Related
I have the Diamond and really like it but it is so slow as we know. I've trawled round the site but am a total noob to this. I read about hardspl (i think) and flashing roms and advanced config....I just want to speed up the device and dont know where to start. I've turned off all the whistles and bells and the handset is on Orange with a 1.37 ROM. Tried installing the advanced config. but it told me I need a newer framework thingy and now the icon is stuck on the device and I just want to throw it at the wall. I know you guys are busy as hell and that a total noob just kinda gets in the way but could someone just tell me what I need, where I get it and where I put it on the damn phone If someone can I'll get the Mrs to make you tea
Sorry guys but I have tried but am not that techy minded
Hey dude, don't worry.
Check this site out - http://modmydiamond.info/
Read through the radio and rom installation guides carefully. It's very easy to follow and you will have upgraded in no time at all. As for which ROM, I use Swift bl v.6. It's very stable and quick and includes adv config in it anyway. But there are many so check out the rom section of this forum and see what people say, same goes for the radios. Installing a new rom will wipe the data on your Diamond, so it should get rid of that icon problem anyway mate.
I don't know why noobs get such a hard time, this site can be bewildering due to the vast info presented and some of us don't have the time to trawl through it all - espically as lots of it seems so advanced.
Anyway, good luck.
I'll try to make it simple as I can, because just over a month ago I was a noob in the same boat as you... So I know the learning curve is pretty steep, but once you start plodding up it, it does level out.
BUT before you go any further, read and understand all of this very useful check list here...
Also, it'll help to keep this list handy throughout the procedures.
So, keeping it simple, go for HardSPL 1.24 from here. Flash 1.24 by following the instructions in post #1 of that thread... follow these instructions to the letter mind, that is the key!
Once you have your HardSPL successfully flashed, go get ROM 1.93.405.1_WWE from here.
This file is self extracting, and automates the flashing process, so all you have to do is follow the instructions given as it leads you through, and if in doubt, just re-read the two sets of the instructions I've pointed out to you (everything you need is in there).
Do all that precisely as instructed, and you'll be all tooled up with the latest and quickest standard HTC ROM for a UK device... Like you, I was on a UK Orange .37 ROM, and I found a welcome increase in performance when I went to .93
Ps, don't be put off by the RUU utility when you get to the page where it looks as if it's trying to update your current main rom with your radio rom... just keep on going, it isn't touching the main rom provided it is flashing only a radio... you'll see what I mean when you get to that stage.
Pps, I'm going to say it again... make sure you backup any very important data you may have on your phone... and ultimately there are no absolute guarantees when flashing devices, and you will see it many times written on this site that you can only get flashy with your device if you're prepared to proceed on this basis.
Otherwise Enjoy
Edit; oops, didn't see you there simcarloc... that's what my post was meant to look like before I got too carried away.
Take a look ath the Diamond Rom forum there are very good guide and step by step guides
Thanks guys, I'm going to have a look at what you directed me to this morning. I run a forum for a car club and I know when people first join up it can be hugely daunting and a tad scary, even with the best intentions noobs can get freaked out somewhat....cue me
Thanks for putting this in "laymans" terms for me as I think that is what noobs need first off and we'll pick the rest of it up as we go along, its not laziness on our part, personally I just had head data overload and was losing the will to live I'll go look at the stuff you've posted and let you know how I get on.
Once again thanks for taking the time out to explain in a language I may just be able to get my head round Thanks guys.
One quick Q....runn diamond-sspl.bat? How and where is this?
Its not playing
Probably my fault but all I get is..
There is no application associated with "diamond-sspl" or whatever folder I try, it keeps telling me to run the app first, but I have no idea what I'm doing now. Also tells me the framework isn't present. No idea.
Guess I'll be sticking with a slow device Thanks anyway guys
Hey there LoudyMcLoud,
Like you I am somewhat of a noob too…
But since you have a problem I encountered before (framework issue) I might be able to help you out in this first stage.
