Related
I have just flashed from Duttys 2.7 to 3.0 using the process where you switch on the phone holding down VolDwn key and flashing with the nbh file on the storage card. All went ok but once I hard reset it loads with what looks like a broken 16bit colour scheme.
I am a lil bit worried now... what have I done? Have I done something wrong? It was working before the flash.... not sure if any further info required so please let me know if you need more details from me. Will be sat watching thread to respond asap.
Thanks
Jody
J7ody said:
I have just flashed from Duttys 2.7 to 3.0 using the process where you switch on the phone holding down VolDwn key and flashing with the nbh file on the storage card. All went ok but once I hard reset it loads with what looks like a broken 16bit colour scheme.
I am a lil bit worried now... what have I done? Have I done something wrong? It was working before the flash.... not sure if any further info required so please let me know if you need more details from me. Will be sat watching thread to respond asap.
Thanks
Jody
Click to expand...
Click to collapse
run uspl 2.5 & flash spl 1.54 again
J7ody said:
I have just flashed from Duttys 2.7 to 3.0 using the process where you switch on the phone holding down VolDwn key and flashing with the nbh file on the storage card. All went ok but once I hard reset it loads with what looks like a broken 16bit colour scheme.
I am a lil bit worried now... what have I done? Have I done something wrong? It was working before the flash.... not sure if any further info required so please let me know if you need more details from me. Will be sat watching thread to respond asap.
Thanks
Jody
Click to expand...
Click to collapse
USPL isn't permanent like HSPL so to flash any rom or radio you will always need to run USPL first. Thats your problem!!
You'll need to use USPL and flash SPL 1.54 again then reuse USPL again before flashing Duttys
Thanks for the super quick response am getting everything downloaded as we speak and will give it a go.
Cheers, hopefully my panic will be shortlived
J7ody said:
Thanks for the super quick response am getting everything downloaded as we speak and will give it a go.
Cheers, hopefully my panic will be shortlived
Click to expand...
Click to collapse
Good luck mate, keep us informed on your progress so we can guide you should you get stuck, which hopefully you won't!!
Will do, will be a bit later though as phone keeps restarting so dont have long enough to drag files to storage card. Will await getting home where i have card reader
I suffered something similar...make sure you read the post about flashing to anything based on 1.56roms (it's a sticky at the top I think)....it helped me hugely, and the steps are crystal clear.
I have said it before and I'll say it again.... this site is a life saver. Followed step by steps from the guide to 1.56 installs (what I should have done in the first place) and all is working.... thank god.
Only problem I hit was for love nor money could I get uspl to see device on Vista 64bit, had to wait until I got back into work to run in it on an XP machine and all went through first time as it should
Jody
J7ody said:
I have said it before and I'll say it again.... this site is a life saver. Followed step by steps from the guide to 1.56 installs (what I should have done in the first place) and all is working.... thank god.
Only problem I hit was for love nor money could I get uspl to see device on Vista 64bit, had to wait until I got back into work to run in it on an XP machine and all went through first time as it should
Jody
Click to expand...
Click to collapse
You probably needed to update drivers on vista for USPL to work
Hi,
Although this is my first post, I have been lurking for many years.
I have successfully flashed a Kaiser and a Diamond in the past so I feel reasonably confident.
However, I am having real problems with my blackstone. I have followed the instructions until point 5, when I enter bootloader it is showing 1.14000 etc - I then try to follow the rest of the instructions. It will go into the rom updater utility, the screen will go grey and show 0% but then nothing happens and I eventually have to go into recovery.
Any ideas?
Thanks
Caroline
cazlol said:
Hi,
Although this is my first post, I have been lurking for many years.
I have successfully flashed a Kaiser and a Diamond in the past so I feel reasonably confident.
However, I am having real problems with my blackstone. I have followed the instructions until point 5, when I enter bootloader it is showing 1.14000 etc - I then try to follow the rest of the instructions. It will go into the rom updater utility, the screen will go grey and show 0% but then nothing happens and I eventually have to go into recovery.
Any ideas?
Thanks
Caroline
Click to expand...
Click to collapse
Sounds like you haven't installed either HSPL or USPL before trying to flash rom.
