When I leave my TD on the batterycharger overnight it softresets itself.
Really strange and really annoying.
Does someone know what is causing this?
Hi,
here the same and it was not recharging. It even got blocked while charging and I had to do a soft reset.
Lambert
I have the same problem!
Related
I wonder whether anyone has had this problem before. During a phone conversation the Wing suddenly turns itself off and drops the call. Turning it back on, results in a soft reset which can freeze at the Windows logo. Then the device can only be revived by plugging it to its charger. This happens even when the battery has a full charge.
I have removed the XD card and it still behaves the same.
I have hard reset the device to its original state and still the same thing happens.
Does anyone have any ideas about what is going on?
Thanks
im no expert but ive never heard of this problem before. if a hard reset doesnt fix it either id have to guess that its a faulty wing you should get a replacement.
I had the same problem happen to me once. I charged it for a day (took a long time to charge, too...) and then it started working by itself...
Hi,
My Diamond has started behaving strangely.
It does not show the accurate status of battery.
Like, after fully charging to 100%, after leaving it sometime, or using it, it still shows 100% or may be 98%, and after a soft reset, it shows something like 90% or even less.
Why is this happening?
I even tried restoring it to earlier dates, but this problem comes again.
It something wrong with the battery, or maybe battery drivers?
Could someone please help?
Thanks.
Same problem here... i had about 1/8 of my battery power left today, i did a softreset and now i had only 1 pixel of my batterybar... the mobile shut down after the message that the battery is empty...
i can confirm this issue on the touch pro too.
today i had 84%battery when i removed it from the charge..About 5min later when i soft reset the phone it showed 100%..
Maybe its a good idea to charge it when switched off?
My diamond don't stop to charge.
I've tried with an extended battery (cheap 1800mAh) and with the official one, after a whole night (12h), my diamond is still charging.
Confirmed with PowerGuard after few tests,10h of charge , it mesure about 100 -120mA battery current, the battery voltage is 4,192-4,195 V.
Tested on wall charger and Usb.
Is anybody has the same issue?
Mine (ignito - o2's version of the diamond) does exactly the same thing. If I leave it charging over night the round led still flashes and it only shows about 80-90% charge.
However, if I do a soft reset, battery life is back to 100% and works like it's at 100%.
I've looked around and I think a few other people are having the same problem.
Update: Tried a Charger for a blackberry phone and it charged to 100%, maybe there's a problem with the wall charger?
Mine shows 99%, maybe it stuck on 99%.
If i reset it shows 100% too...
For the wall charger could you check the voltage a the end of the charge with PowerGuard
http://forum.xda-developers.com/showthread.php?t=375292&highlight=Powerguard
Mine just sticks on a random number.
Did a complete discharge then partial charge and now it won't go past 69%! I'll do a complete discharge and full charge and see what happens...
sounds like the battery is not telling the phone the truth...
The battery has a feedback built in, which tells the phones software what charge it has, it may be a faulty battery.
ive never had a wm device that dispalyed battery correctly...live with it
Well, I managed to sort my problem out with a hard reset.
Battery life, as expected, still isn't great (or rather hasn't changed), but now the phone charges to 100% every time. Not sure whether this is a fluke or not though...
I think that why TF3D doing restart at night while charging
Did You restore Your diamond after the hard reset? And if You did so is the charging behavior still correct?
The battery issue was caused by the demo version of Navigon MN7. After uninstalling this software everythig works fine.
ernst12345 said:
The battery issue was caused by the demo version of Navigon MN7. After uninstalling this software everythig works fine.
Click to expand...
Click to collapse
I have no Navigon comes with my Diamond..
I have exactly the same problem as (theboostman).
I dont thing is the battery i will send it to HTC to fix it.
I would make a hard reset before sending the diamond to htc. After doing a hard reset my diamond worked and charged well. Also try to charge your diamond in "switched off mode" (I mean holding the on/off button for 3 seconds...). Im sure the led ring will show ou a full battery within 1.5 hours!
I am not sure which software changes the settings for charging, but I am sure it is not the hardware
Could anyone tell me the default registry entry for batterypoll? Thanks!
I report a problem occurred with charging the battery:
never reaches the full load but stops at 75% and the LED does not become ever green to indicate a full charge.
U think that there is some software conflict?
I'll try a full recharge after an hard reset.... but first of do it:
some of you have the same problem? Is there any solution?
Thank you
Pirreballo said:
I report a problem occurred with charging the battery:
never reaches the full load but stops at 75% and the LED does not become ever green to indicate a full charge.
U think that there is some software conflict?
I'll try a full recharge after an hard reset.... but first of do it:
some of you have the same problem? Is there any solution?
Thank you
Click to expand...
Click to collapse
It just takes "some" time to charge, but mine gets to 100%.
same problem here.after 7 hours of charging i always find it at 84%
if i make a soft reset then tha indicator shows 98% and after 2 minutes fully charged.
i think it is a rom or radio problem.
i have heard others have issues with the battery indicator too...
same problem too. After off/on or softreset reported full charged. Even with amazing FInixVGABattery soft. It will be solved out by new ROMs
I can confirm: no softwares conflict but only a Diamond's bug!
Tanks to everybody!
charged fully at 74% but once I made a soft reset, it showed 99%. So just a small reboot
I don't have any charge issues with my TD2.. Even with FInixNOverBattery app...
Battery status always reporting correctly without any errors..
Well, this problem is certainly not for everybody. Mine charges fine to 100% and then shows a green led. Maybe a faulty device?
Im another one with this problem, after an over night charge battery only shows 76% but after a soft reset it goes up to 100%, just a pain resetting it every morning guess im lucky i use memmaid to soft reset rather then have to take back cover off etc.
The same problem
Hi I have the same problem with HTC Diamond 2 - I charge it over night and in the morning is there 75%. After soft reset it is on 100%. Is there already some solution? Thank you a lot for help.
Have a look here - but no solution yet:
Battery Charge issue - bug? Reproduceable?
Hi,
Recently I have a strange problem with my HTC Touch Diamond. Everytime when the battery is completely empty (or it has been disconnected from the phone), my phone will hard-reset.
I think the phone has some kind of back-up battery to store the settings (like some kind of bios battery) and I think this internal battery is dead.
Does anyone experienced this problem before? Is there a solution to solve this problem.
My phone is just over 2 years old.
Thanks in advance!