My device kept giving the message that my Framework was not up to date when I wanted to install a program. I went to search for the latest framework version at MS, and found the latest (beta) release. I installed that, and then I got the message that my framework was a newer version then needed…. Ahhh help me god.
So I took the easy way out, a hard reset did the trick for me (press and hold volume down + centre button + the soft reset button located in the stylus opening)
Remember, this procedure too, will wipe all date from your device, it will restore itself to the way it was when you first bought it.
Maybe after this you can use the steps mentioned earlier in this thread.
Good luck with your Diamond.
Just install the latest .net framework from microsoft that is NOT the Beta version - can't remember the version number, but this worked for me.
Good job,... hope you will get the rest sorted
LoudyMcLoud said:
One quick Q....runn diamond-sspl.bat? How and where is this?
Click to expand...
Click to collapse
It's in the zip file you should have already downloaded here.
Extract all files in this zip file to their own folder, make an activesync connection with your diamond, then away you go. (For starters I recommend you choose HardSPL 1.24 when prompted.)
Latest .net is 3.5 available here.
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
deleted post
You need to check in the bootloader(tri-colored screen) what your spl is... In order to flash a custom rom it will need to say this SPL-0.72.01OliNex....if it does not say this then you need to hardspl the phone...if you follow the instructions it is easy. Once this is done then you will need this....copy the ROM you have downloaded into the CustomRUU folder and execute the file. If this does not work....you will need to format your memory card(Fat32) and follow these instructions, plus there is a video tutorial regarding all the procedures you need....the instructions are as basic as one can get.
Good luck.
Regards,
WC
Fructis said:
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
Click to expand...
Click to collapse
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
devalian said:
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
Click to expand...
Click to collapse
You mean that no person with a general knowledge about flashing rom = busting warranty shouldnt be allowed using a phone?
How do you know anything about what i do with the phone, with what apps im using, and what im using it for?
Mind your own business and come back to the thread when you have something to contribrute.
Fructis said:
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
Click to expand...
Click to collapse
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
the guides are pretty thorough...
if you read them its clear enough...
(assuming you want to use non official Sony roms - you need to flash your hardspl so you wont get errors... (think this is where you're stuck)...
download a hardspl and flash it via activesync)
Then
copy the rom into your sd card root directoy...
rename it to kovsimg.nbh
hit the reboot switch while holding down power and the down vol button to start the update process
this is the easiest way...
but as above, if you want shortcuts for everything and dont read the instuctions clear you MAY END UP BRICKING YOUR PHONE...
Gwystyl said:
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
Click to expand...
Click to collapse
I'ts a difference in writing a post with no meaning and a post like you just did.
Example: You start a new thread, no matter what it's about. There are two guys responding.
One guy is giving you this as a answer: Lol, thats kinda noobish that you dont know how to use your phone.
The second guy answers just like you did, you gave me information and links on where and what to search for. But still points out that theres many "obvious" stuff that im asking for.
Big difference.
Back to topic. I've already figured out how to do all, i have all the files that i need.
The problem is that when i try and update the SPL to 1.00.X1 instead of thje other 1.02.Olinex (or what its called) I always get a connetion error 262.
Ive read the links that you gave me before, and it says that you need to either softreset, change usb port or reboot your computer. Guys in another thread gives the same instructions.
Still no success.
So since i've done my searching, done the exact procedure that you should do. And it's still not working. Is that still something just "obvious" to ask for?
And i apologize if i hasn't been clear enough in this thread that the phone im using is a proto. And i still haven't been confirmed by some other proto user that this method is acctually working.
I'm thankfull for all the (helpfull) responses i get. And im trying them all.
If something else comes up i will post it in this thread. No matter if its obvious or not.
Have a nice day everyone!
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
CharlieSImon said:
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
Click to expand...
Click to collapse
haha, damn, thats obvious, that i didnt think of that before. hehe, thank you!
