i just flashed futureshock's WM6.1 that was done so turned my phone back on again but now he doesnt get further then the second splash screen.
i can only enter my phone via the BOOT screen. But cant load anything from the SD card.
So i cant use my phone anymore
Need some help really fast!
BREE100
IPL-0.90
SPL-1.09
panky88 said:
i just flashed futureshock's WM6.1 that was done so turned my phone back on again but now he doesnt get further then the second splash screen.
i can only enter my phone via the BOOT screen. But cant load anything from the SD card.
So i cant use my phone anymore
Need some help really fast!
BREE100
IPL-0.90
SPL-1.09
Click to expand...
Click to collapse
you can try
1. If you have hardspl -flash any other rom (YOU DONT HAVE)
2. Flash any shipped rom that matches your region/carrier(google for rom)
3. Send phone to service (Around 100 euro in my country)
4. Trash the phone / Read and learn before flasing again
BR
Have a nice TRASH
So my phone is ready for garbage?
panky88 said:
So my phone is ready for garbage?
Click to expand...
Click to collapse
not yet ! why not trying some different cid roms ? it could be help !
Hey been following the guide on how to restore to Stock just haveing Problems tried installing the HSPL v1.15 which i think is there version im ment to use living in the UK on O2(anyone can confirm would be appreciated) its showing up as 1.15.0000 fine in the bootloader screen and i installed stock OS, Just for some reason it boots up ok says Smart Mobility in White the all of a sudden that white writeing changes to a blue colour and all the colours from there on are messed up, untill i press the power button to put it in sleep and then bring it back the colours are then fine but it runs slow and the phone side of it doesnt allow me to turn it on, Also likes to restart randomly. Please help need to send it back on warrenty... Thanks alot for any help Dom
Another Update i just re installed the USPL 1.54 and its running perfect with stock OS. But i really need a solution on how to restore Stock SPL Thanks
DominicGood said:
Hey been following the guide on how to restore to Stock just haveing Problems tried installing the HSPL v1.15 which i think is there version im ment to use living in the UK on O2(anyone can confirm would be appreciated) its showing up as 1.15.0000 fine in the bootloader screen and i installed stock OS, Just for some reason it boots up ok says Smart Mobility in White the all of a sudden that white writeing changes to a blue colour and all the colours from there on are messed up, untill i press the power button to put it in sleep and then bring it back the colours are then fine but it runs slow and the phone side of it doesnt allow me to turn it on, Also likes to restart randomly. Please help need to send it back on warrenty... Thanks alot for any help Dom
Click to expand...
Click to collapse
DominicGood said:
Another Update i just re installed the USPL 1.54 and its running perfect with stock OS. But i really need a solution on how to restore Stock SPL Thanks
Click to expand...
Click to collapse
You say you are trying to install HSPL 1.15, I presume you mean SPL 1.15? The behaviour you describe about the blue/green screen indicates that you have the wrong SPL. What version is your stock ROM, because if USPL 1.54 runs fine with your device, perhaps your stock SPL is also higher than 1.15. I suggest that you try a few other SPL's, most likely to be 1.54. You can download this here
Plenty of threads already exist about returning to stock for warranty, as well as advice in wiki and bottom of first post in HSPL thread.
Future correspondence should be directed into that thread.
Thread closed
Hi all,
My xperia had the reboot problem. (after starting up windows mobile 6.1 it rebooted immediatly.
After that i installed the Ruu rom including SEX1 windows 6.5. My phone worked 4 about 2 weeks perfectly.
Now.. my phone starts rebooting again and i think a have to give it back to the shop for warranty (or does anybody else has other idea's?)
i have to install the stock ROM again ( http://forum.xda-developers.com/showthread.php?t=431218 ) but first i have to install the original OS.
Where can i find this?
by the way.. i also cant get into the rainbow screen...
what can i do?!
many thanks!
6.5 is not final dude, anything is possible with software thats not final, also 3rd party apps can cause issues.... if u are having no probs with the stock rom why not stick to the stock rom, try other roms to be sure first, dont just send back a phone because its rebooting after u changed the rom...see what the cause may be first
spikegotti said:
6.5 is not final dude, anything is possible with software thats not final, also 3rd party apps can cause issues.... if u are having no probs with the stock rom why not stick to the stock rom, try other roms to be sure first, dont just send back a phone because its rebooting after u changed the rom...see what the cause may be first
Click to expand...
Click to collapse
That was my first thought also but if you read it well you see that he couldn't get into tri collor screen.
you have to explain why you can't get in the rainbow screen doe it reboots? or wouldn't it just get in there. did try to press the volume down button and the power button at the same time?
look here for the originally roms http://forum.xda-developers.com/showthread.php?t=475482
but if you want to flash it you really got to get in the rainbow screen thats the only way to flash it.
Hi,
I just flashed Pdavietv 65.
After 10 minutes of using it, I locked the phone using the WM lock.
When i wanted to unlock it, the screen doesn't respond anymore.