I'd recommend going down the HSPL route. (Latest HSPL can be found in my signature). Once downloaded flash to phone then you are ready to flash to cooked roms
Hi,
Thanks for replying. I just tried that and have the same problem.
What have I done wrong??
Caroline
cazlol said:
Hi,
Thanks for replying. I just tried that and have the same problem.
What have I done wrong??
Caroline
Click to expand...
Click to collapse
Go into bootloader. If it says 1.14.0000 you are ready to go to step (5c). When you connect usb cable to pc does the text at bottom change from 'serial' to 'USB'?
Possible problems could be:
1. You haven't disabled anti-virus
2. Drivers on you pc need updated. Download step (1g) and go to (0).
If USPL is successful it should state SPL v 1.15.USPL in bootloader. If HSPL is successful it should state SPL v 1.15 OliNex
Hi,
Well after much swearing at both computer and phone, I managed to get the drivers updated. Many thanks Spartan, it seems that this was the problem as I am flashing Dutty's ROM right now.
Thanks for your help.
Caroline
cazlol said:
Hi,
Well after much swearing at both computer and phone, I managed to get the drivers updated. Many thanks Spartan, it seems that this was the problem as I am flashing Dutty's ROM right now.
Thanks for your help.
Caroline
Click to expand...
Click to collapse
No prob's, just glad you got it sorted
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
deleted post
You need to check in the bootloader(tri-colored screen) what your spl is... In order to flash a custom rom it will need to say this SPL-0.72.01OliNex....if it does not say this then you need to hardspl the phone...if you follow the instructions it is easy. Once this is done then you will need this....copy the ROM you have downloaded into the CustomRUU folder and execute the file. If this does not work....you will need to format your memory card(Fat32) and follow these instructions, plus there is a video tutorial regarding all the procedures you need....the instructions are as basic as one can get.
Good luck.
Regards,
WC
Fructis said:
Hello!
In my previous post i asked for the best ROM for the X1, ive already downloaded the image file for a ROM called "EnergyROM_KOVSKY_20090805_Standard".
Now i just want to know how to Apply it to the phone.
What do i need to change in the phone before installing the ROM?
Is it even possible to change ROM in a prototype?
I also have problems updating my ROM (when i tried it before)...RUU gives me error code 262.
AS you may notice, im really retarded when it comes to this, but hopefully i will learn sometime.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017
And please: Dont redirect me to some multi thread that is named "How to flash your phone) Cause ive already tried it, but i dont understand **** there
If someone would be kind enough to give me a step by step walkthrough on how i do to upgrade just that ROM that ive downloaded. And what other programs i need to be able to fix my phone.
Thanks in advance!
Click to expand...
Click to collapse
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
devalian said:
a noob with a professional phone?
know nothing but using a prototype phone.. lols...
Click to expand...
Click to collapse
You mean that no person with a general knowledge about flashing rom = busting warranty shouldnt be allowed using a phone?
How do you know anything about what i do with the phone, with what apps im using, and what im using it for?
Mind your own business and come back to the thread when you have something to contribrute.
Fructis said:
Thanks for the first good reply...Onfortunatly when i try and update it just say update error 284...
Click to expand...
Click to collapse
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
the guides are pretty thorough...
if you read them its clear enough...
(assuming you want to use non official Sony roms - you need to flash your hardspl so you wont get errors... (think this is where you're stuck)...
download a hardspl and flash it via activesync)
Then
copy the rom into your sd card root directoy...
rename it to kovsimg.nbh
hit the reboot switch while holding down power and the down vol button to start the update process
this is the easiest way...
but as above, if you want shortcuts for everything and dont read the instuctions clear you MAY END UP BRICKING YOUR PHONE...
Gwystyl said:
There's a list of error messages here somewhere. Maybe you can find it here. I think the answer is here. It sais just try again after turning off and turning it back on again
btw, being rude to other users isn't going to help you get your questions answered any faster. Updating roms isn't that hard anymore, but you need to be carefull and know what you're doing. If you don't understand how flashing works and what you need to do for that, you can read the stickies in this rom section. I think it's explained very clearly and step by step lots of times.
edit: looking at all your posts, it seems you've asked the same about three times, and most things kan be found easily by google or the xda forum search. Maybe try a bit harder before asking here?
if you don't like criticism, just ignore my post; everybody has to learn to work with windows mobile, but the only way is to try a lot yourself, search, try some more, search again, then ask and try some of the answers given. Don't get agitated when not everyone is giving you the right answer in clear steps, most of the users are trying to explain as good as they can with the information provided.