Btw, if the phone gets into the tricolor menu, and the progressbar shows up (but still stuck at 0%) can it still be because the driver?
Thanks
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
ryousuke said:
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
Click to expand...
Click to collapse
Oh, im sorry if i didnt expressed myself good enough.
When im using X1_HardSPL i get the 284 update error.
When in using the custom RUU i get the 262 error.
So i guess the X1_HardSPL application is to change SPL?
If i cant seem to change SPL i wont be able to change rom either. Correct?
Since i have the SPL that was shipped with the phone, can i still upgrade from R1A to R3A without changing SPL?
Have you disabled any of your firewall and anti virus programs when you try using the software?
I previously always had to disable my zonealarm firewall before I could uset he spl software....
Yes I've done.
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
lrammers said:
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
Click to expand...
Click to collapse
The Phone is still a Proto.....
Therefor not accepted by SEUS
Try flashing the official Sony Ericsson ROMs first. No need to Hard-spl for those.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
And if you try to flash via ActiveSync with CustomRUU? That worked most of the times with my X1. Oh wait, that got you the error 262.
In one of your other threads someone says (or you quoted) that one of the advantages of a proto was that there's no security check, which means it might not even be necessary to use HardSPL first.
I've had error 262 a few times; just try to flash again, maybe from another computer if that's possible. You can also try to flash another rom first.
Which roms have you tried flashing? Have you tried with a freshly formatted sd-card smaller than 2 gb (although I think that won't have any effect); you can also try renaming kovsimg.nbh with all small letters, all capitals or the way you just spelled it. It might be important.
offtopic: I get your point on the reactions you get when opening new threads. Everything is simple when you now where to look or if you've done it before, but it can be very hard to find the answer when there's so much info to choose from.
That said: a topic title of something like "having trouble flashig a custom rom to prototype" sounds a bit more serious then "need massive help" with a lot of exclamation marks. That might set people off on the wrong foot.
I am trying to get the cool 4 shortcut buttons and was directed to something called Cookies Home Tab. I installed it but no program showed up.
I would then try and uninstall it an install it again with sense deactivated, but when choosing uninstall on the program (which shows up on the "remove program" menu, but not in the start menu) the "busy-cursor" is just rotating and nothing happens. I tried powering off and try again, and the same thing happens: It says its uninstalling, but it takes forever and nothing happends.
Can someone help? How do I get the program properly installed. I am running a danish original rom and assumed it would be compatible when directed there. I am not sure where to find my sense version. Can it be that its 2.16xxxxx or is that windows?
came99 said:
I am trying to get the cool 4 shortcut buttons and was directed to something called Cookies Home Tab. I installed it but no program showed up.
I would then try and uninstall it an install it again with sense deactivated, but when choosing uninstall on the program (which shows up on the "remove program" menu, but not in the start menu) the "busy-cursor" is just rotating and nothing happens. I tried powering off and try again, and the same thing happens: It says its uninstalling, but it takes forever and nothing happends.
Can someone help? How do I get the program properly installed. I am running a danish original rom and assumed it would be compatible when directed there. I am not sure where to find my sense version. Can it be that its 2.16xxxxx or is that windows?
Click to expand...
Click to collapse
If you cannot find your manila version, or at least search on how to find it, you really need to learn more before you mess up your phone.
I assume you did a hard reset after your registry issue. If not I suggest you do as you will probably have to do it a few times as you attempt to customize your device.
Your manila version can be found in Settings\Device Info\Software Info.
Read the thread on Cookies Home tab for compatable versions and install instructions. Post your questions there.
p.s. Thanks for implying...
I am really sorry for sounding like a total noob, but I DID read the post, installation instructions and whats not. I also read the "how to find your manila version" which also said to go to settings tab - device info - software info. The thing is that its danish on my phone and I cant find anything called device info on my tab, only "about" which leads me to a webpage with a lot of copyright and legal mumble jumble.
