Related
I made a Custom rom but can't get it to flashe on my Breeze. I use de Special ruu listed in the wiki but when i start it the phone wil go off and won't go in to bootloder mode. Can some one outline step by step what to do. because i want to learn cocking. And when i master the cocking skills cocking a Wm6 rom.
I read the wiki so please step by step
I have the same truble, when i start flashing, the phone wil go off and won't go into bootloder mode(i did all that was in first post in theme "Htc Breeze Test Sspl"). I try to use HTC_Hermes_SIM_CID_Unlock_v3a but the same truble(i have the last HTC ROM; ipl 1.00; spl 1.10). sdamion, can you upload your Custom ROM somewhere i want to test it?
P.S. Please outline step by step manual(if i've done smth wrong).
Sergey55555 said:
I have the same truble, when i start flashing, the phone wil go off and won't go into bootloder mode(i did all that was in first post in theme "Htc Breeze Test Sspl"). I try to use HTC_Hermes_SIM_CID_Unlock_v3a but the same truble(i have the last HTC ROM; ipl 1.00; spl 1.10). sdamion, can you upload your Custom ROM somewhere i want to test it?
P.S. Please outline step by step manual(if i've done smth wrong).
Click to expand...
Click to collapse
I first want to test it my self i only have the dutch mui files and removed al MSN live stuf en the streaming media. But before i can upload it i want to test it myself.
go to this treat http://forum.xda-developers.com/showthread.php?t=306165. I get the spl by des so i will try flashing my custom rom
Format a fresh microSD card, copy on the rom you want to test (best just ROM only!) and rename to breeimg.nbh, start the SSPL variant posted in this forum and then quickly enter bootloader (power/camera).
Works a treat, as stated in post 5 of the thread you quoted. I've flashed umpteen Cavalier Rom variants this way, all followed by the inevitable re-flash back to 1.34
darrellr said:
Format a fresh microSD card, copy on the rom you want to test (best just ROM only!) and rename to breeimg.nbh, start the SSPL variant posted in this forum and then quickly enter bootloader (power/camera).
Works a treat, as stated in post 5 of the thread you quoted. I've flashed umpteen Cavalier Rom variants this way, all followed by the inevitable re-flash back to 1.34
Click to expand...
Click to collapse
It works now i am runing a rom without streaming media and Clear vue word powerpoint pdf reader. But i cant edit the register. I can't convert my default.reg and user.reg to a .hv file. So the files are deleted but the registry entries are still there. So im playing around
Finally got the time to have a fiddle around and found an alternative, but probably slower, approach to the SDcard route.
Basically instead of the standard RomUpdateUtility.exe that comes with the 1.34 package I used the modified Hermes flasher RUUwrapper and chose the force SSPL option.
Once the Breeze is in SSPL (execute SPL shortcut file + press power/camera IMMEDIANTLY) it is possible to run the RUUWrapper on my laptop and it will flash whatever signed/unsigned nbh file that is local to it.
i just installed this and my phone rebooted, whats the next step to getting HTC Rom on my phone?
also, how do i install .cabs? where do i upload them
ive read the stickies and wiki but its all confusing, can someone just explain it in laymans terms
All HardSPL does is unlock the ROM portion of your phone so that you can load new ones from any provider. Now you have to download the ROM that you want to load, and follow the instructions.
As far as getting cabs onto your phone, there are a lot of ways to do it, but the easiest is to connect to ActiveSync, Click the Explore button on the ActiveSync window, and copy the cabs someplace where you can easily find them (I put them in the root of my Storage Card). Then open File Explorer on your phone, navigate to that directory, and tap the cab. That will start the installer.
If you're having this much trouble doing this, though, I'd advise against loading a custom ROM and things of that nature. While it's possible to recover from a mistake, it might be beyond your proficiency level.
If you are asking how to install a CAB, IMHO, you should not be trying to flash your ROM.
A CAB is like a setup.exe on windows. Just copy the file to your device and open it to start the install process.
Seriously, I know it is hard figuring out all the info, and I don't even claim to know as much as I should after doing several ROM flashes on 3 different devices, but I do know it is possible to get you phone into an unusuable state for which none of the sellers will provide support for. Basically, you are on your own, and I can sya you will be hard pressed to get help without learing the ropes like the people in the know had to do. So basically, keep reading...
Try these sections...
http://forum.xda-developers.com/forumdisplay.php?f=259
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes (the hermes was one of the best selling and most upgraded of the HTC devices so there is a lot to be learned from it)
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners
If it doesn't make sense, learn some more and reread them when you have more context to fill in the gaps.