Click to expand...
Click to collapse
I'ts a difference in writing a post with no meaning and a post like you just did.
Example: You start a new thread, no matter what it's about. There are two guys responding.
One guy is giving you this as a answer: Lol, thats kinda noobish that you dont know how to use your phone.
The second guy answers just like you did, you gave me information and links on where and what to search for. But still points out that theres many "obvious" stuff that im asking for.
Big difference.
Back to topic. I've already figured out how to do all, i have all the files that i need.
The problem is that when i try and update the SPL to 1.00.X1 instead of thje other 1.02.Olinex (or what its called) I always get a connetion error 262.
Ive read the links that you gave me before, and it says that you need to either softreset, change usb port or reboot your computer. Guys in another thread gives the same instructions.
Still no success.
So since i've done my searching, done the exact procedure that you should do. And it's still not working. Is that still something just "obvious" to ask for?
And i apologize if i hasn't been clear enough in this thread that the phone im using is a proto. And i still haven't been confirmed by some other proto user that this method is acctually working.
I'm thankfull for all the (helpfull) responses i get. And im trying them all.
If something else comes up i will post it in this thread. No matter if its obvious or not.
Have a nice day everyone!
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
CharlieSImon said:
Looks like there's a connection error when your phone reboots to go into tri-color boot menu.
Google for USB Mass storage device, download the driver and install it and then try again.
Of course you have to find the right driver for your OS.
Click to expand...
Click to collapse
haha, damn, thats obvious, that i didnt think of that before. hehe, thank you!
Btw, if the phone gets into the tricolor menu, and the progressbar shows up (but still stuck at 0%) can it still be because the driver?
Thanks
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
ryousuke said:
if its stuck at 0% it means you're not flashing a compatible rom...
obviously you havent flashed the spl...
flash a OFFICIAL sony rom first... if you still have issues at least you know its either the 'prototype' hardware
or your PC...
which i'd suggest try flashing from another PC...
Click to expand...
Click to collapse
Oh, im sorry if i didnt expressed myself good enough.
When im using X1_HardSPL i get the 284 update error.
When in using the custom RUU i get the 262 error.
So i guess the X1_HardSPL application is to change SPL?
If i cant seem to change SPL i wont be able to change rom either. Correct?
Since i have the SPL that was shipped with the phone, can i still upgrade from R1A to R3A without changing SPL?
Have you disabled any of your firewall and anti virus programs when you try using the software?
I previously always had to disable my zonealarm firewall before I could uset he spl software....
Yes I've done.
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
lrammers said:
yes if you have the stock SPL you can upgrade from R1a to R3a with the standard SE update utility.
which can be downloaded at the SE site under support.
Click to expand...
Click to collapse
The Phone is still a Proto.....
Therefor not accepted by SEUS
Try flashing the official Sony Ericsson ROMs first. No need to Hard-spl for those.
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
And if you try to flash via ActiveSync with CustomRUU? That worked most of the times with my X1. Oh wait, that got you the error 262.
In one of your other threads someone says (or you quoted) that one of the advantages of a proto was that there's no security check, which means it might not even be necessary to use HardSPL first.
I've had error 262 a few times; just try to flash again, maybe from another computer if that's possible. You can also try to flash another rom first.
Which roms have you tried flashing? Have you tried with a freshly formatted sd-card smaller than 2 gb (although I think that won't have any effect); you can also try renaming kovsimg.nbh with all small letters, all capitals or the way you just spelled it. It might be important.
offtopic: I get your point on the reactions you get when opening new threads. Everything is simple when you now where to look or if you've done it before, but it can be very hard to find the answer when there's so much info to choose from.
That said: a topic title of something like "having trouble flashig a custom rom to prototype" sounds a bit more serious then "need massive help" with a lot of exclamation marks. That might set people off on the wrong foot.
Hi,
Hope someone can help.