When going to settings - advanced - about the device I get a tab called version, where it says Rom Version 2.16.403.1 (67041) dan. But I dont know if thats it.
But lord, how many original stock roms can there be? Its a pretty new phone and I installed every HTC update available to me. I must say that configuring this little diamond seems to take a rocket scientist or above. I can use a computer pretty well, but getting a little modifications to the HTC UI seems to take a phd
You seem like a nice guy, and I would like to learn. Maybe you can help me out so I dont have to ask so many noobish questions. I really tried to learn by myself but it is a new world to me and it is quite overwhelming.
1) I read that installing a rom is ireversible. Does that really mean that I under no circumstances can replace the original software? Is a cooked rom really a whole other OS and replace windows mobile 6.5 completely? Or is it just a modified windows?
2) What is the distinction between HTC Sense, Touch Flo and Manila, if any? As far as I read the black and white icons is manila and the colored ones is sense... Is that true? And does that mean that I cant use any programs that needs manila to run if I have the HTC Ui with the colored icons?
I hope the above questions helps me to a basic understanding, so I further on dont have to ask so many questions.
PS) after installing TD2 tools my screen rotation line in my system registry came back, and I got rid of the landscape.. Thats one problem solved. Call recording aswell. If I find a way to get these 4 shortcut-buttons available and set one of them to my to-do list I think Im done.. No more tampering.. I promise.
came99 said:
1) What exactly is the difference between installing Cookies Home tab and installing another rom? As I understand it, a rom is a whole other OS, where this software only is a skin? Correct?
Correct, The ROM is the whole OS, where CHT is a modification to the Sense (Manila) UI.
2) I read that installing a rom is ireversible. Does that really mean that I under no circumstances can replace the original software?
No, You must first install hard SPL to be able to flash a cooked(custom) ROM.
Once you install HSPL, your device is considered "out of warranty".
However you can reflash a Stock ROM and then reflash Stock SPL to return the phone to the factory state for warranty purposes. So it can be reverted.
3) What is the distinction between HTC Sense and Manila, if any?
They are one and the same, also referred to as Touch Flo 3D (TF3D)
4) The original question about getting Cookie to work, if someone feels like helping.
If you have installed Cookie's Home Tab and soft reset, when you are on your home screen you should see the flip clock (assuming that in Settings\System\Home\Items is set to HTC Sense), on top right of that is a little dash, this opens up additional panels for your shortcuts.
There should also be a new program possibly in settings or \Programs\Tools called CHTEditor to access your tab settings.
I suspect that it installed, you just didn't know how to access it.
Lemme know.
PS) after installing TD2 tools my screen rotation line in my system registry came back, and I got rid of the landscape.. Thats one problem solved. Call recording aswell. If I find a way to get these 4 shortcut-buttons available I think Im done.. No more tampering.. I promise.
Click to expand...
Click to collapse
See above for answers. One quick word of advice; If the program interfaces with your today screen, phone functions, etc. install to device memory and never to Storage Card. Programs that just tweak the registry and settings can be installed to SD card.
Uhm, and I wouldn't be promising anything because its addicting. Once you pop, you can't stop!
Sorry.. I edited my post while you were answering. I found the preguide to roms which was just about basic enough to enlighten me. Your answers helped a lot to, and everything fell into place.
I do think that I will stay away from flashing as it seems like risky business.. The option to hard-reset without to much hassle seems like the emergency brake I like available to me
At the moment I am trying to reinstall Cookies Home Tab, but the installation just hangs.. Probably because it wasnt uninstalled correctly. Any tips other than Hard Resetting which means several hours of setup
Edit: Ahh f... it.. I may aswell do it.. All the tampering made my phone slow anyway.. Now I know what I need and can get it to work without too much experimenting..
Thanks dude.
I did some research on your stock ROM and it looks like you are running Manila 2.1 which is the older version so many tweaks you are attempting may be for 2.5.