Hope this helps
This is for ne one that is looking for detail in making their Wing/Herald hard spl'd
Please do not get mad at me if it does not work.. But there are a ton of success stories with flashing Wing/Herald to Hard SPL..
#1:
Ok first check your ipl and spl.. You can do this by entering bootloader. bootloader (push the pin hole right under volume slide and hold camera button) you will then enter bootloader.. It looks like 3 color bars and say's ipl 4.xxxxx whatever and spl 4.xxxxx same.. Whatever the 4.xxx is thats what ipl and spl you are.. In order to become hard spl you must at least 4. and higher.. So if you see a 4 then your good..
#2:
Ok now that we have checked, soft reset your phone again and let it load.. This will get you out of bootloader and back to normal mode.. I was very careful on flashing.. So i always reverted back to oem rom.. So get the oem Wing rom or Herald rom.. If you can't find it let me know because i have it.. So just flash oem and let it be stock rom..
#3:
Ok now is getting ready to start from the very beginning.. Now if you have the 3 cabs (canonyang.cab, aserpolicy.cab, disablesecurity.cab) just install them in order as writen . After they were successfully installed soft rest your phone again..
#4:
Ok now we start the flash.. Its a scary few moments lol.. But very worth it.. Make sure you are synced and connected to your comp.. I also was extra careful by resetting my comp and making sure all windows were closed and made it so windows weren't open.. But i was extra careful Check the circle and make sure its green or if you have vista it'll be the pda icon lite up.. now open your hard spl folder (the rar. or folder that you dl'd for from the main page) and click on ROMUpdateUtility. Now just wait for it to finish the flash.
- If all goes well then it will come up something like Yang something something.. You will see a dif splash due to you dl'ing a new rom that makes your phone hard spl'd. Let it finish and your good.. Soft reset and enter bootloader and see if spl is 4.70 yang.. If so congrats your hard spl'd!!!!!! fo sho...
* Now to flash other roms all you have to do is get your oem rom and right click on it.. Extract it and you will see its contents.. Among its contents delete the spl.nbh file. Not the ruu.nbh.. Now you click romupdateutility.. I would make the extracted oem a special folder because this is now your new flashcenter.. Ne time you would like to flash a new rom all you have to do is simply replace the rom .nbh of your liking in this folder that you made and run romupdate.. All done.. Easy flashing.. lol.. Welcome to hard spl world!!! Now you can flash at ease.. Ne Herald/ Wing rom you have is now flashable except roms designed for micro sd cards (trasflash cards) Just use the .nbh files..
Please if you are are not ok with my instructions and wish special help(detailed help) with this put it on this thread. Others will learn from others concerns.. Even if the ? has been asked a million times still ask.. Please ask ?'s before flashing if something does not go with instructions..
Once again i'm not responsible for ne thing that happens to your wing/herald.. I am simply trying to help in-detail and be at assistance in ne way possible..
This is the dl from the orginal Hard SPL page. It contains everything thing you need.. (cab. files, .nbh for flahsing and romutility for flashing)
Give credit to Papamopps's for starting the Hard SPL thread
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
This is the oem tmobile rom update:
http://rapidshare.com/files/148795008/TMo_Wing_RUU_Update_4.26.531.4.exe
Good manual! thanks!
ruebyi said:
Good manual! thanks!
Click to expand...
Click to collapse
no problem.. i had a friend in a dif thread needing help with hard spl and was looking for detail.. so here it is.. plus ill be as much support as i can be.
trust me if you follow those steps it will work and you will be on your way to great things
I have a question, I hard spl'd my wing before but since than I got another one since it broke. Do I have to install the cab files in a special order? It seems that I remember doing this in a special order before. I hope I did not over look this question in your thread. Good post by the way.
lmyers10 said:
I have a question, I hard spl'd my wing before but since than I got another one since it broke. Do I have to install the cab files in a special order? It seems that I remember doing this in a special order before. I hope I did not over look this question in your thread. Good post by the way.
Click to expand...
Click to collapse
On the original thread there is a specific order.. canonyang.cab, aserpolicy.cab, disablesecurity.cab.. I had a second wing and did not fallow this order.. i just did it from bottom to top in alphabetical order. i kinda didnt care with the second wing thou.. i would do as the first theard says.. i totally forgot that there is an order.. i will edit.. thanks..
iPhone iWing said:
On the original thread there is a specific order.. canonyang.cab, aserpolicy.cab, disablesecurity.cab.. I had a second wing and did not fallow this order.. i just did it from bottom to top in alphabetical order. i kinda didnt care with the second wing thou.. i would do as the first theard says.. i totally forgot that there is an order.. i will edit.. thanks..