Been trying to instal Dutty's wm6.5 R12 rom on my touch hd but whatever I try, it just gets stuck at the screen with the bar and stay at 0%.
I have searched the forum and tried almost everything I could find. SSPL HSPL USPL and all won't work.
Anyone have any ideas for a noob?
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
jigners said:
i doubt if you can find someone who can guide you step by step, i suggest you study more, i was like you before, but i just persevered, unti i was confident enough to flash my first cooked ROM. CAUSENOT ALL BLACKBONE, have the same default factory settings, different stock ROM versions and different spl.it does require time and patience, but in the end this will al l payback.
Click to expand...
Click to collapse
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
look, no one is being a smart ass here. in addition, your description of the the steps you've followed are very vague. my friend, we see 5-10 posts like this every day and in every case, the OP has missed/skipped one or two steps in the flashing process. simply stated, the guides WILL help you flash your device. if as you stated, "SSPL HSPL USPL and all won't work you have to complete this task first. you HAVE to update your SPL before you can flash Dutty's ROM. put your device in bootloader mode and if IT DOES NOT display the following, you will not be able to flash a ROM:
BLAC120 (or BLAC110) 32M
SPL-1.56.01 OliNex
MicroP-BlackStone (LED) v 6
you HAVE to complete this step before you can flash any WM 6.5 ROM. read the guides, make your own easy-to-understand-checklist and follow it to confirm you've completed ALL the steps. be patient and you'll succeed. as a reference, you can use the links in my signature to help you with the process. good luck.
Hi,
I not sure you read the Dummies guide yet.
[TUT] Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
Troubleshooting - manual SSPL
* Boot up your phone.
* Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
* Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
* When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
* Go to step HSPL3 if successful.
Try to follow this step. Copy the file to phone and boot from there. then u should be able to do so.
Hi guys and girls,
thanks for trying to help. I do understand that people like me who are new to flashing a cooked rom will ask many silly questions. I'll try and formulate better which steps I have done.
I noticed on my bootloader screen that I have spl-1.54.0000. I therefor downloaded the file SSPL-Manual-TouchHD.zip and transfered the exe file to my phone memory. I then started it on my phone. It starts the bootloader screen and tells me:
BLAC100 MFG 32M SS-BC
1.07.0liNex XA
MicroP-Blackstone (LED) v6
From hereon I have tried to run USPL but it tells me it cannot connect due to faulty USB drivers which I have updated with the supplied drivers as indicated. Even with a different cable and a different USB port, USPL will not connect.
I have also tried to run the RUU HSPLWrapper_Blackstone_156OliNex.exe but it then starts the screen with the percentage bar and gets stuck. After a few minutes it comes with either error 260 or 262 wicht is an update failure I have read. Just the fix to start over again and reset your systems didn't do anything for me.
Since I know that poeple are able to use this rom I am defenite that it is by my own shortcommings that I can't seem to do it. But after having tried a lot, I can not see what I am doing wrong anymore.
Hope this is a better explenation and thanks sofar already.
Ps: I have tried both USPL3 and USPL5 from http://forum.xda-developers.com/showpost.php?p=3930878&postcount=3. I just can't seem to connect with USPL.
If you run win7 (and vista) x64 especially, loading unsigned drivers for usb doesnt work by default, this might be your problem.
You could try the following, boot you pc and just after the bios is loaded press F8 (or just keep pressing it multiple times) and a menu will appear which includes: "Disable Driver Signature Enforcement" try this, and after boot you should be able to make the usb drivers work, so reinstall them and try uspl (dont forget to not allow usb connections in windows mobile device center)
Hope this helps, if not, move along
RainerG said:
yeah, this realy helps. Why do people bother to reply if they have no awnser.
I mean I have read those guides on the forum and been busy for a week on it now. I know what spl version I have and which version of hard spl i would need and so on. But it just will not open up.
So if there is someone out there that wouldn't mind HELPING me I would realy apreciate it. But just telling me to search better is no help at all. I have searched with all terms I know but haven't found the right soulution by myself. That is why I ask for HELP, not for smart asses.
Click to expand...
Click to collapse
I take exception to this. No need to be a smart a**. Obviously jigners was only trying to help, like others before.
