Database Develop

Removing YouTube link from Internet TF3D tab

Ok - I admit it - I am indeed seemingly the only person in the world who doesn't regularly view YouTube!
Therefore I'd like to remove it from my Favourites list on the Internet tab of TF3D.. although from what I can see this one is hardcoded (and not an Opera Favourite, indeed this link actually opens up the YouTube client and no Opera).
However.. while on the subject.. has anyone figured out how to control the ordering that these Favourites are displayed on the TF3D tab? From what I can make out, while within Opera they are alphabetic, in TF3D they are listed in the order they were created.
All ideas/suggestions welcomed! Thanks.

youtube...
No, you're not the only person. I don't watch youtube too. I'd like to remove it complete from the device. Any chance?

Well.. I've removed the whole internet tab from TF3D altogether (using TF3D config).
It's nothing but a globe and some links.. which I can also get from the programs tab. Ya might wanna try removing this whole tab and adding the opera link into your programs tab instead

I do not use it 2

I also had a problem with the internet tab. In my case (MDA compact IV) the opera favorites weren't displayed on the tab.
I've been searching the diamond and found some xml files in the following directory:
\Application Data\manila
There are several xml-files, choose the one for your own language-country combination. This file determines the contents of the internet tab.
1) Make a backup of the xml-file
2) Clear the read-only and the system flags of the xml-file.
3) Make the necessary changes.
4) Save and you are ready.
To remove the you-tube link, You'll have to delete the <link .... > entry from the <OperatorLinks> section.
P.S.
While you're there, you can also remove the <banner > field to get rid of the logo, and remove/change/add OperatorLinks ( e.g. the Search link), and detrmine wether you want to display the opera favorites.

By Christ. Removing the internet tab just to get rid of a bookmark is a bit bloody over the top!
Just delete the bookmarks you don't want from opera and they disappear.
How hard do you really need to make it??
Sheesh!!!
I realise that t-mobile and the other networks may have screwed with the touchflo to bugger it up, but if you have an HTC branded one then just edit the opera bookmarks!!

@Mods: perhaps someone could merge all these threads as they are all about the same topic:
http://forum.xda-developers.com/showthread.php?t=408035
http://forum.xda-developers.com/showthread.php?t=408641
The solution posted above and in the other threads seems only to work for the MDA compact IV but not for the Diamond. Does anybody know how to change the internet tab on the Diamond?

Many thanks to all - I'd given up hope after my first ask
It's nice to be able to add icons for the operator links (only 62x62 tho')

Patrickw_mdav said:
I also had a problem with the internet tab. In my case (MDA compact IV) the opera favorites weren't displayed on the tab.
I've been searching the diamond and found some xml files in the following directory:
\Application Data\manila
There are several xml-files, choose the one for your own language-country combination. This file determines the contents of the internet tab.
1) Make a backup of the xml-file
2) Clear the read-only and the system flags of the xml-file.
3) Make the necessary changes.
4) Save and you are ready.
To remove the you-tube link, You'll have to delete the <link .... > entry from the <OperatorLinks> section.
P.S.
While you're there, you can also remove the <banner > field to get rid of the logo, and remove/change/add OperatorLinks ( e.g. the Search link), and detrmine wether you want to display the opera favorites.
Click to expand...
Click to collapse
Did anybody notice that this doesn't work anymore with the new 1.93 HTC Rom?
Any new trick to remove the youtube link?

Any more ideas?
Begin to hate youtube

rhedgehog said:
Just delete the bookmarks you don't want from opera and they disappear.
How hard do you really need to make it??
Sheesh!!!
I realise that t-mobile and the other networks may have screwed with the touchflo to bugger it up, but if you have an HTC branded one then just edit the opera bookmarks!!
Click to expand...
Click to collapse
Hey retard, why don't you shut up and go back to kindergarten! He can't DO THAT. It is NOT an Opera bookmark and you can't just delete it. If it was he would have done that - don't assume everybody is as stupid as you.

XDA II said:
Did anybody notice that this doesn't work anymore with the new 1.93 HTC Rom?
Any new trick to remove the youtube link?
Click to expand...
Click to collapse
I just deleted the entire OperatorLinks section and that worked fine.

Kermode said:
I just deleted the entire OperatorLinks section and that worked fine.
Click to expand...
Click to collapse
It's not working here. I removed the also the whole OperatorLinks section and you tube still there. I've tried to remove the read only flag and the system flag of the file. Try to softreset and deactivating touchflo3d before changing the file. Nothing works for me. Also i've searching the whole windows directory for other occurencies of the text 'you tube' and found nothing related. Additionaly I tried to changed the text 'you tube' in the OperatorLinks section, but the text didn't changed in the touchflo3d after restarting.
I'm using 1.93.

I, too, am interest in this! I'm sure there has to be a registry entry to remove it. Oh registry wizards?! Where art thou???