Click to expand...
Click to collapse
I wasnt busting your chops ,just wanted to make sure I remembered right. I will be using your directions as a guideline as I am getting ready to hard spl my phone again.
lmyers10 said:
I wasnt busting your chops ,just wanted to make sure I remembered right. I will be using your directions as a guideline as I am getting ready to hard spl my phone again.
Click to expand...
Click to collapse
O no man i wasn't coming close to taking it like that.. It was a big reminder!! Thank you.. Like i said thou i didnt do them in order on my other wing and it worked without a prob.. But do as recommended now.. I put that they need to be in the order i have posted.. Thanks.. I hope your hard spl goes great!!!
fo_sho..
thanks these are great instruction.and i believe anybody should b able to hard spl afer reading these directions...but hey who knows
Thanks it worked perfect
Ditto here. Thank you very, very much. Good instructions!
One little thing: "aserpolicy.cab" is actually "ASerg Policies.CAB" and "disablesecurity.cab" is "Disable_Security.cab" in the OEM ROM you provided a link to.
I just got a used Wing off Ebay. My IPL is 4.10.0002 and my SPL is 4.10.0000 and when I try to HardSPL I get to where the progress bar is but then it says it can't communicate with my PDA/PHone and dies on me.
I installed the CAB files in the order stated then soft reset then ran the ROM UPdate Utility. ActiveSync is active but it says it can't communicate. Did I do something wrong?
Thanks for any help.
*** Edit*** Got this figured out. I needed to go to Settings->Connections->USB to PC and check the box for Advanced Communications then run the ROM Update Utility
Lance
I followed these instructions perfectly, I got the new "yang" splash, I checked the bootloader and it confirms the spl is 4.70 yang but when i soft reset to get out of the bootloader and try to start the phone up it says:
"Error-Device start up failed due to sudden loss of power. Please click Yes or No to continue."
But there wasnt a power loss, and it wont let me click yes or no. Anyone know what happened and what I should do?
EDIT: Never mind, I got it fixed.
chaotic646 said:
I followed these instructions perfectly, I got the new "yang" splash, I checked the bootloader and it confirms the spl is 4.70 yang but when i soft reset to get out of the bootloader and try to start the phone up it says:
"Error-Device start up failed due to sudden loss of power. Please click Yes or No to continue."
But there wasnt a power loss, and it wont let me click yes or no. Anyone know what happened and what I should do?
EDIT: Never mind, I got it fixed.
Click to expand...
Click to collapse
Maybe post how in case this happens to someone else?
iPhone iWing said:
This is for ne one that is looking for detail in making their Wing/Herald hard spl'd
Please do not get mad at me if it does not work.. But there are a ton of success stories with flashing Wing/Herald to Hard SPL..
#1:
Ok first check your ipl and spl.. You can do this by entering bootloader. bootloader (push the pin hole right under volume slide and hold camera button) you will then enter bootloader.. It looks like 3 color bars and say's ipl 4.xxxxx whatever and spl 4.xxxxx same.. Whatever the 4.xxx is thats what ipl and spl you are.. In order to become hard spl you must at least 4. and higher.. So if you see a 4 then your good..
#2:
Ok now that we have checked, soft reset your phone again and let it load.. This will get you out of bootloader and back to normal mode.. I was very careful on flashing.. So i always reverted back to oem rom.. So get the oem Wing rom or Herald rom.. If you can't find it let me know because i have it.. So just flash oem and let it be stock rom..
#3:
Ok now is getting ready to start from the very beginning.. Now if you have the 3 cabs (canonyang.cab, aserpolicy.cab, disablesecurity.cab) just install them in order as writen . After they were successfully installed soft rest your phone again..
#4:
Ok now we start the flash.. Its a scary few moments lol.. But very worth it.. Make sure you are synced and connected to your comp.. I also was extra careful by resetting my comp and making sure all windows were closed and made it so windows weren't open.. But i was extra careful Check the circle and make sure its green or if you have vista it'll be the pda icon lite up.. now open your hard spl folder (the rar. or folder that you dl'd for from the main page) and click on ROMUpdateUtility. Now just wait for it to finish the flash.
- If all goes well then it will come up something like Yang something something.. You will see a dif splash due to you dl'ing a new rom that makes your phone hard spl'd. Let it finish and your good.. Soft reset and enter bootloader and see if spl is 4.70 yang.. If so congrats your hard spl'd!!!!!! fo sho...
