behave differently (for example pressing @ brings up a ! and visa-versa). To fix this problem I needed to delete the registry key HKLM>HARDWARE>DEVICEMAP>KEYBD>CWSLayout
credits to Rumball on this thread
http://forum.xda-developers.com/show...=364789&page=3
Hi,
I've recently bought an HTC TyTN II and am having problems with the keyboard. The "alt" keys are not how they are mapped on the keyboard, and I can't get a comma.
I've tried the above methods apart from the Rogers ROM, the link supplied isn't active any longer and googling the rom there are loads to choose from.
Can anybody help me?
Cheers,
Craig
angrymoose said:
Hi,
I've recently bought an HTC TyTN II and am having problems with the keyboard. The "alt" keys are not how they are mapped on the keyboard, and I can't get a comma.
I've tried the above methods apart from the Rogers ROM, the link supplied isn't active any longer and googling the rom there are loads to choose from.
Can anybody help me?
Cheers,
Craig
Click to expand...
Click to collapse
try to install Tilt keyboard fix

shift button

Good day all. how are you? hope all is well. i recently purchased a kaiser running dutty's WM 6.1 version. can anyone tell me where i can find the shift key on the keyboard? i looked and cant seem to find it anywhere. thanks in advance
for me its the 2nd button on the bottom left side...
Same here:
2nd button up on the far left of the keyboard. Or you could say the first button on the third row.
All the keyboards I've seen show it as the "Caps Shift" button.
If you using that and saying its not working then it might be the keyboard mapping is messed up. There is a registry key that can fix that problem.

need help virtual keyboard

I've done a a lot of reading and made good progress, but I'm stuck on this one.
I'm using "Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16_27 [FIX]" build atm and while it's fast and I like it for the most part, the keyboard is horrible, takes up half the screen is missing keys and I really don't like it. I've tried to get back the original keyboard but it won't all me to switch from the one he has built into the rom. I've uninstalled the pcm keyboard and installing Keyboard_Cert.reg KeyboardSkins.CAB and also SJ KeybSkin_Touch.cab. in several variations. At best I was able to turn the keyboard white with black letters.
How can i get rid of the pcm keyboard and load the defaults.
please help
p.s. How come many of the dutty roms and have a password and they say the password is in the 1st/2nd post but it's not? I read some of those 6 times and searched them for "pass" and never found the password. I found some people listing a password later in the thread, but it was a password that did not work.
Am I writing in the wrong language or something? I've spent at least 20 hours reading wikii and faq's and post after post and seariching with google and the site's built in search only to wind up going in circles, trying to find specific answers, but not getting anywhere.
Would someone please point me to the info or just tell me ?
Still need help
yea this thread should be answered i have having the same problem..
I have Duttys Diamond V1 ROM. I didn't like the default kayboard or the XT9 that guesses what word your trying to type. My ROM did have the original defult keyboard installed but it would not stay my defult keyboard after a soft reset. I'm not sure exactly what you issue is but this might help.
Install "disable XT9" cab to disable XT9
Install "SIP change" cab change the defult kayboard to the one of you choice.
the above can be found here (look for post 139, should be the 4th post down):
http://forum.xda-developers.com/showthread.php?t=398271&page=161
I'm also including:
the "OEM default Keyboard" cab, with I assume installs the OEM keyboard (if you don't have it), and "Tilt keyboard fix" incase you have a Tilt with a hardware keyboard that dosen't have the FN keys coerectly mapped fot the Tilt.
Hope that's what you looking for.
Thanks worked fine only took about 1 min.
jonb2 said:
Thanks worked fine only took about 1 min.
Click to expand...
Click to collapse
Glad to help...

Change TP2's keyboard layout to tilt 2????

I installed Energy Leo ROM on my tilt 2 and that thing is absolutely GREAT!!!
I have one problem, i text alot and the ROM i installed was for the TP2 and it has a different keyboard layout so my keys don't match, any one that can help???
tilt2.blownfuze.org/rhodium/Tilt2HWKeyboard.cab
please use the search function next time
Obviously search is the first thing anyone tries.
I have searched for 3 hours for a fix and have found several CABs, none of which have fixed my keyboard layout. This one doesn't work either. The entire top row of my TP2's keyboard is numbers. When I hit the numbers (even after installing any of the above-mentioned CABs), different symbols come up like @_!()'":/.
Anyone have a fix for a new RHOD210 Touch Pro from T-Mobile? I bought it this week and have been looking for days for a fix. Any way of modifying it myself?
thesecondsfade said:
Obviously search is the first thing anyone tries.
I have searched for 3 hours for a fix and have found several CABs, none of which have fixed my keyboard layout. This one doesn't work either. The entire top row of my TP2's keyboard is numbers. When I hit the numbers (even after installing any of the above-mentioned CABs), different symbols come up like @_!()'":/.
Anyone have a fix for a new RHOD210 Touch Pro from T-Mobile? I bought it this week and have been looking for days for a fix. Any way of modifying it myself?
Click to expand...
Click to collapse
http://thewingster.com/Documents/Keyboard and Home Key Fix (T-Mobile TP2).cab
Broman400 said:
http://thewingster.com/Documents/Keyboard and Home Key Fix (T-Mobile TP2).cab
Click to expand...
Click to collapse
That fixes my Home Key going to the Start Menu, but the keyboard is still not laid out right.
Can someone maybe extract the Keyboard Map DLL from the stock Tmobile ROM so we can just replace it? I'm not sure if the needed file is SbdNopAll.dll or what...
Works great in a blink of an eye, thanks alot xredjokerx!!!

Why don't the function keys work on cooked ROMS?

I just flashed a Cell Evo V7.5 ROM and its amazing however my function keys do not allow me to use my blue number and symbol secondary keys. Caps key works fine.
Anyone know a work around?
the keyboard is not the same on all of the tp2's. enrgy rom has a util that does a customization on the keyboard and gets it working for specific models look for that or find a keyboard map for your model
How do you get keyboard maps?
If you have an AT&T branded Rhodium (Tilt2) you can grab the Tilt2 layout fix here, and if you have the T-Mobile US branded Rhodium, the layout fix is here.
It's amazing how many "new" people can figure out how to start a new thread on a topic that's discussed a million times over but they can't figure out how to search the forum themselves and find the answers...
Search tools are your friend!!!
Even if you cant figure out how to use the search feature that's build into EVERY page on XDA just go into google and search what you are looking for... ie lets say you are with ATT and you want the keyboard fix search "Tilt2 keyboard fix XDA" and odds are you'll find the pages you need.
I did check, but with scrolling through walls of text is very hard on your eyes when you don't exactly know what your looking for, all the topics are long lines of text and numbers.
I don't know how you'd expect me to know to type KEY MAPPING in search if I had no idea what a Key Map is.

Categories

Resources