This variant worked on Touch diamond 1.93.
I thought I was the only one that didn't see youtube as the meaning of life and the Internet. It appears that we are at least a handful.
I did something VERY similar to the above and it worked (first shot) on a TD with 1.93.
But since the above didn't work for all, I better describe EXACTLY what I did:
1) By activesync copied the XML-file to PC
2) Removed RO-fileattribute
3) Opened it with notepad
4) Renamed the <Banner to <BBanner
5) Renamed (both halfs) of <OperatorLinks> to <OOperatorLinks>
6) Saved the file
7) Copied it back to another dir on th TD
8) Removed RO on original
9) Used TotalCommander to copy my changed file over the running.
10) Pressed the red reset-button
And look and behold. After boot It worked. The globe also went.
I noticed that the .qtc files mentioned in the .xml doesn't exist at the location given. e.g.
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"​Nor anywhere else?
Actually the whole structure
"\Windows\HTC\​doesn't exist!
Nor is there anywhere a directory or registry entry "InterNetPortal" nor "Assets"!! So this is all very strange...
But the interesting thing is that the widget now only shows my favorites.
Hope it works for others as well.
I must emphasize that I didn't try the original method, so that might also have done the trick.
After change, the file looks like this
<?xml version="1.0" encoding="utf-16"?>
<InternetPortal>
<IncludeUserFavorites>True</IncludeUserFavorites>
<BBanner
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"
SelectedImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner_selected.qtc"
Text="Start webbrowser"
Width="480"
Height="215" />​ <OOperatorLinks>
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"​ />​ </OOperatorLinks>​</InternetPortal>​
----
After some more testing, I found out that the very odd values for "DefaultImagePath" and "SelectedImagePath" are MAGIC words! They could be replaced with 'any' picture-file. If the path or filename is invalid/nonexistent the picture is omitted. If these two magic values are used the standard globe will be used. The picture is scalable by height/width

Order of Opera favorites on widget, opera6.adr format
The favorites are shown on the widget in the order they appear in opera6.adr.
Opera6.adr is a rather plain text-file. But please note that by default the unix-style <LF>-only is used as line separator.
So if possible avoid editing with windows notepad, or change the <LF>'s
In vista-notepad <LF>'s are treated as zero-width blanks(!!), so it's VERY easy to get confused and mess things up. I wasted a lot of time, thinking it was a proprietary format, before I discovered the <LF>'s...
Opera Hotlist version 2.0
Options: encoding = utf8, version=3
#URL
ID==12
NAME==Google
CREATED==1223404383
URL==http://google.co.uk​#URL
ID==13
NAME==About:blank
CREATED==1223404383
URL==about:blank​​
The second dummy-link
About:blank​is useful when the globe is removed from the widget, just to open the browser. I recommend it as link number FIVE, to get it as the lowest of the five shown on the widget without swiping.

eske.rahn said:
The favorites are shown on the widget in the order they appear in opera6.adr.
Opera6.adr is a rather plain text-file. But please note that by default the unix-style <LF>-only is used as line separator.
So if possible avoid editing with windows notepad, or change the <LF>'s
In vista-notepad <LF>'s are treated as zero-width blanks(!!), so it's VERY easy to get confused and mess things up. I wasted a lot of time, thinking it was a proprietary format, before I discovered the <LF>'s...
Opera Hotlist version 2.0
Options: encoding = utf8, version=3
#URL
ID==12
NAME==Google
CREATED==1223404383
URL==http://google.co.uk​#URL
ID==13
NAME==About:blank
CREATED==1223404383
URL==about:blank​​
The second dummy-link
About:blank​is useful when the globe is removed from the widget, just to open the browser. I recommend it as link number FIVE, to get it as the lowest of the five shown on the widget without swiping.
Click to expand...
Click to collapse
How did you edit it finally?
Vista WordPad?
EDIT:
I stopped touchflo, removed read only and system checkmarks on the file. Copied it over to the PC. Used Vista wordpad to open it. Edited it and when finished clicked save. Copied the new file over to the phone, replacing the one there. Started up touchflo and it worked!

FuzzyLogic_FC said:
How did you edit it finally?
Click to expand...
Click to collapse
Well when I discovered the LF's it was easy. Just replaced LF with CRLF, this can be done in many editors.

Timbermill said:
Many thanks to all - I'd given up hope after my first ask
It's nice to be able to add icons for the operator links (only 62x62 tho')
Click to expand...
Click to collapse
How'd you manage to add icons for the operator links and are they limited to 62x62 simply due to the available space? Can icons be added for the favorites too?

"thank you for pasting the original xml file" helped me in restoring the default globe and removing telstra wap links especially the bigpond image!