* Now to flash other roms all you have to do is get your oem rom and right click on it.. Extract it and you will see its contents.. Among its contents delete the spl.nbh file. Not the ruu.nbh.. Now you click romupdateutility.. I would make the extracted oem a special folder because this is now your new flashcenter.. Ne time you would like to flash a new rom all you have to do is simply replace the rom .nbh of your liking in this folder that you made and run romupdate.. All done.. Easy flashing.. lol.. Welcome to hard spl world!!! Now you can flash at ease.. Ne Herald/ Wing rom you have is now flashable except roms designed for micro sd cards (trasflash cards) Just use the .nbh files..
Please if you are are not ok with my instructions and wish special help(detailed help) with this put it on this thread. Others will learn from others concerns.. Even if the ? has been asked a million times still ask.. Please ask ?'s before flashing if something does not go with instructions..
Once again i'm not responsible for ne thing that happens to your wing/herald.. I am simply trying to help in-detail and be at assistance in ne way possible..
This is the dl from the orginal Hard SPL page. It contains everything thing you need.. (cab. files, .nbh for flahsing and romutility for flashing)
Give credit to Papamopps's for starting the Hard SPL thread
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
This is the oem tmobile rom update:
http://rapidshare.com/files/148795008/TMo_Wing_RUU_Update_4.26.531.4.exe
Click to expand...
Click to collapse
Awesome. I was worried about doing this because everything seemed out of date and etc on here but I figured the hell with it, it's been months and so many hours this week and it worked. Thanks. I was a little worried about the spl because it looked like an older version and said wm6 and not 6.1. Well everything worked out great, thanks for this. After hours and days of reading every thing I could, this was the only that did not leave me with too many unanswered questions making me worried about doing this.
*UPDATE* So I I did another one today (or tried) and kept getting that 260 error and don't know why yet (I know; it is some place in the forums) and after having it do it about 5 times I checked (unlike you said to) and it never updated the spl etc I was in a hurry but I don't think the error was my fault. But now I have a question: What exactly are the 3 cab files for? At first I thought that was what did the hard spl but then after doing it and reading this again (I learn by doing not reading) I realizied it is not. And second question is: Why does it have to be flashed with that ROM to hard spl it?
apathetic said:
Maybe post how in case this happens to someone else?
Click to expand...
Click to collapse
It did allow me to click yes, I was just trying to touch the yes with my stylus but I had to click the left soft key. I dont know what caused the error but it seems to be working fine now and Ive successfully flashed 4 different roms.
chaotic646 said:
It did allow me to click yes, I was just trying to touch the yes with my stylus but I had to click the left soft key. I dont know what caused the error but it seems to be working fine now and Ive successfully flashed 4 different roms.
Click to expand...
Click to collapse
Oh ok. I did 3 today and still did not see that (tg)
Hi!
Thanks for all the explanations.
My IPL is 4.18.0002 and SPL4.18.0000.
My phone is locked by a brazilian cell commpany TIM. Do I need to unlock my herald before to do a hard spl?
Thanks in advance
Gorbo
Hi Gordo, I am from Porto Alegre too and I hard-spled ok here.
You dont need to unlock before to do a hard spl.
Thanks.
apathetic said:
Maybe post how in case this happens to someone else?
Click to expand...
Click to collapse
I have done the same yesterday ... the thing was I've forgot the storage card in the phone. There was mess of previous installation (mostly WM5). Today I've made clear installation of the official WM6 with the card out of slot. It is working perfect now.
ive downloaded the file
and tried to run the program
my phone gets stuck at 0% and vista is saying i can remove the device at anytime
can someone help please?
Assuming you have done hard-spl, try the following method. Works all the time for me.
http://forum.xda-developers.com/showthread.php?t=445662
wolver1ne said:
Assuming you have done hard-spl, try the following method. Works all the time for me.
http://forum.xda-developers.com/showthread.php?t=445662
Click to expand...
Click to collapse
i had a quick glance at that and started to read the hard-spl. i dont think its for me. im totally thick and it looks bloody complicated
i *seem* to have it working i downloaded a hardspl file first which flashed no probs
now the proper rom seems to be uploading
It's not at all complicated. If you follow the steps really closely, hardly anything can go wrong. The only problem lies in Vista being a ***** with these things sometimes. With hardSPL installed, you should have no problem at all.
Btw, you can edit your post with the "edit" button. Better than doubleposting.
DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave