Hello peeps
Newbie to the diamond and windows format on phones so please be gentle,
How can I get my diamond to receive files pics etc via bluetooth? every time I try I get unable to connect on either my nokia or my laptop, but I can send no problem from my diamond.
Thanks
Glenn
You have to "open" your phone for incoming files. Have you tried that?
Go to Start -> Settings -> Comm Manager and activate bluetooth. Then click settings -> Bluetooth (still in Comm Manager).
There is a tab called Mode (or something?, second from the left). Both of the options there should be checked.
Now you should be able to find your phone from your computer and send files to it.
When sending files from your phone I think it automatically starts the bluetooth, sends the file, and then closes the bluetooth.
Hope this helps
Thanks
Just tried that, the 2 boxes that are checked say, turn bluetooth on and let me be visable, still didn't work, my laptop connects to my diamond asks for pin code, enter same pin code on both devices, my pc goes to send but is unable to. exactly the same when trying to send from my nokia, any other ideas please.
Thanks Glenn
Start - Settings
Connections Tab
Beam
Check - Receive all incoming beams
Give it a shot.
All the best
Welldone mate thats the one
Chuffed to bits now
Glenn
Happy to help
Related
hi.
i have received requests from many guys, to make enable BT DUN
profiles on hw6900.
this means, connect internet via BT through cell phone like Nokia phone.
You can get connect 3G or CDMAx1 which hw6900 can not connect them.
now all english interface
PLS try guys.
--------------------------------
if you own hw6500 with pocket pc200se.
go to this link.
http://asukal.net/blog/?p=366
or
http://asukal.seesaa.net/article/5273848.html
Will this file work on the HP iPAQ 5915 running WM5.0? I want to do BT DUN from the 5915 using the hw6925 as the cellular modem.
Thanks,
Rick
rickrcomm said:
Will this file work on the HP iPAQ 5915 running WM5.0? I want to do BT DUN from the 5915 using the hw6925 as the cellular modem.
Thanks,
Rick
Click to expand...
Click to collapse
hi, 5915 has widcomm BT stuck?
If so, pls check the Version of BT.
Go to BT setting, About---and then tap Advance.
You can see the Version of Stuck.
If that version was 1.7.16700 or near to this,
Hopefully it will work.
But i dont have that device, so couldnt test on that.
PLS test as on your own risk.
(If it will not work, you have to hardreset to recover,
pls make back up your date in advance)
Hi,
Thanks for this BT DUN for the hw6900. I just installed it on my hw6945 and works great. But I can no longer use ActiveSync. It seems like the install affected the communication port for the USB. I continue to receive an error. "USB device not recognized" Is there a work around for this. When I hard reset it works, but when I re-install the Blue tooth dial up client it stops working. Thanks in Advance.
hi
i didnt face to that problem cose of this patch on my device.
But i often see that problem on my another devices
in that case, pls try following way
@Start Menu--Setting--Connection
@Tap "ActiveSync Mode" icon
@Swtich to RNDIS Sync Mode or USB Serial Sync Mode
(better try both mode, and then you can find which mode can work on your device)
Thank you, that worked. I can know access the internet using my hw6945 with my Razr V3xx as the dial-up modem.
china99boy said:
Thank you, that worked. I can know access the internet using my hw6945 with my Razr V3xx as the dial-up modem.
Click to expand...
Click to collapse
Ok, pls enjoy that!
Hi, this may be off the topic, but I installed Mobem Mphone on my Hw6945 pda so I could send and receive SMS via the bluetooth dun. The installation went well. The problem is, it does not give me the option to select Bluetooth in the drop down menu. I could only select Serial or Infrared. Instructions says that I should select Bluetooth and then select port BTC1. Does the Bt hack not provide this option or is there something else I should do. If I select Serial I am able to select COM6 which is the outgoing BT serial port on the PDA, but I get an error that no bluetooth serial port could be found on the razr v3xx. So I assume I need to have the Bluetooth BTC1 available before I can do anything. This website shows what I am trying to get done.
http://www.mobem.com/products/mphone26/qtour/6310/5450_mp_setup.htm
Any advice will be greatfully appreciated. Thanks
I might turn out to be stupid, but I see no point in doing such a thing ? what for ? 6945 has SIM card in it and can connect to internet using GPRS, which is more than enough on such a small screen ? I fail to see the point, please, enlighten me ?
I am may be the stupid one, but I know that the hw6945 has sim card and can connect with the gprs. That also works great. I normally use my Razr V3xx for my primary phone and only use my PDA occassionly. Instead of switching the sim card everytime, I just wanted to retrieve the SMS or surf from the pda via BT using my V3xx. I just tried to do the above with Indovisi SMS and that works great, so I will just use that instead. I loved the features of mPhone better so I was trying to get that working. It probaly doesn't make much sense since the hw6900 can do it all. Thanks for your help anyways.
ok i was wondering if there was anyway i could transfer a file from my Tilt with HTC rom to my wifes Treo 750 with WM6 using bluetooth..... i know i did when we both had samsung phones but now i cant seem to get it to work even after pairing the phone together, the only services that are available is dial-up networking..... please some help
Xtreme80 said:
ok i was wondering if there was anyway i could transfer a file from my Tilt with HTC rom to my wifes Treo 750 with WM6 using bluetooth..... i know i did when we both had samsung phones but now i cant seem to get it to work even after pairing the phone together, the only services that are available is dial-up networking..... please some help
Click to expand...
Click to collapse
This is a procedure that I complete when allowing an FTP transfer from the phone to a laptop. Maybe it is the same with two phones.
When partnering the phones did you check the serial port box for services?
Have you checked the "enable file sharing" box on the ftp tab in bluetooth settings on both phones?
You might delete the pairing and start over with these settings confirmed and trying transfering again.
Good luck.
On one device, enable 'Visible' under BT. On the other device, pick the file to send and hold the stylus on it. When the pop-up menu comes up, select 'Beam' and wait until the other device shows on the menu..
Can anyone help me with this problem i just bought kaiser yesterday but i notice that i cant be able to receive any file transfer from a bluetooth connection.
However i can be able to beam file through bluetooth connection to another phone.
Can anyone help to solve this problem please?
thanks
Please be more specific, in order to get answers to your question. How your problems shows? Could it be just that other devices can not see your Kaiser, if so, then you have to tick checkbox "Make this device visible to other devices" on bluetooth settings.
--
Mika
As per the last post, your device has to be set to 'Visible' in BT settings and if you want your device 'Open' to receive all beams the uncheck the box in BT settings under 'Security'
There is another setting to check.
Under Start\Settings\Connections there is an icon labelled "Beam". Click this and make sure the box labelled "Allow incoming beams" is ticked. (Not sure about the exact wording but it is the only checkbox on the screen.)
And whilst we're on the subject of ticking boxes....
I'm pretty sure the two boxes under the FTP tab in the bluetooth setting need to be ticked aswell...Could there BE anymore boxes to tick for 1 simple operation?!
Similar Issues
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
jack_b_uta said:
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
Click to expand...
Click to collapse
This sounds like a problem with your laptop/dongle, if your kaiser is able to see other things...
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
kinktao said:
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
Click to expand...
Click to collapse
It's the same in Dutty's new ROM. The FTP tab is gone, and now I (and a few other people) can't send/receive via bluetooth.
Technical intervention is required here ...
I'm facing the exact same problem with my TyTn 2, but here are some spacifics that require an expert's opinion...
1. The device sends perfectly...
2. When it comes to recieving, here's the low-down:
-I tried sending a pairing req. from my computer (through my BT dongle) & the phone received the req.
-After the pair, the computer sent & the device received (no problem until now)...
-I tried sending another file (from my Nokia 6300) & there was no response from my phone...
-I tried sending from a Nokia 6260, the phone received without even the need to pair!!!
What I want to know is the technical reason for this to happen???
P.S.
Here are the options set on my device:
-Receive all incoming beams (Checked)
-Turn on BT (Checked)
-Make this device visible to other devices (Checked)
-Authentication (Passkey) required (Unchecked)
I think it would be a whole lot easier if you just packed your phone up and sent it to me. I would uh, take care of it for you.
Bluetooth beam fixed
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Thanks alot k101d for the quick response, but as I'm quite skeptical when it comes to messing around with my phone's internal configuration or registry files & so on, I would like to know the source from which you got the .CAB file, & what it exactly does (on the inside of course)...
Many thanks again, dude...
Oh, thanks a lot k101d.
Till today I was so dissapointed with this BT of mine (it costs about 100 €).
It worked !!!
Yo costas2by4AIO,
sorry if I'm gonna be bothering you, but bare with me & my desperate questions...
What exactly were you suffering (concerning BT) from before applying the .CAB file, & what was the result that satisfied you?
Hi Guys,
Need Help......
I am not able to beam more than one file altogether with my HTC tytn II
Please help me to figure out, How can I beam files altogether to other Bluetooth device instead of one by one.
Thanks,
k101d said:
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Click to expand...
Click to collapse
I can't download this .CAB file any more ........anyone could help?
Or any way to fix my bluetooth problem.
I can not send or receive file with another PPC or even my computer.........
Please someone help
I do have the same problem. I can't send or receive files (contacts, video, photo, music, ringtones) from other phones.
Already tried HTC patchs, but no solution at all.
Tried to download that file, but the link is not availlable. Can someone post the file again or have another solution ?
Hi People, I've been away from PDA's for while, realized the error of my ways and picked-up o2 Stellar at the weekend, the 2nd one in week. Before doing anything I installed WIN 6.1,everything appeared to working fine, until I tried to transfer files from my N95 to the stellar via bluetooth, every time I tried I got the same error 'unable to connect, I can pair with any phone tried 4 different phones today and I can send from my phone to another but can't receive files. I have double checked all my settings they seem to OK so I'm at a loss. Before I take it back for a 3rd has anyone else here had the same problem or know what I'm doing wrong.
Any help and advice would be much appreciated.
ROM details as follows
ROM Version 3.29.206.0.WWE
05/09/08
Radio Verson 25.83.40.02W
BlueTooth Verson 2.0/2.0+EDR
Windows Mobile 6.1 Pro.
plaver said:
Hi People, I've been away from PDA's for while, realized the error of my ways and picked-up o2 Stellar at the weekend, the 2nd one in week. Before doing anything I installed WIN 6.1,everything appeared to working fine, until I tried to transfer files from my N95 to the stellar via bluetooth, every time I tried I got the same error 'unable to connect, I can pair with any phone tried 4 different phones today and I can send from my phone to another but can't receive files. I have double checked all my settings they seem to OK so I'm at a loss. Before I take it back for a 3rd has anyone else here had the same problem or know what I'm doing wrong.
Any help and advice would be much appreciated.
ROM details as follows
ROM Version 3.29.206.0.WWE
05/09/08
Radio Verson 25.83.40.02W
BlueTooth Verson 2.0/2.0+EDR
Windows Mobile 6.1 Pro.
Click to expand...
Click to collapse
I had a similar problem with a bluetooth dongle.
Start/Settings/Connections/Beam/Recieve all incoming beams. Make sure BT filesharing is turned on the phone (if you fileshare), also make visible. BT can be spotty sometimes and these settings can be reset to default if the phone is reset.
nufsaid said:
I had a similar problem with a bluetooth dongle.
Start/Settings/Connections/Beam/Recieve all incoming beams. Make sure BT filesharing is turned on the phone (if you fileshare), also make visible. BT can be spotty sometimes and these settings can be reset to default if the phone is reset.
Click to expand...
Click to collapse
I forgot the setting 'Receive all incoming beams' now that has been set, everything is OK. Thanks
Had the same problem. Set to visible, receive all incoming beams etc. but I could only send, not receive. I solved the problem by activating Bluetooth Explorer and Activate File sharing. Strange since I didn't have this problem with WM 6.0 and BT Explorer deactivated.
Hi,
I have some problems with recieving files from e.g. a nokia phone via BT.
However i also see no posibilities of how to send files via BT.
In the e.g. Picture flow i select a file and use the letter to send. But only MMS options is a posibility.
If i go to the File Explorer and select it i also only have SMS/MMS settings.
The BlueTooth is ofcouse activated. And the Nokia phone can see my Diamond. But when trying to send it just fail?
HTC Diamond, Rom: 1.93.403.2 DAN.
On WM6 its not called sending via bluetooth, its called "Beaming".
So, use file explorer, then select your file and use "Beam File..." Has worked for me sending to Sony Ericsson phones and my VAIO laptop.
tada!
ok thats worked on sending a picture.
how can I send from inside touch flo?
and how about receiving from another phone?
don't think you can send via bluetooth from within touchflo. but if you want to receive a file via bluetooth then just make sure you have bluetooth and beam turned on in the communications manager. I'm pretty sure all of this is in the manual, wouldn't be any harm giving it a read?
I am running MDA Compact with Swiftblade's full 6.2 ROM and I have this problem. Yes I have read the manual. Bluetooth is on and device is visible. Beam is on. When I try to receive a file it fails. No error message appears on the screen of my MDA. I can send a file fine. Any ideas?
Neo Cortex said:
I am running MDA Compact with Swiftblade's full 6.2 ROM and I have this problem. Yes I have read the manual. Bluetooth is on and device is visible. Beam is on. When I try to receive a file it fails. No error message appears on the screen of my MDA. I can send a file fine. Any ideas?
Click to expand...
Click to collapse
Have the same problem...Any solutions? :S
Try turning OBEX on using Advanced Configuration Tool. If you do not want to use Advanced Configuration Tool, you can always turn it on using registry. Please soft reset after that.
programatix said:
Try turning OBEX on using Advanced Configuration Tool. If you do not want to use Advanced Configuration Tool, you can always turn it on using registry. Please soft reset after that.
Click to expand...
Click to collapse
I did enable OBEX mate and soft reset but still "Sending Failed" on the other side...
Any other solutions mates?..