M2D Weather - Adding Custom Cities Tutorial

I just copied my other post to make it easier to find over here. Hopefully you will all find it useful and enjoy the information.
For those who might not understand how to do it, just wanted to post this guide here too.
What you need:
1) HH_0409_WeatherCities.xml file. I have attached one below which you can use, or alternatively you can copy the one from the your /windows folder.
2) If you don't have the version which is already patched then you will need the N2A patched file attached below as well.
Here are the steps:
1) Open HH_0409_WeatherCities.xml using Notepad.
2) You will see many cities listed like this:
<city name="Anchorage, US" loca="NAM|US|AK|ANCHORAGE " land="United States " /> (original)
<city name="Ketchikan, AK" loca="NAM|US|AK|KETCHIKAN" land="United States" /> (copied and edited)
Simply copy one of the cities from your country, or state and then edit the city information. You will notice in the example above i have changed "Anchorage, US" to "Ketchikan, AK" as this is just what will display on the screen. The section marked loca=con"CONTINENT|COUNTRY|STATE|CITY" must be typed in correctly or else you will not get any data.
3) Repeate step 2 for as many cities as you would like to add.
4) Disable touchflo on the today screen
5) Copy Manila2D.exe (if you are not using the version already patched), and your newly edited HH_0409_WeatherCities.xml file to the /windows folder.
6) Enable touchflo on the today screen again.
7) Go to weather and add new city, the new cities should be available to you. I would remove any old cities you had before as well.
Weather won't download via edge or 3g:
For those of you still having problems with the weather plug-in here is another thing I did to fix it:
1. Go to Settings - Connections - Connections - Advanced - Select Networks - Edit (MEdia Net) - Proxy Settings -> UNCHECK BOTH OPTIONS
2. Soft Reset
It should work fine
UPDATES
banzaiwolfe said:
As a side note, I was able to just use the Zip code instead of NAM|US|AK|KETCHIKAN.
Click to expand...
Click to collapse
polyrhythmic said:
Scotchua, nice tutorial. I've been using several of your fixes since I discovered them. However, the one note missing from your Manila2D Weather Custom Cities tutoria is how to determine the loca="NAM|US|AK|KETCHIKAN".
I have the solution! For most US locations, you can use the 5-digit ZIP code, but to determine ANY location, including outside the US, use this link to AccuWeather's RSS.
Simply put in your location as instructed in the 'Choose a location' field and click 'Set'. (For this example, I used Whistler, Canada.) The page then generates a URL for you, which looks like accuweather.com/rss/liveweather_rss.asp?metric=0&locCode=NAM|CA|BC|WHISTLER. The piece after locCode= (which I've hilited in Red) is what goes in the loca="" field in the XML file.
Then complete your tutorial, and choose the custom cities! Hope this helps someone else looking to make a quick fix.
Click to expand...
Click to collapse
Here's An Entirely New Method. I tried and it works on PDA V9 (Only one i tried it on).
macrossmerrell said:
Hi all,
Here is what I did to fix my the darn weather problem using my AT&T Tilt through MediaNet.
1. Make a copy of the HH_0409_WeatherCities.xml in the Windows folder.
2. Modify the file to include your info. (for me the zip code worked). See the examples below:
Code:
<city name="Idaho Falls, ID" loca="83406" land="United States"/>
<city name="Idaho Falls, ID, US" loca="NAM|US|ID|IDAHO-FALLS" land="United States"/>
3. Copy the HH_0409_WeatherCities.xml back to your device (your storage card or My Documents)
4. Disable TouchFlo in your Today Screen settings
5. Using TotalCommander overwrite the HH_0409_WeatherCities.xml file in the Windows folder
6. Go to Settings, Connections tab, Connections program and select the "Manage existing connections" option.
7. Click the Proxy Settings tab and uncheck the "This network uses a proxy server to connect to the Internet" option.
8. Click the OK at the top left.
9. Once again, select the "Manage existing connections" option.
10. Click the "Edit..." button for your MediaNet or ISP connection
11. Click Next, Next
12. Click the "Advanced..." button
13. Click the Servers tab at the bottom
14. Click "Use specific server address" and enter the two following addresses for DNS and Alt DNS:
208.067.222.222
208.067.220.220
15. Click OK at the top, then Finish at the bottom, click OK again at the top, then OK again.
16. Reenable TouchFlo in your Today options
17. Go to the Weather Tab and Add your city
18. Enjoy
I have tested the solution on are Garmin's ROMs, but it should solve proxy server issues and DNS issues relating to AT&T's seriously out of date default DNS servers (the proxy server uses an up to date DNS server).
The above DNS servers are from OpenDNS www.opendns.com
Please post and/or PM me if this solution works for you. I've been frustrated at the lack of working weather for my area, so this is the crazy solution I came up with!
Merrell
Click to expand...
Click to collapse