You would be better off changing ROMs.
Here is a download of our stock ROM for warranty purposes, keep it just in case. You may have to register for the site, but you may also find a nice cooked ROM in your language on that site. Dutty is a great chef and I use his ROMs because of their stability.
I can attempt to walk you through HSPL, but there have been many issues lately. Almost seems like the only way to get it to work is to "donate" to the developer.
Okay Mr Dope Pusher.. i see where you are going.. Telling me to stay away from these sheningans and 1 hour later you got me hooked anyway
Jokes aside.. Yes.. I Do think I am gonna need some help here.. While the stock backup rom is downloading I will try and find out for myself, but I would very much like some confirmation on what to do before I take the leap.. Stay tuned and thank you very much.. Your help is very appriciated.
I have a question though.. Now I downloaded the stock rom, but what if my phone breaks when Duttys Rom is installed.. Then I wont be able to reinstall the original rom before sending it in for repair. And then Im screwed warranty wise, right?
..., in anticipation of your next question;
As long as you have over 50% battery and do not interupt the flash (unplug the USB) there are very few chances of it bricking.
I have never had it happen and most errors are correctable with a hard reset. It really sounds worse than it is.
Most devices get bricked because the user attempts to flash a cooked ROM w/o HSPL or a ROM or radio from another device.
I have attached 3 files.
Do the following after you download these files;
1. Remove your SIM and SD card.
2. Sync your device to your PC through Active Sync or WMDC depending on your windows version.
2. Copy the enablenewrapi.cab to your device through file explorer and install
to device memory.
3. Open both the SPL 1.83 and the RUU zip files and place contents of both into a new folder.
4. Run the RUU.exe and you should see a progress screen appear.
5. With any luck, you won't get stuck at 0% and the flash will complete.
As the screen states, it may take up to 10 minutes. You will see your device disconnect from active sync, which is normal. Let it run until it completes and do not open anything or let your PC go into standby. Also, you may want to disable your AV and any firewalls as these can mess with the installation.
Make sure you have greater than 50% battery before you attempt this as any interuption during the flashing process can brick your device.
If the steps above complete, you can go into bootloader mode by holding down both volume keys right after you hit the soft reset buton, but before the device begins to boot. You may have to try a couple of times if you are not fast enough. Or you can power off the device then hold both volume keys and press the power button. In bootloader mode which is a tri colored screen, you should see SPL: 1.83.Olinex, then you will know it has installed correctly.
From this point, you are able to flash any cooked Topaz ROM.
The ROM flashing process is the same as HSPL in regards to placing the ROM's .nbh file into the same folder as the custom RUU.exe, so keep that RUU.exe file for future use.
You need only flash HSPL once to continue to flash as many ROMS as you like.
If you ever have to revert to stock, you would install the ROM you downloaded, then find the StockSPL file from the HSPL thread and follow the instructions.
Always hard reset after you flash a new ROM.
**If you are not successful in flashing HSPL, you will need to go to the HSPL thread and read up on opening a ticket with HTC Support, which will give you an autoinstaller that will work once you donate through the program. I believe they are asking for 4gbp.
Ok.. And one of the above files is the Dutty Rom? Edit: Oh I se.. It isnt.. I will download it then..
Will it look and feel similar to Sense, just with more features and customisation options?
You write: Most devices get bricked because the user attempts to flash a cooked ROM w/o HSPL or a ROM or radio from another device.
Can you please elaborate? I understand it like you need to make sure I install the hspl first before cooking, but "radio" from another device. Please explain it for a dummy as me, so I dont attempt to do it by accident.
came99 said:
Ok.. And one of the above files is the Dutty Rom? Is it available in danish as is, or do I have to do something.
Will it look and feel similar to Sense, just with more features and customization options?
Click to expand...
Click to collapse
No, I have not provided you with a ROM, just the HSPL unlocker.