I did a hard reset, I can't type anything on the screen, screen doesn't feel my fingers....
Anyone has an Idea?
I try to flash stock rom right now...
Sorry for my bad english
darkblue68 said:
Hi,
I just flashed Pdavietv 65.
After 10 minutes of using it, I locked the phone using the WM lock.
When i wanted to unlock it, the screen doesn't respond anymore.
I did a hard reset, I can't type anything on the screen, screen doesn't feel my fingers....
Anyone has an Idea?
I try to flash stock rom right now...
Sorry for my bad english
Click to expand...
Click to collapse
Flash another rom from the tri-color screen.
I just flashed the frenck Stock Rom From HTC.
I can't access.
When i 've the screen 'tap the screen to align screen', Nothing happens when i Touch the screen.
Only vol UP and down and power off are working....
Any solution?
Thanks
I think your digitizer unit died..get one one ebay and replace it
try fresh a stock rom which includes SPL as well.
mcdull said:
try fresh a stock rom which includes SPL as well.
Click to expand...
Click to collapse
You have a link please?
darkblue68 said:
You have a link please?
Click to expand...
Click to collapse
Try Putting your Phone in BootLoader mode.
Flash it with HARD SPL1.56
Then Try Installin a Fresh firmware again, a Hard Reset n it will be fixed.
I did all of this...
Nothing, I think I must send it to HTC...
I think your HD died touchscreen . You need to bring the HTC Service Center for repairs. If you is bought on ebay then there will pay for about 200 USD
My Touch HD just died
R.I.P. !
Damn all was working nice.
I did nothing.... Only flashed all days another rom
And when i wanted to call a friend yesterday,the screen didn(t respond anymore....
Grrr, I will send it to HTC this week, and i will by a Topaz One...
Leo is too big for my pocket....
ancola66 said:
I think your HD died touchscreen . You need to bring the HTC Service Center for repairs. If you is bought on ebay then there will pay for about 200 USD
Click to expand...
Click to collapse
DIY for 30 USD..ebay the spare part.
Had one same condition and fixed flashing with an original rom. Radio+Rom and Align screen on startup/\
I was in same condition as yours ,When in typped align scren nothing but after flash and a hard reset everything getback
Me, nothing after flshing original Stock ROM and originalHSPL.
But solething is very strange.
When the backlight power off (the dimmer), it comes back when i hit the screen... But i can't align the screen, the screen doesn't recognise my touch.
Why the dim is working when i hit the screen ans my gesture are not recognised?
Thanks a lot
Greats from France
It looks like only the alignment of the screen is wrong. Why it does not get fixed when flashing original ROM is strange. But the fact that the screen response to touch (returning from dim) should mean that the digitizer is OK.
Yes I think the digitizer is OK.
But I don't know what the problem is.
I will try to reflash tomorrow a custom Rom without align to screen at first boot....
Thanks
try mtty to completely erase ur internal memory..
then flash stock rom..
Ok, a few simple queries to help solve your issue. I'm assuming you used USPL or HSPL before flashing rom? and correct version of HSPL? Can you still access bootloader? What is your SPL?
If you can access bootloader, all is not lost and your device is not bricked.
I'd recommend flashing original stock rom onto your device and starting from fresh. Stock roms can be found in the wiki here. Once you have restored stock rom and if you still want a cooked rom, follow thisguide.
Let me know the answer to the above queries and how you get on.
Hi,
I used the SPL by Olinex.
Now i revert back to the original SPL.
When i enter in booloader mode, I can see: SPL-1.54.0000
Is this ok?
Before flashing the origal SPL i flashed the original French Stock ROM.
What is MMTY ?
Thanks
darkblue68 said:
Hi,
I used the SPL by Olinex.
Now i revert back to the original SPL.
When i enter in booloader mode, I can see: SPL-1.54.0000
Is this ok?
Before flashing the origal SPL i flashed the original French Stock ROM.
What is MMTY ?
Thanks
Click to expand...
Click to collapse
Solution should be found here including MTTY info & instructions. Same method for HD
Hi! I need some help to put back the original software on my X1. Last week i put a cooked ROM and made and Hard SPL on my X1 and now i want to turn back to the original software, can anyone help me please? Thanks!
I am also planning to upgrade my ROM.. so can pls anyone tell me If i upgrade to a new ROM.. how can I come bak to the factory default...
flashing is flashing
get the rom you want flash it
be it a newer or org rom you flash
but to go back you need to flash back there is no shadow org rom after you flash you can go back to you need to flash back to the org rom like you did when you changed to the rom you are using
Like Wise
I flashed my x1 with the energy rom. i decided to back to original fw, that failed. X1 wouldnt load it at all. so i thought to go back to energy rom. When i attempted to flash it back to energy but i get in bootloader it finds the image goes to a grey screen and says "loading......" and wont budge from this.
Any help please?
Or steer me in the right direction?...
P.S. ive tried hard reset