Any Suggestions
Hi, I've done everything. However when I try to copy the new file I created with the HH_0409 exe there's problems.
1) when i go into windows on my device and go the the HH_file it will not let me copy it or deleate it, so i could then put in the new file.
2) when I try to copy and paste my new file titled the same HH_0409_WeatherCities to the Windows in device I get a error message that reads (error copy file, cannot copy HH_4090_WeatherCities access is denied. Be certain that there is enough free storage memory that the destination is not write-protected and that the file is not currently in use.)
I have unchecked TouchFlo as stated and done everything as listed. I'd somehow had this working when using MD2 but now that I'm using the Solace 1.5 rom, I'll be darn that I can get this to work. I'm trying to put Millsboro, DE USA into the darn thing. If you have any suggestions I'd be greatly appreciative.
Thank you in advance.
Beachboyde/Jon

beachboyde said:
Hi, I've done everything. However when I try to copy the new file I created with the HH_0409 exe there's problems.
1) when i go into windows on my device and go the the HH_file it will not let me copy it or deleate it, so i could then put in the new file.
2) when I try to copy and paste my new file titled the same HH_0409_WeatherCities to the Windows in device I get a error message that reads (error copy file, cannot copy HH_4090_WeatherCities access is denied. Be certain that there is enough free storage memory that the destination is not write-protected and that the file is not currently in use.)
I have unchecked TouchFlo as stated and done everything as listed. I'd somehow had this working when using MD2 but now that I'm using the Solace 1.5 rom, I'll be darn that I can get this to work. I'm trying to put Millsboro, DE USA into the darn thing. If you have any suggestions I'd be greatly appreciative.
Thank you in advance.
Beachboyde/Jon
Click to expand...
Click to collapse
I use total commander (which i have added as an attachement to the first post) to copy the files. If you have tf2d, and done a soft reset, but still cannot copy the files using total commander then i really don't know why your files cannot be overwritten. I've honestly never had that problem before, so i just don't have anyway to help you.

I also got that same error when I was using file explorer but I did get it to work when I used Total Commander.
I downloaded the file to my desktop.
Then opened it with notepad.
Added my city
I then choose to save as and selected the file on my desktop to be overwritten.
I copied it to my storage card.
I then copied it using total commander to the windows directory with TF2d disabled.
soft reset
enabled TF2d and it was there.

Can you give example of with zip code. I tried it using the info off the rss feed hyperlink and still nothing. Thanks.

turcomora said:
Can you give example of with zip code. I tried it using the info off the rss feed hyperlink and still nothing. Thanks.
Click to expand...
Click to collapse
First Post Updated

NOt working for me
Scotchua, thanks for taking the time to put this together. I have edited my HH_0409... file and put the cities in. Now I am able to select the custom cities as new locations but I get the "unable to download..." message for those cities whil the original cities will download weather just fine.
Any ideas?
thanks.

good stuff

iamdamon said:
Scotchua, thanks for taking the time to put this together. I have edited my HH_0409... file and put the cities in. Now I am able to select the custom cities as new locations but I get the "unable to download..." message for those cities whil the original cities will download weather just fine.
Any ideas?
thanks.
Click to expand...
Click to collapse
you need to either copy the patched manila2d.exe file over to /windows or change the DNS server addresses. I tried both methods and they work. They're both in the instructions.

Thanks!
scotchua said:
you need to either copy the patched manila2d.exe file over to /windows or change the DNS server addresses. I tried both methods and they work. They're both in the instructions.
Click to expand...
Click to collapse
Hey I appreciate the help...I am up and running now. I had saved the Manila2D.exe file to my storage card--I thought I just had to run it like a .cab but obviously (I overlooked it before) you have to save it to /windows. (I didn't have to mess with the DNS settings and I was able to simply enter using the zip code method.)
Guys like you are an asset to the forum...

scotchua said:
I use total commander (which i have added as an attachement to the first post) to copy the files. If you have tf2d, and done a soft reset, but still cannot copy the files using total commander then i really don't know why your files cannot be overwritten. I've honestly never had that problem before, so i just don't have anyway to help you.
Click to expand...
Click to collapse
can you do a step by step using total comander, I stil get a message that the files can not be replaced

I have the same problem. I am using a touch cruise with chavon bravo's rom. Cant move the manila file to windows.

NOTE: OPEN THE XML WITH NOTEPAD, NOT WORDPAD.
Word pad will translate foreign characters and will corrupt the XML file.

I did the step by step instructions, copied both files to the windows folder, and then restarted touchflo. Wheni go to Select location, its completely blank. Any ideas on this one?

still nothing
i'm using hyperdragon IV IOLITE, with touchflo but same trouble, when i've update the XML the new location appears, but when i sync nothing comes, but if i overwrite the patched Manila2d.exe now doesn't come up the manilla.
i don't need the Connection setting, cuz i'm a Mexican user, i've my own settings.
any idea, anybody know if the Hyperdragon IV IOLITE has already the manilla patched version?
this is the change in the XML NAM|MX|MX019|MONTERREY, the original MONTERREY has MX005 and comes with other weather forecast not from my city
i've tried two ways, overtwritin' the original Monterrey item, and adding another as MonterreyNL, and as i told you, in both ways the new setting pops now but can't get weather and in the other locations JUST FINE!!

Custom M2D Weather
hi guys, maybe I have the definitive solution to setting new cities on M2D weather. (or at least on my Kaiser go on)
1) in M2D weather set one city whatever you want is indifferent.
2) disable touchflo in today setup
3) open REGISTRY EDITOR and go on HKEY_LOCAL_MACHINE
then open software, then open HTC, then open Manila2D, then open Weather here you have two choice "0" and "setting" in both of them there are two item: "Location" and "Location Code". (you have to modify the item in "0" and in "setting")
So, when you tap in Location, you have to insert a string like this:
Caprese Michelangelo, It (first city name and after the nation)
When you tap in location code, you have to insert a string like this:
eur|it|it016|Caprese Michelangelo
If you want repeat for other city. At the end enable touchflo on the today screen again and upgrade the weather.
Work fine for me on my Tytn II.

original manila
where can i get the original manila2d? cuz i dont like the patched one

pincopinco,
You the man!! Just tried it on my TyTNII and worked first time! Outstanding!

pincopinco said:
hi guys, maybe I have the definitive solution to setting new cities on M2D weather. (or at least on my Kaiser go on)
1) in M2D weather set one city whatever you want is indifferent.
2) disable touchflo in today setup
3) open REGISTRY EDITOR and go on HKEY_LOCAL_MACHINE
then open software, then open HTC, then open Manila2D, then open Weather here you have two choice "0" and "setting" in both of them there are two item: "Location" and "Location Code". (you have to modify the item in "0" and in "setting")
So, when you tap in Location, you have to insert a string like this:
Caprese Michelangelo, It (first city name and after the nation)
When you tap in location code, you have to insert a string like this:
eur|it|it016|Caprese Michelangelo
If you want repeat for other city. At the end enable touchflo on the today screen again and upgrade the weather.
Work fine for me on my Tytn II.
Click to expand...
Click to collapse
I seem to have deleted a DWORD in HKLM/SOFTWARE/HTC/MANILA 2D/WEATHER/SETTINGS because the keyboard was in the way and I rewrote a DWORD by mistake. Could anyone please list all DWORDS under HKLM/SOFTWARE/HTC/MANILA 2D/WEATHER/SETTINGS?

FINALLY a simple fix-Thanks!
pincopinco said:
hi guys, maybe I have the definitive solution to setting new cities on M2D weather. (or at least on my Kaiser go on)
1) in M2D weather set one city whatever you want is indifferent.
2) disable touchflo in today setup
3) open REGISTRY EDITOR and go on HKEY_LOCAL_MACHINE
then open software, then open HTC, then open Manila2D, then open Weather here you have two choice "0" and "setting" in both of them there are two item: "Location" and "Location Code". (you have to modify the item in "0" and in "setting")
So, when you tap in Location, you have to insert a string like this:
Caprese Michelangelo, It (first city name and after the nation)
When you tap in location code, you have to insert a string like this:
eur|it|it016|Caprese Michelangelo
Click to expand...
Click to collapse
Man, thank you, thank you, thank you! This is the first fix that worked easily without messing up something else. City data now updating like a charm on my Vogue. Thanks again for sharing.

How do I make a shortcut to the Youtube app (Fuze)

I found the program but I can figure out how to make it go somewhere more accessible. Any help would be great. Thanks.

i would like
to know this too

I think they pulled this off the Fuze. They want you to use AT&T video stuff.

stevierg said:
I think they pulled this off the Fuze. They want you to use AT&T video stuff.
Click to expand...
Click to collapse
no the app is sitting is the windows folder...
and works fine

stevierg said:
I think they pulled this off the Fuze. They want you to use AT&T video stuff.
Click to expand...
Click to collapse
The youtube player is definitely on the FUZE its just not on the programs menu or the tf3d internet tab. Its hidden in the windows directory. You will have to go searching for it.

In that case use file explorer on the device and copy the youtube.exe file.
Go to the windows\startmenu\programs folder and then paste a shortcut.
Just tried it out and it works fine.

the app shows for me but does not play when copied anyone else having this issue?

I added it to the Internet tab on my Fuze, just under the homepage button and above my favorites. (Where it is on all the European versions of the Touch Pro!)
The process isn't too difficult but you'll need a good file explorer like Total Commander and if you're not comfortable editing Read-Only TF3D files, then DON'T TRY THIS!!
You'll need to edit the InternetPortal-en-US.xml file located in the \Application Data\Manila\ folder, so it's probably a good idea to make a backup of the file before you start messing with it.
Find the <OperatorLinks> section in the file.
Between <OperatorLinks> and </OperatorLinks> add this text:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"
/>
Save the file and make it Read-Only again and you should have a YouTube icon on your Internet tab.

ITNV said:
I added it to the Internet tab on my Fuze, just under the homepage button and above my favorites. (Where it is on all the European versions of the Touch Pro!)
The process isn't too difficult but you'll need a good file explorer like Total Commander and if you're not comfortable editing Read-Only TF3D files, then DON'T TRY THIS!!
You'll need to edit the InternetPortal-en-US.xml file located in the \Application Data\Manila\ folder, so it's probably a good idea to make a backup of the file before you start messing with it.
Find the <OperatorLinks> section in the file.
Between <OperatorLinks> and </OperatorLinks> add this text:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"
/>
Save the file and make it Read-Only again and you should have a YouTube icon on your Internet tab.
Click to expand...
Click to collapse
il be giving this a shot
does it get rid of the stupid media net link or is there a way?

lbhocky19 said:
il be giving this a shot
does it get rid of the stupid media net link or is there a way?
Click to expand...
Click to collapse
Yeah, you can change the default launch page in that file, too.
In the <Banner> section, edit the NavigateURL to whatever page you want it to open by default and change the Text to match.
e.g.
NavigateUrl="http://www.google.com/"
Text="Google"

ITNV said:
I added it to the Internet tab on my Fuze, just under the homepage button and above my favorites. (Where it is on all the European versions of the Touch Pro!)
The process isn't too difficult but you'll need a good file explorer like Total Commander and if you're not comfortable editing Read-Only TF3D files, then DON'T TRY THIS!!
You'll need to edit the InternetPortal-en-US.xml file located in the \Application Data\Manila\ folder, so it's probably a good idea to make a backup of the file before you start messing with it.
Find the <OperatorLinks> section in the file.
Between <OperatorLinks> and </OperatorLinks> add this text:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc"
/>
Save the file and make it Read-Only again and you should have a YouTube icon on your Internet tab.
Click to expand...
Click to collapse
Badass thank you so much!!!

Worked like a charm! Thanks!

This worked great.... Could you do a favor and put an app that would add windows live mobile just above or below the same youtube link?

Hmm. I found the app in \windows and ran it. It just sits there spinning and saying downloading. I waited several minutes, but it appears to be hung rather than doing anything; in particular, sliding out the keyboard doesn't change it to landscape mode. I am connected; I can run Opera and get to web sites. Any ideas?

wmm said:
Hmm. I found the app in \windows and ran it. It just sits there spinning and saying downloading. I waited several minutes, but it appears to be hung rather than doing anything; in particular, sliding out the keyboard doesn't change it to landscape mode. I am connected; I can run Opera and get to web sites. Any ideas?
Click to expand...
Click to collapse
Mine did the same thing the first time I ran the YouTube app. I had to change the category using the buttons at the top (from Featured to Top Rated or vice-vera) and then it worked fine.

christian15213 said:
This worked great.... Could you do a favor and put an app that would add windows live mobile just above or below the same youtube link?
Click to expand...
Click to collapse
this should work. just add this line after the YouTube one:
<Link
Text="LiveSearch"
Executable="\Program Files\Live Search\LSLaunch.exe"
ImagePath="\windows\msn.bmp" />
that's not a very good icon but it was all i could find and it's better than nothing. i'm sure someone on here can recommend a better icon but that should give you the general idea for adding apps to the internet tab.

I can't seem to find the youtube.exe program file anywhere. I looked in my programs on the Fuze and all the directories in windows explorer to no avail. Am I looking at the wrong place? Or can I download this file somewhere and install it? I am new to WinMo devices and everything is just so new to me. Any help will be greatly appreciated.

ITNV said:
Mine did the same thing the first time I ran the YouTube app. I had to change the category using the buttons at the top (from Featured to Top Rated or vice-vera) and then it worked fine.
Click to expand...
Click to collapse
Doesn't work for me -- still just "Downloading..." forever. Anybody else have any ideas?