You can go to HTCPedia and search for a Danish ROM with manila 2.5, or take a look through the ROM development thread and find one from another chef. It should have Sense installed but 2.5 unless it states otherwise. 2.5 has more features and functions and is the most current.
Many ROMs are multilanguage so I believe you select your region language when the ROM first loads. Just look for one that supports DAN. I use WWE (World Wide English) so I am not experienced with multilanguage variations.
Just make sure your HSPL is successful before you attempt to flash a ROM.
If you search hard enough you may even find a ROM with CHT cooked in which will alleviate you from having to install it yourself, but I suspect that your previous install didn't work because your on Sense 2.1
I have never used CHT, but use Max Manila Themes which is just a different mod, but I am thinking about trying CHT.
I'll take a look and see what I can find.
Regarding Radios;
A stock ROM comes with the OS and Radio ROM.
Most cooked ROMs take just the OS and tweak it for best performance, adding programs, removing other useless programs and do not include the radio ROM, therefore you will still have your stock Radio unless you flash a cooked ROM that has included the radio (usually denoted in the title of the ROM by the radio#, i.e. 4.49.25.57 (which is a Topaz radio version)
The only time you can brick is you attempt to install a radio from another device (sometimes they work better) such as a Blackstone radio to a Topaz device unless your SIM is unlocked or attempting to flash a Topaz radio w/o HSPL.
Personally, there are enough Topaz radios posted in the radio thread that I don't need my SIM unlocked to try others.
Symptoms of a problem radio are poor signal strength, rapid battery loss and your device heating up.
I have switched my radio ROM a few times but honestly haven't noticed a difference from my stock radio.
The stock ROM you downloaded would replace your Stock Radio if you happen to flash to a different one.
Your region and carrier are also a factor in choosing a radio, so again, just stick to stock unless you have issues.
Dude.. That radio thingie made me EXTREMELY paranoid and I see that there is dozens of different roms from dutty and thousands of rom in general where many of them seems to come with radio-thingies... I am extremely afraid of choosing something that will brick my system, so please, please help me through this, even though you already have been extremely helpful.
If I were on my own, I would go with this:
http://htcpedia.com/duttys_topaz_wm_leo_r_rtm_e11d19c3e22de899a/soft/htc-topaz-rom.html
But to be honest I dont know if it will work on my device or if I will be able to get it with a danish language pack..
Please help me choose the right one.... I am ready to rock, so I hope for a quick reply, and I promise I will do a extra good deed tomorrow to repay the world for all the help you gave me tonight.
came99 said:
Dude.. That radio thingie made me ETREMELY paranoid and I see that there is dozens of different roms from dutty and thousands of rom aswell where many of them seems to come with radio-thingies... I am extremely afraid of choosing something that will brick my system, so please, please help me through this, even though you already have been extremely helpful.
If I were on my own, I would go with this:
http://htcpedia.com/duttys_topaz_wm_leo_r_rtm_e11d19c3e22de899a/soft/htc-topaz-rom.html
But to be honest I dont know if it will work on my device or if I will be able to get it with a danish language pack..
Please help me choose the right one.... I am ready to rock, so I hope for a quick reply.
Click to expand...
Click to collapse
Don't sweat it Bro, if its posted as a Topaz ROM then its got the Topaz Radio, the only thing you risk is not being able to connect to certain 3G bands.
I've used Dutty's R-8 and its not a bad ROM, but its a little outdated and I didn't see that it had multi language support.
I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????
"I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????"
Then it aint just me being total clueless.. I cant find any either..
Im bafled by this world.. I basically have two modest demands: To record calls in mp3 and get easy access to my to-do list.. preferably on my homescreen, but just as good by one of the nifty Hotbuttons Ive seen in pictures..
To get those two modest demands fulfilled I either:
- Need to give up on my danish interface and crack my phone beyond warranty and a chance of bricking it.
