Hi all, i'm just after some help with AE button on my Diamond. I've done all the usual searches but to no avail.
I've installed AEB and setup 'long press of volume up' to turn display on/off. This is so i can save battery life when i'm using gps software without losing my current gps positions.
The problem i have is that the volume up button i've configured only works on the main today screen. Once i'm into a program it does not work.
Have i done something wrong maybe or is it just not possible?
Thanks friends.
Anyone?
How can I make AEButton work other than just in today screen?
- sorry i am desperate!
The new tilt sensor program GSEN has an option to turn the screen off when you put the phone face down. It'll solve your problem...
Related
My MDA III has been recovered after sunk into water. But something's going wrong since then....
My Power button[Hardware] can only TURN ON the device. And if I want to turn it off the only way to do is use a software function, etc, psShutXP...
Could anyone give me a solution? I think we can assign the [Susspend] function of SPB Pocket Plus to Power Button to turn it off, But.... how can I do?
Please help me!
Thank in advance!
MicMeo: check out my app VJKeyPress. It will emulate pressing the power button. You can assign this to a spare hardware key, today launcher, startmenu item, voice tag, whatever!
Other apps will do the same thing as well.
V
Hi all,
a few days ago i saw a strange behaviour of my X1
If i push the on/off button the X1 starts the phone app and sometimes even the caroussel function of MS3.
I didn't install new apps or change reg keys.
The system was running almost perfect in the last months
After a hardreset yesterday i reconfigured my X1 and it seemed well for the moment. I turned the device on and off several times and it showed normal behaviour.
A few hours later (X1 was not in use) i pushed the on/off button and the problem was back again...
IMO the X1 acts like someone pushes the left silver button and sometimes the green tel button.
Has anyone an explanation for this?
Ideas for solving?
Thanks
Horst
one program I use on the X1 is called AE button Plus
it can remap all the hardware buttons on my X1, maybe you can try them and see if you can set the ON/OFF button from there, overriding your default action for a temp fix
Same problem here, after my xperia fall deep into the water!
I fixed this using s2u2
Thank you guys for the answers.
What i'm looking for is a reg key that changed or sth like that.
Unfortunately my knowledge about the registry isn't very good.
Perhaps one of the WM pros reads this and can give me an idea where to look...
Thanks
Horst
My kaisers power button has split in half on me, Im wondering if i can change the PTT button to be the power button thru maybe a registry change or possibly another alternative. As u kno the power button blacks the screen and locks it so u cant push buttons, and i really dont want to dial in my pocket. Can someone please help me???? I dont want to throw away a prefectly good phone bcuz of a poorly made button. Thank you guys
well i took my phone apart and swapped the camera buton for the power button, but who knows how long this one will last. Does anyone know of any reg hacks, or software that will lock the phone on a button press maybe PTT button?
Very good that you have the technical ability to do what you did
In order to not use the power button so much I advise you to install a lock utility like S2U2 for example (I suggest it because I use it and it has a very nice interface). There are also smaller and lighter apps around. Just have a look.
In addition to that you have to change the key lock settings of the phone to "lock keys if phone is locked". This will enable you to wake the phone up with any key on the phone. In order to not activate any functions of the phone with this setting you have to set the timeout of S2U2 on wakeup to 0. This way S2U2 kicks in before any of the key functions come in.
By doing these things I am able to have a phone that does not dial in my pocket and I do not use the power button to wake it up. I use the wheel.
I hope this helps.
Hi everyone,
I got a HTC Tytn 2 and i have a problem with it.
When i boot the phone it starts up and goes into windows like every windows mobile phone.
But when i press the standby button my screen wont go out of standby.
Only when i reset the phone it will work again.
Anyone got idea's ?
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
WGN88 said:
Oke, since no one responded.
Is there any way how i can make the Power Button replaced with the Speed Dial Button.
Because i think my power button is broke.
Click to expand...
Click to collapse
Have you at least tried backing up your data and doing a hard reset first ?
Yes, and i have also tried to put on a new rom and even updated the radio.
Iam a little bit out of idea's...
here are some more ideas:
1. how to test the power button: you say pressing the power button does not wake up the device once it goes to sleep. conversely, does pressing the power button put the device to sleep while the screen is on? if the power button is unable to make the device go off->on as well as on->off, then the power button is likely broken. if pressing the button achieves on->off, then the power button is probably ok and some software issue becomes more likely.
2. how to enable wake on pressing ANY hardware button: look for an option in Settings. i can't tell you the exact option because the ROM i am using does not have a link for this option, but this option does exist 100% in stock ROM and in lots of other ROMs. it contains settings like "Lock all buttons except power button" and "Keep all buttons unlocked" or something similar. by using the second option, pressing ANY hardware button while the screen is off will wake up the device.
3. you can use AE button plus to perform even more advanced button (re)mappings.
4. just to be sure that your device is really working correct, does the screen wake up when you call the phone or when you receive a text message? if it does not wake up even then, then search for "sleep of death".
Thanks for the response.
I think its a Service of Death problem.
Because when i try calling/smsing it, it wont go on
The buttons do work then...hopefully there's a fix for this problem...
Oke, i tried switching to 2G or 3G only but that didn't fix my Standby of Death.
I also bought a new sim card of vodafone so i wont get a No Sim error.
But what can i do now about it...it hangs like every 5 min...
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
WGN88 said:
Okay, after a will testing, the phone hangs every time its almost like when iam on the road with my tytn 2 and placing it upside down, it hangs.
But when iam putting it in the leather holder it doesn't hang.
Any had the same problems ?
Click to expand...
Click to collapse
Maybe it's hardware and something is coming loose
Hi there,
My Home button press function (mechanical) having some bad contacts and every minutes my phone xiaomi mi5 awakes from sleep mode, lowering my battery life.
Today it s even worse, it closes the app i using for returning to the home screen.
I wish to find a way to completely disable the press home button mechanical function, the fingerprint recon is ok, and the touch home button too.
I hope some of you will find a way to resolve my issue.
Thx.
same problem since last 2 months
if anyone can suggest some solution, it would be really helpful.
flash RR.Enable software keys and disable hardware keys on customization menu on settings
The problem resolved by itself, it must been some moisture that was stuck in it.
About weeks later it s now so fully functional.