Youtube Icon
Great advice IT, my main MediaNet globe icon was set to device.home which was a dead link or something, just hung every time I pressed it, changed it as you described and works pefectly. The YouTube works as well, but I have a question:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPort al\youtube.qtc"
/>
The \Windows\HTC folder doesn't exist (from what I can find) on my Fuze, and the Icon on the tf3d tab is just a white square. Any hints on why that would be, I copied this exactly, even put the /> on a separate line to end etc and no go.
Thank you very much.

cparkhorn said:
Great advice IT, my main MediaNet globe icon was set to device.home which was a dead link or something, just hung every time I pressed it, changed it as you described and works pefectly. The YouTube works as well, but I have a question:
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPort al\youtube.qtc"
/>
The \Windows\HTC folder doesn't exist (from what I can find) on my Fuze, and the Icon on the tf3d tab is just a white square. Any hints on why that would be, I copied this exactly, even put the /> on a separate line to end etc and no go.
Thank you very much.
Click to expand...
Click to collapse
It's not that picky, you don't need to put the /> on a separate line. For some reason a space got inserted into InternetPortal when I posted this so you might want to check to make sure you didn't include the space in your file.
I don't have a \Windows\HTC folder either. I'm pretty sure it's some kind of virtual directory that TF3D uses. I looked around a little in the Manila editing thread in the Diamond ROM forum but it's way more complicated than I want to deal with. I'm not sure why I have that icon file and you don't but I'm not running the standard AT&T theme so that might be part of the problem.
You can edit the ImagePath to point to a .jpg file that you want to use as an icon, too. For example, if you take the youtube.jpg file attached to this post and copy it to your \Windows directory on your Fuze, you can change the ImagePath to "\Windows\youtube.jpg" and that should work.

Opera 9.5 beta- path for touchflo bookmarks?

Ive installed the latest opera beta and used various aps to have the new version of the browser (not the one that came with the phone) launch from the touchflo3d menus. However, it still seems to be displaying the bookmarks from the old opera, when I edit bookmarks in the new beta they don't display on the browser touchflo tab.
For now, I copied the opera6.adr file from the beta 9.5 application data folder and overwrote the .adr file in the windows programs directory where the standard opera that came with the phone stores its files.
However, is there a registry edit or app that will allow me to edit the path to the bookmarks file that touchflo uses in its interface?

VistaVick said:
Ive installed the latest opera beta and used various aps to have the new version of the browser (not the one that came with the phone) launch from the touchflo3d menus. However, it still seems to be displaying the bookmarks from the old opera, when I edit bookmarks in the new beta they don't display on the browser touchflo tab.
For now, I copied the opera6.adr file from the beta 9.5 application data folder and overwrote the .adr file in the windows programs directory where the standard opera that came with the phone stores its files.
However, is there a registry edit or app that will allow me to edit the path to the bookmarks file that touchflo uses in its interface?
Click to expand...
Click to collapse
I have a similar problem. How can someone replace the link in the touchflo tab of internet in order to point to a different browser and not the standard coming with HTC TD?
THANXX

anybody? I am having the same problem

Hi!
I had this problem and eventually found that it is hard-coded in one of the LUA scripts. Sorry, don't know which one from memory. I tried decompiling this script, but I could not get it compliled again - even without changing a character.
So I'm sorry to say that you can't do it that way.
There IS however something you can try:
Open Opera and type opera:config in the title bar.
Under "Saved Settings" and "User Prefs" there's a bunch of paths you can modify.
You might try the "Opera Directory" path under "User Prefs".
Hope this helps.

From a quick look at the first-boot-scripts it seems that the opera6.adr file is placed eventually in \windows\opera9\opera6.adr.
The default bookmarks are cooked in in a file \windows\_opera6.adr and when you first turn on your phone it copies / moves the file to \windows\opera9\opera6.adr. The path also comes up while searching through several _manila files so that also seems to be the location where TouchFlo is looking for the bookmarks.
If you want that Internet tab to be integrated with _another_ browser you have a lot of Decompiling, recompiling, editing of LUA code and hex-editing work to.

Changing browser to point to Opera Mobile 9.5 beta
Someone else posted this & I copied into a Word doc, so I apologize for not giving proper credit:
All you need to do is to modify a file named “InternetPortal-en-US.xml” which is located in \Application Data\Manila. Use the freeware application Total Commander to navigate to this file and once you locate it press the pen/paper icon on the bottom of the page and that will open the file on the screen so you can edit it. Just so everyone knows, we’re not tweaking the registry here. I’m just using Total Commander because it is more powerful than File Explorer so don’t be afraid of it
Ok, once the file is open in Total Commander just add one of the following lines after the line <InternetPortal> which is towards the top:
Opera is:
<BrowserExe>\Windows\OperaL.exe</BrowserExe>
mobile\OperaL.exe</BrowserExe>
Internet Explorer is:
<BrowserExe>\Windows\iexplore.exe</BrowserExe>
SkyFire is:
<BrowserExe>\program files\skyfire\skyfire.exe</BrowserExe>
Iris is:
<BrowserExe>\program files\iris browser\irisbrowser.exe</BrowserExe>
I installed Opera Mobile 9.5 beta to my storage card, so my new path is:
<BrowserExe>\storage card\program files\opera
*Note if you can't save your changes - make sure that the file isn't set on "read only" (click the hand holding the paper icon and uncheck the "read only" box. You may have to click twice to remove the setting)