- Disable HTC sense and go with WM interface
I know how limited I would be with any other phone, but this road I got myself on is really amazing
came99 said:
"I am really having a hard time locating a Danish language ROM.
I find FRE. GER, ITA, ESN, NLD, WWE, but no DAN????"
Then it aint just me being total clueless.. I cant find any either..
Im bafled by this world.. I basically have two modest demands: To record calls in mp3 and get easy access to my to-do list.. preferably on my homescreen, but just as good by one of the nifty Hotbuttons Ive seen in pictures..
To get those two modest demands fulfilled I either:
- Need to give up on my danish interface and crack my phone beyond warranty and a chance of bricking it.
- Disable HTC sense and go with WM interface
I know how limited I would be with any other phone, but this road I got myself on is really amazing
Click to expand...
Click to collapse
I found some Danish support threads, just search Danish Topaz in XDA and you may find something to load over a WWE rom.
Personnaly I think you will be disappointed if you do not take the plunge.
I had a Rhodium before my Topaz and once I go tmy Topaz, I couldn't stand it. It wouldn't do half the **** my Rhodium did. Because I had my Rhodium flashed to custom.
Finally HSPL was released and I flashed it immediately and can't believe I ever liked that other brick of a phone.
Take your time, get comfy with the process first, and read lots on the language packs.
The brick warning is just a disclaimer and it is very difficult to achieve if you follow the steps correctly.
I know these are expensive toys to take a chance on, but they really are only at 50% capacity out of the box. What a waste....
Bruce, dude, you're a saint. This is why so many folks look to xda for help. You should be commended, but probably won't be! You got my vote.
jdwilson said:
Bruce, dude, you're a saint. This is why so many folks look to xda for help. You should be commended, but probably won't be! You got my vote.
Click to expand...
Click to collapse
Thanks JD!
Is that commended or condemed???
Just trying to give a little back.
Greetz from SoCal.
I agree.. The helpfulnes here has been overwhelming, and has given me the bravery to try this out. But I am still very nervous.
Let me sum up what I learned from tonight.
1) When following your instructions I will have a phone which I can modify with custom roms.
2) As long as I am 100 % sure the rom is for Topaz I dont have to worry about messing up and bricking my phone due to doing wrong stuff to the radio-thingie? (yes, I still dont understand what that is)
3) I will be able to get back to factory defaults and warranty by installing the official rom you linked and afterwards install the original spl thingie afterwards?
4) Should I mess up and brick my phone, there is a fair chance of being able to restore it by the help of another device and a micro SD-card? (See I DO try and learn myself.. (Its probably incorrect though ))
5) I need to give up on the danish interface, but I will without too much hassle be able to get a danish keyboard?
6) To be absolutely sure not choosing a wrong ROM, please confirm this one as a possible choice: "Duttys Topaz HG R10 [5.2.23541.5.5.0]"
It is downloading and I am ready to take the leap... Geronimoooo!
came99 said:
I agree.. The helpfulnes here has been overwhelming, and has given me the bravery to try this out. But I am still very nervous.
Let me sum up what I learned from tonight.
1) When following your instructions I will have a phone which I can modify with custom roms.
Yes
2) As long as I am 100 % sure the rom is for Topaz I dont have to worry about messing up and bricking my phone due to doing wrong stuff to the radio-thingie? (yes, I still dont understand what that is)
Radio controls cell signal, GPS and WiFi connections.
3) I will be able to get back to factory defaults and warranty by installing the official rom you linked and afterwards install the original spl thingie afterwards?
Yes
4) Should I mess up and brick my phone, there is a fair chance of being able to restore it by the help of another device and a micro SD-card? (See I DO try and learn myself.. (Its probably incorrect though ))
Exactly.
5) I need to give up on the danish interface, but I will without too much hassle be able to get a danish keyboard?
Bingo!
6) To be absolutely sure not choosing a wrong ROM, please confirm this one as a possible choice: "Duttys Topaz HG R10 [5.2.23541.5.5.0]"
That's the one I am currently running. Great ROM!