If your having difficulty your queries should be directed to the dummies guide thread where people like myself as well as other expereienced users will be more than happy to help you. No need to create a new thread for queries that have been asked umpteen times before.
Thread closed
I am super new to this. I have 2 att tilts I followed a guide on this site and flashed them both to windows 6.5. both seemed to be working fine. My wifes had no sound though. So I searched and realized hers had an older radio than mine. I followed another guide here to update her radio. (I picked the same one as mine 1.65.21.18) I tried the sim card first and nothing happened so I tried it via sync. It got to 99% and errored. I followed the on screen commands and the second time I got 0% and errored. Now the phone is stuck in the multi color boot screen and nothing I do fixes it. I have tried searching and cant fix it. I dont know what mtty is. Please help!!!
fragnbastich said:
I am super new to this. I have 2 att tilts I followed a guide on this site and flashed them both to windows 6.5. both seemed to be working fine. My wifes had no sound though. So I searched and realized hers had an older radio than mine. I followed another guide here to update her radio. (I picked the same one as mine 1.65.21.18) I tried the sim card first and nothing happened so I tried it via sync. It got to 99% and errored. I followed the on screen commands and the second time I got 0% and errored. Now the phone is stuck in the multi color boot screen and nothing I do fixes it. I have tried searching and cant fix it. I dont know what mtty is. Please help!!!
Click to expand...
Click to collapse
to fixing bricked kaisers with MTTY commands looks at http://forum.xda-developers.com/showthread.php?t=371154&page=5
Thanks. I'll check this out.
Once again it says run mtty. What is mtty? is it a program? if so can I get a link? i googled mtty and there is a download but im afraid it might be a virus so if anybody here has a safe link id appreciate it...
fragnbastich said:
Once again it says run mtty. What is mtty? is it a program? if so can I get a link? i googled mtty and there is a download but im afraid it might be a virus so if anybody here has a safe link id appreciate it...
Click to expand...
Click to collapse
MTTY is a program command ....here use it
Thanks for the program, when I open it and go to usb and type command boot i get
Cmd>boot
Command error !!!
I also have ruunbh in top corner I followed the link on the tutorial to download an original kaiser rom but there were none....
ok I typed
set 16 0
then
task 8
My phone rebooted to windows 6.5 but still has wrong radio. I am afraid to try and change radio. is there a link to a step by step procedure that works. did i pick the wrong radio?
TPC_Kaiser_Titanium_Ultimate_28002 is rom
Kaiser_Radio_only_1.65.21.18 is the radio that i tried to do last time...
r-1.27.14.09 is radio it has now...
http://blog.contriving.net/2009/06/18/upgrading-your-att-tilt-to-windows-mobile-6-5-tutorial/
is the tutorial i followed to flash rom. I am not sure if i installed Hard SPL i followed that tutorial. I did jumpspl 1.56...
fragnbastich said:
ok I typed
set 16 0
then
task 8
My phone rebooted to windows 6.5 but still has wrong radio. I am afraid to try and change radio. is there a link to a step by step procedure that works. did i pick the wrong radio?
TPC_Kaiser_Titanium_Ultimate_28002 is rom
Kaiser_Radio_only_1.65.21.18 is the radio that i tried to do last time...
r-1.27.14.09 is radio it has now...
http://blog.contriving.net/2009/06/18/upgrading-your-att-tilt-to-windows-mobile-6-5-tutorial/
is the tutorial i followed to flash rom. I am not sure if i installed Hard SPL i followed that tutorial. I did jumpspl 1.56...
Click to expand...
Click to collapse
If you are not sure how to use MTTY, please don't use it. This is a powerful tool and if its not used correctly you can definitely bricked your device. Try to read first of what you do.
I have spent hours reading and searching posts the last couple of days. If you have a helpful answer for me feel free to post it! I followed the tuorials exactly. Not to mention I already DID USE MTTY and it worked! Now I need to change the radio... All I need to know is if I need to run hard spl first or jump spl? The tutorial I followed just had me run jump....
PS. I don't need to become an expert I am only updating to sell these phones on ebay. You get more for them with windows 6.5. Once I get them working I am selling them and will never use these tools again. I switched from ATT to Virginusa and an android phone...