Yeah I do not see that file anywhere

I have the Sprint branded HTC Diamond and the \Application Data\Manila folder does not exist, I am using Total Commander.

lissa8869 said:
Someone else posted this & I copied into a Word doc, so I apologize for not giving proper credit:
All you need to do is to modify a file named “InternetPortal-en-US.xml” which is located in \Application Data\Manila. Use the freeware application Total Commander to navigate to this file and once you locate it press the pen/paper icon on the bottom of the page and that will open the file on the screen so you can edit it. Just so everyone knows, we’re not tweaking the registry here. I’m just using Total Commander because it is more powerful than File Explorer so don’t be afraid of it
Ok, once the file is open in Total Commander just add one of the following lines after the line <InternetPortal> which is towards the top:
Opera is:
<BrowserExe>\Windows\OperaL.exe</BrowserExe>
mobile\OperaL.exe</BrowserExe>
Internet Explorer is:
<BrowserExe>\Windows\iexplore.exe</BrowserExe>
SkyFire is:
<BrowserExe>\program files\skyfire\skyfire.exe</BrowserExe>
Iris is:
<BrowserExe>\program files\iris browser\irisbrowser.exe</BrowserExe>
I installed Opera Mobile 9.5 beta to my storage card, so my new path is:
<BrowserExe>\storage card\program files\opera
*Note if you can't save your changes - make sure that the file isn't set on "read only" (click the hand holding the paper icon and uncheck the "read only" box. You may have to click twice to remove the setting)
Click to expand...
Click to collapse
I saw this as a solution to make 9.5 default if you lose 9.5 as the default browser. Are you saying if I upgraded to 9.7 beta, this process will make my 9.7 bookmarks the bookmarks in the TF3D internet tab?

Adding bookmarks to TouchFLO 3d internet tab?

Anyone know how to add bookmarks to the internet -tab-, (other than youtube which is already there)?

I want to know that too

HI guy ,
for me i had to install the htc hd opera version.
then when you had a favorite in opera it adds it in the browser tab

Tylwith said:
HI guy ,
for me i had to install the htc hd opera version.
then when you had a favorite in opera it adds it in the browser tab
Click to expand...
Click to collapse
Where can I find this version? Is it this one?
http://forum.xda-developers.com/showthread.php?p=2842296#post2842296

Either that one or the one from the thread referenced at the very end of that thread.

gold333 said:
Anyone know how to add bookmarks to the internet -tab-, (other than youtube which is already there)?
Click to expand...
Click to collapse
have a look in 27c65cbd_manila, should be there, it's same sort of xml. please provide feedback if you success in your purpose

you can just edit 27c65cbd_manila to looks like this
<?xml version="1.0" encoding="utf-16"?>
<InternetPortal>
<IncludeUserFavorites>True</IncludeUserFavorites>
<Banner
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"
SelectedImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner_selected.qtc"
Width="480"
Height="215" />
<OperatorLinks>
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc" />
<Link
Text="Flickr"
Executable="http://m.flickr.com"
ImagePath="\Windows\flickricon.png" />
</OperatorLinks>
</InternetPortal>
Click to expand...
Click to collapse
Created a png icon with size 96x96px and put it in windows folder.

Is there anyway to have the Internet Tab use another browser than Opera 9.5, like Opera Mini?

if you try to search should be an appz in development&hacking able to change messaging, clock and broser invoked by manila... I remember that but I lost it in the forum please post a link when you find it, keep searching

I can add bookmarks by changing the manila file, but they all opens up in IE not opera.

JOeS said:
Where can I find this version? Is it this one?
http://forum.xda-developers.com/showthread.php?p=2842296#post2842296
Click to expand...
Click to collapse
yes this is the one

r33z said:
I can add bookmarks by changing the manila file, but they all opens up in IE not opera.
Click to expand...
Click to collapse
You can try to use xperia tweaks program to set opera as the default browser

JOeS said:
Where can I find this version? Is it this one?
http://forum.xda-developers.com/showthread.php?p=2842296#post2842296
Click to expand...
Click to collapse
Tried that version, and the bookmarks do show in TF3D. However, the physical keypad does not work perfectly (at times). One issue is that after a few seconds, the onscreen keypad closes and also stops you from using the physical pad.

To get the bookmarks in the internet tab, quickfix
the easiest way to add bookmark in the internet tab is to manually create a dir in windows called opera9 (windows\opera9)
then copy this file from root: application data\opera9\opera6.adr to the new dir in windows. (windows\opera9)
then they will show up.
this is just a quick fix, new bookmarks will not show up..

I use the TAEL rom from Oct 22nd (Windows Mobile 6.5, TF3d 2.1.38680). As you can see on my screenshot, my bookmarks are also empty. I didn't try the option to copy the file from appdata to windows because I think that there must be a config parameter to adjust the path of the bookmarks... Anyone an idea?
Thanks!
Stefan