It is downloading and I am ready to take the leap... Geronimoooo!
Click to expand...
Click to collapse
I'm usually not on the forum as much on the weekends but if you get stuck, shoot me a PM which will notify my e-mail and I'll see if I can help.
I take it you were successful with HSPL? If so, thats most of the battle!
Peace!
"5. With any luck, you won't get stuck at 0% and the flash will complete."
Well... Guess what...
Can someone please help.. Im stucked here and having a stroke.
Edit: Tried on 2 different computers and its the same: Stuck on 0 %.. Antivirus disabled.
using P3700 and Im trying to unlock it.
done with downgrading it to 1.40.OilNex and Ive already launched customruu.
(btw, what does it do? cuz I don't see any difference in my pda, eh. I mean customruu)
I've copied 'diamunlock.exe' to anywhere in my device but I don't know how to open it.
I guess, there's should be a pop-up or sth on my phone but I don't see anything. What should I do? Give me some hand guys. plz :')
using WM 6.5.1. 23089 WWE with htc sense 1921.
and have already put RadioROM.
(I don't know what they are though.)
I'm jus kinda putting all those stuffs in my pda cuz I don't have any idea.
I've googled a lot and read lots of instructions from you guys.
pls, help me
Sorry to say, mate, the best you can do is to start over in reading again:
http://forum.xda-developers.com/showthread.php?t=416211
You may want to check the wiki -pages as well:
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Be sure you understand the steps before applying otherwise you may brick your Diamond.
Good luck!
I just bought a used GSM factory touch pro 2 from a guy. It's been hacked with some sort of rom from XDA.
- Can someone please point me into the right direction to throw back on the stock wm 6.1 or 6.5 with TouchFlo3d.
I know NOTHING about this stuff as you can tell, but am willing to give it a shot to try and boot the stock rom back onto the phone (if that makes any sense).
If it helps. i already have 'co0kie's Home Tab Editor, which I don't know how to use/don't need. and I have total commander already on my phone.
thanks in advance for any help - I really do appreciate it. I've been wanting one of these phones since they came out last year and I just want the stock ROM ( boring, I know.. but I'm not confident enough with this kind of stuff).
Cheers
fisherman93 said:
I just bought a used GSM factory touch pro 2 from a guy. It's been hacked with some sort of rom from XDA.
- Can someone please point me into the right direction to throw back on the stock wm 6.1 or 6.5 with TouchFlo3d.
I know NOTHING about this stuff as you can tell, but am willing to give it a shot to try and boot the stock rom back onto the phone (if that makes any sense).
If it helps. i already have 'co0kie's Home Tab Editor, which I don't know how to use/don't need. and I have total commander already on my phone.
thanks in advance for any help - I really do appreciate it. I've been wanting one of these phones since they came out last year and I just want the stock ROM ( boring, I know.. but I'm not confident enough with this kind of stuff).
Cheers
Click to expand...
Click to collapse
Everyone has to start somewhere...
read this post: [Resources] Flashing your First GSM Rhodium Rom (For Noobs)
it is a sticky so will be at the top of this forum section.
Since you already have a custom rom and therefore hardSPL you just need to follow step 3. Dont worry about flashing a new radio (step 4) unless you want to.
Thanks mrj
I just found out that I have a SEA version of the phone after blindly luckily stumbling upon the sea version of htc's website for the stock ROM. I can't seem to sync the phone and windows mobile for my pc thought. But I will follow those steps you have laid out for me. Thanks again mrj
Cheers
Try a hard reset on your phone and reinstall the activesync software on the PC, otherwise you can try to flash via SD card (I think) I never actuallly tried it.
I always flash thru via sd card since i am on the go most of the time. You would have to go to HTC to get the stock rom for TP2 but if your looking for roms in specific country then have to check here in XDA or HTC. good luck with the search if you need info we can help